aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* toolchain/gdb: update to 13.2Hannu Nyman2023-11-10
| | | | | | Update the toolchain gdb to version 13.2. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: provide better control & help for SLUB configurationRafał Miłecki2023-11-09
| | | | | | | Allow selecting KERNEL_SLUB_DEBUG and KERNEL_SLUB_DEBUG_ON manually and provide detailed help for both. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: disable CONFIG_SLUB_DEBUG in target configsRafał Miłecki2023-11-09
| | | | | | | | | | | From the symbol help message: > SLUB has extensive debug support features. Disabling these can result > in significant savings in code size. There seems to be no need to enable those debugging features for standard use. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq807x: add support for Yuncore AX880Isaev Ruslan2023-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPECIFICATION: - Chipset: IPQ8072A +QCN5054+QCN5024+QCA8081*2 - Flash NOR-8MB AND NAND-128MB - RAM 1Gb DDR - IEEE 802.11: 802.11ax/ac/b/g/n - 4*4 2.4G Wi-Fi standard 802.11b/g/n/ax - 4*4 5.8G Wi-Fi Standard 802.11 a/n/ac/ax - 2x 1 Gbps Ethernet (QCA8081) with 802.3at PoE input support - 1x Reset - 1x Bluetooth(optional) - 1x DC Port 12V 3A - 4x Antenna IPEX Connector, 3dBi omni antennas - Data Rate: 3657Mbps ( 2.4G: 1182Mbps (11ax 4x4); 5.8G: 2475Mbps (11ax 4x4)) - RF Power: 2.4g ≤ 20dBm; 5.8g ≤ 19dBm - LED light: Sys; 5.8G wifi; 2.4G wifi; WAN; LAN - Max Power Consumption: ≤ 22W - Size: 198mm * 198mm * 41.02mm BACKUP YOUR STOCK FIRMWARE: ``` export device=ax880 mkdir -p /tmp/fw_dump_$device cd /tmp/fw_dump_$device dmesg > dmesg_$device.log dtc -I fs /sys/firmware/devicetree/base > $device.dts cat /proc/device-tree/model > model cat /proc/mtd > proc_mtd while read p; do mtd_dev=$(echo $p | cut -d: -f1) echo $mtd_dev dd if=/dev/$mtd_dev of=$mtd_dev done < proc_mtd md5sum * > md5sum.log tar -cvzf ../$device.tar.gz . export sum=$(md5sum /tmp/$device.tar.gz | cut -d' ' -f1) mv ../$device.tar.gz /tmp/${device}_${sum}.tar.gz echo fw backup saved to: /tmp/${device}_${sum}.tar.gz ``` Upload your backup via tftp to the safe place. INSTALLATION: 1. stock firmware web ui Rename factory.bin fw image file to factory.ubin. Flash this image like ordinary stock fw upgrade. 2. stock firmware telnet method Enter telnet cli (login: root, password: 476t*_f0%g09y) and upload factory.bin fw image and rename it to factory.ubin `cd /tmp && wget <your_web_server_ip>/factory.ubin` `sysupgrade factory.ubin 3. initramfs method Put openwrt-ipq807x-generic-yuncore_ax880-initramfs-uImage.itb to your TFTP server and rename it to ax880.initram Enable serial console and enter to the u-boot cli. Exec these commands: `tftpboot <your_tftp_server_ip>:ax880.initram` `dhcp` When downloading is finished: `bootm` After booting the device, you need to upload to the device factory.ubi fw image. ``` cd /tmp && wget <your_web_server_ip>/factory.ubi` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f factory.ubi ubiformat /dev/${rootfs_1} -y -f factory.ubi reboot ``` 4. u-boot factory.ubi image method Put openwrt-ipq807x-generic-yuncore_ax880-squashfs-factory.ubi to your TFTP server and rename it to ax880.ubi Enter u-boot cli and exec these commands: `tftpboot <your_tftp_server_ip>:ax880.ubi` `dhcp` After downloading is finished: `flash rootfs` `flash rootfs_1` `reset` 5. u-boot factory.bin method Put openwrt-ipq807x-generic-yuncore_ax880-squashfs-factory.bin to your TFTP server and rename it to ax880.bin Enter u-boot cli and exec these commands: `tftpboot <your_tftp_server_ip>:ax880.bin` `dhcp` After downloading is finished: `imgaddr=$fileaddr && nand device 0` Erase rootfs memory: `nand erase 0x00000000 0x03400000` Write rootfs: `nand write $fileaddr 0x00000000 $filesize` Erase rootfs_1 memory: `nand erase 0x3c00000 0x3400000` Write rootfs_1 `nand write $fileaddr 0x3c00000 $filesize` `reset` STOCK FIRMWARE RECOVERY: Boot initramfs image. Upload your rootfs mtd partition to the device using scp or download it from the device using wget. Enter device ssh cli and exec: ``` cd /tmp && wget <your_web_server_ip>/mtd21` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f /tmp/mtd21 ubiformat /dev/${rootfs_1} -y -f /tmp/mtd21 reboot ``` Signed-off-by: Isaev Ruslan <legale.legale@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* hostapd: refresh patchesChristian Marangi2023-11-09
