kernel/rockchip: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.

See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.

Signed-off-by: Antonio Flores <antflores627@gmail.com>

1 files changed, 134 insertions, 0 deletions

diff --git a/target/linux/rockchip/patches-6.1/019-v6.3-arm64-dts-rockchip-Enable-WiFi-BT-support-for-Radxa-CM3.patch b/target/linux/rockchip/patches-6.1/019-v6.3-arm64-dts-rockchip-Enable-WiFi-BT-support-for-Radxa-CM3.patch
new file mode 100644
index 0000000000..9855b9e1a6
--- /dev/null
+++ b/target/linux/rockchip/patches-6.1/019-v6.3-arm64-dts-rockchip-Enable-WiFi-BT-support-for-Radxa-CM3.patch
@@ -0,0 +1,134 @@
+From af5a803bf212e077e5fb7a1d4cf6be02f74a74ca Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Wed, 25 Jan 2023 21:40:23 +0530
+Subject: [PATCH] arm64: dts: rockchip: rk3566: Enable WiFi, BT support for
+ Radxa CM3
+
+Radxa Compute Module 3 has an onboard AW_CM256SM WiFi/BT module.
+
+Add nodes for enabling it.
+
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230125161023.12115-2-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi   | 80 +++++++++++++++++++
+ 1 file changed, 80 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -66,6 +66,15 @@
+ 		regulator-max-microvolt = <1800000>;
+ 		vin-supply = <&vcc_1v8_p>;
+ 	};
++
++	sdio_pwrseq: pwrseq-sdio {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rk817 1>;
++		clock-names = "ext_clock";
++		pinctrl-names = "default";
++		pinctrl-0 = <&wifi_reg_on_h>;
++		reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
++	};
+ };
+ 
+ &cpu0 {
+@@ -287,6 +296,20 @@
+ };
+ 
+ &pinctrl {
++	bluetooth {
++		bt_host_wake_h: bt-host-wake-h {
++			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		bt_reg_on_h: bt-reg-on-h {
++			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		bt_wake_host_h: bt-wake-host-h {
++			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
+ 	pmic {
+ 		pmic_int_l: pmic-int-l {
+ 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+@@ -298,6 +321,16 @@
+ 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ 		};
+ 	};
++
++	wifi {
++		wifi_reg_on_h: wifi-reg-on-h {
++			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wifi_host_wake_h: wifi-host-wake-h {
++			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
+ };
+ 
+ &pmu_io_domains {
+@@ -318,6 +351,34 @@
+ 	status = "okay";
+ };
+ 
++&sdmmc1 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	bus-width = <4>;
++	disable-wp;
++	cap-sd-highspeed;
++	cap-sdio-irq;
++	keep-power-in-suspend;
++	mmc-pwrseq = <&sdio_pwrseq>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
++	sd-uhs-sdr104;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++
++	wifi@1 {
++		compatible = "brcm,bcm43455-fmac";
++		reg = <1>;
++		interrupt-parent = <&gpio2>;
++		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
++		interrupt-names = "host-wake";
++		pinctrl-names = "default";
++		pinctrl-0 = <&wifi_host_wake_h>;
++	};
++};
++
+ &sdhci {
+ 	bus-width = <8>;
+ 	max-frequency = <200000000>;
+@@ -330,6 +391,25 @@
+ 	status = "okay";
+ };
+ 
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
++	status = "okay";
++
++	bluetooth {
++		compatible = "brcm,bcm4345c5";
++		clocks = <&rk817 1>;
++		clock-names = "lpo";
++		device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
++		host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
++		reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
++		vbat-supply = <&vcc_3v3>;
++		vddio-supply = <&vcc_1v8>;
++	};
++};
++
+ &usb2phy0 {
+ 	status = "okay";
+ };