path: root/package/boot/uboot-mediatek/patches/160-net-phy-add-support-for-Airoha-ethernet-PHY-driver.patch

From 70157a6148ad47734f1dc646b4157ca83cc5df9f Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Thu, 13 Jul 2023 16:34:48 +0800
Subject: [PATCH] net: phy: add support for Airoha ethernet PHY driver

This patch adds support for Airoha ethernet PHY driver.

If GMAC2 of your board connects to Airoha EN8801S, please change the eth
node as follow:

&eth {
        status = "okay";
        mediatek,gmac-id = <1>;
        mediatek,sgmiisys = <&sgmiisys1>;
        phy-mode = "sgmii";
        phy-handle = <&phy5>;

        phy5: eth-phy@5 {
                reg = <24>;
        };
};

If GMAC2 of your board connects to Airoha EN8811H, please change the eth
node as follow:

&eth {
        status = "okay";
        mediatek,gmac-id = <1>;
        mediatek,sgmiisys = <&sgmiisys1>;
        phy-mode = "2500base-x";
        phy-handle = <&phy5>;

        fixed-link {
                speed = <2500>;
                full-duplex;
        };

        phy5: eth-phy@5 {
                reg = <15>;
        };
};

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
 .../drivers/net/phy/Kconfig                   |   15 +
 .../drivers/net/phy/Makefile                  |    2 +
 .../drivers/net/phy/air_en8801s.c             |  633 ++
 .../drivers/net/phy/air_en8801s.h             |  267 +
 .../drivers/net/phy/air_en8811h.c             |  649 ++
 .../drivers/net/phy/air_en8811h.h             |  160 +
 .../drivers/net/phy/air_en8811h_fw.h          | 9227 +++++++++++++++++
 7 files changed, 10953 insertions(+)
 create mode 100644 drivers/net/phy/air_en8801s.c
 create mode 100644 drivers/net/phy/air_en8801s.h
 create mode 100644 drivers/net/phy/air_en8811h.c
 create mode 100644 drivers/net/phy/air_en8811h.h
 create mode 100644 drivers/net/phy/air_en8811h_fw.h

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -77,6 +77,37 @@ config PHY_ADIN
 	help
 		Add support for configuring RGMII on Analog Devices ADIN PHYs.
 
+menuconfig PHY_AIROHA
+	bool "Airoha Ethernet PHYs support"
+
+config PHY_AIROHA_EN8801S
+	bool "Airoha Ethernet EN8801S support"
+	depends on PHY_AIROHA
+	help
+		AIROHA EN8801S supported.
+
+config PHY_AIROHA_EN8811H
+	bool "Airoha Ethernet EN8811H support"
+	depends on PHY_AIROHA
+	help
+		AIROHA EN8811H supported.
+
+choice
+	prompt "Location of the Airoha PHY firmware"
+	default PHY_AIROHA_FW_IN_UBI
+	depends on PHY_AIROHA_EN8811H
+
+config PHY_AIROHA_FW_IN_MMC
+	bool "Airoha firmware in MMC boot1 partition"
+
+config PHY_AIROHA_FW_IN_UBI
+	bool "Airoha firmware in UBI volume en8811h-fw on NAND flash"
+
+config PHY_AIROHA_FW_IN_MTD
+	bool "Airoha firmware in MTD partition on raw flash"
+
+endchoice
+
 menuconfig PHY_AQUANTIA
 	bool "Aquantia Ethernet PHYs support"
 	select PHY_GIGE
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_MV88E6352_SWITCH) += mv88e6
 obj-$(CONFIG_PHYLIB) += phy.o
 obj-$(CONFIG_PHYLIB_10G) += generic_10g.o
 obj-$(CONFIG_PHY_ADIN) += adin.o
+obj-$(CONFIG_PHY_AIROHA_EN8801S) += air_en8801s.o
+obj-$(CONFIG_PHY_AIROHA_EN8811H) += air_en8811h.o
 obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o
 obj-$(CONFIG_PHY_ATHEROS) += atheros.o
 obj-$(CONFIG_PHY_BROADCOM) += broadcom.o
--- /dev/null
+++ b/drivers/net/phy/air_en8801s.c
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0
+/*************************************************
+ * FILE NAME:  air_en8801s.c
+ * PURPOSE:
+ *      EN8801S PHY Driver for Uboot
+ * NOTES:
+ *
+ *  Copyright (C) 2023 Airoha Technology Corp.
+ *************************************************/
+
+/* INCLUDE FILE DECLARATIONS
+ */
+#include <common.h>
+#include <phy.h>
+#include <errno.h>
+#include <version.h>
+#include "air_en8801s.h"
+
+#if AIR_UBOOT_REVISION > 0x202004
+#include <linux/delay.h>
+#endif
+
+static struct phy_device *s_phydev = 0;
+/******************************************************
+ * The following led_cfg example is for reference only.
+ * LED5 1000M/LINK/ACT   (GPIO5)  <-> BASE_T_LED0,
+ * LED6 10/100M/LINK/ACT (GPIO9)  <-> BASE_T_LED1,
+ * LED4 100M/LINK/ACT    (GPIO8)  <-> BASE_T_LED2,
+ ******************************************************/
+/* User-defined.B */
+#define AIR_LED_SUPPORT
+#ifdef AIR_LED_SUPPORT
+static const AIR_BASE_T_LED_CFG_T led_cfg[4] =
+{
+    /*
+     *    LED Enable,     GPIO,       LED Polarity,            LED ON,               LED Blink
+     */
+         {LED_ENABLE,       5,       AIR_ACTIVE_LOW,      BASE_T_LED0_ON_CFG,    BASE_T_LED0_BLK_CFG}, /* BASE-T LED0 */
+         {LED_ENABLE,       9,       AIR_ACTIVE_LOW,      BASE_T_LED1_ON_CFG,    BASE_T_LED1_BLK_CFG}, /* BASE-T LED1 */
+         {LED_ENABLE,       8,       AIR_ACTIVE_LOW,      BASE_T_LED2_ON_CFG,    BASE_T_LED2_BLK_CFG}, /* BASE-T LED2 */
+         {LED_DISABLE,      1,       AIR_ACTIVE_LOW,      BASE_T_LED3_ON_CFG,    BASE_T_LED3_BLK_CFG}  /* BASE-T LED3 */
+};
+static const u16 led_dur = UNIT_LED_BLINK_DURATION << AIR_LED_BLK_DUR_64M;
+#endif
+/* User-defined.E */
+/************************************************************************
+ *                  F U N C T I O N S
+ ************************************************************************/
+/* Airoha MII read function */
+static int airoha_cl22_read(struct mii_dev *bus, int phy_addr, int phy_register)
+{
+    int read_data = bus->read(bus, phy_addr, MDIO_DEVAD_NONE, phy_register);
+
+    if (read_data < 0)
+        return -EIO;
+    return read_data;
+}
+
+/* Airoha MII write function */
+static int airoha_cl22_write(struct mii_dev *bus, int phy_addr, int phy_register, int write_data)
+{
+    int ret = bus->write(bus, phy_addr, MDIO_DEVAD_NONE, phy_register, write_data);
+
+    return ret;
+}
+
+static int airoha_cl45_write(struct phy_device *phydev, int devad, int reg, int val)
+{
+    int ret = 0;
+
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad);
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg);
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad);
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, val);
+    AIR_RTN_ERR(ret);
+    return ret;
+}
+
+static int airoha_cl45_read(struct phy_device *phydev, int devad, int reg)
+{
+    int read_data, ret;
+
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad);
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg);
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad);
+    AIR_RTN_ERR(ret);
+    read_data = phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG);
+    if (read_data < 0)
+        return -EIO;
+    return read_data;
+}
+
+/* EN8801 PBUS write function */
+int airoha_pbus_write(struct mii_dev *bus, int pbus_addr, int pbus_reg, unsigned long pbus_data)
+{
+    int ret = 0;
+
+    ret = airoha_cl22_write(bus, pbus_addr, 0x1F, (pbus_reg >> 6));
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl22_write(bus, pbus_addr, ((pbus_reg >> 2) & 0xf), (pbus_data & 0xFFFF));
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl22_write(bus, pbus_addr, 0x10, (pbus_data >> 16));
+    AIR_RTN_ERR(ret);
+    return ret;
+}
+
+/* EN8801 PBUS read function */
+unsigned long airoha_pbus_read(struct mii_dev *bus, int pbus_addr, int pbus_reg)
+{
+    unsigned long pbus_data;
+    unsigned int pbus_data_low, pbus_data_high;
+
+    airoha_cl22_write(bus, pbus_addr, 0x1F, (pbus_reg >> 6));
+    pbus_data_low = airoha_cl22_read(bus, pbus_addr, ((pbus_reg >> 2) & 0xf));
+    pbus_data_high = airoha_cl22_read(bus, pbus_addr, 0x10);
+    pbus_data = (pbus_data_high << 16) + pbus_data_low;
+    return pbus_data;
+}
+
+/* Airoha Token Ring Write function */
+static int airoha_tr_reg_write(struct phy_device *phydev, unsigned long tr_address, unsigned long tr_data)
+{
+    int ret;
+
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, 0x52b5);       /* page select */
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x11, (int)(tr_data & 0xffff));
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x12, (int)(tr_data >> 16));
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (int)(tr_address | TrReg_WR));
+    AIR_RTN_ERR(ret);
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, 0x0);          /* page resetore */
+    AIR_RTN_ERR(ret);
+    return ret;
+}
+
+int airoha_phy_process(void)
+{
+    int ret = 0, pbus_addr = EN8801S_PBUS_PHY_ID;
+    unsigned long pbus_data;
+    struct mii_dev *mbus;
+
+    mbus = s_phydev->bus;
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x19e0);
+    pbus_data |= BIT(0);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x19e0, pbus_data);
+    if(ret)
+        printf("error: airoha_pbus_write fail ret: %d\n", ret);
