aboutsummaryrefslogtreecommitdiff
path: root/package/boot/uboot-mediatek/patches
Commit message (Collapse)AuthorAge
* uboot-mediatek: bpi-r2: fix root= default cmdline parameterDaniel Golle2024-05-08
| | | | | | | | | With the switch from the uImage.FIT partition parser to fitblk the cmdline needs to be adjusted as well. Do this now as it has been forgotten when the switch was done. Fixes: 6368ed1ae5 ("mediatek: mt7623: phase out uImage.FIT partition parser") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r4: add support for 2.5GE PoE variantMartin Schiller2024-05-06
| | | | | | | This adds support for the bpi-r4 variant with internal 2.5G PHY and additional ethernet port instead of second sfp. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* mediatek: switch to fitblk for JDCloud RE-CP-03Tianling Shen2024-04-30
| | | | | | | Use the new fitblk driver. Tested-By: Yangyu Chen <cyy@cyyself.name> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-mediatek: add Netcore N60 supportChukun Pan2024-03-29
| | | | | | | The vendor uboot requires special fit verification. So add a custom uboot build for this device. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-mediatek: add support for GD5F1GQ5UEChuanhong Guo2024-03-21
| | | | | | | This patch adds support for GigaDevice GD5F1GQ5UExxG to the mtk-snfi driver in u-boot. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* uboot-mediatek: add Redmi AX6S as UBI loaderChuanhong Guo2024-03-21
| | | | | | | | | Add support for Xiaomi Redmi AX6S to be used as a second-stage UBI loader. The defconfig/env is minimal: Boot fit from UBI. If that failed, load and boot initramfs image from TFTP. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* uboot-mediatek: fix typo patch filenameDaniel Golle2024-03-11
| | | | | | 311-mt7986-select-roodisk.patch -> 311-mt7986-select-rootdisk.patch Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix patch orderDaniel Golle2024-03-11
| | | | | | | Make sure patch sequence number is unique by moving patch 440-add-jdcloud_re-cp-03.patch -> 441-add-jdcloud_re-cp-03.patch Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add 'rootwait' to bootargs where neededDaniel Golle2024-03-09
| | | | | | | | Probing of the fitblk driver in some situations happens after Linux attempts to mount rootfs, which then fails. Always use 'rootwait' kernel parameter when using fitblk for rootfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: remove rootfs_data before attempting to replace fipDaniel Golle2024-03-01
| | | | | | | Make sure there is enough space to replace 'fip' volume and always remove rootfs_data before. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: phase out uImage.FIT partition parserDaniel Golle2024-02-24
| | | | | | | | Use the new fitblk driver on the BananaPi R2 as well as UniElec U7623. Introduce boot device selection for fitblk's /chosen/rootdisk handle, similar to how it is already done on MT7622, MT7986 and MT7988. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix truncated patchDaniel Golle2024-02-24
| | | | | | | | | | The default environment for the Linksys E8450 and Belkin RT3200 got truncated by one line due to a broken patch. While the impact was luckily only cosmetic, fix it so bootmenu title also shows U-Boot version again. Fixes: 6aec3c7b5b ("mediatek: mt7622: modernize Linksys E8450 / Belkin RT3200 UBI build") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r3-mini: fix typo in bootmenuDaniel Golle2024-02-16
| | | | | | | Fix typo in eMMC bootmenu. Fixes: bc25519f98 ("uboot-mediatek: add builds for BananaPi BPi-R3 mini") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: bpi-r3-mini: fix NAND flash layoutDaniel Golle2024-02-16
| | | | | | | | Fix NAND flash layout which was out-of-sync with the definition in ARM TrustedFirmware-A which expects UBI to start at 0x200000. Fixes: b03d3644cf ("mediatek: filogic: add BananaPi BPi-R3 mini") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add builds for BananaPi BPi-R3 miniDaniel Golle2024-02-15
| | | | | | | | The R3 mini comes with two Airoha EN8811H PHYs for 2.5G Ethernet. The driver added to U-Boot expects the firmware for the PHY to be stored inside UBI volume en8811h-fw or MMC boot1 hardware partition. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: modernize Linksys E8450 / Belkin RT3200 UBI buildDaniel Golle2024-02-15
| | | | | | | | | | | | | | | | | Move fip and factory into UBI static volumes. Use fitblk instead of partition parser. !! RUN INSTALLER FIRST !! Existing users of previous OpenWrt releases or snapshot builds will have to **re-run the updated installer** before upgrading to firmware after this commit. DO NOT flash or run even just the initramfs image unless you have run the updated installer which moves the content of the 'factory' partition into a UBI volume. tl;dr: DON'T USE YET! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: convert BPi-R64 to all-UBI layout and fitblkDaniel Golle2024-02-15
