aboutsummaryrefslogtreecommitdiff
path: root/target/linux/mpc85xx
Commit message (Collapse)AuthorAge
* mpc85xx: tl-wdr4900: add back 5ghz LEDRosen Penev2025-08-13
| | | | | | | | | | | | In the conversion to dts, qca,led-pin was used for both interfaces. Unfortunately, it's mutually exclusive with gpio-controller which made it not do anything. Fixes: 949e1a0 ("mpc85xx: tl-wdr4900: move platform code to dts") Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/19758 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: HPE MSM460 add HPE MSM430 aliasJan Taczanowski2025-08-07
| | | | | | | | | | | | | | | | | | | | Define MSM430 as alternative name, to explicitly show the device is supported using existing image (MSM460). I can confirm that the guide from https://github.com/blocktrron/msm460-flashing works perfectly fine with the HP MSM430 as well. In fact, the MSM430 running the original firmware operates as a 2x3:2 access point, but after flashing it with OpenWRT, it functions as a 3x3:3 access point — just like the MSM460 model. It seems that the MSM430 is essentially the same hardware as the MSM460, with limitations imposed by the original (HP) software. Signed-off-by: Jan Taczanowski <jan.taczanowski@gmail.com> Link: https://github.com/openwrt/openwrt/pull/19540 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport GCC15 fix for powerpcRosen Penev2025-07-07
| | | | | | | | Comes with kernel 6.16. I assume it will be backported at some point. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/19329 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: fix function nameDavid Bauer2025-06-11
| | | | | | | The function name is misspelled and does not exist. Fix the function name so the correct function is called. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: ath9k: replace qca,led-sourcesRosen Penev2025-05-24
| | | | | | | | | | | | Upstream seems to be using led-sources instead of custom properties. Code mostly taken from mt76. Changed all(few) users of qca,led_pin to use the new format. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18805 Signed-off-by: Robert Marko <robimarko@gmail.com>
* treewide: strip trailing whitespaceMieczyslaw Nalewaj2025-05-20
| | | | | | | | | | | | Strip trailing whitespace in all code: find . -type f | grep "\.c$" | xargs sed -i 's/[ \t]\+$//' find . -type f | grep "\.h$" | xargs sed -i 's/[ \t]\+$//' find . -type f | grep "\.dts$" | xargs sed -i 's/[ \t]\+$//' find . -type f | grep "\.dtsi$" | xargs sed -i 's/[ \t]\+$//' Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Link: https://github.com/openwrt/openwrt/pull/18626 Signed-off-by: Robert Marko <robimarko@gmail.com>
* treewide: dts: trim "#size-cells" from "gpio-export" nodeShiji Yang2025-05-18
| | | | | | | | | | The "gpio-export" driver doesn't require a "reg" property in the device tree, hence we don't need to use the "#size-cells" property to describe the size of "reg". Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/18290 Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 6.6 to 6.6.90Shiji Yang2025-05-13
| | | | | | | | | | | | | | | | Remove upstreamed patches: bcm27xx/patches-6.6/950-0481-xhci-Use-more-event-ring-segment-table-entries.patch [1] pending-6.6/691-net-ipv6-fix-UDPv6-GSO-segmentation-with-NAT.patch [2] Manually rebased patches: generic/hack-6.6/781-usb-net-rndis-support-asr.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.90&id=f377434945f528217e65fc5b18781caeba19ce72 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.90&id=e0272844995aff8cbf2cc88b78c2b35ca51eda43 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.90&id=222b6685efe0d8c1cdb078a67bbe806f56d18f94 Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/18775 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_NET_SWITCHDEV in generic configHauke Mehrtens2025-03-15
| | | | | | | | | | | | | | | | The CONFIG_NET_SWITCHDEV option is needed by CONFIG_DSA and some other options. It is boolean, we have to compile it into the kernel it self. Activate it for all targets in the generic configuration, it is already activated for most of them. This allows to install DSA drivers as a module. On the ramips/mt7620 target the kernel would grown by 4.5kB. For some small targets which do not support a DSA switch by default the option is deactivated. Link: https://github.com/openwrt/openwrt/pull/17668 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 6.6 to 6.6.64John Audia2024-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.64 Manually rebased: generic/hack-6.6/780-usb-net-MeigLink_modem_support.patch bcm27xx/patches-6.6/950-0585-drm-vc4-Introduce-generation-number-enum.patch bcm27xx/patches-6.6/950-0610-drm-vc4-hvs-Support-BCM2712-HVS.patch bcm27xx/patches-6.6/950-0829-vc4-hvs-Add-support-for-D0-register-changes.patch Removed upstreamed: bcm27xx/patches-6.6/950-0597-drm-vc4-hdmi-Avoid-hang-with-debug-registers-when-su.patch[1] bcm27xx/patches-6.6/950-0599-drm-vc4-Fix-dlist-debug-not-resetting-the-next-entry.patch[2] bcm27xx/patches-6.6/950-0600-drm-vc4-Remove-incorrect-limit-from-hvs_dlist-debugf.patch[3] bcm27xx/patches-6.6/950-0708-drm-vc4-Correct-logic-on-stopping-an-HVS-channel.patch[4] ramips/patches-6.6/002-01-v6.13-clk-ralink-mtmips-fix-clock-plan-for-Ralink-SoC-RT38.patch[5] ramips/patches-6.6/002-02-v6.13-clk-ralink-mtmips-fix-clocks-probe-order-in-oldest-r.patch[6] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=223ee2567a55e4f80315c768d2969e6a3b9fb23d 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=8182b5ca19c6f173b6498d1c6d3e4b034b76bbde 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=52c1716f65a558174e381360bd88f18dae4be85c 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=9728b508b01a5eeeac79ceb676364c674dd951ac 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=f85a1d06afbcc57ac44176db8f9d7a934979952c 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=fbb13732c6ffa9d58cedafabcd5ce8fd7ef8ae5a Build system: x86/64 Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Co-authored-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Signed-off-by: John Audia <therealgraysky@proton.me> Link: https://github.com/openwrt/openwrt/pull/17217 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: p2020: add missing symbolsRosen Penev2024-11-19
| | | | | | | | | | Since kernel_oldconfig doesn't work properly with it, I ran that first and then moved all the config symbols to config-6.6 and found the differences. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16847 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: p1020: add missing symbolsRosen Penev2024-11-19
| | | | | | | | | | Since kernel_oldconfig doesn't work properly with it, I ran that first and then moved all the config symbols to config-6.6 and found the differences. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16847 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: p1010: add missing symbolsRosen Penev2024-11-19
| | | | | | | | | | Since kernel_oldconfig doesn't work properly with it, I ran that first and then moved all the config symbols to config-6.6 and found the differences. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16847 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: run make kernel_oldconfigRosen Penev2024-11-19
| | | | | | | | Adjusts the default config to modern kernels. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16847 Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: filter out compiler opts from configRosen Penev2024-11-17
| | | | | | | | | These get dynamically set based on compiler version. Not relevant for targets. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16770 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove GCC11_NO_ARRAY_BOUNDSRosen Penev2024-11-17
| | | | | | | | This symbol is no longer present. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16770 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: move CONFIG_MTD_SPLIT_FIRMWARE upRosen Penev2024-10-24
| | | | | | | | | It's shared by all targets. Unlike the other shared symbols, it's not removed by kernel_oldconfig. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16756 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Reorder config filesHauke Mehrtens2024-10-22
| | | | | | | | | | Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: convert Watchguard T10 mac-assignment to NVMEMDavid Bauer2024-10-17
| | | | | | | | | | MAC-addresses are stored with colons, thus they can now be referenced using NVMEM. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16310 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: p1010: fix NAND devicesRosen Penev2024-10-17
| | | | | | | | | | Upstream commit 9ba0cae3cac07c21c583f9ff194f74043f90d29c made FSL_IFC visible and selectable, which means that in order for MTD_NAND_FSL_IFC to work, it needs these two extra CONFIG options. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16717 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: handle MSM460 wifi mac in dtsRosen Penev2024-10-10
| | | | | | Userspace handling is deprecated. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mpc85xx: add static to init functionsRosen Penev2024-09-07
| | | | | | | | | No reason for them not to be so. Matches various upstream commits for PPC. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16345 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: remove calibrate_decrRosen Penev2024-09-07
| | | | | | | | | With upstream commit 0aafbdf35c75cbfec82636d01e6dc7950bc1507c , this is now default. No need to override. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16345 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: replace probe with compatibleRosen Penev2024-09-07
| | | | | | | | | | Upstream commit does this for simple cases, which all of these are. Commit: 1c96fcdef8c7492ecf34ed70102a1ae5253ef9d1 Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16345 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: remove unneeded headersRosen Penev2024-09-07