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x19e0);
+    pbus_data &= ~BIT(0);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x19e0, pbus_data);
+    if(ret)
+        printf("error: airoha_pbus_write fail ret: %d\n", ret);
+
+    if(ret)
+        printf("error: FCM regs reset fail, ret: %d\n", ret);
+    else
+        debug("FCM regs reset successful\n");
+    return ret;
+}
+
+#ifdef  AIR_LED_SUPPORT
+static int airoha_led_set_usr_def(struct phy_device *phydev, u8 entity, int polar,
+                                   u16 on_evt, u16 blk_evt)
+{
+    int ret = 0;
+
+    if (AIR_ACTIVE_HIGH == polar) {
+        on_evt |= LED_ON_POL;
+    } else {
+        on_evt &= ~LED_ON_POL;
+    }
+    ret = airoha_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), on_evt | LED_ON_EN);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt);
+    AIR_RTN_ERR(ret);
+    return 0;
+}
+
+static int airoha_led_set_mode(struct phy_device *phydev, u8 mode)
+{
+    u16 cl45_data;
+    int err = 0;
+
+    cl45_data = airoha_cl45_read(phydev, 0x1f, LED_BCR);
+    switch (mode) {
+    case AIR_LED_MODE_DISABLE:
+        cl45_data &= ~LED_BCR_EXT_CTRL;
+        cl45_data &= ~LED_BCR_MODE_MASK;
+        cl45_data |= LED_BCR_MODE_DISABLE;
+        break;
+    case AIR_LED_MODE_USER_DEFINE:
+        cl45_data |= LED_BCR_EXT_CTRL;
+		cl45_data |= LED_BCR_CLK_EN;
+        break;
+    default:
+        printf("LED mode%d is not supported!\n", mode);
+        return -EINVAL;
+    }
+    err = airoha_cl45_write(phydev, 0x1f, LED_BCR, cl45_data);
+    AIR_RTN_ERR(err);
+    return 0;
+}
+
+static int airoha_led_set_state(struct phy_device *phydev, u8 entity, u8 state)
+{
+    u16 cl45_data;
+    int err;
+
+    cl45_data = airoha_cl45_read(phydev, 0x1f, LED_ON_CTRL(entity));
+    if (LED_ENABLE == state) {
+        cl45_data |= LED_ON_EN;
+    } else {
+        cl45_data &= ~LED_ON_EN;
+    }
+
+    err = airoha_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), cl45_data);
+    AIR_RTN_ERR(err);
+    return 0;
+}
+
+static int en8801s_led_init(struct phy_device *phydev)
+{
+
+    unsigned long led_gpio = 0, reg_value = 0;
+    int ret = 0, led_id;
+    struct mii_dev *mbus = phydev->bus;
+    int gpio_led_rg[3] = {0x1870, 0x1874, 0x1878};
+    u16 cl45_data = led_dur;
+
+    ret = airoha_cl45_write(phydev, 0x1f, LED_BLK_DUR, cl45_data);
+    AIR_RTN_ERR(ret);
+    cl45_data >>= 1;
+    ret = airoha_cl45_write(phydev, 0x1f, LED_ON_DUR, cl45_data);
+    AIR_RTN_ERR(ret);
+    ret = airoha_led_set_mode(phydev, AIR_LED_MODE_USER_DEFINE);
+    if (ret != 0) {
+        printf("LED fail to set mode, ret %d !\n", ret);
+        return ret;
+    }
+    for(led_id = 0; led_id < EN8801S_LED_COUNT; led_id++) {
+        reg_value = 0;
+        ret = airoha_led_set_state(phydev, led_id, led_cfg[led_id].en);
+        if (ret != 0) {
+            printf("LED fail to set state, ret %d !\n", ret);
+            return ret;
+        }
+        if (LED_ENABLE == led_cfg[led_id].en) {
+            if ( (led_cfg[led_id].gpio < 0) || led_cfg[led_id].gpio > 9) {
+                printf("GPIO%d is out of range!! GPIO number is 0~9.\n", led_cfg[led_id].gpio);
+                return -EIO;
+            }
+            led_gpio |= BIT(led_cfg[led_id].gpio);
+            reg_value = airoha_pbus_read(mbus, EN8801S_PBUS_PHY_ID, gpio_led_rg[led_cfg[led_id].gpio / 4]);
+            LED_SET_GPIO_SEL(led_cfg[led_id].gpio, led_id, reg_value);
+            debug("[Airoha] gpio%d, reg_value 0x%lx\n", led_cfg[led_id].gpio, reg_value);
+            ret = airoha_pbus_write(mbus, EN8801S_PBUS_PHY_ID, gpio_led_rg[led_cfg[led_id].gpio / 4], reg_value);
+            AIR_RTN_ERR(ret);
+            ret = airoha_led_set_usr_def(phydev, led_id, led_cfg[led_id].pol, led_cfg[led_id].on_cfg, led_cfg[led_id].blk_cfg);
+            if (ret != 0) {
+                printf("LED fail to set usr def, ret %d !\n", ret);
+                return ret;
+            }
+        }
+    }
+    reg_value = (airoha_pbus_read(mbus, EN8801S_PBUS_PHY_ID, 0x1880) & ~led_gpio);
+    ret = airoha_pbus_write(mbus, EN8801S_PBUS_PHY_ID, 0x1880, reg_value);
+    AIR_RTN_ERR(ret);
+    ret = airoha_pbus_write(mbus, EN8801S_PBUS_PHY_ID, 0x186c, led_gpio);
+    AIR_RTN_ERR(ret);
+
+    printf("LED initialize OK !\n");
+    return 0;
+}
+#endif /* AIR_LED_SUPPORT */
+
+static int en8801s_config(struct phy_device *phydev)
+{
+    int reg_value = 0, ret = 0;
+    struct mii_dev *mbus = phydev->bus;
+    int retry, pbus_addr = EN8801S_PBUS_DEFAULT_ID;
+    int phy_addr = EN8801S_MDIO_PHY_ID;
+    unsigned long pbus_data = 0;
+    gephy_all_REG_LpiReg1Ch      GPHY_RG_LPI_1C;
+    gephy_all_REG_dev1Eh_reg324h GPHY_RG_1E_324;
+    gephy_all_REG_dev1Eh_reg012h GPHY_RG_1E_012;
+    gephy_all_REG_dev1Eh_reg017h GPHY_RG_1E_017;
+
+    s_phydev = phydev;
+    retry = MAX_OUI_CHECK;
+    while (1) {
+        /* PHY OUI */
+        pbus_data = airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_ETHER_PHY_OUI);
+        if (EN8801S_PBUS_OUI == pbus_data) {
+            printf("PBUS addr 0x%x: Start initialized.\n", pbus_addr);
+            ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_BUCK_CTL, 0x03);
+            AIR_RTN_ERR(ret);
+            break;
+        } else
+            pbus_addr = EN8801S_PBUS_PHY_ID;
+
+        if (0 == --retry) {
+            printf("EN8801S Probe fail !\n");
+            return 0;
+        }
+    }
+
+    /* SMI ADDR */
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_SMI_ADDR);
+    pbus_data = (pbus_data & 0xffff0000) | (unsigned long)(pbus_addr << 8) | (unsigned long)(EN8801S_MDIO_DEFAULT_ID);
+    ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_SMI_ADDR, pbus_data);
+    AIR_RTN_ERR(ret);
+    mdelay(10);
+
+    pbus_data = (airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_LTR_CTL) & (~0x3)) | BIT(2) ;
+    ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_LTR_CTL, pbus_data);
+    AIR_RTN_ERR(ret);
+    mdelay(500);
+    pbus_data = (pbus_data & ~BIT(2)) | EN8801S_RX_POLARITY_NORMAL | EN8801S_TX_POLARITY_NORMAL;
+    ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_LTR_CTL, pbus_data);
+    AIR_RTN_ERR(ret);
+    mdelay(500);
+    /* SMI ADDR */
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, EN8801S_RG_SMI_ADDR);
+    pbus_data = (pbus_data & 0xffff0000) | (unsigned long)(EN8801S_PBUS_PHY_ID << 8) | (unsigned long)(EN8801S_MDIO_PHY_ID);
+    ret = airoha_pbus_write(mbus, pbus_addr, EN8801S_RG_SMI_ADDR, pbus_data);
+    pbus_addr = EN8801S_PBUS_PHY_ID;
+    AIR_RTN_ERR(ret);
+    mdelay(10);
+
+    /* Optimze 10M IoT */
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1690);
+    pbus_data |= (1 << 31);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x1690, pbus_data);
+    AIR_RTN_ERR(ret);
+    /* set SGMII Base Page */
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00);
+    AIR_RTN_ERR(ret);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD801);
+    AIR_RTN_ERR(ret);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x0,  0x9140);
+    AIR_RTN_ERR(ret);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x0003);
+    AIR_RTN_ERR(ret);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00);
+    AIR_RTN_ERR(ret);
+    /* Set FCM control */
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x004b);
+    AIR_RTN_ERR(ret);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007);
+    AIR_RTN_ERR(ret);
+
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x142c, 0x05050505);
+    AIR_RTN_ERR(ret);
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1440);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x1440, pbus_data & ~BIT(11));
+    AIR_RTN_ERR(ret);
+
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1408);
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x1408, pbus_data | BIT(5));
+    AIR_RTN_ERR(ret);
+
+    /* Set GPHY Perfomance*/
+    /* Token Ring */
+    ret = airoha_tr_reg_write(phydev, RgAddr_R1000DEC_15h, 0x0055A0);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_R1000DEC_17h, 0x07FF3F);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_PMA_00h,      0x00001E);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_PMA_01h,      0x6FB90A);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_PMA_17h,      0x060671);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_PMA_18h,      0x0E2F00);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_TR_26h,       0x444444);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_03h,     0x000000);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_06h,     0x2EBAEF);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_08h,     0x00000B);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_0Ch,     0x00504D);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_0Dh,     0x02314F);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_0Fh,     0x003028);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_10h,     0x005010);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_11h,     0x040001);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_13h,     0x018670);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_14h,     0x00024A);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_1Bh,     0x000072);