| | | | | | Refresh patches for hostapd using make package/hostapd/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscanChristian Marangi2023-11-09
| | | | | | | | | | | | | Currently for 802.1s only, for wifi 2.4GHz in g/n mode, 40MHz is never permitted. This is probably due to the complexity of setting periodic check for the intolerant bit. When noscan option is set, we ignore the presence of the intoleran bit in near AP, so we can enable 40MHz and ignore any complex logic for checking. Fixes: #13112 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: permit also channel 7 for 2.5GHz to be set to HT40PLUSChristian Marangi2023-11-09
| | | | | | | Also channel 7 for 2.4GHz can be set to HT40PLUS. Permit this and add it to the list of the channels. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: fix broke noscan option for meshChristian Marangi2023-11-09
| | | | | | | | | noscan option for mesh was broken and actually never applied. This is caused by a typo where ssid->noscan value is check instead of conf->noscan resulting in the logic swapped and broken. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mac80211: fix not set noscan option for wpa_supplicantChristian Marangi2023-11-09
| | | | | | | | noscan option was changed to hostapd_noscan but the entry in wpa_supplicant was never updated resulting in the noscan option actually never set. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: qca-ssdk: update to 12.4Robert Marko2023-11-09
| | | | | | | Update SSDK version to 12.4, this fixes weird SFP port link up/downs while there is no SFP module plugged in. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: backport missing SMEM ID-s for SSDKRobert Marko2023-11-09
| | | | | | | | SSDK has switched to using the upstream SMEM helper to get the SoC ID and then look it up in the QCA SMEM ID header, so we need these in order for SSDK to compile as they are currently undefined. Signed-off-by: Robert Marko <robimarko@gmail.com>
* tools/mkimage: update to 2023.10Nick Hainke2023-11-09
| | | | | | | | | | | | | | Update to latest version. Remove "100-increase-tmpfile-name-length-limit.patch" because project is now using limits.h with PATH_MAX [0]. Automatically refreshed: - 030-allow-to-use-different-magic.patch [0] - https://github.com/u-boot/u-boot/commit/99d430f344bfdb0641022fd3efa26c29c957df02 Signed-off-by: Nick Hainke <vincent@systemli.org>
* ucode: update to Git HEAD (2023-11-07)Jo-Philipp Wich2023-11-09
| | | | | | | 0352a33 uloop: support new interval and signal APIs 1468cc4 syntax: don't treat `as` and `from` as reserved keywords Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: bump to git HEADDaniel Golle2023-11-09
| | | | | | | | | 3a07943 block: support skipping uuid check 56a9b4e block: consider currently mounted root device first 9cd09d4 block: try to find the root device on both / and /rom c1a8d95 block: support extroot on already mounted overlay Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to release 2023-10-13Daniel Golle2023-11-09
| | | | | | Drop local patches now upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* gemini: usb-fotg210: remove uneeded dependency on @USB_SUPPORTRobert Marko2023-11-08
| | | | | | | $(call AddDepends/usb) will add the dependency on @USB_SUPPORT so there is no need to duplicate it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* gemini: usb-fotg210: add missing module name to AutoLoadRobert Marko2023-11-08
| | | | | | AutoLoad expects the module name to be present after the load index. Signed-off-by: Robert Marko <robimarko@gmail.com>
* gemini: dont select USB driver as module via configRobert Marko2023-11-08
| | | | | | | | | | | The FOTG210 USB driver is currently being selected as a module directly via the target kernel config which should not be done and via kmod as well. So, lets drop the driver selection in the target kernel module as kmod is sufficient. Fixes: 585360f0c0ec ("gemini: refresh kernel config") Signed-off-by: Robert Marko <robimarko@gmail.com>
