aboutsummaryrefslogtreecommitdiff
path: root/target/linux/ramips
Commit message (Collapse)AuthorAge
...
* ramips: mt7621: use lzma-loader for Sercomm NA502Szabolcs Hubai2023-11-12
| | | | | | | | | This fixes a well known "LZMA ERROR 1" error on Sercomm NA502, reported on the OpenWrt forum. [1] [1]: https://forum.openwrt.org/t/176942 Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* ramips: add encrypted SGE factory image for D-Link devicesAlan Luck2023-11-12
| | | | | | | | | | | creates SGE encrypted factory images to use via the D-Link web interface rename the old factory unencrypted images to recovery for use in the recovery console when recovery is needed DIR-1935-A1 , DIR-853-A1 , DIR-853-A3 , DIR-867-A1 , DIR-878-A1 and DIR-882-A1 Signed-off-by: Alan Luck <luckyhome2008@gmail.com>
* ramips: Cudy WR1300v2 fix mt7613 calibration data lengthFilip Milivojevic2023-11-08
| | | | | | | Since MT7613 is handled by MT7615 driver, and other devices using MT7615 have reg = <0x8000 0x4da8>; this needs updating or eeprom data fails to load. Signed-off-by: Filip Milivojevic <zekica@gmail.com>
* treewide: fix MERCUSYS brand spellingMikhail Zhilkin2023-11-03
| | | | | | | | | This commit fixes MERCUSYS brand spelling. The proper name is capitalized. Link: https://www.mercusys.com/ Link: https://github.com/torvalds/linux/blob/master/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c#L7779 Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: add support for MeiG SLT866 4G CPEDaniel Golle2023-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: - SoC: Mediatek MT7621 (MT7621AT) - Flash: 32 MiB SPI-NOR (Macronix MX25L25635E) - RAM: 128 MiB - Ethernet: Built-in, 2 x 1GbE - 3G/4G Modem: MEIG SLM828 (currently only supported with ModemManager) - SLIC: Si32185 (unsupported) - Power: 12V via barrel connector - Wifi 2.4GHz: Mediatek MT7603BE 802.11b/g/b - Wifi 5GHz: Mediatek MT7613BE 802.11ac/n/a - LEDs: 8x (7 controllable) - Buttons: 2x (RESET, WPS) Installing OpenWrt: - sysupgrade image is compatible with vendor firmware. Recovery: - Connect to any of the Ethernet ports, configure local IP: 10.10.10.3/24 (or 192.168.10.19/24, depending on OEM) - Provide firmware file named 'mt7621.img' on TFTP server. - Hold down both, RESET and WPS, then power on the board. - Watch network traffic using tcpdump or wireshark in realtime to observe progress of device requesting firmware. Once download has completed, release both buttons and wait until firmware comes up. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix wrong permissions on dts filesMikhail Zhilkin2023-11-02
| | | | | | | | | This commit fixes wrong permissions on dts files. Before the commit these dts files are executable: -rwxrwxr-x mt7620a_dlink_dir-806a-b1.dts -rwxrwxr-x mt7621_wavlink_wl-wn573hx1.dts Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: enable wireless LEDs activity blinking for TP-Link EC330-G5u v1Mikhail Zhilkin2023-10-31
| | | | | | | This commit enables wireless LEDs activity blinking for TP-Link EC330-G5u v1 router. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: fix Gigabit Ethernet port of the HiWiFi HC5861Shiji Yang2023-10-29
| | | | | | | | HiWiFi HC5861 has a GbE port which connected to the RTL8211E PHY chip. This patch adds the missing Realtek PHY driver package and sets the correct external PHYs base address to make it work again. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add support for ZyXEL LTE5398-M904Milan Krstic2023-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZyXEL LTE5398-M904 is a dual band 802.11ac indoor LTE/3G CPE with an FXS port. Specifications: * SoC: Mediatek MT7621AT * RAM: 256 MB * Flash: 128MB NAND (MX30LF1G18AC) * WiFi: MediaTek MT7603 2.4G + MediaTek MT7615 5G * Switch: 2 GbE ports MT7530 * LTE/3G: Quectel EG18-EA LTE-A Cat. 18 * SIM: 1 micro-SIM card slot * Buttons: Reset, WPS * LEDs: power (G/B), internet (G), LTE (R/G/Orange), WiFi (G), voice (G) * VoIP: 1 FXS RJ11 port * Power: 12V, 2A UART serial console: 57600,8N1 Unpopulated header J5: [o] GND [ ] key - no pin [o] RX [o] TX [o] 3.3V Vcc Installation: * Log in as root using ssh to 192.168.1.1 * scp OpenWrt initramfs-recovery.bin image to root@192.168.1.1:/tmp/ * Prepare bootloader config by running: nvram setro uboot DebugFlag 0x1 nvram setro uboot CheckBypass 0 nvram commit * Run "mtd_write -w write /tmp/initramfs-recovery.bin Kernel" and reboot * Wait for OpenWrt to boot and ssh to root@192.168.1.1 * Run sysupgrade with OpenWrt squashfs-sysupgrade.bin image For mode details about flashing see: 2449a63208 (ramips: mt7621: Add support for ZyXEL NR7101, 2021-04-19) Unsupported: * FXS/Voice Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