+    AIR_RTN_ERR(ret);
+    ret = airoha_tr_reg_write(phydev, RgAddr_DSPF_1Ch,     0x003210);
+    AIR_RTN_ERR(ret);
+    /* CL22 & CL45 */
+    ret = airoha_cl22_write(mbus, phy_addr, 0x1f, 0x03);
+    AIR_RTN_ERR(ret);
+    GPHY_RG_LPI_1C.DATA = airoha_cl22_read(mbus, phy_addr, RgAddr_LPI_1Ch);
+    if (GPHY_RG_LPI_1C.DATA < 0)
+        return -EIO;
+    GPHY_RG_LPI_1C.DataBitField.smi_deton_th = 0x0C;
+    ret = airoha_cl22_write(mbus, phy_addr, RgAddr_LPI_1Ch, GPHY_RG_LPI_1C.DATA);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl22_write(mbus, phy_addr, RgAddr_LPI_1Ch, 0xC92);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl22_write(mbus, phy_addr, RgAddr_AUXILIARY_1Dh, 0x1);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl22_write(mbus, phy_addr, 0x1f, 0x0);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x120, 0x8014);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x122, 0xffff);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x123, 0xffff);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x144, 0x0200);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x14A, 0xEE20);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x189, 0x0110);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x19B, 0x0111);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x234, 0x0181);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x238, 0x0120);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x239, 0x0117);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x268, 0x07F4);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x2D1, 0x0733);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x323, 0x0011);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x324, 0x013F);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x326, 0x0037);
+    AIR_RTN_ERR(ret);
+
+    reg_value = airoha_cl45_read(phydev, 0x1E, 0x324);
+    if (reg_value < 0)
+        return -EIO;
+    GPHY_RG_1E_324.DATA = (int)reg_value;
+    GPHY_RG_1E_324.DataBitField.smi_det_deglitch_off = 0;
+    ret = airoha_cl45_write(phydev, 0x1E, 0x324, GPHY_RG_1E_324.DATA);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x19E, 0xC2);
+    AIR_RTN_ERR(ret);
+    ret = airoha_cl45_write(phydev, 0x1E, 0x013, 0x0);
+    AIR_RTN_ERR(ret);
+
+    /* EFUSE */
+    airoha_pbus_write(mbus, pbus_addr, 0x1C08, 0x40000040);
+    retry = MAX_RETRY;
+    while (0 != retry) {
+        mdelay(1);
+        pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C08);
+        if ((pbus_data & (1 << 30)) == 0) {
+            break;
+        }
+        retry--;
+    }
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C38);          /* RAW#2 */
+    reg_value = airoha_cl45_read(phydev, 0x1E, 0x12);
+    if (reg_value < 0)
+        return -EIO;
+    GPHY_RG_1E_012.DATA = reg_value;
+    GPHY_RG_1E_012.DataBitField.da_tx_i2mpb_a_tbt = pbus_data & 0x03f;
+    ret = airoha_cl45_write(phydev, 0x1E, 0x12, GPHY_RG_1E_012.DATA);
+    AIR_RTN_ERR(ret);
+    reg_value = airoha_cl45_read(phydev, 0x1E, 0x17);
+    if (reg_value < 0)
+        return -EIO;
+    GPHY_RG_1E_017.DataBitField.da_tx_i2mpb_b_tbt = (reg_value >> 8) & 0x03f;
+    ret = airoha_cl45_write(phydev, 0x1E, 0x17, GPHY_RG_1E_017.DATA);
+    AIR_RTN_ERR(ret);
+
+    ret = airoha_pbus_write(mbus, pbus_addr, 0x1C08, 0x40400040);
+    AIR_RTN_ERR(ret);
+    retry = MAX_RETRY;
+    while (0 != retry) {
+        mdelay(1);
+        reg_value = airoha_pbus_read(mbus, pbus_addr, 0x1C08);
+        if ((reg_value & (1 << 30)) == 0) {
+            break;
+        }
+        retry--;
+    }
+    pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C30);          /* RAW#16 */
+    GPHY_RG_1E_324.DataBitField.smi_det_deglitch_off = (pbus_data >> 12) & 0x01;
+    ret = airoha_cl45_write(phydev, 0x1E, 0x324, GPHY_RG_1E_324.DATA);
+    AIR_RTN_ERR(ret);
+#ifdef AIR_LED_SUPPORT
+    ret = en8801s_led_init(phydev);
+    if (ret != 0){
+        printf("en8801s_led_init fail (ret:%d) !\n", ret);
+    }
+#endif
+    printf("EN8801S initialize OK ! (%s)\n", EN8801S_DRIVER_VERSION);
+    return 0;
+}
+
+int en8801s_read_status(struct phy_device *phydev)
+{
+    int ret, pbus_addr = EN8801S_PBUS_PHY_ID;
+    struct mii_dev *mbus;
+    unsigned long pbus_data;
+
+    mbus = phydev->bus;
+    if (SPEED_10 == phydev->speed) {
+        /* set the bit for Optimze 10M IoT */
+        debug("[Airoha] SPEED_10 0x1694\n");
+        pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1694);
+        pbus_data |= (1 << 31);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x1694, pbus_data);
+        AIR_RTN_ERR(ret);
+    } else {
+        debug("[Airoha] SPEED_1000/100 0x1694\n");
+        /* clear the bit for other speeds */
+        pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1694);
+        pbus_data &= ~(1 << 31);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x1694, pbus_data);
+        AIR_RTN_ERR(ret);
+    }
+
+    airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00);
+    if(SPEED_1000 == phydev->speed) {
+        debug("[Airoha] SPEED_1000\n");
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD801);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0,  0x9140);
+        AIR_RTN_ERR(ret);
+
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x0003);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c000c00);
+        AIR_RTN_ERR(ret);
+        mdelay(2);  /* delay 2 ms */
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x004b);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007);
+        AIR_RTN_ERR(ret);
+    }
+    else if (SPEED_100 == phydev->speed) {
+        debug("[Airoha] SPEED_100\n");
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD401);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0,  0x9140);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x0007);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c11);
+        AIR_RTN_ERR(ret);
+        mdelay(2);  /* delay 2 ms */
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x0027);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007);
+        AIR_RTN_ERR(ret);
+    }
+    else {
+        debug("[Airoha] SPEED_10\n");
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x10, 0xD001);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0,  0x9140);
+        AIR_RTN_ERR(ret);
+
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0A14, 0x000b);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x0600, 0x0c11);
+        AIR_RTN_ERR(ret);
+         mdelay(2);  /* delay 2 ms */
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x1404, 0x0047);
+        AIR_RTN_ERR(ret);
+        ret = airoha_pbus_write(mbus, pbus_addr, 0x140c, 0x0007);
+        AIR_RTN_ERR(ret);
+    }
+    return 0;
+}
+
+static int en8801s_startup(struct phy_device *phydev)
+{
+    int ret;
+
+    ret = genphy_update_link(phydev);
+    if (ret)
+        return ret;
+    ret = genphy_parse_link(phydev);
+    if (ret)
+        return ret;
+    return en8801s_read_status(phydev);
+}
+#if AIR_UBOOT_REVISION > 0x202303
+U_BOOT_PHY_DRIVER(en8801s) = {
+    .name = "Airoha EN8801S",
+    .uid = EN8801S_PHY_ID,
+    .mask = 0x0ffffff0,
+    .features = PHY_GBIT_FEATURES,
+    .config = &en8801s_config,
+    .startup = &en8801s_startup,
+    .shutdown = &genphy_shutdown,
+};
+#else
+static struct phy_driver AIR_EN8801S_driver = {
+    .name = "Airoha EN8801S",
+    .uid = EN8801S_PHY_ID,
+    .mask = 0x0ffffff0,
+    .features = PHY_GBIT_FEATURES,
+    .config = &en8801s_config,
+    .startup = &en8801s_startup,
+    .shutdown = &genphy_shutdown,
+};
+
+int phy_air_en8801s_init(void)
+{
+    phy_register(&AIR_EN8801S_driver);
+    return 0;
+}
+#endif
--- /dev/null
+++ b/drivers/net/phy/air_en8801s.h
@@ -0,0 +1,267 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*************************************************
+ * FILE NAME:  air_en8801s.h
+ * PURPOSE:
+ *      EN8801S PHY Driver for Uboot
+ * NOTES:
+ *
+ *  Copyright (C) 2023 Airoha Technology Corp.
