openwrt.git - OpenWrt Source Repository

	Commit message (Collapse)	Author	Age
*	mediatek: convert to new LED color/function format where possible	Christian Marangi	2024-02-07
\| \| \| \| \| \| \| \|	Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
*	mediatek: convert to nvmem-layout	Rosen Penev	2023-11-25
\| \| \| \| \| \|	Will allow removing mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
*	mediatek: fiilogic: device tree `switch@1f` fix	Rani Hod	2023-11-22
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Quite a few `fiilogic` devices use the `mt7531` switch. Some of them have a DT node that looks like: ``` switch: switch@0 { compatible = "mediatek,mt7531"; reg = <31>; ... }; ``` This commit changes the DT node name to `switch@1f`. Signed-off-by: Rani Hod <rani.hod@gmail.com>
*	mediatek: filogic: add JCG Q30 PRO support	Chukun Pan	2023-11-19
	Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: Winbond 128MB RAM: DDR3 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset Power: DC 12V 1A Flash instructions: 1. Connect to your PC via the Gigabit port of the router, set a static ip on the ethernet interface of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 2. Attach UART, pause at u-boot menu. 3. Select "Upgrade ATF BL2", then use preloader.bin 4. Select "Upgrade ATF FIP", then use bl31-uboot.fip 5. Download the initramfs image, and type "reset", waiting for tftp recovery to complete. 6. After openwrt boots up, perform sysupgrade. Note: 1. Since NMBM is disabled, we must back up all partitions. 2. Although we can upgrade new firmware in the stock firmware, we need the special fit image signature of MediaTek and dual boot (hack kernel) to make u-boot boot it. So just abandon these hacks and flash it via the serial port. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>