* ramips: TP-link archer A6/C6 device tree updatesRani Hod2023-10-22
| | | | | | | | | | | | | | | | Set correct GPIO (10) for the WPS button. This matches GPIO settings in vendor GPL sources. Note that GPL sources also mention a USB indicator LED (GPIO 13) but the device has neither an external USB port nor a USB LED. In addition, prefixes (button-, led-) are added to relevant DT entries, as well as color and function specifications for LEDs. Closes: #13736 Reported-by: Waldemar Czabaj <kaball@wp.pl> Signed-off-by: Rani Hod <rani.hod@gmail.com> (added led mitigations for wifi leds) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* Revert "ramips: convert MT7915 EEPROM to NVMEM format"Shiji Yang2023-10-17
| | | | | | | | | | | | | | | | Some MT7915 devices need to load the second part of the eeprom to work properly. The mt76 driver is not yet ready to read the pre-cal data via the NVMEM cell. Therefore, partially revert commit to fix the device probe issue on some devices. P.S. Except for D-Link and Ubnt devices, It is still uncertain whether pre-cal data is required for other devices in the patch. This partially reverts commit 9ac891f8c44124e931c15f1257347cd8ba311a19. Fixes: https://github.com/openwrt/openwrt/issues/13700 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add missing mt76 packages for Telco Electronics X1Shiji Yang2023-10-17
| | | | | | | | Telco Electronics X1 has MT7603E and MT7612E PCIe NICs. They are driven by kmod-mt7603 and kmod-mt76x2. Ref: 73e0f52b6e4e ("ramips: add support for Telco Electronics X1") Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix factory partition size for SNR-CPE-W4NShiji Yang2023-10-17
| | | | | | | | | The starting address of 'factory' partition is 0x40000, and the starting address of the next partition is 0x50000. It's obvious that the correct size for the 'factory' is 0x10000, just like other MT7620 devices. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix frequency limit property for some Edimax devicesShiji Yang2023-10-17
| | | | | | | | These three devices uses MT7612E PCIe NIC and supported by the 'mt76' driver. So the right frequency limit property should be `ieee80211-freq-limit`. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: remove useless status property from wmac dts nodeShiji Yang2023-10-17
| | | | | | | | On the ramips target, all 'wmac' nodes in SoC dtsi are enabled by default except mt7628. There is no need to mark them as 'okay' again. So these useless properties can be removed. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert mt76 PCIe NIC EEPROM to NVMEM format for legacy SoCsShiji Yang2023-10-17
| | | | | | | | | | This patch converts MT761{0,2,3} PCIe WiFi calibration data to NVMEM format for legacy Ralink SoCs (MT7620 and Mt7628). The EEPROM size of the MT7610 and MT7612 is 0x200. there are only three devices uses MT7613 NIC, ASUS RT-AC1200 V2, COMFAST CF-WR758AC V2 and Keenetic KN-1613. The EEPROM size of them is 0x4da8. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7628 EEPROM to NVMEM formatShiji Yang2023-10-17
| | | | | | | This patch converts MT7628 WiFi calibration data to NVMEM format. The EEPROM size is 0x400. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert rt2x00 EEPROM to NVMEM formatShiji Yang2023-10-17
| | | | | | | This patch converts legacy Ralink SoCs and MT7620 WiFi calibration data to NVMEM format. The EEPROM size is 0x200. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix mtd partition node names for Phicomm PSG1208Shiji Yang2023-10-17
| | | | | | | | The mtd partition node name should be "partition@${offset}". However, the offsets of the PSG1208 don't match the partition 'reg' properties. This patch correct the wrong offsets. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix DTS EEPROM property for some MT7628 devicesShiji Yang2023-10-17
| | | | | | | The MT7628 integrated wireless is driven by `mt76`, so the right EEPROM property name is `mediatek,mtd-eeprom`. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert the remaining mtd-mac-address to NVMEM formatShiji Yang2023-10-17
