aboutsummaryrefslogtreecommitdiff
path: root/target/linux/ramips
Commit message (Collapse)AuthorAge
* ramips: remove unnecessary macros for previous kernel versionsMieczyslaw Nalewaj2024-05-03
| | | | | | | | | | Remove unnecessary 'if' macros for previous kernel versions. After removing kernel 6.1 the kernel is always >= 6.6 so the conditions are unnecessary. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> [removed some more and also no longer include version.h] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: switch to Linux 6.6Daniel Golle2024-05-03
| | | | | | | Switch to Linux kernel version 6.6 and drop configs, files and patches for Linux 6.1. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: mt7621-dts: describe switch PHYs and adjust PHY muxingArınç ÜNAL2024-05-01
| | | | | | | | | | | | | | | | | | | | | | | | Currently, the MT7530 DSA subdriver configures the MT7530 switch to provide direct access to switch PHYs, meaning, the switch PHYs listen on the MDIO bus the switch listens on. The PHY muxing feature makes use of this. This is problematic as the PHY may be attached before the switch is initialised, in which case, the PHY will fail to be attached. Since commit 91374ba537bd ("net: dsa: mt7530: support OF-based registration of switch MDIO bus") on mainline Linux, we can describe the switch PHYs on the MDIO bus of the switch on the device tree. When the PHY is described this way, the switch will be initialised first, then the switch MDIO bus will be registered. Only after these steps, the PHY will be attached. Describe the switch PHYs on mt7621.dtsi and remove defining the switch PHY on the SoC's mdio bus node. When the PHY muxing is in use, the interrupts for the muxed PHY won't work, therefore delete the "interrupts" property on the devices where the PHY muxing feature is in use. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: mt7621-dts: remove incorrect ethphy4 node for WAVLINK WL-WN573HX1Arınç ÜNAL2024-05-01
| | | | | | | The ethernet-phy@4 node doesn't exist for WAVLINK WL-WN573HX1. Remove it and the duplicate gmac0 node. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: mt7621-dts: do not modify ethernet node for MeiG SLT866Arınç ÜNAL2024-05-01
| | | | | | | | | | Currently, the pinctrl-0 property on the ethernet node is modified to exclude the rgmii1 and rgmii2 pin groups to be claimed with rgmii1 and rgmii2 functions, respectively. Remove the modification of this property as we need these pin groups to be claimed with the said functions for this device. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* generic: MIPS64: fix detect_memory_region() compilation errorShiji Yang2024-04-30
| | | | | | | | | 1. Enable this feature only for 32-bit CPUs as MIPS64 can not access the full range unmapped uncached memory. 2. Backport this fix to the 6.1 old LTS kernel. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: bump 6.6 to 6.6.29John Audia2024-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.29 Removed upstreamed: generic/backport-6.6/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch[1] generic/backport-6.6/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch[2] generic/backport-6.6/790-29-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch[3] generic/backport-6.6/790-31-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch[4] generic/backport-6.6/790-34-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch[5] generic/backport-6.6/790-35-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch[6] mediatek/patches-6.6/963-net-ethernet-mtk_eth_soc-fix-WED-wifi-reset.patch[7] Manually rebased: generic/backport-6.6/790-23-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=a2471d271042ea18e8a6babc132a8716bb2f08b9 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=4ed82dd368ad883dc4284292937b882f044e625d 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=21b9d89d93422221cdda1b82fd075fa3c94a11d9 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=bd41ee1efd478852a0882ce5f136bc2b5e83eff2 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=d1be3960539249a8690ed09a29d0e3bf34189dd2 