| | | | | | | Modernize bootloader and flash memory layout of the BPi-R64 similar to how it has also been done for the BPi-R3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r3: all-UBI NAND layout, use fitblkDaniel Golle2024-02-15
| | | | | | | | | | Modernize U-Boot to provide a better reference: * store fip image in UBI now that TF-A supports that * switch from uImage.FIT partition parser to new fitblk virtual firmware block driver (root=/dev/fit0) * automatically set root device according to boot_mode register Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to U-Boot 2024.01 releaseDaniel Golle2024-02-15
| | | | | | | | Rebase local patches on top of quarterly timed release, allowing to drop numerous patches which have been accepted upstream since the release of U-Boot 2023.07.02. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add build for BPi-R4Daniel Golle2024-02-15
| | | | | | | Add build for the BananaPi R4 board which can boot from micro SD, SPI-NAND or eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: mt7988: set rootdisk according to boot deviceDaniel Golle2024-02-15
| | | | | | | If nodes /chosen/rootdisk-${bootdevice} exists, set /chosen/rootdisk phandle according to boot device selected by the bootstrap pins. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix MMC erase timeoutDaniel Golle2024-02-15
| | | | | | | | When erasing large amounts of blocks at once this can take a long time on slow cards. Instead of a fixed timeout, wait longer if more blocks are being erased. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add basic build for ZBT-WG3526 (MT7621, 16M SPI-NOR)Daniel Golle2024-02-15
| | | | | | | | | Add basic U-Boot drop-in replacement compatible with the flash layout of the vendor loader of the Zbtlink WG3526 (16M) MT7621 router board. The idea here is a to have a reference build of uboot-mediatek also for a simple MIPS boards more popular than MT7621 RFB. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add support for JDCloud RE-CP-03Tianling Shen2024-01-19
| | | | | | | The vendor U-Boot has enabled signature verification, so add a custom U-Boot build for OpenWrt. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* mediatek: filogic: add support for Xiaomi AX3000TDim Fish2024-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **SoC**: MediaTek MT7981B 2x A53 **Flash**: ESMT F50L1G41LB 128MB **RAM**: NT52B128M16JR-FL 256MB **Ethernet**: 4x 10/100/1000 Mbps **Switch**: MediaTek MT7531AE **WiFi**: MediaTek MT7976C **Buttons**: Reset, Mesh **Power**: DC 12V 1A 1. Get ssh access. Supported stock firmware **1.0.47** ``` curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20set%20ssh_en%3D1%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20commit%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Ased%20-i%20's%2Fchannel%3D.*%2Fchannel%3D%22debug%22%2Fg'%20%2Fetc%2Finit.d%2Fdropbear%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=********/api/misystem/arn_switch" -d "open=1&model=1&level=%0Apasswd%20-d%20root%0A ``` 2. Backup stock partitions ``` nanddump -f /tmp/BL2.bin /dev/mtd1 nanddump -f /tmp/Nvram.bin /dev/mtd2 nanddump -f /tmp/Bdata.bin /dev/mtd3 nanddump -f /tmp/Factory.bin /dev/mtd4 nanddump -f /tmp/FIP.bin /dev/mtd5 nanddump -f /tmp/ubi.bin /dev/mtd8 nanddump -f /tmp/KF.bin /dev/mtd12 ``` Then transfer them to your computer in a safe place. 3. Get firmware information `cat /proc/cmdline` 4. Copy openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi to **/tmp** and flash If **firmware=0** ``` ubiformat /dev/mtd9 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` If **firmware=1** ``` ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` Then reboot your router, it should boot to the OpenWrt initramfs system now. 5. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin` 1. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` `reboot` 2. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 3. Format ubi and create new ubootenv volume ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB ``` 4. *(Optional **-10Mb** free space) Add recovery boot feature.* ``` ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb ``` 5. Flash Openwrt U-Boot ``` mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin BL2 mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip FIP ``` 6. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb` 1. Force flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `sysupgrade -F -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` 2. Format ubi and Nvram ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 mtd erase Nvram ``` 3. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Flash stock images from backup ``` mtd write /tmp/BL2.bin BL2 mtd write /tmp/FIP.bin FIP mtd write /tmp/ubi.bin ubi ``` Then reboot your router, waiting it finished rollback in minutes. `ubiformat /dev/mtd7 -y -f /tmp/ubi.bin` Then reboot your router, waiting it finished rollback in minutes. Signed-off-by: Dim Fish <dimfish@gmail.com>