| | | | | | | | `mtd-mac-address` has been abandoned. Therefore, convert them to NVMEM format. This patch also removes some useless mtd-mac-address properties. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix ZyXEL NR7101 bricking typoBjørn Mork2023-10-15
| | | | | | | | | | A typo snuck in with the addition of Cudy M1800, changing "nr7101" to "nt7101". The result is a default network config for NR7101 without the only ethernet interface on the NR7101, thereby soft bricking it. Fixes: f6d394e9f2fd ("ramips: add support for Cudy M1800") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ramips: convert MT7915 EEPROM to NVMEM formatShiji Yang2023-10-09
| | | | | | | This patch converts MT7915 WiFi calibration data to NVMEM format. The EEPROM size is 0xe00. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7613 and MT7615 EEPROM to NVMEM format for MT7621Shiji Yang2023-10-09
| | | | | | | This patch converts MT7613 and MT7615 WiFi calibration data to NVMEM format. The EEPROM size is 0x4da8. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7610 and MT7612 EEPROM to NVMEM format for MT7621Shiji Yang2023-10-09
| | | | | | | This patch converts MT7610 and MT7612 WiFi calibration data to NVMEM format. The EEPROM size is 0x200. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7603 EEPROM to NVMEM formatShiji Yang2023-10-09
| | | | | | | This patch converts MT7603 WiFi calibration data to NVMEM format. The EEPROM size is 0x400. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: correct NVMEM MAC address node name and label for Bolt ArionShiji Yang2023-10-09
| | | | | | | The node name&label should match the address in the 'reg' property, so it's better to change the incorrect offset to the 0x28. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix EEPROM size for I-O DATA WN-DEAX1800GRShiji Yang2023-10-09
| | | | | | | | I-O DATA WN-DEAX1800GR uses MT7915 PCIe NIC. The correct EEPROM size is 0xe00. Fixes: ac68fbf526d ("ramips: add support for I-O DATA WN-DEAX1800GR") Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: cf-ew72-v2: Add support for COMFAST CF-EW72 V2Alexey D. Filimonov2023-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for COMFAST CF-EW72 V2 Hardware: - SoC: Mediatek MT7621 (MT7621DAT or MT7621AT) - Flash: 16 MiB NOR - RAM: 128 MiB - Ethernet: Built-in, 2 x 1GbE - Power: only 802.3af PD on any port, injector supplied in the box - PoE passthrough: No - Wifi 2.4GHz: Mediatek MT7603BE 802.11b/g/b - Wifi 5GHz: Mediatek MT7613BEN 802.11ac/n/a - LEDs: 8x (only 1 is both visible and controllable, see below) - Buttons: 1x (RESET) Installing OpenWrt: Flashing is done using Mediatek U-Boot System Recovery Mode - make wired connection with 2 cables like this: - - PC (LAN) <-> PoE Injector (LAN) - - PoE Injector (POE) <-> CF-EW72 V2 (LAN). Leave unconnected to CF-EW72 V2 yet. - configure 192.168.1.(2-254)/24 static ip address on your PC LAN - press and keep pressed RESET button on device - power the device by plugging PoE Injector (POE) <-> CF-EW72 V2 (LAN) cable - wait for about 10 seconds until wifi led stops blinking and release RESET button - navigate from your PC to http://192.168.1.1 and upload OpenWrt *-factory.bin firmware file - proceed until router starts blinking with wifi led again (flashing) and stops (rebooting to OpenWrt) MAC addresses as verified by OEM firmware: vendor OpenWrt address LAN lan\eth0 label WAN wan label + 1 2g phy0 label + 2 5g phy1 label + 3 The label MAC address was found in 0xe000. LEDs detailed: The only both visible and controllable indicator is blue:wlan LED. It is not bound by default to indicate activity of any wireless interfaces. Place (WAN->ANT) | Num | GPIO | LED name (LuCI) | Note -----------------|-----|----------------------------------------------------------------------------------------- power | 1 | | | POWER LED. Not controlled with GPIO. hidden_led_2 | 2 | 13 | blue:hidden_led_2 | This LED does not have proper hole in shell. wan | 3 | | | WAN LED. Not controlled with GPIO. hidden_led_4 | 4 | 16 | blue:hidden_led_4 | This LED does not have proper hole in shell. lan | 5 | | | LAN LED. Not controlled with GPIO. noconn_led_6 | 6 | | | Not controlled with GPIO, possibly not connected wlan | 7 | 15 | blue:wlan | WLAN LED. Wireless indicator. noconn_led_8 | 8 | | | Not controlled with GPIO, possibly not connected mt76-phy0 and mt76-phy1 leds also exist in OpenWrt, but do not exist on board. Signed-off-by: Alexey D. Filimonov <alexey@filimonic.net>