| | | | | | | | | 949e1a0856c4a04ac4a3fee1bd4a0cc69ac187c5 moved this code to DTS. Not needed anymore. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16345 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: Add QCA8327 LED nodes to tl-wdr4900-v1 dtsPawel Dembicki2024-08-23
| | | | | | | | | This commit introduces led nodes in tl-wdr4900-v1 dts. It allows to configure switch leds from userspace. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16226 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: add usb trigger to tl-wdr4900-v1 ledsPawel Dembicki2024-08-23
| | | | | | | | | TP-Link tl-wdr4900-v1 has two usb leds. Modern kernels can handle usb led trigger. Let's enable it. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16226 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: refresh tl-wdr4900-v1 led configurationPawel Dembicki2024-08-23
| | | | | | | | | | | This commit change led description in dts file from old method to new approach accepted by upstream. USB power gpio is handled by gpio-export now. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16226 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: tl-wdr4900: move platform code to dtsRosen Penev2024-08-21
| | | | | | | | | No benefit in doing so in platform file. Code for dts has already been written. Might as well use it. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16125 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: use NVMEM for wifiRosen Penev2024-08-21
| | | | | | | | | | | Userspace handling is deprecated. No need for any of this. Calibration size was adjusted to 440, which is the standard value for ath9k radios. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16125 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: tl-wdr4900: use NVMEM for WANRosen Penev2024-08-21
| | | | | | | | | | Now that the ports are defined in DTS, this is trivial to do. Avoids userspace handling. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16125 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: panda: use DSA B53 driverRosen Penev2024-08-19
| | | | | | | | It's upstream and a replacement for the swconfig driver. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16124 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: fix wdr4900 ethernetRosen Penev2024-08-13
| | | | | | | | | | 997acc7f86ca985cba52f7ea8b72f0661a1e3c52 split this PHY driver up such that external QCA switches now use CONFIG_QCA83XX_PHY. Fix it here so that ethernet works again. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16154 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: remove 6.1 kernel supportPawel Dembicki2024-08-06
| | | | | | | | mpc85xx was switched to 6.6. We can remove 6.1 support now. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16087 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: switch to kernel 6.6Pawel Dembicki2024-08-06
| | | | | | | | It's time for wide tests. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16087 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mpc85xx: enable inside secure driver for PowerPC platformsJosef Schlehofer2024-07-28
| | | | | | | | | | | | | | | | | Freescale procesor has Securite Engine driver called Talitos. [1] This driver is already packaged for OpenWrt since commit bf57f33f0229564828f576b2dfb897aa0b57e85c ("kernel: Allow talitos crypto hw module selection"), but many users don't know about it. Let's include this kernel module package to default packages as it was recently done for MediaTek in commit 06c4fc6d5e1eea00e6a3ea208102407408590af8 ("kernel: enable inside secure driver for MediaTek platforms") [1] https://cateee.net/lkddb/web-lkddb/CRYPTO_DEV_TALITOS.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Link: https://github.com/openwrt/openwrt/pull/10557 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: fix label-mac-address for Enterasys WS-AP3710iDavid Bauer2024-06-16
| | | | | | | | | The WS-AP3710i does not correctly expose its label-mac on eth0 anymore since the change to simpleLoader. Fix this by obtaining the label-mac from the U-Boot environment. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix Enterasys WS-AP3710i eth mac-addressDavid Bauer2024-06-14
| | | | | | | | | | With the introduction of the simpleImage loader, the MAC address is not set by the bootloader anymore. Fix this by reading the MAC address from the U-Boot environment partition. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: only build zImage on required targetsDavid Bauer2024-06-08
| | | | | | | | | | | Make the OF-compatible zImage per-board selectable. This allows the image to only be built with the wrapper if the target actually uses it. This fixes build-failures for the mpc85xx-p2020 subtarget. Fixes: 557c094f0579 ("mpc85xx: only build zImage on required targets") Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: refresh patchesDavid Bauer2024-06-02