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=f8de1b6208bf71bd3102548d33dd8475573ad2ea 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=6855f724f19620c3ddff57c349e0abba797475b1 Build system: x86/64 Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: Add support for D-Link DIR-3040 A1Vince McKinsey2024-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the A1 hardware revision of the DIR-3040. It is an exact copy of the DIR-3060 save for some cosmetic changes to the housing. Even going so far as having the same FCC ID. Hardware specification: SoC: MediaTek MT7621AT Flash: Winbond W29N01HVSINA 128MB RAM: Micron MT41K128M16JT-125 256MB Ethernet: 5x 10/100/1000 Mbps WiFi1: MT7615DN 2.4GHz N 2x2:2 WiFi2: MT7615DN 5GHz AC 2x2:2 WiFi3: MT7615N 5GHz AC 4x4:4 Button: WPS, Reset Flash instructions: OpenWrt can be installed via D-Link Recovery GUI: NOTE: Seems to only work in Firefox on Windows. Tried with Chrome on Windows, Firefox in Linux, and Chromium in Linux. None of these other browsers worked. 1. Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. 2. Give it ~30 seconds, to boot the recovery mode GUI 3. Connect your client computer to LAN1 of the device 4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0. 5. Call the recovery page for the device at http://192.168.0.1/ 6. Use the provided emergency web GUI to upload and flash a new firmware to the device Thanks to @Lucky1openwrt and @iivailo for creating the DIR-3060 DTS file and related changes, so it was possible for me to adapt them to the DIR-3040, build images, test and fix minor issues. MAC Addresses: | use | address | example | | --- | --- | --- | | LAN | label | f4:*:61 | | WAN | label + 4 | f4:*:65 | | WI1/2g | label + 2 | f4:*:63 | | WI1/5g | label + 1 | f4:*:62 | | WI2/5g | label + 3 | f4:*:64 | The label MAC address was found in Factory, 0xe000 Checklist: ✓ nand ✓ ethernet ✓ button ✓ wifi2g ✓ wifi5g ✓ wifi5g ✓ mac ✓ led Signed-off-by: Vince McKinsey <vincemckinsey@gmail.com>
* ramips: add support for TP-Link EC220-G5 v2Mieczyslaw Nalewaj2024-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link EC220-G5 v2 is a dual band router with 4 GbE ports Advertised as AC1200 for its 867Mbps (2x2) 5GHz band and 300 Mbps (2x2) 2.4GHz band. Specs: - SoC: MediaTek MT7620A - Ethernet: 4x GbE ports (Realtek RTL8367S) - Wireless 2.4GHz: MediaTek MT7620A - Wireless 5GHz: MediaTek MT7612E - RAM: 64MiB - ROM: 8MiB (W25Q64BV) - 2 Buttons (WPS and reset) - 7 LEDs Flash instructions via serial console: 1. Rename the factory.bin to to test.bin 2. start a TFTP server from IP address 192.168.0.225 and serve the image named test.bin 3. connect your device to the LAN port 4. power up the router and press 4 on the console to stop the boot process. 5. enter the following commands on the router console tftp 0x80060000 test.bin erase tplink 0x20000 0x7a0000 cp.b 0x80060000 0x20000 0x7a0000 reset Flash instructions via TFTP: 1. Update orginal firmware of the router to the latest one. 2. Rename openwrt-ramips-mt7620-tplink_ec220-g5-v2-squashfs-tftp-recovery.bin to tp_recovery.bin 3. Change computer IP to 192.168.0.66 4. Run TFTP serwer 5. Start the router with the reset button pressed, the file will be automatically downloaded and after a while the router will restart. 6. After updating, set your computer's IP to DHCP Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: mt7620a_tplink_archer.dtsi rename to mt7620a_tplink_8m.dtsiMieczyslaw Nalewaj2024-04-13
| | | | | | Change the name mt7620a_tplink_archer.dtsi to mt7620a_tplink_8m.dtsi because it will also be a base for TP-Link non-Archer routers. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: TP-Link Archer C2 v1: simplification of the dts definitionMieczyslaw Nalewaj2024-04-13
| | | | | | Import from the mt7620a_tplink_archer.dtsi file and thus simplify the rest of the definition. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: mt7620a_tplink_archer.dtsi - remove unnecessary nvmem-cells definitionsMieczyslaw Nalewaj2024-04-13
| | | | | | Remove unnecessary nvmem-cells definitions that are being redefined anyway. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: set testing kernelMieczyslaw Nalewaj2024-04-05
