aboutsummaryrefslogtreecommitdiff
path: root/package/kernel
Commit message (Collapse)AuthorAge
...
* kernel: crypto: use ARM64 SHA256 CE optimized module for more targetsRobert Marko2024-03-08
| | | | | | | | | | | At start I only set qualcommax to use the Crypto Extensions optimized version of SHA256 as I knew it supports the optional Crypto Extensions. However, after looking into the tree there are more targets/subtargets that I could find at least a specification sheet that says the support Cryptographic Extensions, so lets add them. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: crypto: use ARM64 SHA1 CE optimized module for more targetsRobert Marko2024-03-08
| | | | | | | | | | | At start I only set qualcommax to use the Crypto Extensions optimized version of SHA1 as I knew it supports the optional Crypto Extensions. However, after looking into the tree there are more targets/subtargets that I could find at least a specification sheet that says the support Cryptographic Extensions, so lets add them. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath25: drop targetRobert Marko2024-03-07
| | | | | | | | | | | | | | ath25 has been on life support for the last couple of releases, eventually leading to marking it as source-only in 2023. It has been basically only touched to do a kernel bump so that we can make the new OpenWrt release which was a challenge due to small RAM amount. However, with the attempt of kernel 6.1 update it turns out that kernel cannot even finish booting due to RAM constraints, so its time to let this target go. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: crypto: add SHA512 ARM64 ASM optimized moduleRobert Marko2024-03-06
| | | | | | | | | | | Kernel has an ASM optimized version of SHA512 that was ported from OpenSSL, so lets package it as it provides significant perfomance improvement compared to the generic implementation. There is a Cryptographic Extension based version as well, but that relies on ARMv8.2 ISA which I am not aware any of the OpenWrt supported SoC-s use. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: crypto: add SHA2(224 and 256) ARM64 CE optimized moduleRobert Marko2024-03-06
| | | | | | | | | | Kernel has optimized version of SHA2(224 and 256) using the ARMv8 Crypto Extensions, so lets package it. Use it by default for qualcommax as it uses Cortex-A53 core and has ARMv8 CE extensions present. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: crypto: add SHA256 ARM64 ASM optimized moduleRobert Marko2024-03-06
| | | | | | | | Kernel has an ASM optimized version of SHA256 that was ported from OpenSSL, so lets package it as it provides significant perfomance improvement compared to the generic implementation. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: crypto: add SHA1 ARM64 CE optimized moduleRobert Marko2024-03-06
| | | | | | | | | | Kernel has optimized version of SHA1 using the ARMv8 Crypto Extensions, so lets package it. Use it by default for qualcommax as it uses Cortex-A53 core and has ARMv8 CE extensions present. Signed-off-by: Robert Marko <robimarko@gmail.com>
* cryptodev-linux: update to 1.13Weijie Gao2024-03-06
| | | | | | Update to 1.13 with upstream backports. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* kernel: qca-ssdk: refresh PCS patchRobert Marko2024-03-05
| | | | | | Recently added PCS patch requires a refresh, so lets do it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: crypto: package SHA3Robert Marko2024-03-05
| | | | | | | | | | | SHA3 is now required by jitterentropy_rng in kernel 6.6, so lets start preparing by packaging SHA3 support as its supported in 5.15 and 6.1 kernels as well. AFAIK, only ARMv8.2 has a crypto extension for SHA3, however I am not aware of any SoC we support that uses ARMv8.2 ISA so its not enabled currently. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: Remove dsmark supportJohn Audia2024-03-05
| | | | | | | dsmark support was removed in kernel 5.15.150 and 6.1.80. Remove it from the kmod package as well Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: lantiq: ltq-vmmc: introduce user group for vmmcDaniel Golle2024-03-03
| | | | | | | | | | | | asterisk-chan-lantiq is by now the only user of the VMMC interface. And asterisk runs as user 'asterisk' which doesn't give it permission to open the /dev/vmmc* devices. Introduce a new user group 'vmmc' and give permission to access the /dev/vmmc* devices to that group. Another commit for asterisk-chan-lantiq will add the 'asterisk' user to that group. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kirkwood: Add Marvell RTC to all machines with nothing elseLinus Walleij2024-02-29