+ *************************************************/
+
+#ifndef __EN8801S_H
+#define __EN8801S_H
+
+/************************************************************************
+*                  D E F I N E S
+************************************************************************/
+#define AIR_UBOOT_REVISION ((((U_BOOT_VERSION_NUM / 1000) % 10) << 20) | \
+		      (((U_BOOT_VERSION_NUM / 100) % 10) << 16) | \
+		      (((U_BOOT_VERSION_NUM / 10) % 10) << 12) | \
+		      ((U_BOOT_VERSION_NUM % 10) << 8) | \
+		      (((U_BOOT_VERSION_NUM_PATCH / 10) % 10) << 4) | \
+		      ((U_BOOT_VERSION_NUM_PATCH % 10) << 0))
+
+#define EN8801S_MDIO_DEFAULT_ID 0x1d
+#define EN8801S_PBUS_DEFAULT_ID (EN8801S_MDIO_DEFAULT_ID + 1)
+#define EN8801S_MDIO_PHY_ID     0x18       /* Range PHY_ADDRESS_RANGE .. 0x1e */
+#define EN8801S_PBUS_PHY_ID     (EN8801S_MDIO_PHY_ID + 1)
+#define EN8801S_DRIVER_VERSION      "v1.1.3"
+
+#define EN8801S_RG_ETHER_PHY_OUI    0x19a4
+#define EN8801S_RG_SMI_ADDR         0x19a8
+#define EN8801S_PBUS_OUI            0x17a5
+#define EN8801S_RG_BUCK_CTL         0x1a20
+#define EN8801S_RG_LTR_CTL          0x0cf8
+
+#define EN8801S_PHY_ID1         0x03a2
+#define EN8801S_PHY_ID2         0x9461
+#define EN8801S_PHY_ID          (unsigned long)((EN8801S_PHY_ID1 << 16) | EN8801S_PHY_ID2)
+
+/*
+SFP Sample for verification
+Tx Reverse, Rx Reverse
+*/
+#define EN8801S_TX_POLARITY_NORMAL   0x0
+#define EN8801S_TX_POLARITY_REVERSE  0x1
+
+#define EN8801S_RX_POLARITY_NORMAL   (0x1 << 1)
+#define EN8801S_RX_POLARITY_REVERSE  (0x0 << 1)
+
+#ifndef BIT
+#define BIT(nr)			(1UL << (nr))
+#endif
+
+#define MAX_RETRY               5
+#define MAX_OUI_CHECK           2
+
+/* CL45 MDIO control */
+#define MII_MMD_ACC_CTL_REG     0x0d
+#define MII_MMD_ADDR_DATA_REG   0x0e
+#define MMD_OP_MODE_DATA        BIT(14)
+
+#define MAX_TRG_COUNTER         5
+
+/* TokenRing Reg Access */
+#define TrReg_PKT_XMT_STA       0x8000
+#define TrReg_WR                0x8000
+#define TrReg_RD                0xA000
+
+#define RgAddr_LPI_1Ch       0x1c
+#define RgAddr_AUXILIARY_1Dh 0x1d
+#define RgAddr_PMA_00h       0x0f80
+#define RgAddr_PMA_01h       0x0f82
+#define RgAddr_PMA_17h       0x0fae
+#define RgAddr_PMA_18h       0x0fb0
+#define RgAddr_DSPF_03h      0x1686
+#define RgAddr_DSPF_06h      0x168c
+#define RgAddr_DSPF_08h      0x1690
+#define RgAddr_DSPF_0Ch      0x1698
+#define RgAddr_DSPF_0Dh      0x169a
+#define RgAddr_DSPF_0Fh      0x169e
+#define RgAddr_DSPF_10h      0x16a0
+#define RgAddr_DSPF_11h      0x16a2
+#define RgAddr_DSPF_13h      0x16a6
+#define RgAddr_DSPF_14h      0x16a8
+#define RgAddr_DSPF_1Bh      0x16b6
+#define RgAddr_DSPF_1Ch      0x16b8
+#define RgAddr_TR_26h        0x0ecc
+#define RgAddr_R1000DEC_15h  0x03aa
+#define RgAddr_R1000DEC_17h  0x03ae
+
+/*
+The following led_cfg example is for reference only.
+LED5 1000M/LINK/ACT  (GPIO5)  <-> BASE_T_LED0,
+LED6 10/100M/LINK/ACT(GPIO9)  <-> BASE_T_LED1,
+LED4 100M/LINK/ACT   (GPIO8)  <-> BASE_T_LED2,
+*/
+/* User-defined.B */
+#define BASE_T_LED0_ON_CFG      (LED_ON_EVT_LINK_1000M)
+#define BASE_T_LED0_BLK_CFG     (LED_BLK_EVT_1000M_TX_ACT | LED_BLK_EVT_1000M_RX_ACT)
+#define BASE_T_LED1_ON_CFG      (LED_ON_EVT_LINK_100M | LED_ON_EVT_LINK_10M)
+#define BASE_T_LED1_BLK_CFG     (LED_BLK_EVT_100M_TX_ACT | LED_BLK_EVT_100M_RX_ACT | \
+                                 LED_BLK_EVT_10M_TX_ACT | LED_BLK_EVT_10M_RX_ACT )
+#define BASE_T_LED2_ON_CFG      (LED_ON_EVT_LINK_100M)
+#define BASE_T_LED2_BLK_CFG     (LED_BLK_EVT_100M_TX_ACT | LED_BLK_EVT_100M_RX_ACT)
+#define BASE_T_LED3_ON_CFG      (0x0)
+#define BASE_T_LED3_BLK_CFG     (0x0)
+/* User-defined.E */
+
+#define EN8801S_LED_COUNT       4
+
+#define LED_BCR                     (0x021)
+#define LED_BCR_EXT_CTRL            (1 << 15)
+#define LED_BCR_CLK_EN              (1 << 3)
+#define LED_BCR_TIME_TEST           (1 << 2)
+#define LED_BCR_MODE_MASK           (3)
+#define LED_BCR_MODE_DISABLE        (0)
+#define LED_ON_CTRL(i)              (0x024 + ((i)*2))
+#define LED_ON_EN                   (1 << 15)
+#define LED_ON_POL                  (1 << 14)
+#define LED_ON_EVT_MASK             (0x7f)
+/* LED ON Event Option.B */
+#define LED_ON_EVT_FORCE            (1 << 6)
+#define LED_ON_EVT_LINK_DOWN        (1 << 3)
+#define LED_ON_EVT_LINK_10M         (1 << 2)
+#define LED_ON_EVT_LINK_100M        (1 << 1)
+#define LED_ON_EVT_LINK_1000M       (1 << 0)
+/* LED ON Event Option.E */
+#define LED_BLK_CTRL(i)             (0x025 + ((i)*2))
+#define LED_BLK_EVT_MASK            (0x3ff)
+/* LED Blinking Event Option.B*/
+#define LED_BLK_EVT_FORCE           (1 << 9)
+#define LED_BLK_EVT_10M_RX_ACT      (1 << 5)
+#define LED_BLK_EVT_10M_TX_ACT      (1 << 4)
+#define LED_BLK_EVT_100M_RX_ACT     (1 << 3)
+#define LED_BLK_EVT_100M_TX_ACT     (1 << 2)
+#define LED_BLK_EVT_1000M_RX_ACT    (1 << 1)
+#define LED_BLK_EVT_1000M_TX_ACT    (1 << 0)
+/* LED Blinking Event Option.E*/
+#define LED_ON_DUR                  (0x022)
+#define LED_ON_DUR_MASK             (0xffff)
+#define LED_BLK_DUR                 (0x023)
+#define LED_BLK_DUR_MASK            (0xffff)
+
+#define LED_ENABLE                  1
+#define LED_DISABLE                 0
+
+#define UNIT_LED_BLINK_DURATION     1024
+
+#define AIR_RTN_ON_ERR(cond, err)  \
+    do { if ((cond)) return (err); } while(0)
+
+#define AIR_RTN_ERR(err)                       AIR_RTN_ON_ERR(err < 0, err)
+
+#define LED_SET_EVT(reg, cod, result, bit) do         \
+    {                                                 \
+        if(reg & cod) {                               \
+            result |= bit;                            \
+        }                                             \
+    } while(0)
+
+#define LED_SET_GPIO_SEL(gpio, led, val) do           \
+    {                                                 \
+            val |= (led << (8 * (gpio % 4)));         \
+    } while(0)
+
+/* DATA TYPE DECLARATIONS
+ */
+typedef struct
+{
+    int DATA_Lo;
+    int DATA_Hi;
+}TR_DATA_T;
+
+typedef union
+{
+    struct
+    {
+        /* b[15:00] */
+        int smi_deton_wt                             : 3;
+        int smi_det_mdi_inv                          : 1;
+        int smi_detoff_wt                            : 3;
+        int smi_sigdet_debouncing_en                 : 1;
+        int smi_deton_th                             : 6;
+        int rsv_14                                   : 2;
+    } DataBitField;
+    int DATA;
+} gephy_all_REG_LpiReg1Ch, *Pgephy_all_REG_LpiReg1Ch;
+
+typedef union
+{
+    struct
+    {
+        /* b[15:00] */
+        int rg_smi_detcnt_max                        : 6;
+        int rsv_6                                    : 2;
+        int rg_smi_det_max_en                        : 1;
+        int smi_det_deglitch_off                     : 1;
+        int rsv_10                                   : 6;
+    } DataBitField;
+    int DATA;
+} gephy_all_REG_dev1Eh_reg324h, *Pgephy_all_REG_dev1Eh_reg324h;
+
+typedef union
+{
+    struct
+    {
+        /* b[15:00] */
+        int da_tx_i2mpb_a_tbt                        : 6;
+        int rsv_6                                    : 4;
+        int da_tx_i2mpb_a_gbe                        : 6;
+    } DataBitField;
+    int DATA;
+} gephy_all_REG_dev1Eh_reg012h, *Pgephy_all_REG_dev1Eh_reg012h;
+
+typedef union
+{
+    struct
+    {
+        /* b[15:00] */
+        int da_tx_i2mpb_b_tbt                        : 6;
+        int rsv_6                                    : 2;
+        int da_tx_i2mpb_b_gbe                        : 6;
+        int rsv_14                                   : 2;