* gemini: usb-fotg210: enable OTG supportRobert Marko2023-11-08
| | | | | | | | The usb-fotg210 does not currently select CONFIG_USB_FOTG210_UDC which enable OTG support, but it was previously selected directly in the target kernel config so lets enable it to keep the functionality identical. Signed-off-by: Robert Marko <robimarko@gmail.com>
* gemini: usb-fotg210: fix FOTG210_HCD settingRobert Marko2023-11-08
| | | | | | | | | | CONFIG_USB_FOTG210_HCD is a boolean symbol, so it must be set to "y" instead of the default which is to set it as "m". Otherwise you will get prompted to set the symbol during kernel building. Fixes: 585360f0c0ec ("gemini: refresh kernel config") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ramips: Cudy WR1300v2 fix mt7613 calibration data lengthFilip Milivojevic2023-11-08
| | | | | | | Since MT7613 is handled by MT7615 driver, and other devices using MT7615 have reg = <0x8000 0x4da8>; this needs updating or eeprom data fails to load. Signed-off-by: Filip Milivojevic <zekica@gmail.com>
* hostapd: use rtnl to set up interfacesFelix Fietkau2023-11-08
| | | | | | In wpa_supplicant, set up wlan interfaces before adding them Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wifi: fix applying mesh parameters when wpa_supplicant is in useFelix Fietkau2023-11-08
| | | | | | | Apply them directly using nl80211 after setting up the interface. Use the same method in wdev.uc as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qualcommax: refresh patchesRobert Marko2023-11-08
| | | | | | | It seems that patches were not refreshed during last kernel bump, so lets refresh them. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: fixup patch numberingRobert Marko2023-11-08
| | | | | | | It seems that I forgot one zero in the patch numbering while marking these as backports, so lets fix it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* px5g-wolfssl: Fix permission of private keyHauke Mehrtens2023-11-07
| | | | | | | | | | | | | | | | | Store the private key with read and write permission for the user only and not with read permissions for everyone. This converts the write_file() function from fopen() to open() because open allows to specify the permission mask of the newly created file. It also adds and fixes some existing error handling. OpenSSL does this in the same way already. With this change it looks like this: root@OpenWrt:/# ls -al /etc/uhttpd.* -rw-r--r-- 1 root root 749 Nov 6 23:14 /etc/uhttpd.crt -rw------- 1 root root 121 Nov 6 23:14 /etc/uhttpd.key Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* px5g-mbedtls: Fix permission of private keyHauke Mehrtens2023-11-07
| | | | | | | | | | | | | | | | | Store the private key with read and write permission for the user only and not with read permissions for everyone. This converts the write_file() function from fopen() to open() because open allows to specify the permission mask of the newly created file. It also adds and fixes some existing error handling. OpenSSL does this in the same way already. With this change it looks like this: root@OpenWrt:/# ls -al /etc/uhttpd.crt /etc/uhttpd.key -rw-r--r-- 1 root root 519 Nov 6 22:58 /etc/uhttpd.crt -rw------- 1 root root 121 Nov 6 22:58 /etc/uhttpd.key Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rockchip: refresh kernel configRafał Miłecki2023-11-07
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* gemini: refresh kernel configRafał Miłecki2023-11-07
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* sifiveu: refresh kernel configRafał Miłecki2023-11-07
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* qoriq: refresh kernel configRafał Miłecki2023-11-07
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: update to the latest versionFelix Fietkau2023-11-07
| | | | | | | | | | | 383753dd65ae device/bridge: support passing extra vlans in the device_set_state call b6e75eafc1af device: send notifications for device events via ubus cab415c7aefd bridge: add auth-required bridge members with auth_status=0 if vlan is enabled 827a02f0343c bridge: add support for configuring vlans for auth=1,auth_status=false 40ed7363caf2 device: fix build error on 32 bit systems 516ab774cc16 system-linux: fix race condition on bringing up wireless devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bpf-headers: Fix download URL with kernel 6.1Hauke Mehrtens2023-11-06