| | | | | | Allow selecting 6.6 as testing kernel on ramips. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: refresh kernel configMieczyslaw Nalewaj2024-04-05
| | | | | | Refresh kernel config. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: adjusted pinctrl-aw9523 for kernel 6.6Mieczyslaw Nalewaj2024-04-05
| | | | | | | | Compatiblity with kernel 6.6 for Awinic AW9523B i2c pin controller driver. It follows the kernel patch: i2c: Drop legacy callback .probe_new() (https://github.com/torvalds/linux/commit/5eb1e6e459cfa025f79c43014f66ff62a55542f1) and kernel patch: gpiolib: Get rid of not used of_node member (https://github.com/torvalds/linux/commit/70d0fc4288dabd65025fde7774b4f9262afa9034) Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: mt7620: alignment with updated snd_soc_dai_driver structureMieczyslaw Nalewaj2024-04-05
| | | | | | | Fix error: 'struct snd_soc_dai_driver' has no member named 'remove' It follows the kernel patch: ASoC: soc-dai.h: remove unused call back functions (https://github.com/torvalds/linux/commit/446b31e894935ebbcf84302061a4e0e2efb2368f) Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: fix net drivers compatibilityMieczyslaw Nalewaj2024-04-05
| | | | | | | Fix compatibility of ralink net drivers with kernel 6.6. It follows the kernel patch: u64_stats: Streamline the implementation (https://github.com/torvalds/linux/commit/44b0c2957adc62b86fcd51adeaf8e993171b) Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: refresh patchesMieczyslaw Nalewaj2024-04-05
| | | | | | Refresh kernel patches. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: remove old patchesMieczyslaw Nalewaj2024-04-05
| | | | | | Remove patches for old kernel. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Restore kernel files for v6.1Mieczyslaw Nalewaj2024-04-05
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Create kernel files for v6.6 (from v6.1)Mieczyslaw Nalewaj2024-04-05
| | | | | | | | This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Restore kernel patches for v6.1Mieczyslaw Nalewaj2024-04-05
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Create kernel patches for v6.6 (from v6.1)Mieczyslaw Nalewaj2024-04-05
| | | | | | | | This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: add support for BOLT BL100Radito Wahyu2024-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BL100 is a router made by Bolt by a provider in Indonesia The original firmware created using Mediatek SDK and kernel 2.6.36 - Chipset: MediaTek MT7620A ver 2, eco 6 - RAM: 64 MB - Bootloader: U Boot - Flash: Winbond W25Q128BV (16 MB) - Ports: 2x 10/100 Ethernet, 1x RJ-11 VoIP - Modem: Qualcomm LTE B40 (2300 Mhz) VID:05c6 PID:9026 - Wireless: Internal MT7620A (2.4 Ghz) & Mediatek MT76x2E (5.8 Ghz) - Switch: MediaTek MT7620A built-in 5-port 10/100M switch - Voltage: DC 12V 1A - Antenna Port: 2x External Antenna, 2 LTE U.FL, 2 WiFi U.FL - Serial Port: Yes, 3.3 V TTL, Baud 57600 8N1 - Buttons: Reset and WPS - LED: 15 Total - 4 blue lte, 2 red lte, 1 reset, 1 power. - 1 wps, 1 voip, 1 wlan2, 1 wlan5, 1 lan, 1 wan, 1 wlan. Installation via stock firmware 1. Unlock Telnet access by downloading the backup .tar.gz file 2. Change the Telnet configuration to LAN_Telnet=1 3. Import backup configuration 4. Restart the router 5. Login to telnet with username and password = admin : db40 6. Download sysupgrade binary and mtd_write to the kernel partition `mtd_write write openwrt-bolt_bl100-squashfs-sysupgrade.bin Kernel` Signed-off-by: Radito Wahyu <arditogits@gmail.com>
* ramips: mt7620a_tplink_archer-c5-v4: use LED_FUNCTION_WLAN_2GHZ and ↵Mieczyslaw Nalewaj2024-03-29
| | | | | | | | LED_FUNCTION_WLAN_5GHZ Use LED_FUNCTION_WLAN_2GHZ and LED_FUNCTION_WLAN_5GHZ instead function-enumerator Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: add support for TP-Link RE205 v3Steffen Loley2024-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE205 v3 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with external antennas. It's based on MediaTek MT7628AN+MT7610EN like the RE200 v3/v4 but with external antennas. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 5x LED (GPIO-controlled), 2x button - UART connection holes on PCB (57600 8n1) There are 2.4G and 5G LEDs in blue which are controlled separately. Installation ------------ Installation is identical to RE200 v3 devices as described at https://openwrt.org/toh/tp-link/re200#installation Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- U-Boot seems to be locked on newer versions, if not it can be accessed over the UART as described in the link above. Signed-off-by: Steffen Loley <slo-src@web.de>