+    } DataBitField;
+    int DATA;
+} gephy_all_REG_dev1Eh_reg017h, *Pgephy_all_REG_dev1Eh_reg017h;
+
+typedef struct AIR_BASE_T_LED_CFG_S
+{
+    u16 en;
+    u16 gpio;
+    u16 pol;
+    u16 on_cfg;
+    u16 blk_cfg;
+}AIR_BASE_T_LED_CFG_T;
+
+typedef enum
+{
+    AIR_LED_BLK_DUR_32M,
+    AIR_LED_BLK_DUR_64M,
+    AIR_LED_BLK_DUR_128M,
+    AIR_LED_BLK_DUR_256M,
+    AIR_LED_BLK_DUR_512M,
+    AIR_LED_BLK_DUR_1024M,
+    AIR_LED_BLK_DUR_LAST
+} AIR_LED_BLK_DUT_T;
+
+typedef enum
+{
+    AIR_ACTIVE_LOW,
+    AIR_ACTIVE_HIGH,
+} AIR_LED_POLARITY;
+typedef enum
+{
+    AIR_LED_MODE_DISABLE,
+    AIR_LED_MODE_USER_DEFINE,
+    AIR_LED_MODE_LAST
+} AIR_LED_MODE_T;
+
+/************************************************************************
+*                  F U N C T I O N    P R O T O T Y P E S
+************************************************************************/
+
+unsigned long airoha_pbus_read(struct mii_dev *bus, int pbus_addr, int pbus_reg);
+int airoha_pbus_write(struct mii_dev *bus, int pbus_addr, int pbus_reg, unsigned long pbus_data);
+int airoha_phy_process(void);
+#endif /* __EN8801S_H */
--- /dev/null
+++ b/drivers/net/phy/air_en8811h.c
@@ -0,0 +1,725 @@
+// SPDX-License-Identifier: GPL-2.0
+/*************************************************
+ * FILE NAME:  air_en8811h.c
+ * PURPOSE:
+ *      EN8811H PHY Driver for Uboot
+ * NOTES:
+ *
+ *  Copyright (C) 2023 Airoha Technology Corp.
+ *************************************************/
+
+/* INCLUDE FILE DECLARATIONS
+*/
+#include <common.h>
+#include <eth_phy.h>
+#include <phy.h>
+#include <errno.h>
+#include <malloc.h>
+#include <version.h>
+#include "air_en8811h.h"
+
+#ifdef CONFIG_PHY_AIROHA_FW_IN_UBI
+#include <ubi_uboot.h>
+#endif
+
+#ifdef CONFIG_PHY_AIROHA_FW_IN_MMC
+#include <mmc.h>
+#endif
+
+#ifdef CONFIG_PHY_AIROHA_FW_IN_MTD
+#include <mtd.h>
+#endif
+
+#if AIR_UBOOT_REVISION > 0x202004
+#include <linux/delay.h>
+#endif
+
+/**************************
+ * GPIO5  <-> BASE_T_LED0,
+ * GPIO4  <-> BASE_T_LED1,
+ * GPIO3  <-> BASE_T_LED2,
+ **************************/
+/* User-defined.B */
+#define AIR_LED_SUPPORT
+#ifdef AIR_LED_SUPPORT
+static const struct air_base_t_led_cfg_s led_cfg[3] = {
+/*********************************************************************
+ *Enable,   GPIO,        LED Polarity,     LED ON,      LED Blink
+**********************************************************************/
+    {1, AIR_LED0_GPIO5, AIR_ACTIVE_HIGH, AIR_LED0_ON, AIR_LED0_BLK},
+    {1, AIR_LED1_GPIO4, AIR_ACTIVE_HIGH, AIR_LED1_ON, AIR_LED1_BLK},
+    {1, AIR_LED2_GPIO3, AIR_ACTIVE_HIGH, AIR_LED2_ON, AIR_LED2_BLK},
+};
+static const u16 led_dur = UNIT_LED_BLINK_DURATION << AIR_LED_BLK_DUR_64M;
+#endif
+/* User-defined.E */
+/*************************************************************
+ *                       F U N C T I O N S
+ **************************************************************/
+/* Airoha MII read function */
+static int air_mii_cl22_read(struct mii_dev *bus, int phy_addr, int phy_register)
+{
+    int read_data = bus->read(bus, phy_addr, MDIO_DEVAD_NONE, phy_register);
+
+    if (read_data < 0)
+        return -EIO;
+    return read_data;
+}
+
+/* Airoha MII write function */
+static int air_mii_cl22_write(struct mii_dev *bus, int phy_addr, int phy_register, int write_data)
+{
+    int ret = 0;
+
+    ret = bus->write(bus, phy_addr, MDIO_DEVAD_NONE, phy_register, write_data);
+    if (ret < 0) {
+        printf("bus->write, ret: %d\n", ret);
+        return ret;
+    }
+    return ret;
+}
+
+static int air_mii_cl45_read(struct phy_device *phydev, int devad, u16 reg)
+{
+    int ret = 0;
+    int data;
+
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return INVALID_DATA;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return INVALID_DATA;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return INVALID_DATA;
+    }
+    data = phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG);
+    return data;
+}
+
+static int air_mii_cl45_write(struct phy_device *phydev, int devad, u16 reg, u16 write_data)
+{
+    int ret = 0;
+
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, devad);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, reg);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_ADDR_DATA_REG, write_data);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    return 0;
+}
+/* Use default PBUS_PHY_ID */
+/* EN8811H PBUS write function */
+static int air_pbus_reg_write(struct phy_device *phydev, unsigned long pbus_address, unsigned long pbus_data)
+{
+    int ret = 0;
+    struct mii_dev *mbus = phydev->bus;
+
+    ret = air_mii_cl22_write(mbus, ((phydev->addr) + 8), 0x1F, (unsigned int)(pbus_address >> 6));
+    if (ret < 0)
+        return ret;
+    ret = air_mii_cl22_write(mbus, ((phydev->addr) + 8), (unsigned int)((pbus_address >> 2) & 0xf), (unsigned int)(pbus_data & 0xFFFF));
+    if (ret < 0)
+        return ret;
+    ret = air_mii_cl22_write(mbus, ((phydev->addr) + 8), 0x10, (unsigned int)(pbus_data >> 16));
+    if (ret < 0)
+        return ret;
+    return 0;
+}
+
+/* EN8811H BUCK write function */
+static int air_buckpbus_reg_write(struct phy_device *phydev, unsigned long pbus_address, unsigned int pbus_data)
+{
+    int ret = 0;
+
+    /* page 4 */
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)4);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (unsigned int)0);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x11, (unsigned int)((pbus_address >> 16) & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x12, (unsigned int)(pbus_address & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x13, (unsigned int)((pbus_data >> 16) & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, (unsigned int)(pbus_data & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    return 0;
+}
+
+/* EN8811H BUCK read function */
+static unsigned int air_buckpbus_reg_read(struct phy_device *phydev, unsigned long pbus_address)
+{
+    unsigned int pbus_data = 0, pbus_data_low, pbus_data_high;
+    int ret = 0;
+
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)4);        /* page 4 */
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return PBUS_INVALID_DATA;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (unsigned int)0);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return PBUS_INVALID_DATA;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x15, (unsigned int)((pbus_address >> 16) & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return PBUS_INVALID_DATA;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x16, (unsigned int)(pbus_address & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return PBUS_INVALID_DATA;
+    }
+
+    pbus_data_high = phy_read(phydev, MDIO_DEVAD_NONE, 0x17);
+    pbus_data_low = phy_read(phydev, MDIO_DEVAD_NONE, 0x18);
+    pbus_data = (pbus_data_high << 16) + pbus_data_low;
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)0);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    return pbus_data;
+}
+
+static int MDIOWriteBuf(struct phy_device *phydev, unsigned long address, unsigned long array_size, const unsigned char *buffer)
+{
+    unsigned int write_data, offset ;
+    int ret = 0;
+
+    /* page 4 */
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)4);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    /* address increment*/
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x10, (unsigned int)0x8000);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x11, (unsigned int)((address >> 16) & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x12, (unsigned int)(address & 0xffff));