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix patch for kernel 6.6David Bauer2024-06-02
| | | | | | Fixes: af329ec38980 ("mpc85xx: add support for Hewlett Packard MSM460") Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add label-mac for HP MSM460David Bauer2024-06-01
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add support for Hewlett Packard MSM460David Bauer2024-06-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Freescale P1020 2xe500 PPC RAM: 256M DDR3 (Micron MT41J64M16JT-15E:G "D9MNJ") NAND: 128M (Micron 2CA1) BTN: 1x Reset LED: Power - ETH - Radio1 - Radio2 UART: RJ-45 Cisco Pinout - 115200 8N1 Installation ------------ NOTE: You can find a repo with up-to-date instructions as well as the required files here: https://github.com/blocktrron/msm460-flashing Required files ============== You need a command-files as well as a U-Boot image. The command-file has the following content (padded to 131072 bytes). If you copy paste these, remove the newlines! ``` U-BOOT setenv ethaddr 02:03:04:05:06:07; setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; tftpboot 0x3000000 msm460-uboot.bin; nand device; nand erase 0 0xC0000; nand write 0x3000000 0x0 0xC0000; reset ``` You can download the required U-Boot from this repository: https://github.com/blocktrron/u-boot-msm/releases Preparation =========== Prepare a TFTP server serving two files: - U-Boot NAND image as `msm460-uboot.bin`. - OpenWrt factory image as `msm460-factory.bin` - Command-file names `commands.tftp` You can start a TFTP server in the current directory using dnsmasq: ```bash sudo dnsmasq --no-daemon --listen-address=0.0.0.0 \ --port=0 --enable-tftp=enxd0 --tftp-root="$(pwd)" \ --user=root --group=root ``` Replace `enxd0` with the name of your network interface. Procedure ========= 1. Assign yourself the IP-Address 192.168.1.66/24. 3. Connect the Router to the PC while keeping the reset button pressed. 4. The LEDs will eventually begin to flash. They will start to flash faster after around 15 seconds. 5. Release the reset button. 6. Start a new shell 7. Make sure you are currently in the directory where the tftp server is located. 8. Run the following command: ```bash tftp 192.168.1.1 -m binary -c put commands.tftp nflashd.cccc9999 ``` You get the message "Transfer timed out." To find out if you have been successful, please check the blinking LED Pattern. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add compressed zImage for mpc85xxDavid Bauer2024-06-01
| | | | | | | | | Add a universal zImage which can be loaded by mpc85xx boards at load address 0x3000000. This allows boards to boot kernels larger than 16MB even if the image is loaded temporarily from NAND at offset 0x1000000 which some bootloaders do by default. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: convert WS-AP3710i to simpleImage wrapperDavid Bauer2024-04-29
| | | | | | | | | | | | Convert the Enterasys WS-AP3710i access point to use the simpleImage wrapper. This is necessary, as the bootlaoder does not align the DTB correctly (and does not support altering the FDT loadaddress). Booting images with kernels 5.15 and later can break depending on the alignment on the DTB within the FIT image. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix address config for ws-ap3825iMartin Kennedy2024-04-25
| | | | | | | | | | | | | | | | | | | | | | In commit 6a8b83159389 ("mpc85xx: p1010: change wrapper address of simple image devices"), we adjusted the wrapper address in the recipe code for all mpc85xx simpleimage devices, including the Extreme Networks WS-AP3825i. However, we did not also adjust the KERNEL_LOADADDR and KERNEL_ENTRY config values for this board. This broke the simpleimage wrapper loader, causing GitHub issue #15237. Adjust those config values so we go back to pointing at the right address. We don't exactly need the memory, but it's also not exactly a punishment in this case. Run-tested on a ws-ap3825i. Fixes: commit 6a8b83159389 ("mpc85xx: p1010: change wrapper address of simple image devices") Tested-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* mpc85xx: add 6.6 testing kernelPawel Dembicki2024-03-24
| | | | | | | | | | | This commit adds 6.6 kernel as testing verion. Run tested: p2020/p2020-rdb p1010/TL-WDR4900-V1 p1010/BR200-WP Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: kernel: 6.6: refresh configPawel Dembicki2024-03-24
| | | | | | | config-6.6 refreshed by 'make kernel_oldconfig' p2020 config-default refreshed manually Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: kernel: 6.6: refresh patchesPawel Dembicki2024-03-24
| | | | | | | | | | Manualy refreshed: 101-powerpc-85xx-hiveap-330-support.patch 105-powerpc-85xx-panda-support.patch Rest done by 'make target/linux/refresh' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel/mpc85xx: Restore kernel files for v6.1Pawel Dembicki2024-03-24
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Powered by cgit, Themed by Ted Yin.