* ramips: mt7621: disable Edgerouter X image generationRobert Marko2024-03-20
| | | | | | | | | | With kernel 6.1 image size is too large for Edgerouter X current size limit and is causing the buildbots to fail building so images for other devices are not updated as well. So, disable building Edgerouter X images until a workaround is found. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ramips: 5.15: delete remaining filesNick Hainke2024-03-13
| | | | | | | | Remove the remaining configuration entries that were omitted in the previous commit. Fixes: 1576474f55e9 ("ramips: switch to 6.1 kernel") Signed-off-by: Nick Hainke <vincent@systemli.org>
* ramips: add support for Z-ROUTER ZR-2660Mikhail Zhilkin2024-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Z-ROUTER ZR-2660 (also known as Routerich AX1800) wireless WiFi 6 router. Specification ------------- - SoC : MediaTek MT7621AT, MIPS, 880 MHz - RAM : 256 MiB - Flash : NAND 128 MiB (AMD/Spansion S34ML01G2) - WLAN : - 2.4 GHz : MediaTek MT7905D/MT7975 (14c3:7916), b/g/n/ax, MIMO 2x2 - 5 GHz : MediaTek MT7915E (14c3:7915), a/n/ac/ax, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x4 (1x WAN, 3x LAN) - USB : 1x 2.0 - UART : 3.3V, 115200n8, pins are silkscreened on the pcb - Buttons : 1x Reset - LEDs : 1x WiFi 2.4 GHz (green) 1x WiFi 5 GHz (green) 1x LAN (green) 1x WAN (green) 1x WAN no-internet (red) - Power : 12 VDC, 1 A Installation ------------ 1. Run tftp server on your PC (IP: 192.168.2.2) and put OpenWrt initramfs image (initramfs.bin) to the tftp root dir 2. Open the following link in the browser to enable telnet: http://192.168.2.1/cgi-bin/telnet_ssh 3. Connect to the router (default IP: 192.168.2.1) using telnet shell (credentials - user:admin) 4. Run the following commands in the telnet shell (this will install OpenWrt initramfs image on nand flash): cd /tmp tftp -g -r initramfs.bin 192.168.2.2 mtd write initramfs.bin firmware mtd erase firmware_backup reboot 5. Copy OpenWrt sysupgrade image (sysupgrade.bin) to the /tmp dir of the router 6. Connect to the router (IP: 192.168.1.1) using ssh shell and run sysupgrade command: sysupgrade -n /tmp/sysupgrade.bin Return to stock --------------- 1. Copy stock firmware (stock.bin) to the /tmp dir of the router using scp 2. Run following command in the router shell: cd /tmp mtd write stock.bin firmware reboot Recovery -------- Connect uart (pins are silkscreened on the pcb), interrupt boot process by pressing any key, use u-boot menu to flash stock firmware image or OpenWrt initramfs image. MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | 24:0f:5e:xx:xx:4c | label | | WAN | 24:0f:5e:xx:xx:4d | label+1 | | WLAN 2g | 24:0f:5e:xx:xx:4e | label+2 | | WLAN 5g | 24:0f:5e:xx:xx:4f | label+3 | +---------+-------------------+-----------+ The WLAN 2.4 MAC was found in 'factory', 0x4 The LAN MAC was found in 'factory', 0xfff4 The WAN MAC was found in 'factory', 0xfffa Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: add support for YunCore G720Daniel Golle2024-03-12
| | | | | | | | | | | | | | | | | | | | The YunCore G720 is a dual band 802.11ax router with 5 GbE ports. Specs: - SoC: MediaTek MT7621 - Ethernet: 5x GbE ports (built-in MT7530) - Wireless 2.4GHz / 5GHz: MediaTek MT7915E - RAM: 256MiB - ROM: 16MiB (W25Q128) - 1 Button (reset) - 8 LEDs (1x system, 2x wifi, 5x switch ports) Flash instructions: The vendor firmware is based on OpenWrt, the sysupgrade image can be flashed using the '-F' (force) option on the CLI. Make sure not to keep settings when doing so. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: switch to 6.1 kernelNick Hainke2024-03-12