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+
+    for (offset = 0; offset < array_size; offset += 4) {
+        write_data = (buffer[offset + 3] << 8) | buffer[offset + 2];
+        ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x13, write_data);
+        if (ret < 0) {
+            printf("phy_write, ret: %d\n", ret);
+            return ret;
+        }
+        write_data = (buffer[offset + 1] << 8) | buffer[offset];
+        ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, write_data);
+        if (ret < 0) {
+            printf("phy_write, ret: %d\n", ret);
+            return ret;
+        }
+    }
+    ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x1F, (unsigned int)0);
+    if (ret < 0) {
+        printf("phy_write, ret: %d\n", ret);
+        return ret;
+    }
+    return 0;
+}
+
+#ifdef  AIR_LED_SUPPORT
+static int airoha_led_set_usr_def(struct phy_device *phydev, u8 entity, int polar,
+                                   u16 on_evt, u16 blk_evt)
+{
+    int ret = 0;
+
+    if (AIR_ACTIVE_HIGH == polar)
+        on_evt |= LED_ON_POL;
+    else
+        on_evt &= ~LED_ON_POL;
+
+    ret = air_mii_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), on_evt | LED_ON_EN);
+    if (ret < 0)
+        return ret;
+    ret = air_mii_cl45_write(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt);
+    if (ret < 0)
+        return ret;
+    return 0;
+}
+
+static int airoha_led_set_mode(struct phy_device *phydev, u8 mode)
+{
+    u16 cl45_data;
+    int err = 0;
+
+    cl45_data = air_mii_cl45_read(phydev, 0x1f, LED_BCR);
+    switch (mode) {
+    case AIR_LED_MODE_DISABLE:
+        cl45_data &= ~LED_BCR_EXT_CTRL;
+        cl45_data &= ~LED_BCR_MODE_MASK;
+        cl45_data |= LED_BCR_MODE_DISABLE;
+        break;
+    case AIR_LED_MODE_USER_DEFINE:
+        cl45_data |= LED_BCR_EXT_CTRL;
+        cl45_data |= LED_BCR_CLK_EN;
+        break;
+    default:
+        printf("LED mode%d is not supported!\n", mode);
+        return -EINVAL;
+    }
+    err = air_mii_cl45_write(phydev, 0x1f, LED_BCR, cl45_data);
+    if (err < 0)
+        return err;
+    return 0;
+}
+
+static int airoha_led_set_state(struct phy_device *phydev, u8 entity, u8 state)
+{
+    u16 cl45_data;
+    int err;
+
+    cl45_data = air_mii_cl45_read(phydev, 0x1f, LED_ON_CTRL(entity));
+    if (LED_ENABLE == state)
+        cl45_data |= LED_ON_EN;
+    else
+        cl45_data &= ~LED_ON_EN;
+
+    err = air_mii_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), cl45_data);
+    if (err < 0)
+        return err;
+    return 0;
+}
+
+static int en8811h_led_init(struct phy_device *phydev)
+{
+    unsigned int led_gpio = 0, reg_value = 0;
+    u16 cl45_data = led_dur;
+    int ret, led_id;
+
+    cl45_data = UNIT_LED_BLINK_DURATION << AIR_LED_BLK_DUR_64M;
+    ret = air_mii_cl45_write(phydev, 0x1f, LED_BLK_DUR, cl45_data);
+    if (ret < 0)
+        return ret;
+    cl45_data >>= 1;
+    ret = air_mii_cl45_write(phydev, 0x1f, LED_ON_DUR, cl45_data);
+    if (ret < 0)
+        return ret;
+
+    ret = airoha_led_set_mode(phydev, AIR_LED_MODE_USER_DEFINE);
+    if (ret != 0) {
+        printf("LED fail to set mode, ret %d !\n", ret);
+        return ret;
+    }
+    for(led_id = 0; led_id < EN8811H_LED_COUNT; led_id++)
+    {
+        /* LED0 <-> GPIO5, LED1 <-> GPIO4, LED0 <-> GPIO3 */
+        if ( led_cfg[led_id].gpio != (led_id + (AIR_LED0_GPIO5 - (2 * led_id)))) {
+            printf("LED%d uses incorrect GPIO%d !\n", led_id, led_cfg[led_id].gpio);
+            return -EINVAL;
+        }
+        reg_value = 0;
+        if (led_cfg[led_id].en == LED_ENABLE)
+        {
+            led_gpio |= BIT(led_cfg[led_id].gpio);
+            ret = airoha_led_set_state(phydev, led_id, led_cfg[led_id].en);
+            if (ret != 0) {
+                printf("LED fail to set state, ret %d !\n", ret);
+                return ret;
+            }
+            ret = airoha_led_set_usr_def(phydev, led_id, led_cfg[led_id].pol, led_cfg[led_id].on_cfg, led_cfg[led_id].blk_cfg);
+            if (ret != 0) {
+                printf("LED fail to set default, ret %d !\n", ret);
+                return ret;
+            }
+        }
+    }
+    ret = air_buckpbus_reg_write(phydev, 0xcf8b8, led_gpio);
+    if (ret < 0)
+        return ret;
+    printf("LED initialize OK !\n");
+    return 0;
+}
+#endif /* AIR_LED_SUPPORT */
+
+static char *firmware_buf;
+static int en8811h_load_firmware(struct phy_device *phydev)
+{
+    u32 pbus_value;
+    int ret = 0;
+
+    if (!firmware_buf) {
+        firmware_buf = malloc(EN8811H_MD32_DM_SIZE + EN8811H_MD32_DSP_SIZE);
+        if (!firmware_buf) {
+            printf("[Airoha] cannot allocated buffer for firmware.\n");
+            return -ENOMEM;
+        }
+
+#ifdef CONFIG_PHY_AIROHA_FW_IN_UBI
+        ret = ubi_volume_read("en8811h-fw", firmware_buf, EN8811H_MD32_DM_SIZE + EN8811H_MD32_DSP_SIZE);
+        if (ret) {
+            printf("[Airoha] read firmware from UBI failed.\n");
+            free(firmware_buf);
+            firmware_buf = NULL;
+            return ret;
+        }
+#elif defined(CONFIG_PHY_AIROHA_FW_IN_MMC)
+        struct mmc *mmc = find_mmc_device(0);
+        if (!mmc) {
+            printf("[Airoha] opening MMC device failed.\n");
+            free(firmware_buf);
+            firmware_buf = NULL;
+            return -ENODEV;
+        }
+        if (mmc_init(mmc)) {
+            printf("[Airoha] initializing MMC device failed.\n");
+            free(firmware_buf);
+            firmware_buf = NULL;
+            return -ENODEV;
+        }
+        if (IS_SD(mmc)) {
+            printf("[Airoha] SD card is not supported.\n");
+            free(firmware_buf);
+            firmware_buf = NULL;
+            return -EINVAL;
+        }
+        ret = mmc_set_part_conf(mmc, 1, 2, 2);
+        if (ret) {
+            printf("[Airoha] cannot access eMMC boot1 hw partition.\n");
+            free(firmware_buf);
+            firmware_buf = NULL;
+            return ret;
+        }
+        ret = blk_dread(mmc_get_blk_desc(mmc), 0, 0x120, firmware_buf);
+        mmc_set_part_conf(mmc, 1, 1, 0);
+        if (ret != 0x120) {
+            printf("[Airoha] cannot read firmware from eMMC.\n");
+            free(firmware_buf);
+            firmware_buf = NULL;
+            return -EIO;
+        }
+#else
+#warning EN8811H firmware loading not implemented
+        free(firmware_buf);
+        firmware_buf = NULL;
+        return -EOPNOTSUPP;
+#endif
+    }
+
+    ret = air_buckpbus_reg_write(phydev, 0x0f0018, 0x0);
+    if (ret < 0)
+        return ret;
+    pbus_value = air_buckpbus_reg_read(phydev, 0x800000);
+    pbus_value |= BIT(11);
+    ret = air_buckpbus_reg_write(phydev, 0x800000, pbus_value);
+    if (ret < 0)
+        return ret;
+    /* Download DM */
+    ret = MDIOWriteBuf(phydev, 0x00000000, EN8811H_MD32_DM_SIZE, firmware_buf);
+    if (ret < 0) {
+        printf("[Airoha] MDIOWriteBuf 0x00000000 fail.\n");
+        return ret;
+    }
+    /* Download PM */
+    ret = MDIOWriteBuf(phydev, 0x00100000, EN8811H_MD32_DSP_SIZE, firmware_buf + EN8811H_MD32_DM_SIZE);
+    if (ret < 0) {
+        printf("[Airoha] MDIOWriteBuf 0x00100000 fail.\n");
+        return ret;
+    }
+    pbus_value = air_buckpbus_reg_read(phydev, 0x800000);
+    pbus_value &= ~BIT(11);
+    ret = air_buckpbus_reg_write(phydev, 0x800000, pbus_value);
+    if (ret < 0)
+        return ret;
+    ret = air_buckpbus_reg_write(phydev, 0x0f0018, 0x01);
+    if (ret < 0)
+        return ret;
+    return 0;
+}
+
+static int en8811h_config(struct phy_device *phydev)
