| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The following upstreamed / superseded patches were dropped:
060-01-clk-mediatek-mt7629-fix-parent-clock-of-some-top-clo.patch
060-02-arm-dts-mt7629-fix-sgmii-clock-selection-for-etherne.patch
060-03-net-mediatek-use-correct-register-field-for-SGMII-sp.patch
060-04-net-mediatek-correct-register-name-of-ethsys-syscfg1.patch
060-05-net-mediatek-fix-sgmii-selection-for-mt7622.patch
060-06-net-mediatek-fix-gmac2-usability-for-mt7629.patch
060-07-net-mediatek-add-support-for-10GBASE-R.patch
060-08-net-mediatek-make-sgmii-usxgmii-optional.patch
060-09-net-mediatek-don-t-enable-GDMA-cpu-bridge-unconditio.patch
060-10-net-mediatek-fix-usability-with-wget-command.patch
061-01-net-mediatek-split-ethernet-switch-code-from-mtk_eth.patch
061-02-net-mediatek-add-support-for-MediaTek-MT7987-SoC.patch
061-03-net-mediatek-add-support-for-Airoha-AN8855-ethernet-.patch
070-01-board-mediatek-mt7622-remove-board_late_init.patch
070-02-clk-mediatek-fix-uninitialized-fields-issue-in-INFRA.patch
070-03-configs-mt7629-move-image-load-address-to-0x42000000.patch
070-04-configs-mt7988-move-image-load-address-to-0x44000000.patch
070-05-spi-mtk_spim-add-support-to-use-DT-live-tree.patch
070-06-spi-mtk_spim-check-slave-device-mode-in-spi-mem-s-su.patch
070-07-arm-dts-mediatek-add-quad-mode-capabilities-for-SPI-.patch
070-08-pwm-mediatek-add-pwm3-support-for-mt7981.patch
070-09-pci-mediatek-add-support-for-multiple-ports-in-media.patch
070-10-arm-dts-mediatek-add-pcie-support-for-mt7988.patch
070-11-arm-dts-medaitek-fix-internal-switch-link-speed-of-m.patch
070-12-arm-dts-mediatek-add-support-for-all-three-GMACs-for.patch
070-13-arm-dts-medaitek-add-flash-interface-driving-setting.patch
070-14-arm-dts-mediatek-update-mt7981-mmc-node.patch
070-15-MAINTAINERS-update-file-list-for-MediaTek-ARM-platfo.patch
071-01-pinctrl-mediatek-update-mt7981-pinctrl-driver-based-.patch
100-18-board-mt7629-add-support-for-booting-from-SPI-NAND.patch
290-mt7981-add-USB-nodes.patch
Refreshed all the patches needing it.
Run-tested: GatoNetworks GDSP, Arcadyan Mozart (ynezz),
Zbt WG3526 (dangowrt)
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [patch refresh, Mozart testing]
Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased, tested on MT7621]
|
|
|
This board is also as known as SuperElectron ZN-M5 and ZN-M8. However,
for ZN-M5 and ZN-M8, there's another version uses ZX279128 as CPU
chip, which is unsupported.
You can check it in "高级设置" > "系统日志" > "内核日志" page from webUI.
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, WPS
Power: DC 12V 1A
Stock layout flash instructions:
Login into webUI and upload sysupgrade firmware in "系统管理" > "升级固件" page.
Remember to unselect "保留配置" ("Keep configurations") first before doing that.
OpenWrt U-Boot layout flash instructions:
1. Flash stock layout firmware first.
2. Connect to the device via SSH, and backup everything,
especially 'Factory' partition.
3. Unlock MTD partitions:
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
4. Write new BL2 and FIP:
mtd write openwrt-mediatek-filogic-cmcc_a10-ubootmod-preloader.bin BL2
mtd write openwrt-mediatek-filogic-cmcc_a10-ubootmod-bl31-uboot.fip FIP
5. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
6. Serve OpenWrt initramfs image using TFTP server.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/18121
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|