| | | | | | | We have had the testing kernel for several weeks now. Let's switch to 6.1 to have more testers. Additionally, 6.6 is already in the pipeline. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: bump 6.1 to 6.1.81John Audia2024-03-11
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.81 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: improve support for STORYLiNK SAP-G3200U3Sungbo Eo2024-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Increase flash SPI frequency to 50MHz The maximum SPI frequency of MX25L6406EM2I is 86 MHz, but in this patch 50 MHz was chosen as a safe value. * Update Ethernet MAC addresses Till now LAN/WAN MAC addresses were flipped compared to stock firmware. * Fix Wi-Fi LEDs by adding mt76 led nodes * Fix LAN port order LAN ports are in reverse order of switch ports. * Fix the well-known "LZMA ERROR 1" error by using lzma-loader * Set uImage name, which enables installation via stock web interface: 1. Upload **initramfs** image file to the web page. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add factory image for ipTIME AX2004MSungbo Eo2024-03-10
| | | | | | | | | | | | | Unlike the recovery image, this initramfs-factory image can be flashed using the stock firmware web interface (from any active boot partition), as well as the bootloader recovery web page. Drop the recovery image in favor of the factory image. Installation via stock/recovery web interface: 1. Flash **initramfs-factory** image through the web page. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt7621: use variable for relocate-kernel argumentSungbo Eo2024-03-10
| | | | | | | | The "0x80001000" address logically comes from "loadaddr-y" variable for mt7621 subtarget. Let's replace the hardcoded value with the predefined variable. This change is purely cosmetic. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: rename mtd partition of ipTIME NAND devicesSungbo Eo2024-03-10
| | | | | | | | | | | | Contrary to common ipTIME NOR devices, the "Config" partition of T5004 and AX2004M contain normal U-Boot environment variables. Renaming the partition into "u-boot-env" serves for better description, and it also conforms to common naming practice in OpenWrt. This patch might also be extended to A3004T, but its u-boot-env partition layout has not been confirmed yet. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add NMBM support for ipTIME AX2004MSungbo Eo2024-03-10
| | | | | | | | | | | | | | | | AX2004M uses NMBM on its NAND flash, but it was not enabled in DTS as the device support [1] had been added before NMBM feature in mtk_bmt driver [2]. Let's enable it now. With this change, there is a low possibility of boot failure after sysupgrade from older versions. As AX2004M already has gone through two stable releases in the meantime, it would be safe to warn users by bumping DEVICE_COMPAT_VERSION. [1] 37753f34ac68 ("ramips: add support for ipTIME AX2004M") [2] 06382d1af7b2 ("kernel: add support for mediatek NMBM flash mapping support") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: Unielec u7621-01: remove invalid led statusDavid Bentham2024-03-02
| | | | | | | | | | The original commit had an invalid setting of the led status for this device. There is no gpio pin connected to that led so lets remove these from the u7621-01 dtsi file. Signed-off-by: David Bentham <db260179@gmail.com>
* ramips: fix nvmem-cells for routers based on TP-Link ArcherMieczyslaw Nalewaj2024-02-29
| | | | | | Added missing nvmem-cells located in the loaded file mt7620a_tplink_archer.dtsi Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: removing unnecessary compatibility for TP-Link Archer C2 v1Mieczyslaw Nalewaj2024-02-27
| | | | | | | Removing: compatible = "rtl8367b" This string is not used anywhere in the code. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: TP-Link Archer C5 v4: license and file formatting fixesMieczyslaw Nalewaj2024-02-24
| | | | | | | | mt7620a_tplink_archer-c5-v4.dts - added missing SPDX-License-Identifier mt7620.mk: added missing tabulator Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel: bump 6.1 to 6.1.79John Audia2024-02-24