| | | | | | | | | | | | | | | The Kirkwood SoCs all have an onchip RTC that can hold the time over e.g. a reboot which will help if no NTP servers are available. Create a kernel module package for the Marvell RTC, and add it to all Kirkwood devices that do not have their own discrete battery-backed RTC. Adding it to platforms with a proper RTC is just surplus. All Kirkwoods have at least one RTC so add RTC to the features list for Kirkwood as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mac80211: only build ath10k with smallbuffersEneas U de Queiroz2024-02-23
| | | | | | | | | | | | | | | | When both variants of ath10k drivers are selected, any driver that is selected along is being built twice, one for each ath10k variant. Avoid these redundant builds by introducing an optional second parameter to config_package that lists the variants for which the package is to be built. If the symbol is to be set for all of the variants, $(ALL_VARIANTS) can be used. This is the case for the mac80211 and cfg80211 modules. If the parameter is empty, then the module will be selected and thus built when the first variant is compiled. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mac80211: build each variant in its own dirEneas U de Queiroz2024-02-23
| | | | | | | | | | | | | | | | | | Having different build directories is the default when the package Makefile defines more than one variant. Mac80211 overrides PKG_BUILD_DIR, not taking different variants in consideration, which causes clobbering the directories when both variants are built. When compiled with AUTOREMOVE=y, the effect is that the package is unnecessarily rebuilt when the package is compiled again. Wihout AUTOREMOVE, the problem is worse: the second variant will not be rebuilt, and you end up with the smallbuffers variant being a copy of the regular one. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mac80211: ath11k: disable coldboot for ipq6018Mantas Pucka2024-02-21
| | | | | | | Coldboot calibration does not work at the moment and causes failure during wifi startup. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* qca-ssdk: support selecting PCS channel for PORT3 on IPQ6018Mantas Pucka2024-02-21
| | | | | | | | | | | | | | | When QCA8072 is used in PSGMII mode with IPQ6018, PCS used for second PHY port would overlap with one used by SGMII+ port. SoC has register to select different PCS in such case. Original code used PHY_ID for this decision, which also had other issues, but is no longer viable since we moved to upstream QCA807x driver. Introduce DT property port3_pcs_channel to allow describing this in DT. Default value is <2>, and for some QCA8072 designs <4> would be needed. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* mac80211: add a fix for racy drv_sta_rc_update callsFelix Fietkau2024-02-21
| | | | | | Fixes potential crash issues in mt76 and other drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add AQL support for broadcast/multicast packetsFelix Fietkau2024-02-21
| | | | | | Should improve performance/reliability with lots of mcast packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to 6.6.15Robert Marko2024-02-21
| | | | | | | Update backports to the latest 6.6 point release. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add driver for Airoha EN8811H PHY as moduleDaniel Golle2024-02-15
| | | | | | | | Add PHY driver for Airoha EN8811H PHY and package it as kernel module. The PHY needs to load firmware from rootfs, so there is no point in having the driver built-into the kernel. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qca-ssdk: drop not used Malibu PHY patchRobert Marko2024-02-15
| | | | | | | Now that Malibu (QCA807x) PHY-s use an upstream driver we dont need support for defining address of the first PHY in the package so drop the patch. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qca-ssdk: drop deprecated Xiaomi LEDs quirk patchChristian Marangi2024-02-11
| | | | | | | Drop deprecated Xiaomi LEDs quirk patches as they are not needed anymore as LEDs are now supported by the upstream qca807x driver. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* qca-ssdk: add patch to support detection of PSGMII mode for PHYChristian Marangi2024-02-11
| | | | | | | | | | | If a PHY doesn't use the integrated driver, SSDK use poll the phydev to get the real PHY mode. qca807x use PSGMII as PHY mode and this specific mode is not detected in qca SSDK while used in the entire driver. Add support for it in the hsl_port_phydev_interface_mode_status_get function used to translate PHY mode to the internal SSDK value. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* qca-ssdk: disable Malibu PHY in favor of upstream versionChristian Marangi2024-02-11
| | | | | | | | | | Disable Malibu PHY driver in Qca SSDK in favor of the upstream version. The same workaround are applied and the version upstream is just a drop in replacement and is well tested from the ipq40xx target. Also using the upstream version permits further support for LEDs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* qca-ssdk: add support for ipq60xxRobert Marko2024-02-09