| | | | | | | | | | | | | | | | | | | This fixes the download of the kernel 5.15 for the bpf-headers when kernel 6.1 is build for the target. Even if kernel 6.1 was selected for the target we still use kernel 5.15 for the bpf-headers. The download script tried to download the 5.15 kernel from the 6.x directory on kernel,org and this failed. Define PKG_SOURCE_URL based on PKG_PATCHVER and not KERNEL_BASE like done in kernel.mk. Without this change it tries to download the kernel from this URL: ttps://cdn.kernel.org/pub/linux/kernel/v6.x/linux-5.15.129.tar.xz Fixes: #13190 Fixes: #13671 Fixes: #13814 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: Activate secp521r1 curve by defaultHauke Mehrtens2023-11-06
| | | | | | | | | | | | | | | | | Activate the secp521r1 ecliptic curve by default. This curve is allowed by the CA/Browser forum, see https://cabforum.org/wp-content/uploads/CA-Browser-Forum-BR-v2.0.1-redlined.pdf#page=110 This increases the size of libmbedtls12_2.28.5-1_aarch64_generic.ipk by about 400 bytes: Without: 252,696 libmbedtls12_2.28.5-1_aarch64_generic.ipk With: 253,088 libmbedtls12_2.28.5-2_aarch64_generic.ipk Fixes: #13774 Acked-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: refresh kernel config for 6.1Rafał Miłecki2023-11-06
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* image: fix image generation within ImageBuilderPetr Štetiar2023-11-06
| | | | | | | | | | | | | | Changes introduced in commit d604a07225c5 ("build: add CycloneDX SBOM JSON support") broke ImageBuilder: Cannot open '/openwrt-imagebuilder-ath79-generic.Linux-x86_64/tmp/.packageinfo': No such file or directory So lets fix it by wrapping the BOM generation behind condition of IB feature check. Fixes: #13881 Fixes: d604a07225c5 ("build: add CycloneDX SBOM JSON support") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: add label-mac for GL.iNet GL-MT3000David Bauer2023-11-03
| | | | | | The MAC-address of gmac0 matches the one printed on the bottom label. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: mt7981: improve fan behaviourŁukasz M2023-11-03
| | | | | | | | | | | This doubles the number of cooling-levels. In addition the fan is turned on with a low speed at lower temperatures and with a higher speed at higher temperatures. This also attempts to reduce the likelihood of constant start-stop actions. The change only affects the GL.iNet MT3000 and has been tested with it. Signed-off-by: Łukasz M <lukasz1992m@gmail.com>
* ath79: support Fortinet FAP-220-BLech Perczak2023-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fortinet FAP-220-B is a dual-radio, dual-band 802.11n enterprise managed access point with PoE input and single gigabit Ethernet interface. Hardware highlights: Power: 802.3af PoE input on Ethernet port, +12V input on 5.5/2.1mm DC jack. SoC: Atheros AR7161 (MIPS 24kc at 680MHz) RAM: 64MB DDR400 Flash: 16MB SPI-NOR Wi-Fi 1: Atheros AR9220 2T2R 802.11abgn (dual-band) Wi-Fi 2: Atheros AR9223 2T2R 802.11bgn (single-band) Ethernet: Atheros AR8021 single gigabit Phy (RGMII) Console: External RS232 port using Cisco 8P8C connector (9600-8-N-1) USB: Single USB 2.0 host port LEDs: Power (single colour, green), Wi-Fi 1, Wi-Fi 2, Ethernet, Mode, Status (dual-colour, green and yellow) Buttons: reset button hidden in bottom grill, in the top row, 2nd column from the right. Label MAC address: eth0 FCC ID: TVE-220102 Serial port pinout: 3 - TxD 4 - GND 6 - RxD Installation: The same methods apply as for already supported FAP-221-B. For both methods, a backup of flash partitions is recommended, as stock firmware is not freely available on the internet. (a) Using factory image: 1. Connect console cable to the console port 2. Connect Ethernet interface to your PC 3. Start preferred terminal at 9600-8-N-1 4. Have a TFTP server running on the PC. 5. Put the "factory" image in TFTP root 6. Power on the device 7. Break boot sequence by pressing "Ctrl+C" 8. Press "G". The console will ask you for device IP, server IP, and filename. Enter them appropriately. The defaults are: Server IP: 192.168.1.1 # Update accordingly Device IP: 192.168.1.2 # Update accordingly Image file: image.out # Use for example: openwrt-ath79-generic-fortinet_fap-220-b-squashfs-factory.bin 9. The device will load the firmware over TFTP, and verify it. When verification passes, press "D" to continue installation. The device will reboot on completion. (b) Using initramfs + sysupgrade 1. Connect console cable to the console port 2. Connect Ethernet interface to your PC 3. Start preferred terminal at 9600-8-N-1 4. Have a TFTP server running on the PC. 5. Put the "initramfs" image in TFTP root 6. Power on the device. 