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.79 Manually rebased: ath79/patches-6.1/900-unaligned_access_hacks.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: add support for TP-Link Archer C5 v4Mieczyslaw Nalewaj2024-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C5 v4 is a dual band router with 5 GbE ports Advertised as AC1200 for its 867Mbps (2x2) 5GHz band and 300 Mbps (2x2) 2.4GHz band. Specs: - SoC: MediaTek MT7620A - Ethernet: 5x GbE ports (Realtek RTL8367S) - Wireless 2.4GHz: MediaTek MT7620A - Wireless 5GHz: MediaTek MT7612E - RAM: 64MiB - ROM: 8MiB (GD25Q64CSIG) - 1 USB 2.0 port - 2 Buttons (WPS and reset) - 8 LEDs Flash instructions: Currently one has to install OpenWrt only via the serial console 1. Rename the factory.bin to to test.bin 2. start a TFTP server from IP address 192.168.0.225 and serve the image named test.bin 3. connect your device to the LAN port 4. power up the router and press 4 on the console to stop the boot process. 5. enter the following commands on the router console tftp 0x80060000 test.bin erase tplink 0x20000 0x7a0000 cp.b 0x80060000 0x20000 0x7a0000 reset Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [Update leds, add fast-read] Signed-off-by: Gaspare Bruno <gaspare@anlix.io> [Rebuilt version based on mt7620 tplink_archer.dtsi, support for external LNA, remove bad cell count info] Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: fix TP-Link Archer MAC address for ethernetMieczyslaw Nalewaj2024-02-24
| | | | | | | This fixes: [ 0.981884] OF: /ethernet@10100000: #nvmem-cell-cells = 1 found 0 Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: fix and clean up D-Link MAC addressAlan Luck2024-02-22
| | | | | | | | | | | | | | | | | add back WIFI eprom addresses pointer in mt7621_dlink_dir-xx60-a1.dtsi Change MAC address pointer from factory_e006 to factory_e000 + 3 same as used in D-link firmware 1.11 DIR-1960-A1 DIR-1960-A1,DIR-2640-A1,DIR-2660-A1,DIR-3060-A1 Clean-up MAC addresses in D-Link NOR devices DTS's Change WIFI MAC Addressees to the same as NAND cousins macaddr_factory_e000 + ? as later devices don't have the MAC address in factory configuration same as used in D-Link firmware 1.30 DIR-878-A1 DIR-867-A1,DIR-878-A1,DIR-878-R1,DIR-882-A1,DIR-882-R1,DIR-1935-A1 * D-link software differs between source of wan address Signed-off-by: Alan Luck <luckyhome2008@gmail.com>
* ramips: clean up useless dts partition labelsShiji Yang2024-02-21
| | | | | | | | | | The previous NVMEM eeprom conversions[1][2] left a lot of partition labels that were no longer used. They can be removed now. [1] https://github.com/openwrt/openwrt/pull/13584 [2] https://github.com/openwrt/openwrt/pull/13587 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: mt76x8: fix build due to renamed U-Boot binaryDaniel Golle2024-02-16
| | | | | | | | | The U-Boot binary for the RAVPower RP-WD009 has been renamed. In order to be uniform with all other U-Boot binaries generated the SoC type has been prepended. Set that new name also in the image build recipe for that device in order to fix build. Fixes: 927334a8f7 ("uboot-mediatek: add basic build for ZBT-WG3526 (MT7621, 16M SPI-NOR)") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: switch to pending XFI 10G Ethernet driversDaniel Golle2024-02-15
| | | | | | | | | Replace previous patch adding paths and SerDes modes with patch series pending upstream adding dedicated drivers for XFI T-PHY and USXGMII PCS, extends LynxI PCS to be a standalone platform driver and as a consequence makes much less changes to the actual Ethernet driver mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport phylink changes from mainline LinuxDaniel Golle2024-02-15
| | | | | | | Let's pick a bunch of useful phylink changes which allow us to keep drivers in sync with mainline Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: mt76x8: drop AT803X phy driverShiji Yang2024-02-12
| | | | | | | | | This Qualcomm Gigabit phy driver was mistakenly added because MT76x8 does not support external phy, and it only supports max 100M full duplex speed. Fixes: cadf5171074f ("ralink: add support for mt7628") Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Powered by cgit, Themed by Ted Yin.