* ramips: fix Mercusys MR70X LAN port assignmentsAndreas Böhler2023-09-24
| | | | | | | | | A bug report in the forum found that the MR70X lists four LAN ports in LuCI while it has only three. This adds the device to the network setup file to fix the issue. Identified-by: Forum User "Lexeyko" Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ramips: add support for WAVLINK WL-WN573HX1Sijia Huang2023-09-24
| | | | | | | | | | | | | | | | | | | | Hardware -------- Specifications: - Device: WAVLINK WL-WN573HX1 Outdoor AP - SoC: MT7621AT - Flash: 16MB - RAM: 256MB - Switch:1 LAN (10/100/1000 Mbps) - WiFi: MT7905 2x2 2.4G + MT7975 2x2 5G - LEDs: 1x STATUS (blue, configurable) 1x LAN (green) Product link: https://www.wavlink.com/en_us/product/WL-WN573HX1.html Signed-off-by: Sijia Huang <engineer31@win-star.com>
* kernel: bump 5.15 to 5.15.132John Audia2023-09-20
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.132 Removed upstreamed: bcm53xx/patches-5.15/037-v6.6-0006-ARM-dts-BCM53573-Add-cells-sizes-to-PCIe-node.patch[1] bcm53xx/patches-5.15/037-v6.6-0007-ARM-dts-BCM53573-Use-updated-spi-gpio-binding-proper.patch[2] bcm53xx/patches-5.15/037-v6.6-0008-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=b35f3ca1877e024887df205ede952863d65dad36 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=2840d9b9c8750be270fb1153ccd5b983cbb5d592 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=f086e859ddc252c32f0438edff241859c0f022ce Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: RT1800: fix invalid octal number errorMax Qian2023-09-17
| | | | | | | | | | This commit removes the padded zeros in the date formatting. The padded zeros from the date command causes the numbers to be interpreted as an octal number by printf. Months, days, and years with the number 08 or 09 raise an error in printf as an "invalid octal number" and get interpreted as a zero. Signed-off-by: Max Qian <public@maxqia.com>
* ramips: add support for mtk eip93 crypto engineAviana Cruz2023-09-12
| | | | | | | | | Mediatek EIP93 Crypto engine is a crypto accelerator which is available in the Mediatek MT7621 SoC. Signed-off-by: Aviana Cruz <gwencroft@proton.me> Co-authored-by: Richard van Schagen <vschagen@icloud.com> Co-authored-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: backport two fixes for MediaTek Ethernet driverDaniel Golle2023-09-11
| | | | | | | | Fix PSE port assignment for 3rd GMAC on MT7988 and make sure dma_addr is always initialized to prevent potentially accessing uninitialized stack memory in the error path. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add support for ALFA Network AX1800RMPiotr Dymacz2023-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ALFA Network AX1800RM (FCC ID: 2AB877621) is a dual-band Wi-Fi 6 (AX1800) router, based on MediaTek MT7621A + MT79x5D platform. Specifications: - SOC: MT7621A (880 MHz) - DRAM: DDR3 256 MiB (Nanya NT5CC128M16JR-EK) - Flash: 16 MiB SPI NOR (EN25QH128A-104HIP) - Ethernet: 4x 10/100/1000 Mbps (SOC's built-in switch) - Wi-Fi: 2x2:2 2.4/5 GHz (MT7905DAN + MT7975DN) (MT7905DAN doesn't support background DFS scan/BT) - LED: 6x green, 1x green/red - Buttons: 2x (reset, WPS) - Antenna: 4x external, non-detachable omnidirectional - UART: 1x 4-pin (2.54 mm pitch, J4, not populated) - Power: 12 V DC/1 A (DC jack) MAC addresses: LAN: 00:c0:ca:xx:xx:4e (factory 0x4, +2) WAN: 00:c0:ca:xx:xx:4f (factory 0x4, +3) 2.4 GHz: 00:c0:ca:xx:xx:4c (factory 0x4, device's label) 5 GHz: 00:c0:ca:xx:xx:4c (factory 0xa) Flash instructions for web-based U-Boot recovery: 1. Power the device with WPS button pressed and wait around 10 seconds. 2. Setup static IP 192.168.1.2/24 on your PC. 3. Go to 192.168.1.1 in browser and upload 'recovery' image. The device runs LEDE 17.01 (kernel 4.4.x) based firmware with 'failsafe' mode available which allows alternative upgrade method: 1. Run device in 'failsafe' mode and change password for default user. 2. SSH to the device, transfer 'sysupgrade' image and perform upgrade in forced mode, without preserving settings: 'sysupgrade -n -F ...'. Other notes: If you own early version of this device, the vendor firmware might refuse OpenWrt image because of missing custom header. In that case, ask vendor's customer support for stock firmware without custom header support/requirement. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: bump 5.15 to 5.15.131John Audia2023-09-08