7. Break boot sequence by pressing "Ctrl+C" 8. Enter hidden U-boot shell by pressing "K". The password is literal "1". 9. Load the initramfs over TFTP: > setenv serverip 192.168.1.1 # Your PC IP > setenv ipaddr 192.168.1.22 # Device IP, both have to share a subnet. > tftpboot 81000000 openwrt-ath79-generic-fortinet_fap-220-b-initramfs-kernel.bin > bootm 81000000 10. (Optional) Copy over contents of at least "fwconcat0", "loader", and "fwconcat1" partitions, to allow restoring factory firmware in future: # cat /dev/mtd1 > /tmp/mtd1_fwconcat0.bin # cat /dev/mtd2 > /tmp/mtd2_loader.bin # cat /dev/mtd3 > /tmp/mtd3_fwconcat1.bin and then SCP them over to safety at your PC. 11. When the device boots, copy over the sysupgrade image, and execute normal upgrade: # sysupgrade openwrt-ath79-generic-fortinet_fap-220-b-squashfs-sysupgrade.bin Return to stock firmware: 1. Boot initramfs image as per initial installation up to point 9 2. Copy over the previously backed up contents over network 3. Write the backed up contents back: # mtd write /tmp/mtd1_fwconcat0.bin fwconcat0 # mtd write /tmp/mtd2_loader.bin loader # mtd write /tmp/mtd3_fwconcat1.bin fwconcat1 4. Erase the reserved partition: # mtd erase reserved 5. Reboot the device Quirks and known issues: - The power LED blinking pattern is disrupted during boot, probably due to very slow serial console, which prints a lot during boot compared to stock FW. - "mac-address-ascii" device tree binding cannot yet be used for address stored in U-boot partition, because it expects the colons as delimiters, which this address lacks. Addresses found in ART partition are used instead. - Due to using kmod-owl-loader, the device will lack wireless interfaces while in initramfs, unless you compile it in. - The device heats up A LOT on the bottom, even when idle. It even contains a warning sticker there. - Stock firmware uses a fully read-write filesystem for its rootfs. - Stock firmware loads a lot of USB-serial converter drivers for use with built-in host, probably meant for hosting modem devices. - U-boot build of the device is stripped of all branding, despite that evidence of it (obviously) being U-boot can be found in the binary. - The user can break into hidden U-boot shell using key "K" after breaking boot sequence. The password is "1" (without quotes). - Telnet is available by default, with login "admin", without password. The same is true for serial console, both drop straight to the Busybox shell. - The web interface drops to the login page again, after successfull login. - Whole image authentication boils down to comparing a device ID against one stored in U-boot. - And this device is apparently made by a security company. Big thanks for Michael Pratt for providing support for FAP-221-B, which shares the entirety of image configuration with this device, this saved me a ton of work. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: image: extract common part for Fortinet FAP seriesLech Perczak2023-11-03
| | | | | | | In preparation for FAP-220-B support, extract the common part of image recipe for FAP-221-B. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: dts: fortinet_loader: extract common partLech Perczak2023-11-03
| | | | | | | | | | | In preparation for FAP-220-B support, rename ar934x_fortinet_loader.dtsi to arxxxx_fortinet_loader.dtsi, to avoid confusion, as FAP-220-B shares flash layout with FAP-221-B exactly despite different SoC. While at that, add a label to U-boot partition to allow for nvmem MAC binding in future. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* build: replace `true` with a custom noop scriptIlya Katsnelson2023-11-03