| | | | | | | | | IPQ60xx uses a different codename for SSDK, so lets pass the correct one as otherwise SSDK asumes we are building for the old MIPS SoC-s. Signed-off-by: Robert Marko <robimarko@gmail.com> [ drop outdated commit description info ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: modules: video: add missing video-mem2mem symbolÁlvaro Fernández Rojas2024-02-05
| | | | | | v4l2-mem2mem.ko needs CONFIG_V4L2_MEM2MEM_DEV symbol. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: modules: video: add missing video-videobuf2 symbolÁlvaro Fernández Rojas2024-02-05
| | | | | | videobuf2-v4l2.ko needs CONFIG_VIDEOBUF2_V4L2 symbol. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: modules: video: remove v4l2-common from video-coreÁlvaro Fernández Rojas2024-02-05
| | | | | | | v4l2-common.ko was merged into videodev.ko and no longer exists. Fixes: ac5671f46cb4 ("kernel: remove obsolete kernel version switches for 4.19") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mt76: update to Git HEAD (2024-02-03)Felix Fietkau2024-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a9693e1979c2 linux-firmware: add firmware for MT7996 0258dc90e3a1 wifi: mt76: mt7603: fix reading target power from eeprom 3e81173d9e2b wifi: mt76: mt7603: initialize chainmask 786a339bac36 wifi: mt76: mt7996: fix fortify warning bc37a7ebc267 wifi: mt76: mt7996: fix fw loading timeout 027bab6a88a3 wifi: mt76: usb: create a dedicated queue for psd traffic e8909c610c3b wifi: mt76: usb: store usb endpoint in mt76_queue 8b3d96fa4ead wifi: mt76: mt792xu: enable dmashdl support 7864d7ad0ed0 wifi: mt76: mt76x2u: add netgear wdna3100v3 to device table 27c81f7c1480 wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band b7443c63069a wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band bab721a65f5a wifi: mt76: mt7925: fix mcu query command fail 1f0f71ed81e8 wifi: mt76: mt7925: fix wmm queue mapping bcfe2ad966f3 wifi: mt76: mt7925: fix fw download fail f982c3d67a29 wifi: mt76: mt7925: fix WoW failed in encrypted mode 6a72716ec213 wifi: mt76: mt7925: fix the wrong header translation config 50928b7e1359 wifi: mt76: mt7925: add flow to avoid chip bt function fail 762ab4530e8f wifi: mt76: mt7925: add support to set ifs time by mcu command 87deaf82efa4 wifi: mt76: mt7925: update PCIe DMA settings c190c1576522 wifi: mt76: mt7925: support temperature sensor 025d5734caba wifi: mt76: mt7996: check txs format before getting skb by pid 4768bfa2baca wifi: mt76: mt7996: fix TWT issues a65e3eced907 wifi: mt76: mt7996: disable AMSDU for non-data frames d71716d93aee wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps f21728f3f4bd wifi: mt76: mt7996: ensure 4-byte alignment for beacon commands 68dad7dacd2a wifi: mt76: mt7996: fix HE beamformer phy cap for station vif 66a28f340cdc wifi: mt76: mt7996: mark GCMP IGTK unsupported b47ad8a7764e wifi: mt76: mt7996: fix efuse reading issue c2fc7dae7b72 wifi: mt76: mt7996: remove TXS queue setting e0f1ed168ed5 wifi: mt76: mt7996: add locking for accessing mapped registers d0cc92c1fd08 wifi: mt76: connac: set correct muar_idx for mt799x chipsets ae0c62279adc wifi: mt76: mt7996: fix HIF_TXD_V2_1 value ecc14276af54 wifi: mt76: mt792x: fix ethtool warning 9827df56b241 wifi: mt76: move wed common utilities in wed.c dccbd2598505 wifi: mt76: mt7925: fix the wrong data type for scan command 9907f4f20261 wifi: mt76: mt792x: add the illegal value check for mtcl table of acpi 1b088a7ac06d wifi: mt76: mt7921e: fix use-after-free in free_irq() f3c5b4820d7f wifi: mt76: mt7925e: fix use-after-free in free_irq() d75eac9f5531 wifi: mt76: mt7921: fix incorrect type conversion for CLC command 7bd5401f5bb1 wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI ea55196bc4a0 wifi: mt76: mt792x: update the country list of EU for ACPI SAR 6124ea9135ed wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspend Signed-off-by: Felix Fietkau <nbd@nbd.name>
* broadcom-wl: remove packageFelix Fietkau2024-02-03
| | | | | | | Also remove remaining wireless extension support, since this package was the only in-tree user of it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wifi-scripts: add new package, move wifi scripts to a single placeFelix Fietkau2024-02-03
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: modules: video: fix video-coda for 6.1Tim Harvey2024-02-02
| | | | | | | The coda kernel modules were moved between 5.15 and 6.1. Adapt the coda-vpu and imx-vdoa modules for that. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix drm-imx for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 changed DRM_GEM_DMA_HELPER to a module (drm_dma_helper.ko). Add this to the drm-imx to fix module dependencies. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix kmod-imx-pxp build for 6.1Lech Perczak2024-02-02