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.131 All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: sync MediaTek Ethernet driver with upstreamDaniel Golle2023-08-28
| | | | | | | Import commits from upstream Linux replacing some downstream patches. Move accepted patches from pending-{5.15,6.1} to backport-{5.15,6.1}. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add support for D-Link DRA-1360Rani Hod2023-08-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRA-1360 rev A is a wall-plug AC1300 repeater. Hardware is identical (same FCC ID, black case instead of white) to D-Link DAP-1620 rev B, which is already supported, but a different model name, revision, and hardware ID are needed. Thus, the bulk of the DAP-1620 device tree is extracted to a common dtsi included by the two models' device trees. Repeating specs and installation instructions from e4c7703: (note that the RAM size mentioned there was incorrect, oops) Specs: - SoC: MT7621AT (880MHz dual-core MIPS1004Kc) - Memory: 128 MiB RAM, 16 MiB NOR SPI - WiFi: MT7615DN 2x2 802.11n + 2x2 802.11ac (DBDC) - Ethernet: 1 RJ45 port 10/100/1000 - Power/status LED: red+green - LED RSSI bargraph: 2x green, 1x red+green Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 (pings are ignored, it listens only for http) - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tail -c+117 DRA1360A1_FW112B03.bin | \ openssl aes-256-cbc -d -md md5 -out decrypted.bin \ -k c471706398cb147c6619f8a04a18d53e9c17ede8 - flash decrypted.bin via D-Link Web Recovery Signed-off-by: Rani Hod <rani.hod@gmail.com>
* ramips: add support for I-O DATA WN-DEAX1800GRINAGAKI Hiroshi2023-08-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I-O DATA WN-DEAX1800GR is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (Nanya NT5CC128M16JR-EK) - Flash : RAW NAND 128 MiB (Winbond W29N01HVSINF) - WLAN : 2.4/5 GHz (MediaTek MT7915) - Ethernet : 5x 10/100/1000 Mbps - Switch : MT7530 (SoC) - LEDs/Keys : 6x/3x - UART : through-hole on PCB (J2) - assignment: 3.3V, GND, TX, RX from "1" marking - settings : 115200n8 - Power : 12 VDC, 1 A Flash instruction using initramfs-factory image: 1. Boot WN-DEAX1800GR normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs-factory.bin image and click update ("更新") button to perform firmware update 4. On the initramfs image, perform sysupgrade with the squashfs-sysupgrade.bin image 5. Wait ~120 seconds to complete flashing Note: - This device has 2x OS images on the flash storage. In this support, the first one will be used. Warning: - Do not use "saveenv" command on U-Boot CLI. This device has wrong u-boot-env data. The actual length of individual env data installed to the device is 0x1000 (4 KiB), but installed U-Boot requires 0x20000 (128 KiB). So U-Boot determines the data is invalid. Then, if you perform saving environment data with saveenv on U-Boot CLI, installed env data will be overwritten with too few default values without individual values (SSID, password, MAC addresses, etc...). MAC addresses: LAN : 50:41:B9:xx:xx:F4 (Config, ethaddr (text)) WAN : 50:41:B9:xx:xx:F6 (Config, wanaddr (text)) 2.4 GHz: 50:41:B9:xx:xx:F4 (Config, rmac (text) / Factory, 0x4 (hex)) 5 GHz : 50:41:B9:xx:xx:F5 (none) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: improve sysupgrade helpers for I-O DATA devicesINAGAKI Hiroshi2023-08-20
| | | | | | | | | | | | | | | | | | | | I-O DATA devices manufactured by MSTC (MitraStar Technology Corp.) have some important flags for booting, "bootnum" and "debugflag". The almost devices have both flags but some devices have only "bootnum" flag. So optimize helper functions in iodata.sh to set each flags. - both: - WN-AX1167GR2 - WN-AX2033GR - WN-DX1167R - WN-DX1200GR - WN-DX2033GR - "bootnum" only - WN-DEAX1800GR Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: improve Xiaomi mi-mini indicationsIvan Pavlov2023-08-14
| | | | | | Sets status indications led color on Xiaomi mi-mini router as other Xiaomi routers Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* kernel: bump 5.15 to 5.15.125John Audia2023-08-09