| | | | | | | `true` might be a shell built-in, or simply not accessible in the hardcoded locations. Replace it with a custom script that does nothing. Signed-off-by: Ilya Katsnelson <me@0upti.me>
* treewide: fix MERCUSYS brand spellingMikhail Zhilkin2023-11-03
| | | | | | | | | This commit fixes MERCUSYS brand spelling. The proper name is capitalized. Link: https://www.mercusys.com/ Link: https://github.com/torvalds/linux/blob/master/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c#L7779 Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* filogic: fix wifi eeprom filename for tuf-ax6000Patryk Kowalczyk2023-11-03
| | | | | | | | The router use mt7986_eeprom_mt7976_dual.bin Fixes: d522ccecb2 ("filogic: add support for ASUS TUF AX6000") Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
* ramips: add support for MeiG SLT866 4G CPEDaniel Golle2023-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: - SoC: Mediatek MT7621 (MT7621AT) - Flash: 32 MiB SPI-NOR (Macronix MX25L25635E) - RAM: 128 MiB - Ethernet: Built-in, 2 x 1GbE - 3G/4G Modem: MEIG SLM828 (currently only supported with ModemManager) - SLIC: Si32185 (unsupported) - Power: 12V via barrel connector - Wifi 2.4GHz: Mediatek MT7603BE 802.11b/g/b - Wifi 5GHz: Mediatek MT7613BE 802.11ac/n/a - LEDs: 8x (7 controllable) - Buttons: 2x (RESET, WPS) Installing OpenWrt: - sysupgrade image is compatible with vendor firmware. Recovery: - Connect to any of the Ethernet ports, configure local IP: 10.10.10.3/24 (or 192.168.10.19/24, depending on OEM) - Provide firmware file named 'mt7621.img' on TFTP server. - Hold down both, RESET and WPS, then power on the board. - Watch network traffic using tcpdump or wireshark in realtime to observe progress of device requesting firmware. Once download has completed, release both buttons and wait until firmware comes up. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: add environment config for MeiG SLT866Daniel Golle2023-11-03
| | | | | | Add configuration to access U-Boot environment on MeiG SLT866. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: support reading hex MAC address from NVMEMDaniel Golle2023-11-03
| | | | | | | In addition to binary and ASCII-formatted MAC addresses, add support for processing hexadecimal encoded MAC addresses from NVMEM. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add support MeigLink SLM828 modemDaniel Golle2023-11-03
| | | | | | | | | | | | | | | | | Another Qualcomm-based USB-connected modem, offering endpoints 0 : rndis_host (link to voip subsystem listening on 169.254.5.100) 1 : rndis_host (?) 2 : option (?) 3 : option (at) 4 : option (at) 5 : option (?) 6 : GobiNet (qmi) 7 : ? Add support for this modem in rndis_host, option and qmi_wwan driver which allows the modem to be used with ModemManager. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall4: update to latest Git HEADJo-Philipp Wich2023-11-03
| | | | | | | | | | | | | | 4101dd4 fw4: perform strict validation of zone and set names a923c88 fw4: pass zone to templates whenever possible 597dc90 fw4: add support for zone log_limit 1874050 fw4: add log_limit to rules and redirects 19a8caf ruleset: dispatch ct states using verdict map a5553da ruleset: reduce ksoftirqd load by refering to looopback by numeric id de3483c tests: adjust zone log limit testcases 7392792 ruleset: do not emit redundant drop invalid rules 698a533 ruleset: apply egress MSS fixup later to apply final MTU before wire Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 6.1 to 6.1.61John Audia2023-11-03
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.61 Removed upstreamed: generic/backport-6.1/814-v6.6-0018-nvmem-imx-correct-nregs-for-i.MX6SLL.patch[1] generic/backport-6.1/814-v6.6-0019-nvmem-imx-correct-nregs-for-i.MX6UL.patch[2] generic/backport-6.1/814-v6.6-0020-nvmem-imx-correct-nregs-for-i.MX6ULL.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.61&id=b90b8633ef62314f3a5f5675106e6dcdec981b6f 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.61&id=37495846b1efc23c1767b17ddd6645cc0ccb9946 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.61&id=116671d25915b913374ccdb2956b5fdaff939dc9 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
Powered by cgit, Themed by Ted Yin.