path: root/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts

/*
 * Aerohive HiveAP-330 Device Tree Source
 *
 * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>

/include/ "fsl/p1020si-pre.dtsi"
/ {
	model = "Aerohive HiveAP-330";
	compatible = "aerohive,hiveap-330";

	aliases {
		led-boot = &led_power_green;
		led-failsafe = &led_fault_red;
		led-running = &led_power_green;
		led-upgrade = &led_fault_red;
		label-mac-device = &enet0;
		spi0 = &spi0;
	};

	chosen {
		/*
		 * not yet implemented.
		 * stdout-path = &serial0 ":9600n8";
		 * <https://www.spinics.net/lists/devicetree-compiler/msg02487.html>
		 *
		 * this should work... but it doesn't because CONFIG_CMDLINE in our
		 * OpenWrt's target config sets "console=ttyS0,115200"
		 * stdout-path = "/soc@ffe00000/serial@4500:9600n8";
		 */

		bootargs = "console=ttyS0,9600n8";
	};

	cpus {
		PowerPC,P1020@0 {
			i-cache-sets = <0x80>;
			i-cache-size = <0x8000>;
			i-cache-block-size = <0x20>;
			d-cache-sets = <0x80>;
			d-cache-size = <0x8000>;
			d-cache-block-size = <0x20>;
			status = "okay";
			clock-frequency = <533333328>; /* 533.33 MHz */
			bus-frequency = <266666664>;  /* 266.66 MHz */
			timebase-frequency = <33333333>; /* 33.33 MHz */
		};

		PowerPC,P1020@1 {
			i-cache-sets = <0x80>;
			i-cache-size = <0x8000>;
			i-cache-block-size = <0x20>;
			d-cache-sets = <0x80>;
			d-cache-size = <0x8000>;
			d-cache-block-size = <0x20>;
			cpu-release-addr = <0x00 0xffff240>;
			enable-method = "spin-table";
			status = "disabled";
			clock-frequency = <533333328>;
			bus-frequency = <266666664>;
			timebase-frequency = <33333333>;
		};
	};

	memory {
		#address-cells = <2>;
		#size-cells = <2>;

		reg = <0x00 0x00 0x00 0x10000000>;
		device_type = "memory";
	};

	/*
	 * Usually, u-boot provided /memreserve/ properties by adding them during boot.
	 * these have been converted to reserved-memory entries.
	 */
	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		/*
		 * /memreserve/   0x0000000000ffa000 0x0000000000004000;
		 * The kernel complains when booting:
		 *
		 * | OF: fdt: Reserved memory: failed to reserve memory for node
		 *		'firmware@ffa000': base 0x00ffa000, size 0 MiB
		 *
		 * But this likely uboot's bootargs + modified DTB. And if so, we don't care.
		 * This is because we rely on our own dtb that's in the simpleImage.
		 *
		 * Note: This is backed up by u-boot. just before the kernel executes
		 *	 it prints this final line:
		 *	 |  Loading Device Tree to 00ff9000, end 00fff1c4 ... OK
		 *
		 * firmware@ffa000 {
		 *	reg = <0x0 0xffa000 0x0 0x4000>;
		 *	no-map;
		 * };
		 */

		// /memreserve/   0x000000000fe2f000 0x0000000000000021;
		firmware@fe2f000 {
			reg = <0x0 0xfe2f000 0x0 0x21>;
			no-map;
		};

		/*
		 * /memreserve/   0x000000000ffff000 0x0000000000001000;
		 * that's the spin-table - see second CPU core binding.
		 */
		firmware@ffff000 {
			reg = <0x0 0xffff000 0x0 0x1000>;
			no-map;
		};
	};

	board_lbc: lbc: localbus@ffe05000 {
		bus-frequency = <16666666>; /* 16.66 MHz */
		reg = <0 0xffe05000 0 0x1000>;
		ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;

		nor@0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x4000000>;
			bank-width = <2>;
			device-width = <1>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				firmware@0 {
					reg = <0x0 0x3f00000>;
					label = "firmware";
					/*
					 * This unknown/invalid compatible prevents
					 * openwrt's mtdsplit_fit to go off a tangent if it
					 * finds a magic value inside the uncompressed kernel
					 * at a blocksized aligned place.
					 */
					compatible = "areohive,hiveap-330-image";
				};

				partition@0 {
					reg = <0x0 0x40000>;
					label = "dtb";
				};

				partition@40000 {
					compatible = "openwrt,uimage", "denx,uimage";
					reg = <0x40000 0x3ec0000>;
					label = "kernel";
				};

				partition@3f00000 {
					reg = <0x3f00000 0x20000>;
					label = "hw-info";
					read-only;

					nvmem-layout {
						compatible = "fixed-layout";
						#address-cells = <1>;
						#size-cells = <1>;

						macaddr_hwinfo_0: macaddr@0 {
							compatible = "mac-base";
							reg = <0x0 0x6>;
							#nvmem-cell-cells = <1>;
						};
					};
				};

				partition@3f20000 {
					reg = <0x3f20000 0x20000>;
					label = "boot-info";
					read-only;
				};

				partition@3f40000 {
					reg = <0x3f40000 0x20000>;
					label = "boot-info-backup";
					read-only;
				};

				partition@3f60000 {
					reg = <0x3f60000 0x20000>;
					label = "u-boot-env";
				};

				partition@3f80000 {
					reg = <0x3f80000 0x80000>;
					label = "u-boot";
					read-only;
				};
			};
		};
	};

	board_soc: soc: soc@ffe00000 {
		ranges = <0x0 0x0 0xffe00000 0x100000>;
		bus-frequency = <266666664>;

		spi0: spi@7000 {
			#address-cells = <1>;
			#size-cells = <0>;

			temperature-sensor@1 {
				compatible = "ti,tmp125";
				reg = <1>;
				spi-max-frequency = <5000000>;
			};
		};

		i2c@3100 {
			tpm@29 {
				compatible = "atmel,at97sc3204t";
				reg = <0x29>;
			};

			lp5521@32 {
				compatible = "national,lp5521";
				reg = <0x32>;
				clock-mode = /bits/ 8 <2>;
				#address-cells = <1>;
				#size-cells = <0>;

