| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes the following dtc warnings for the recently added
boards:
../dts/mt7981b-zbtlink-zbt-z8102ax-v2.dts:329.35-331.4: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/macaddr@004: unit name should not have leading 0s
../dts/mt7981b-zbtlink-zbt-z8102ax-v2.dts:332.35-334.4: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/macaddr@02a: unit name should not have leading 0s
../dts/mt7981b-iptime-ax3000q.dts:267.3-13: Warning (reg_format): /soc/wifi@18000000/band@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-iptime-ax3000q.dts:273.3-13: Warning (reg_format): /soc/wifi@18000000/band@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-iptime-ax3000sm.dts:269.3-13: Warning (reg_format): /soc/wifi@18000000/band@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-iptime-ax3000sm.dts:275.3-13: Warning (reg_format): /soc/wifi@18000000/band@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-snr-snr-cpe-ax2.dts:330.3-13: Warning (reg_format): /soc/wifi@18000000/band@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-snr-snr-cpe-ax2.dts:336.3-13: Warning (reg_format): /soc/wifi@18000000/band@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-gatonetworks-gdsp-sd-boot.dtso:14.5-15: Warning (reg_format): /fragment@1/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-emmc.dtso:34.5-15: Warning (reg_format): /fragment@0/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-snfi-nand.dtso:29.7-33: Warning (reg_format): /fragment@0/__overlay__/flash@0/partitions/partition@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-snfi-nand.dtso:35.7-35: Warning (reg_format): /fragment@0/__overlay__/flash@0/partitions/partition@200000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
mt7988a-rfb-sd.dtso:32.5-15: Warning (reg_format): /fragment@0/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19741
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
Specification
-------------
- SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3GHz
- RAM : DDR3 256Mbytes, Nanya Technology NT5CC128M16IP
- Flash : 128Mbytes NAND Flash, ESMT F50L1G41LB
- WLAN : MediaTek MT7976CN dual-band Wi-Fi 6
- 2.4GHz : b/g/n/ax, MU-MIMO
- 5GHz : a/n/ac/ax, MU-MIMO
- Ethernet : 10/100/1000 Mbps x4, LAN (MediaTek MT7531AE)
10/100/1000 Mbps x1, WAN (MT7981 internal PHY)
- UART : 1x4 pin header on PCB
- [J500] 3.3V, TX, RX, GND (115200, 8N1)
- Buttons : WPS, Reset
- LEDs : 1x Power (Amber)
1x CPU (Amber)
1x Wi-Fi 5GHz (Amber)
1x Wi-Fi 2.4GHz (Amber)
1x WAN activity (Amber)
4x LAN activity (Amber)
- Power : 12VDC, 1A (Center positive polarity)
MAC address
-----------
+-----------+-------------------+-----------+
| Interface | MAC | Algorithm |
+-----------+-------------------+-----------+
| WLAN 2.4G | B0:38:6C:xx:xx:xx | label |
| WLAN 5G | B2:38:6C:4x:xx:xx | |
| WAN | B0:38:6C:xx:xx:xx | label + 1 |
| LAN | B0:38:6C:xx:xx:xx | label + 3 |
+-----------+-------------------+-----------+
The WLAN 2.4G MAC address was found in 'Factory' partition, 0x4
Installation
------------
1. Download the *initramfs-kernel.bin file from the OpenWrt website
2. Attach UART to the router, and interrupt the boot process by pressing '0'
If you successfully interrupt the boot process, a terminal prompt
name should look like this:
MT7981>
3. Connect the router(LAN port) to the PC
4. Assign the PC IP address: 192.168.0.100/24
5. Load and run the *initramfs-kernel.bin:
tftpboot 0x46000000 initramfs-kernel.bin
bootm
6. Upload the OpenWrt *squashfs-sysupgrade.bin to the router
7. Run 'sysupgrade -n' with the sysupgrade OpenWrt image
Signed-off-by: Donghyun Ko <nyankosoftware@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18689
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|