| | | | | | | Location of the module file was changed between 5.15 and 6.1. Adapt the recipe for that. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: modules: video: fix video-core for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 wraps core video drivers in a MEDIA_PLATFORM_DRIVERS submenu. Enable that for 6.1 and add some new necessary undefines to target/linux/generic/config-6.1 to avoid build failures. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix kmod-video-imx-ldb build under 6.1Lech Perczak2024-02-02
| | | | | | | drm_dp_aux_bus.ko isn't built or required anymore under kernel 6.1. Mark that in the recipe. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: modules: video: fix deps for kmod-drm-imx-hdmi for 6.1Lech Perczak2024-02-02
| | | | | | | kmod-drm-imx-hdmi depends on kmod-drm-display-helper since 6.1. Include that in OpenWrt's recipes. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* lantiq: add support for AVM Fritzbox 7490Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 7490 device. It contains two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module and is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem Unsupported: - DECT and ISDN telephony Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* kernel: move gpio packages to gpio menuChukun Pan2024-02-01
| | | | | | Move gpio packages to the 'GPIO support' menu. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: modules: move gpio modules to gpio menuChukun Pan2024-02-01
| | | | | | | | Since we have the 'GPIO support' menu, it is strange to look up gpio related modules in 'Other modules' menu. So move these modules and put them in the gpio menu. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: modules: gpio.mk: renamed from gpio-cascade.mkChukun Pan2024-02-01
| | | | | | This can be used to place the gpio module, so rename it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* qca-ssdk: disable compiling qca8081 PHY driver in favor of upstreamChristian Marangi2024-01-27
| | | | | | | Disable compiling qca8081 PHY driver in favor of upstream to better support it and add better control of attached LEDs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mac80211: brcm: fix warning on ARCH_BCM2835Álvaro Fernández Rojas2024-01-27
| | | | | | | | | Completely disable dump_survey code on ARCH_BCM2835 to fix defined but not used warning. https://github.com/openwrt/openwrt/commit/512b762ddbb602b744f0e7a443cf4ac7422155c1?w=1#commitcomment-137899352 Fixes: 512b762ddbb6 ("mac80211: brcm: disable dump_survey on Raspberry Pi") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: brcm: disable dump_survey on Raspberry PiÁlvaro Fernández Rojas2024-01-26
| | | | | | | | Enabling this causes slow iwinfo calls on Raspberry Pi and LuCI slows down when wireless is enabled. Fixes: https://github.com/openwrt/openwrt/issues/14013 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: brcm: remove alternative DT firmware names patchÁlvaro Fernández Rojas2024-01-26
| | | | | | | This patch has been reverted in the Raspberry Pi linux repository. Also refresh the rest of the patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: 5.15: backport upstream Aquantia PHY firmware loader patchesChristian Marangi2024-01-26
| | | | | | | | | | | | | | Backport merged upstream patch that adds support for firmware loader from NVMEM or attached filesystem for Aquantia PHYs. Refresh all kernel patches affected by this change. Also update the path for aquantia .ko that got moved to dedicated directory upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [rmilecki: port to 5.15] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: fix typo in getting path from board.jsonFelix Fietkau2024-01-26
| | | | | | | Use json_get_vars in order to avoid getting bogus values when extra properties are present Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove obsolete functionFelix Fietkau2024-01-25
| | | | | | Leftover from authsae, which was removed a long time ago Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to Git HEAD (2024-01-18)Felix Fietkau2024-01-19
| | | | | | | | | | | | | | 83e3947e2c52 linux-firmware: update firmware for MT7922 WiFi device ddaa8cb6e81a linux-firmware: update firmware for MT7921 WiFi device f83b1601cc10 linux-firmware: update firmware for MT7922 WiFi device 61d334ab0f33 linux-firmware: add firmware for MT7925 a7836e4c8a60 wifi: mt76: disable HW AMSDU when using fixed rate a8571ebbcd95 wifi: mt76: check txs format before getting skb by pid 3d5890e2cab3 wifi: mt76: mt7915: fix error recovery with WED enabled 703c26d01197 wifi: mt76: mt7915: add locking for accessing mapped registers f77188160441 wifi: mt76: mt7915: update mt798x_wmac_adie_patch_7976 Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Themed by Ted Yin.