#if 1
				led_fault_red: led@0 {
					reg = <0>;
					chan-name = "fault:red";
					led-cur = /bits/ 8 <0x2f>;
					max-cur = /bits/ 8 <0x5f>;
					color = <LED_COLOR_ID_RED>;
					function = LED_FUNCTION_FAULT;
				};
				led_power_green: led@1 {
					reg = <1>;
					chan-name = "power:green";
					led-cur = /bits/ 8 <0x2f>;
					max-cur = /bits/ 8 <0x5f>;
					color = <LED_COLOR_ID_GREEN>;
					function = LED_FUNCTION_POWER;
				};
				led@2{
					reg = <2>;
					chan-name = "blue";
					led-cur = /bits/ 8 <0x2f>;
					max-cur = /bits/ 8 <0x5f>;
					color = <LED_COLOR_ID_BLUE>;
				};
#else
				/*
				 * openwrt isn't ready to handle multi-intensity leds yet
				 * # echo 255 255 255 > /sys/class/leds/tricolor/multi_intensity
				 * # echo 255 > /sys/class/leds/tricolor/brightness
				 */

				rgbled-0 {
					function = LED_FUNCTION_POWER;
					color = <LED_COLOR_ID_RGB>;
					#address-cells = <1>;
					#size-cells = <0>;

					led@0 {
						reg = <0>;
						chan-name = "tricolor";
						led-cur = /bits/ 8 <0x2f>;
						max-cur = /bits/ 8 <0x5f>;
						color = <LED_COLOR_ID_RED>;
					};
					led@1 {
						reg = <1>;
						chan-name = "tricolor";
						led-cur = /bits/ 8 <0x2f>;
						max-cur = /bits/ 8 <0x5f>;
						color = <LED_COLOR_ID_GREEN>;
					};
					led@2{
						reg = <2>;
						chan-name = "tricolor";
						led-cur = /bits/ 8 <0x2f>;
						max-cur = /bits/ 8 <0x5f>;
						color = <LED_COLOR_ID_BLUE>;
					};
				};
#endif
			};

			eeprom@51 {
				/*
				 * 1Kbit I2C/SMBus EEPROM with SHA-1 Engine
				 * Aerohive calls it "dallas".
				 */
				compatible = "adi,ds28cn01";
				reg = <0x51>;
				read-only;
			};
		};

		mdio@24000 {
			phy0: ethernet-phy@0 {
				/* interrupts = <3 1 0 0>; */
				reg = <0x1>;
			};

			phy1: ethernet-phy@1 {
				/* interrupts = <2 1 0 0>; */
				reg = <0x2>;
			};
		};

		mdio@25000 {
			status = "disabled";
		};

		mdio@26000 {
			status = "disabled";
		};

		enet0: ethernet@b0000 {
			rx-stash-idx = <0x00>;
			rx-stash-len = <0x60>;
			bd-stash;
			status = "okay";
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";
			nvmem-cells = <&macaddr_hwinfo_0 0>;
			nvmem-cell-names = "mac-address";
		};

		enet1: ethernet@b1000 {
			status = "disabled";
		};

		enet2: ethernet@b2000 {
			rx-stash-idx = <0x00>;
			rx-stash-len = <0x60>;
			bd-stash;
			status = "okay";
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";
			nvmem-cells = <&macaddr_hwinfo_0 1>;
			nvmem-cell-names = "mac-address";
		};

		gpio0: gpio-controller@fc00 {
		};

		usb@22000 {
			phy_type = "ulpi";
			dr_mode = "host";
		};

		usb@23000 {
			status = "disabled";
		};
	};

	pci0: pcie@ffe09000 {
		reg = <0x0 0xffe09000 0x0 0x1000>;
		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000>,
			 <0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000>,
				 <0x1000000 0x0 0x00000000 0x1000000 0x0 0x00000000 0x0 0x00100000>;
		};
	};

	pci1: pcie@ffe0a000 {
		reg = <0x0 0xffe0a000 0x0 0x1000>;
		ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>,
			 <0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;

		pcie@0 {
			ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000>,
				 <0x1000000 0x0 0x00000000 0x1000000 0x0 0x00000000 0x0 0x00100000>;
		};
	};

	buttons {
		compatible = "gpio-keys";

		reset {
			label = "Reset button";
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

/include/ "fsl/p1020si-post.dtsi"
&serial0 {
	clock-frequency = <266666664>;
};

&serial1 {
	clock-frequency = <266666664>;
};

/*
 * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
 * aliases to determine PCI domain numbers, drop aliases so as not to
 * change the sysfs path of our wireless netdevs.
 */

/ {
	aliases {
		/delete-property/ pci0;
		/delete-property/ pci1;
	};
};