* uboot-mediatek: use intree dtc explicitlyTianling Shen2023-11-26
| | | | | | This replaces pylibfdt hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-mediatek: add initial Zyxel EX5601-T0 supportValerio 'ftp21' Mancini2023-11-25
| | | | | | | | | | | | | | | | | | | | | | | Flash procedure is described in next commit. TLDR: Copy preloader and uboot to /tmp and write them in the mtd. This will also require new UBI partition and volumes to boot openwrt. mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2 mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip Changelist: - Added profile for 4k+256 SPI NAND_TYPE - Added basic Zyxel EX5601-T0 uboot profile Backported from hitech95 branch: - Button RESET pin fix - Button WPS pin fix Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu> Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
* uboot-mediatek: Fix ubi command in uboot commandsCarter Wang2023-11-19
| | | | | | | Fix typo 'ubi remote ...' -> 'ubi remove ...'. Signed-off-by: Carter Wang <carter.wang@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add JCG Q30 PRO supportChukun Pan2023-11-19
| | | | | | | The vendor uboot will verify firmware at boot. So add a custom uboot build for this device. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* Revert "uboot-mediatek: fix build on Mac OS X"Petr Štetiar2023-11-02
| | | | | | | | | This reverts commit 997ff740dc44045390680eaa30b6566d40bca322. 78cbd5apick as it should be fixed in commit 78cbd5a57e11 ("tools: macOS: types.h: fix missing unsigned types"). References: #13833 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-mediatek: fix determine the size of an uImage.FIT using 'imsz' or 'imszb'.Jianhui Zhao2023-10-31
| | | | | | | It must read the entire image for previous code of 'imsz' or 'imszb'. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com> Suggested-by: Chuanhong Guo <gch981213@gmail.com>
* uboot-mediatek: Sync phy-mode for Xiaomi Redmi Router AX6000Furong Xu2023-10-28
| | | | | | | | | | | Commit 572ea6807053 ("uboot-mediatek: add patches for MT7988 and builds for RFB") renamed HSGMII to 2500basex, but forgot to update the dts of Redmi Router AX6000, makes the network unusable. This patch makes the network usable again. Fixes: #13724 Fixes: 572ea6807053 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Furong Xu <xfr@outlook.com>
* uboot-mediatek: add support for CMCC RAX3000MTianling Shen2023-10-28
| | | | | | | The OEM U-Boot uses dual boot and signature verification which does not support by OpenWrt. So add a custom U-Boot build for OpenWrt. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-mediatek: fix global pll clock override on mtk_spimNicolò Veronese2023-10-22
| | | | | | | | | | | | With patch 101-03-spi-mtk_spim-get-spi-clk-rate-only-once.patch a new system to calculate the SPI clocks has been added. Unfortunately, the do_div macro overrides the global priv->pll_clk_rate field. This will cause to have a reduced clock rate on each subsequent SPI call. Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu> Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
* uboot-mediatek: fix typo in bootmenu for GL-MT6000Jianhui Zhao2023-10-20
| | | | | | Fixes: fe10f97 ("filogic: add support for GL.iNet GL-MT6000") Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* filogic: add support for GL.iNet GL-MT6000Jianhui Zhao2023-09-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: * SoC: MediaTek MT7986A 4x A53 * Flash: 8GB EMMC * RAM: 1GB DDR4 * Ethernet: * 2x2.5G RJ45 port (RTL8221B) * 4x1G RJ45 ports (MT7531AE) * WLAN: * 2.4GHz: MT7976GN 4T4R * 5GHz: MT7976AN 4T4R * Button: Reset * LED: 1 x dual color LED * USB: 1 x USB 3.0 * Power: DC 12V 4A * UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC) * JTAG: 9 PIN If you want to use u-boot from OpenWrt, you can upgrade it safely. * bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin * fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip `openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* uboot-mediatek: sync spi-nand driver with SDKChukun Pan2023-09-29
