aboutsummaryrefslogtreecommitdiff
path: root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
Commit message (Collapse)AuthorAge
* ipq40xx: split files in 6.1 and 6.6 dedicated directoryChristian Marangi2024-04-02
| | | | | | | | | | | Since with recent kernel version DTS moved to a dedicated directory, it's required to split files to per kernel version to follow kernel version directory structure. Also makes use of DEVICE_DTS_DIR to target the correct DTS directory based on the kernel version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: convert to new LED color/function format where possibleChristian Marangi2024-02-07
| | | | | | | | Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Allows replacing mac-address-increment with mac-base. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* generic: fix silicon labs spidev bindingsVincent Tremblay2023-01-06
| | | | | | | | | | | | | | | Fix Silicon Labs bindings in the spidev driver Some bindings for Silicon Labs chips already exists upstream. These bindings can be found in trivial-devices.yaml. The existing bindings are using "silabs" instead of "siliconlabs" to identify the manufacturer. This commit add two submitted patches for silabs chips and rename the manufacturer in the different DTS for more coherence. Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
* ipq40xx: convert some boards to DSARobert Marko2022-10-02
| | | | | | | | | | | | Convert IPQ40xx boards to DSA setup. Signed-off-by: Leon M. George <leon@georgemail.eu> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org> Signed-off-by: ChunAm See <z1250747241@gmail.com> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Andrew Sim <andrewsimz@gmail.com> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: drop ESSEDMA + AR40xx DTS nodesRobert Marko2022-10-02
| | | | | | | In order to start working on IPQESS + DSA drop the old ESSEDMA + AR40xx DTS nodes. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200Christian Lamparter2022-02-19
| | | | | | | | | | | | | | | | | | Enrico provided a bootlog that shows the chip is a WAVE-2 QCA9888v2: > pci 0000:01:00.0: [168c:0056] type 00 class 0x028000 > [...] > ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56. > ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 [...] chip_id 0x00000000 sub 0000:0000 > ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,[...] > ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 6535d835 > ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 32 raw 0 hwcrypto 1 this patch switches the device over to pre-calibration. (this is more or less cosmetic) Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: limit available radio channels for GL.iNet GL-B2200Enrico Mioso2022-02-19
| | | | | | | | | The PCIe and built-in 5GHZ radios are meant to operate on different frequency bands. The hardware enforces this via RF filters. Add this information to allow software enforcing it as well. Credits to Piotr Dymacz for the invaluable help. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* ipq40xx: utilize nvmem-cells for macs & (pre-)calibration dataChristian Lamparter2022-01-15
| | | | | | | | | | | | | | | moves extraction entries out of 11-ath10k-caldata and into the individual board's device-tree. Some notes: - mmc could work as well (not tested) - devices that pass the partitions via mtdparts bootargs are kept as is - gl-b2200 has a weird pcie wifi device (vendor claims 9886 wave 2. But firmware-extraction was for a wave 1 device?!) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: fix reset button GPIO for GL.iNet GL-B2200Enrico Mioso2021-12-12
| | | | | | | | | GL.iNet's U-Boot checks for GPIO 40, not 43. Changing this allows the RESET button to work as expected. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> CC: Daniel Golle <daniel@makrotopia.org> CC: Li Zhang <li.zhang@gl-inet.com>
* ipq40xx: add support for GL.iNet GL-B2200TruongSinh Tran-Nguyen2021-12-02
This patch adds supports for the GL-B2200 router. Specifications: - SOC: Qualcomm IPQ4019 ARM Quad-Core - RAM: 512 MiB - Flash: 16 MiB NOR - SPI0 - EMMC: 8GB EMMC - ETH: Qualcomm QCA8075 - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2 - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2 - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2 - INPUT: Reset, WPS - LED: Power, Internet - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 - UART2: On board with BLE module - SPI1: On board socket for Zigbee module Update firmware instructions: Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at https://docs.gl-inet.com/en/3/troubleshooting/debrick/). Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware. Please do use the *gl-b2200-squashfs-emmc.img file, gunzipping the produced *gl-b2200-squashfs-emmc.img.gz one first. What's working: - WiFi 2G, 5G - WPA2/WPA3 Not tested: - Bluetooth LE/Zigbee Credits goes to the original authors of this patch. V1->V2: - updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake) - add uboot-envtools support V2->V3: - Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface V3->V4: - wire up sysupgrade Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [fix tab and trailing space, document what's working and what's not] Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro> [rebase on top of master, address remaining comments] Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> [remove redundant check in platform.sh] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Powered by cgit, Themed by Ted Yin.