| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
| |
Use tabs to align and remove some unnecessary spaces.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19741
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes the following dtc warnings for the recently added
boards:
../dts/mt7981b-zbtlink-zbt-z8102ax-v2.dts:329.35-331.4: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/macaddr@004: unit name should not have leading 0s
../dts/mt7981b-zbtlink-zbt-z8102ax-v2.dts:332.35-334.4: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/macaddr@02a: unit name should not have leading 0s
../dts/mt7981b-iptime-ax3000q.dts:267.3-13: Warning (reg_format): /soc/wifi@18000000/band@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-iptime-ax3000q.dts:273.3-13: Warning (reg_format): /soc/wifi@18000000/band@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-iptime-ax3000sm.dts:269.3-13: Warning (reg_format): /soc/wifi@18000000/band@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-iptime-ax3000sm.dts:275.3-13: Warning (reg_format): /soc/wifi@18000000/band@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-snr-snr-cpe-ax2.dts:330.3-13: Warning (reg_format): /soc/wifi@18000000/band@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-snr-snr-cpe-ax2.dts:336.3-13: Warning (reg_format): /soc/wifi@18000000/band@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-gatonetworks-gdsp-sd-boot.dtso:14.5-15: Warning (reg_format): /fragment@1/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-emmc.dtso:34.5-15: Warning (reg_format): /fragment@0/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-snfi-nand.dtso:29.7-33: Warning (reg_format): /fragment@0/__overlay__/flash@0/partitions/partition@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-snfi-nand.dtso:35.7-35: Warning (reg_format): /fragment@0/__overlay__/flash@0/partitions/partition@200000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-sd.dtso:32.5-15: Warning (reg_format): /fragment@0/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19741
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
| |
|
|
|
|
|
|
|
| |
The Mediatek pinctrl driver can only accepts drive-strength values
enumerated in "dt-bindings/pinctrl/mt65xx.h".
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19741
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are two types properties here that can control the pin bias
resistors. "mediatek,pull-{up,down}-adv" and "bias-pull-{up,down}"
actually do the same thing[1]. The first type is customized by the
Mediatek and the second type is widely used in the Linux pinctrl
framework. To avoid confusing developers, unify pinctrl bias to the
new Linux generic style.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cafe19db7751269bf6b4dd2148cbfa9fbe91d651
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19741
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
Specifications:
SoC: MediaTek MT7981B
RAM: 1024MiB
Flash: SPI-NAND 128 MiB
Switch: 1 WAN, 4 LAN (Gigabit)
USB: two M.2 slots for 5G modems via USB 3.0 hub, external USB 3.0 port
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7976CN
UART: 115200n8
UART Layout:
VCC-RX-TX-GND
Installation:
1. Power down the router and hold in the Reset button.
2. While holding in the button power up the router again.
3. Hold the button in for 10 seconds and then release.
4. Use your browser to go to 192.168.1.1
5. If you see a GUI that is for flashing firmware then you have the V2 model.
If there is no GUI and the router continues to boot up normally
you have the V1 model.
6. Now use the V2 sysugrade file.
Note: Recovery GUI it can be used to recover from an incorrect firmware flash.
Based on patches adding support for this device by Yannick Chabanois (openmptcprouter)
and Dairyman (ofmodemsandmen)
Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18514
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|