| | | | | | | | | | | When adding new router support, I found that uboot could not recognize flash: "unknown raw ID xxx". Sync SPI-NAND driver for mediatek to fixes this: * Add support for Winbond W25N01KV 1Gbit chip. * Add support for Etron SPI-NAND chip. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-mediatek: add build for mt7981 rfbDaniel Golle2023-09-21
| | | | | | | Improve and package builds for various boot media configurations of the MediaTek MT7981 reference board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: sync mtk-snand driver with SDKDaniel Golle2023-09-10
| | | | | | | | Sync SPI-NAND/ECC controller driver for MT7622, MT7981, MT7986 and MT7988: * Platform data for MT7981 was actually missing and is now added. * Add support for Winbond W25N01KV 1Gbit chip. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add builds for UniFi 6 LR v2 and v3Daniel Golle2023-08-28
| | | | | | | While the v2 is nearly identical to v1, v3 uses a different PHY and needs a different build for Ethernet to work in U-Boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: build fully-featured U-Boot for MT7988 RFBDaniel Golle2023-08-28
| | | | | | | | | | | | | | | | | | Select many potentially useful options for the MT7988 RFB U-Boot builds. The resulting loader is intended as a development tool and intends to be generic. It does *not* have a default bootcmd set, but allows to boot pretty much everything, including EFI executables. To install this U-Boot build to the eMMC: opkg install mmc-utils partx-utils mmc bootpart enable 1 1 /dev/mmcblk0 echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=*mediatek_mt7988a-rfb-nand-emmc-preloader.bin of=/dev/mmcblk0boot0 dd if=*mediatek_mt7988a-rfb-nand-emmc-gpt.bin of=/dev/mmcblk0 partx -a /dev/mmcblk0 dd if=*mediatek_mt7988a-rfb-nand-emmc-bl31-uboot.fip of=/dev/mmcblk0p3 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: increase max. memory regions on mt7988-rfbDaniel Golle2023-08-24
| | | | | | | | | | | WED requires a bunch of additional reserved memory regions. As U-Boot's LMB allocator defaults to a maximum of only 8 regions, this currently makes using WED impossible. Raise LMB_MAX_REGIONS to 64 just like for all other MediaTek boards with a SoC supporting WED. Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r3: prepare for larger FIT structuresDaniel Golle2023-08-13
| | | | | | | | | Instead of reading only a single 4kiB page, read the first 128kiB to determine the size of an uImage.FIT using 'imsz' or 'imszb'. This will be needed once we add more Device Tree Overlays, which may happen for the BPi-R3 mini. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix build for MT7629Daniel Golle2023-07-31
| | | | | | | | Add patch to fix build failure caused by a missing header which had previously been implicitely included. Fixes: 6ddb5f5a65 ("uboot-mediatek: update to version 2023.07.02") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add missing 'memory' nodes to downstream boardsDaniel Golle2023-07-31
| | | | | | | | | | Among the patches adding support for MT7988 also came the switch to use fdtdec_setup_mem_size_base() and no longer rely on CFG_SYS_SDRAM_BASE. Take care of our downstream boards which did not have a 'memory' node in their device trees. Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add patches for MT7988 and builds for RFBDaniel Golle2023-07-29
| | | | | | | Import pending patches adding support for MT7988 and provide builds for the reference board for all possible boot media. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to version 2023.07.02Daniel Golle2023-07-29
| | | | | | | | | | Release 2023.07 got tagged wrongly and replaced by follow-up release 2023.07.02. Now using upstream DTS for BPi-R3. Removed two patches which made it upstream, refreshed the rest. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add support for Xiaomi WR30UHank Moretti2023-07-27
| | | | | | Add a custom uboot build to support openwrt uboot layout. Signed-off-by: Hank Moretti <mchank9999@gmail.com>
* uboot-mediatek: support classic uImage.FIT with internal images in imszbDaniel Golle2023-07-08
| | | | | | | | The side-effect and main motivation is to also drop the FIT structure size limit because with multiple device tree overlays it may easily grow beyond the previous 4kB limit in the future. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add H3C Magic NX30 Pro supportChukun Pan2023-07-01
| | | | | | | The OEM uboot limit brush into 3rd-party firmware. So add a custom uboot build to support openwrt. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Powered by cgit, Themed by Ted Yin.