aboutsummaryrefslogtreecommitdiff
path: root/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
Commit message (Collapse)AuthorAge
* treewide: remove files for building 5.10 kernelNick Hainke2023-05-12
| | | | | | | | | | | All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke <vincent@systemli.org>
* realtek: fix memory leak in netevent handlerJan Hoffmann2023-02-13
| | | | | | | | | The net_event_work struct is allocated, but only freed in a single case. Move the allocation to the branch where it is actually needed, and free it after the work has been done. Fixes: 03e1d93e0779 ("realtek: add driver support for routing offload") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: restructure rtl_table_read/writeJan Hoffmann2022-12-27
| | | | | | | | | | | | | | | | These two functions are identical apart from writing different values to the read/write bit. Create a new function rtl_table_exec to reduce code duplication. Also replace the unbounded busy-waiting loop. The new implementation may sleep, but as the hardware typically responds before the first poll, any callers doing many table accesses still need to make sure not to block other kernel tasks themselves. So far, polling timeout errors are only handled by logging an error, but a return value is added to allow proper handling in the future. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: simplify log messages in rtl83xx_mdio_probeJan Hoffmann2022-12-27
| | | | | | | | | | This function currently prints three messages for every switch port at KERN_INFO level. This takes a considerable amount of time during bootup and can even trigger an external watchdog. Replace these log messages by a single one at KERN_DEBUG level. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: fix dell typoJan-Niklas Burfeind2022-12-01
| | | | | | | should be add/delete or abbreviated add/del Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* realtek: ignore disabled switch portsSander Vanheule2022-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | When marking a switch port as disabled in the device tree, by using 'status = "disabled";', the switch driver fails on boot, causing a restart: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802c3064, ra == 8022b4b4 [ ... ] Call Trace: [<802c3064>] strlen+0x0/0x2c [<8022b4b4>] start_creating.part.0+0x78/0x194 [<8022bd3c>] debugfs_create_dir+0x44/0x1c0 [<80396dfc>] rtl838x_dbgfs_port_init+0x54/0x258 [<80397508>] rtl838x_dbgfs_init+0xe0/0x56c This is caused by the DSA subsystem (mostly) ignoring the port, while rtl83xx_mdio_probe() still extracts some details on this disabled port from the device tree, resulting in the usage of a NULL pointer where a port name is expected. By not probing ignoring disabled ports, no attempt is made to create a debugfs directory later. The device then boots as expected without the disabled port. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: cleanup LAG loggingMarkus Stockhausen2022-06-26
| | | | | | | | Setting up DSA bond silently fails if mode is not 802.3ad. Add log message to fix it. As we are already here harmonize all logging messages in the add/delete functions. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
* realtek: switch to use generic MDIO accessor functionsDaniel Golle2022-02-17
| | | | | | | | Instead of directly calling SoC-specific functions in order to access (paged) MII registers or MMD registers, create infrastructure to allow using the generic phy_*, phy_*_paged and phy_*_mmd functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: add support for port led configuration on RTL93XXBirger Koblitz2022-02-17
| | | | | | | | | Using the led-set attribute of a port in the dts we allow configuration of the port leds. Each led-set is being defined in the led-set configuration of the .dts, giving a specific configuration to steer the port LEDs via a serial connection. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Add Link Aggregation (aka trunking) supportBirger Koblitz2022-02-17
| | | | | | | | | This adds LAG support for all 4 SoC families, including support ofr the use of different distribution algorithm for the load- balancing between individual links. Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Allow PHY-IDs to differ from Port numbersBirger Koblitz2022-02-17
| | | | | | | | | We were using the PHY-ids (the reg entries in the PHY sections of the .dts) as the port numbers. Now scan the ports section in the .dts, and use the actual port numbers, following the phy-handle to the PHY properties. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: re-enable IPv6 routingBjørn Mork2021-10-30
| | | | | | | | | | | | | | | | | | | | | | | Commit 03e1d93e0779 ("realtek: add driver support for routing offload") added routing offload for IPv4, but broke IPv6 routing completely. The routing table is empty and cannot be updated: root@gs1900-10hp:~# ip -6 route root@gs1900-10hp:~# ip -6 route add unreachable default RTNETLINK answers: Invalid argument As a side effect, this breaks opkg on IPv4 only systems too, since uclient-fetch fails when there are no IPv6 routes: root@gs1900-10hp:~# uclient-fetch http://192.168.99.1 Downloading 'http://192.168.99.1' Failed to send request: Operation not permitted Fix by returning NOTIFY_DONE when offloading is unsupported, falling back to default behaviour. Fixes: 03e1d93e0779 ("realtek: add driver support for routing offload") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: Add debugfs support for RTL9300Birger Koblitz2021-10-09
| | | | | | Adds support for debugfs on RTL9300, in particular the drop counters. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: add driver support for routing offloadBirger Koblitz2021-10-09
| | | | | | | | Add generic support for listening to FIB and Event notifier updates and use this information to hook into the L3 hardware capabilities of the RTL SoCs. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Improve MDIO bus probing for RTL9300Birger Koblitz2021-10-09
| | | | | | | Improve handling of multi-gig ports on the RTL9300 when probing the MDIO bus. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Add driver support for TC offloadingBirger Koblitz2021-10-09
| | | | | | | | This adds support for offloading TC flower by using the Packet Inspection Engine of the RTL-SoCs. Basic infrastructure support is provide with callbacks to the tc subsystem and support for HW packet counters. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: fix kernel panic in DSA driver for 5.10INAGAKI Hiroshi2021-09-26
| | | | | | | | | | dsa_to_port function in 5.10 returns dsa_port from the port list in dsa_switch_tree, but the tree is built when the switch is registered by dsa_register_switch and it's null in rtl83xx_mdio_probe. So, we need to use dsa_to_port after the registration of the switch. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: fix compile errors in dsa driver for 5.10INAGAKI Hiroshi2021-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | this patch fixes the following errors when compiling: - dsa_switch_alloc is removed[1] - a parameter "enum dsa_tag_protocol mprot" is added to dsa_tag_protocol in dsa_switch_ops (include/net/dsa.h) - several paramters are added to "phylink_mac_link_up" in dsa_switch_ops (include/net/dsa.h) added: - int speed - int duplex - bool tx_pause - bool rx_pause - a parameter "struct switchdev_trans *trans" is added to port_vlan_filtering in dsa_switch_ops (include/net/dsa.h) [1]: https://lore.kernel.org/lkml/20191020031941.3805884-17-vivien.didelot@gmail.com/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: copy config/files/patches to 5.10INAGAKI Hiroshi2021-09-26
this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Powered by cgit, Themed by Ted Yin.