| | | | | | | | | | 1. Add new symbols to generic config 2. Bump kernel Changelog: https://lore.kernel.org/stable/2023080818-groin-gradient-a031@gregkh/ All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.124John Audia2023-08-09
| | | | | | | | | | | | | Changelog: https://lore.kernel.org/stable/2023080341-curliness-salary-4158@gregkh/ 1. Needed to make a change to to package/kernel/linux/modules/netsupport.mk due to upstream moving vxlan to its own directory[1]. @john-tho suggested using the the 6.1 xvlan FILES to circumvent. 2. All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.124&id=77396fa9096abdbfbb87d63e73ad44d5621cf103 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.123John Audia2023-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*] Removed upstreamed: backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2] pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3] pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4] bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5] bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499 Build system: x86/64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Audia <therealgraysky@proton.me> [rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: mt7621-wdt: use phandle to access system controller registersShiji Yang2023-07-30
| | | | | | | | | | | | | These patches allow the driver to access some watchdog registers via a phandle to the system controller node[1]. To apply these changes, we need to add "mediatek,sysctl" to the SoC dtsi. This commit also remove the redundent clocks, interrupts and resets properties. [1] https://lore.kernel.org/all/20230214103936.1061078-2-sergio.paracuellos@gmail.com Tested on Motorola MWR03 (MT7628) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for legacy SoCsShiji Yang2023-07-30
| | | | | | | | | | | | | | | | | | | | This series of upstream patches properly implement a clock and reset driver for old ralink SoCs[1]. And it includes some related fixes[2] and improvements[3][4]. All patches have been merged into linux-next. They will be part of upcoming Linux 6.5. In order to switch to the new system controller driver, all clocks and resets properties in SoC dtsi have been updated, and kernel symbol "CONFIG_CLK_MTMIPS" have been added to the kernel config files. [1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/all/20230622-mips-ralink-clk-wuninitialized-v1-1-ea9041240d10@kernel.org [3] https://lore.kernel.org/all/OSYP286MB03120BABB25900E113ED42B7BC5CA@OSYP286MB0312.JPNP286.PROD.OUTLOOK.COM [4] https://lore.kernel.org/all/TYAP286MB03151148AF8C054621DD55C3BC23A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Tested on Motorola MWR03 (MT7628) Tested on Haier HW-L1W (MT7620) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for mt7621Shiji Yang2023-07-30
| | | | | | | | | | | | | | | | | This series of upstream patches makes the system controller node as a reset provider[1][2], and it also includes some clock and reset driver fixes[3][4]. Meanwhile, all clocks and resets properties in the SoC device tree have been updated to be compatible with the new driver. [1] https://lore.kernel.org/r/20220110114930.1406665-2-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/r/20220210094859.927868-2-sergio.paracuellos@gmail.com [3] https://lore.kernel.org/r/20221217074806.3225150-1-sergio.paracuellos@gmail.com [4] https://lore.kernel.org/r/20230206083305.147582-1-sergio.paracuellos@gmail.com Tested on RAISECOM MSG1500 X.00 Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: pinctrl: support requesting different functions for same groupShiji Yang2023-07-29
| | | | | | | | | | MT7620 wireless radio needs change the pin group function between "gpio" and "pa" during the calibration process. However, ralink pinctrl driver doesn't support requesting different functions for the same group. This patch enables pinctrl consumers to perform such operations. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: use NVMEM cells with mt76 EEPROM for Netgear R6220 & WNDR3700 v5Rafał Miłecki2023-07-28
| | | | | | | This uses new upstream DT binding. It's more generic (NVMEM) compared to the old one (MTD). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Powered by cgit, Themed by Ted Yin.