+{
+    int ret = 0;
+    int pid1 = 0, pid2 = 0;
+
+    ret = air_pbus_reg_write(phydev, 0xcf928 , 0x0);
+    if (ret < 0)
+        return ret;
+
+    pid1 = phy_read(phydev, MDIO_DEVAD_NONE, MII_PHYSID1);
+    pid2 = phy_read(phydev, MDIO_DEVAD_NONE, MII_PHYSID2);
+    if ((EN8811H_PHY_ID1 != pid1) || (EN8811H_PHY_ID2 != pid2)) {
+        printf("EN8811H does not exist !\n");
+        return -ENODEV;
+    }
+
+    return 0;
+}
+
+static int en8811h_get_autonego(struct phy_device *phydev, int *an)
+{
+    int reg;
+    reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+    if (reg < 0)
+        return -EINVAL;
+    if (reg & BMCR_ANENABLE)
+        *an = AUTONEG_ENABLE;
+    else
+        *an = AUTONEG_DISABLE;
+    return 0;
+}
+
+static int en8811h_startup(struct phy_device *phydev)
+{
+    ofnode node = phy_get_ofnode(phydev);
+    int ret = 0, lpagb = 0, lpa = 0, common_adv_gb = 0, common_adv = 0, advgb = 0, adv = 0, reg = 0, an = AUTONEG_DISABLE, bmcr = 0, reg_value;
+    int old_link = phydev->link;
+    u32 pbus_value = 0, retry;
+
+    eth_phy_reset(phydev->dev, 1);
+    mdelay(10);
+    eth_phy_reset(phydev->dev, 0);
+    mdelay(1);
+
+    ret = en8811h_load_firmware(phydev);
+    if (ret) {
+        printf("EN8811H load firmware fail.\n");
+        return ret;
+    }
+    retry = MAX_RETRY;
+    do {
+        mdelay(300);
+        reg_value = air_mii_cl45_read(phydev, 0x1e, 0x8009);
+        if (EN8811H_PHY_READY == reg_value) {
+            printf("EN8811H PHY ready!\n");
+            break;
+        }
+        retry--;
+    } while (retry);
+    if (0 == retry) {
+        printf("EN8811H PHY is not ready. (MD32 FW Status reg: 0x%x)\n", reg_value);
+        pbus_value = air_buckpbus_reg_read(phydev, 0x3b3c);
+        printf("Check MD32 FW Version(0x3b3c) : %08x\n", pbus_value);
+        printf("EN8811H initialize fail!\n");
+        return 0;
+    }
+    /* Mode selection*/
+    printf("EN8811H Mode 1 !\n");
+    ret = air_mii_cl45_write(phydev, 0x1e, 0x800c, 0x0);
+    if (ret < 0)
+        return ret;
+    ret = air_mii_cl45_write(phydev, 0x1e, 0x800d, 0x0);
+    if (ret < 0)
+        return ret;
+    ret = air_mii_cl45_write(phydev, 0x1e, 0x800e, 0x1101);
+    if (ret < 0)
+        return ret;
+    ret = air_mii_cl45_write(phydev, 0x1e, 0x800f, 0x0002);
+    if (ret < 0)
+        return ret;
+
+    /* Serdes polarity */
+    pbus_value = air_buckpbus_reg_read(phydev, 0xca0f8);
+    pbus_value &= 0xfffffffc;
+    pbus_value |= ofnode_read_bool(node, "airoha,rx-pol-reverse") ?
+            EN8811H_RX_POLARITY_REVERSE : EN8811H_RX_POLARITY_NORMAL;
+    pbus_value |= ofnode_read_bool(node, "airoha,tx-pol-reverse") ?
+            EN8811H_TX_POLARITY_REVERSE : EN8811H_TX_POLARITY_NORMAL;
+    ret = air_buckpbus_reg_write(phydev, 0xca0f8, pbus_value);
+    if (ret < 0)
+        return ret;
+    pbus_value = air_buckpbus_reg_read(phydev, 0xca0f8);
+    printf("Tx, Rx Polarity(0xca0f8): %08x\n", pbus_value);
+    pbus_value = air_buckpbus_reg_read(phydev, 0x3b3c);
+    printf("MD32 FW Version(0x3b3c) : %08x\n", pbus_value);
+#if defined(AIR_LED_SUPPORT)
+    ret = en8811h_led_init(phydev);
+    if (ret < 0) {
+        printf("en8811h_led_init fail\n");
+    }
+#endif
+    printf("EN8811H initialize OK ! (%s)\n", EN8811H_DRIVER_VERSION);
+
+    ret = genphy_update_link(phydev);
+    if (ret)
+    {
+        printf("ret %d!\n", ret);
+        return ret;
+    }
+
+    ret = genphy_parse_link(phydev);
+    if (ret)
+    {
+        printf("ret %d!\n", ret);
+        return ret;
+    }
+
+    if (old_link && phydev->link)
+       return 0;
+
+    phydev->speed = SPEED_100;
+    phydev->duplex = DUPLEX_FULL;
+    phydev->pause = 0;
+    phydev->asym_pause = 0;
+
+    reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+    if (reg < 0)
+    {
+        printf("MII_BMSR reg %d!\n", reg);
+        return reg;
+    }
+    reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+    if (reg < 0)
+    {
+        printf("MII_BMSR reg %d!\n", reg);
+        return reg;
+    }
+    if(reg & BMSR_LSTATUS)
+    {
+        pbus_value = air_buckpbus_reg_read(phydev, 0x109D4);
+        if (0x10 & pbus_value) {
+            phydev->speed = SPEED_2500;
+            phydev->duplex = DUPLEX_FULL;
+        }
+        else
+        {
+            ret = en8811h_get_autonego(phydev, &an);
+            if ((AUTONEG_ENABLE == an) && (0 == ret))
+            {
+                printf("AN mode!\n");
+                printf("SPEED 1000/100!\n");
+                lpagb = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000);
+                if (lpagb < 0 )
+                    return lpagb;
+                advgb = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
+                if (adv < 0 )
+                    return adv;
+                common_adv_gb = (lpagb & (advgb << 2));
+
+                lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA);
+                if (lpa < 0 )
+                    return lpa;
+                adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
+                if (adv < 0 )
+                    return adv;
+                common_adv = (lpa & adv);
+
+                phydev->speed = SPEED_10;
+                phydev->duplex = DUPLEX_HALF;
+                if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF))
+                {
+                    phydev->speed = SPEED_1000;
+                    if (common_adv_gb & LPA_1000FULL)
+
+                        phydev->duplex = DUPLEX_FULL;
+                }
+                else if (common_adv & (LPA_100FULL | LPA_100HALF))
+                {
+                    phydev->speed = SPEED_100;
+                    if (common_adv & LPA_100FULL)
+                        phydev->duplex = DUPLEX_FULL;
+                }
+                else
+                {
+                    if (common_adv & LPA_10FULL)
+                        phydev->duplex = DUPLEX_FULL;
+                }
+            }
+            else
+            {
+                printf("Force mode!\n");
+                bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+                if (bmcr < 0)
+                    return bmcr;
+
+                if (bmcr & BMCR_FULLDPLX)
+                    phydev->duplex = DUPLEX_FULL;
+                else
+                    phydev->duplex = DUPLEX_HALF;
+
+                if (bmcr & BMCR_SPEED1000)
+                    phydev->speed = SPEED_1000;
+                else if (bmcr & BMCR_SPEED100)
+                    phydev->speed = SPEED_100;
+                else
+                    phydev->speed = SPEED_100;
+            }
+        }
+    }
+
+    return ret;
+}
+
+#if AIR_UBOOT_REVISION > 0x202303
+U_BOOT_PHY_DRIVER(en8811h) = {
+    .name = "Airoha EN8811H",
+    .uid = EN8811H_PHY_ID,
+    .mask = 0x0ffffff0,
+    .config = &en8811h_config,
+    .startup = &en8811h_startup,
+    .shutdown = &genphy_shutdown,
+};
+#else
+static struct phy_driver AIR_EN8811H_driver = {
+    .name = "Airoha EN8811H",
+    .uid = EN8811H_PHY_ID,
+    .mask = 0x0ffffff0,
+    .config = &en8811h_config,
+    .startup = &en8811h_startup,
+    .shutdown = &genphy_shutdown,
+};
+
+int phy_air_en8811h_init(void)
+{
+    phy_register(&AIR_EN8811H_driver);
+    return 0;
+}
+#endif
--- /dev/null
+++ b/drivers/net/phy/air_en8811h.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*************************************************
+ * FILE NAME:  air_en8811h.h
+ * PURPOSE:
+ *      EN8811H PHY Driver for Uboot
+ * NOTES:
+ *
+ *  Copyright (C) 2023 Airoha Technology Corp.
+ *************************************************/
+
+#ifndef __EN8811H_H
+#define __EN8811H_H
+
+#define AIR_UBOOT_REVISION ((((U_BOOT_VERSION_NUM / 1000) % 10) << 20) | \
+			(((U_BOOT_VERSION_NUM / 100) % 10) << 16) | \
+			(((U_BOOT_VERSION_NUM / 10) % 10) << 12) | \
+			((U_BOOT_VERSION_NUM % 10) << 8) | \
+			(((U_BOOT_VERSION_NUM_PATCH / 10) % 10) << 4) | \
+			((U_BOOT_VERSION_NUM_PATCH % 10) << 0))
+
+#define EN8811H_PHY_ID1             0x03a2
+#define EN8811H_PHY_ID2             0xa411
+#define EN8811H_PHY_ID              ((EN8811H_PHY_ID1 << 16) | EN8811H_PHY_ID2)
+#define EN8811H_SPEED_2500          0x03
+#define EN8811H_PHY_READY           0x02
+#define MAX_RETRY                   5
+
+#define EN8811H_MD32_DM_SIZE   0x4000
+#define EN8811H_MD32_DSP_SIZE  0x20000
+
+#define EN8811H_TX_POLARITY_NORMAL   0x1
+#define EN8811H_TX_POLARITY_REVERSE  0x0
+
+#define EN8811H_RX_POLARITY_NORMAL  (0x0 << 1)
+#define EN8811H_RX_POLARITY_REVERSE (0x1 << 1)
+
+#ifndef BIT
+#define BIT(nr)			(1UL << (nr))
+#endif
+
+/* CL45 MDIO control */
+#define MII_MMD_ACC_CTL_REG         0x0d
+#define MII_MMD_ADDR_DATA_REG       0x0e
+#define MMD_OP_MODE_DATA            BIT(14)
+/* MultiGBASE-T AN register */
+#define MULTIG_ANAR_2500M           (0x0080)
+#define MULTIG_LPAR_2500M           (0x0020)
+
+#define EN8811H_DRIVER_VERSION  "v1.0.4"
+
+/************************************************************
+ * For reference only
+ * LED0 Link 2500/Blink 2500 TxRx (GPIO5)    <-> BASE_T_LED0,
+ * LED1 Link 1000/Blink 1000 TxRx (GPIO4)    <-> BASE_T_LED1,
+ * LED2 Link 100/Blink 100 TxRx   (GPIO3)    <-> BASE_T_LED2,
+ ************************************************************/
+/* User-defined.B */
+#define AIR_LED0_ON      (LED_ON_EVT_LINK_2500M)
+#define AIR_LED0_BLK     (LED_BLK_EVT_2500M_TX_ACT | LED_BLK_EVT_2500M_RX_ACT)
+#define AIR_LED1_ON      (LED_ON_EVT_LINK_1000M)
+#define AIR_LED1_BLK    (LED_BLK_EVT_1000M_TX_ACT | LED_BLK_EVT_1000M_RX_ACT)
+#define AIR_LED2_ON      (LED_ON_EVT_LINK_100M)
+#define AIR_LED2_BLK     (LED_BLK_EVT_100M_TX_ACT | LED_BLK_EVT_100M_RX_ACT)
+/* User-defined.E */
+
+#define LED_ON_CTRL(i)              (0x024 + ((i)*2))
+#define LED_ON_EN                   (1 << 15)
+#define LED_ON_POL                  (1 << 14)
+#define LED_ON_EVT_MASK             (0x1ff)
+/* LED ON Event Option.B */
+#define LED_ON_EVT_LINK_2500M       (1 << 8)
+#define LED_ON_EVT_FORCE            (1 << 6)
+#define LED_ON_EVT_HDX              (1 << 5)
+#define LED_ON_EVT_FDX              (1 << 4)
+#define LED_ON_EVT_LINK_DOWN        (1 << 3)
+#define LED_ON_EVT_LINK_100M        (1 << 1)
+#define LED_ON_EVT_LINK_1000M       (1 << 0)
+/* LED ON Event Option.E */
+
+#define LED_BLK_CTRL(i)             (0x025 + ((i)*2))
+#define LED_BLK_EVT_MASK            (0xfff)
+/* LED Blinking Event Option.B*/
+#define LED_BLK_EVT_2500M_RX_ACT    (1 << 11)
+#define LED_BLK_EVT_2500M_TX_ACT    (1 << 10)
+#define LED_BLK_EVT_FORCE           (1 << 9)
+#define LED_BLK_EVT_100M_RX_ACT     (1 << 3)
+#define LED_BLK_EVT_100M_TX_ACT     (1 << 2)
+#define LED_BLK_EVT_1000M_RX_ACT    (1 << 1)
+#define LED_BLK_EVT_1000M_TX_ACT    (1 << 0)
+/* LED Blinking Event Option.E*/
+#define LED_ENABLE                  1
+#define LED_DISABLE                 0
+
+#define EN8811H_LED_COUNT       3
+
+#define LED_BCR                     (0x021)
+#define LED_BCR_EXT_CTRL            (1 << 15)
+#define LED_BCR_CLK_EN              (1 << 3)
+#define LED_BCR_TIME_TEST           (1 << 2)
+#define LED_BCR_MODE_MASK           (3)
+#define LED_BCR_MODE_DISABLE        (0)
+#define LED_BCR_MODE_2LED           (1)
+#define LED_BCR_MODE_3LED_1         (2)
+#define LED_BCR_MODE_3LED_2         (3)
+
+#define LED_ON_DUR                  (0x022)
+#define LED_ON_DUR_MASK             (0xffff)
+
+#define LED_BLK_DUR                 (0x023)
+#define LED_BLK_DUR_MASK            (0xffff)
+
+#define LED_GPIO_SEL_MASK           0x7FFFFFF
+
+#define UNIT_LED_BLINK_DURATION     1024
+
+#define INVALID_DATA                0xffff
+#define PBUS_INVALID_DATA           0xffffffff
+
+struct air_base_t_led_cfg_s {
+    u16 en;
+    u16 gpio;
+    u16 pol;
+    u16 on_cfg;
+    u16 blk_cfg;
+};
+
+enum {
+    AIR_LED2_GPIO3 = 3,
+    AIR_LED1_GPIO4,
+    AIR_LED0_GPIO5,
+    AIR_LED_LAST
+};
+
+enum {
+    AIR_BASE_T_LED0,
+    AIR_BASE_T_LED1,
+    AIR_BASE_T_LED2,
+    AIR_BASE_T_LED3
+};
+
+enum {
+    AIR_LED_BLK_DUR_32M,
+    AIR_LED_BLK_DUR_64M,
+    AIR_LED_BLK_DUR_128M,
+    AIR_LED_BLK_DUR_256M,
+    AIR_LED_BLK_DUR_512M,
+    AIR_LED_BLK_DUR_1024M,
+    AIR_LED_BLK_DUR_LAST
+};
+
+enum {
+    AIR_ACTIVE_LOW,
+    AIR_ACTIVE_HIGH,
+};
+
+enum {
+    AIR_LED_MODE_DISABLE,
+    AIR_LED_MODE_USER_DEFINE,
+    AIR_LED_MODE_LAST
+};
+
+#endif /* End of __EN8811H_MD32_H */
+
--- a/drivers/net/eth-phy-uclass.c
+++ b/drivers/net/eth-phy-uclass.c
@@ -155,7 +155,7 @@ static int eth_phy_of_to_plat(struct ude
 	return 0;
 }
 
-static void eth_phy_reset(struct udevice *dev, int value)
+void eth_phy_reset(struct udevice *dev, int value)
 {
 	struct eth_phy_device_priv *uc_priv = dev_get_uclass_priv(dev);
 	u32 delay;
--- a/include/eth_phy.h
+++ b/include/eth_phy.h
@@ -14,5 +14,6 @@ int eth_phy_binds_nodes(struct udevice *
 int eth_phy_set_mdio_bus(struct udevice *eth_dev, struct mii_dev *mdio_bus);
 struct mii_dev *eth_phy_get_mdio_bus(struct udevice *eth_dev);
 int eth_phy_get_addr(struct udevice *dev);
+void eth_phy_reset(struct udevice *dev, int value);
 
 #endif