aboutsummaryrefslogtreecommitdiff
path: root/target/linux/generic/files/drivers/net/phy
Commit message (Collapse)AuthorAge
* kernel: support for RTL8367C/S switchMieczyslaw Nalewaj2024-02-24
| | | | | | | | | | | | | | | | | | | From driver point of view no differance between rtl8367b and rtl8367s if it connected through EXT2 (rgmii only). So this trivial patch add some identification and initialization only. SGMII/HSGMII mode for EXT1 is not implemented for the sake of patch clairity. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> [Fix code format] Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [add flags to separate chip_num/chip_id detection; drop error print in rtl8367b_init_regs, drop unnecessary info prints, code style fixes] Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [rebase; use MII macros] Signed-off-by: Gaspare Bruno <gaspare@anlix.io> [code optimization] Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel: rtl8366_smi: explicitly set phy addr for switchMieczyslaw Nalewaj2024-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | By default rtl8366_smi use phy addr 0 at mii-bus to access switch registers. This patch allow to set it explicitly in dts-file: rtl8367 { compatible = "realtek,rtl8367b"; phy-id = <29>; /* switch address at mii-bus */ realtek,extif2 = <1 0 1 1 1 1 1 1 2>; mii-bus = <&mdio>; cpu-port = <7>; } Use default 0 address if not set. Backward compatibility tested on tplink archer c2 v1 (rtl8367rb switch) Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> [code style fixes, add explicit phy_id assignment in probe_plat, use phy-id instead of phy_id for of property name] Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [rebase] Signed-off-by: Gaspare Bruno <gaspare@anlix.io> [added phy_id to struct rtl8366_smi] Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* generic: rtl8366_smi: rename and drop conflicting vlan GPL symbolsChristian Marangi2023-10-06
| | | | | | | | | | | | Symbol rtl8366_enable_vlan and rtl8366_reset_vlan are also present in the DSA driver upstream and conflicts as they are EXPORTED. Rename them to rtl8366_smi_enable_vlan and rtl8366_smi_reset_vlan to fix the conflict. While at it also make them static and drop the EXPORT_SYMBOL_GPL as they are not actually used by any other driver and exporting them is useless. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: use struct group to wipe psb6970 volatile priv dataAleksander Jan Bajkowski2023-06-08
| | | | | | | | | | | | | | | | | | Instead of reference vlan and do strange subtraction, use the handy struct_group() to create a virtual struct of the same size of the members. This permits to have a more secure memset and fix compilation warning in 6.1 where additional checks are done. Fix compilation warning: | inlined from 'psb6970_reset_switch' at drivers/net/phy/psb6970.c:275:2: | ./include/linux/fortify-string.h:314:25: error: call to '__write_overflow_field' | declared with attribute warning: detected write beyond size of field | (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] | 314 | __write_overflow_field(p_size_field, size); | | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |cc1: all warnings being treated as errors Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* generic: b53: rename exported symbols to avoid upstream conflictRobert Marko2023-06-02
| | | | | | | | | | | Upstream DSA driver is exporting symbols with the same name as our downstream swconfig driver, so lets rename the downstream symbols to make them unique and avoid the conflict on 6.1 kernel. Without this change, building 6.1 with kmod-switch-bcm53xx would conflict with the B53 DSA driver and CI would fail. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: 6.1: fix swconfig not workingChristian Lamparter2023-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 6.1 swconfig is not showing up and there's a splat: | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 1 at genl_register_family+0xb4/0x81c | Modules linked in: | CPU: 0 PID: 1 Comm: swapper Not tainted 6.1.29 #0 | Hardware name: Netgear WNDR4700/WNDR4720 Series APM821XX [...] | NIP: c0599370 LR: c0599344 CTR: c08c9950 | REGS: c0c21cb0 TRAP: 0700 Not tainted (6.1.29) | MSR: 00029000 <CE,EE,ME> CR: 48000888 XER: 00000000 | | GPR00: c0002678 c0c21da0 c0c2cd80 [...] | NIP [c0599370] genl_register_family+0xb4/0x81c | LR [c0599344] genl_register_family+0x88/0x81c | Call Trace: | [c0c21d80] [c0c21df4] 0xc0c21df4 (unreliable) | [c0c21e10] [c08c9988] swconfig_init+0x38/0x64 | [c0c21e30] [c0002678] do_one_initcall+0x50/0x260 This is due to it failing to register the netlink family since changes to upstream linux in patch. | commit 9c5d03d362519f36cd551aec596388f895c93d2d |Author: Jakub Kicinski <kuba@kernel.org> |Date: Wed Aug 24 17:18:30 2022 -0700 | | genetlink: start to validate reserved header byte this is fixed by adding the proper value to the introduced "resv_start_op" parameter. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernek: use struct_group to wipe ar8216 volatile priv dataChristian Marangi2023-05-22
| | | | | | | | | Instead of reference vlan and do strange subtraction, use the handy struct_group() to create a virtual struct of the same size of the members. This permits to have a more secure memset and fix compilation warning in 6.1 where additional checks are done. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: refresh swconfig_leds to handle new trigger lockingChristian Marangi2023-05-22
| | | | | | | Refresh swconfig_leds source to handle new trigger locking that is now a spinlock. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: refresh IFF_NO_IP_ALIGN ifdef for kernel >= 6.1Christian Marangi2023-05-22
| | | | | | | Kernel 6.1 expanded the priv_flags to long bitmap so update and restore it to priv_flags. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: remove obsolete kernel version switchesAleksander Jan Bajkowski2023-05-20
| | | | | | | This removes unneeded kernel version switches from the targets after kernel 5.10 has been dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: psb6970: drop unused variable in psb6970_config_initAleksander Jan Bajkowski2023-05-12
| | | | | | | | | | | | | | | Drop unused variable in psb6970_config_init. This variable should have been dropped in 0806f8fc80e6 ("lantiq: add Linux 5.10 support as testing kernel"). This fix compilation warning: drivers/net/phy/psb6970.c: In function 'psb6970_config_init': drivers/net/phy/psb6970.c:310:28: warning: unused variable 'dev' [-Wunused-variable] 310 | struct net_device *dev = pdev->attached_dev; | cc1: all warnings being treated as errors Fixes: 0806f8fc80e6 ("lantiq: add Linux 5.10 support as testing kernel") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* generic: fix compilation warning for ar8xxx swconfigAnsuel Smith2022-03-27
| | | | | | | | | There are 2 warning for ar8xxx swconfig. - Fix not used dev variable when ETHERNET_PACKET_MANGLE is not selected - Convert fallthrough comment to compilation macro Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* generic: 5.15: rework hack patchAnsuel Smith2022-03-27
| | | | | | | | Rework hack patch in dir for kernel 5.15. For the specific patch of packet mangeling introduce a new extra_priv_flags as we don't have enough space to add additional flags in priv_flags. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* Move mvswitch 88E6060 driver to the ath25Sergey Ryazanov2021-12-27
| | | | | | | | | | | | | | | | | | | | | | ath25 requires a 88E6060 driver to support boards such as Fonera 2.0g (FON2202). The swconfig based mvswitch driver has not yet been ported to the 5.10 kernel as the only user is the ath25 target while all other targets have been switched to the upstream DSA implementation. Switching ath25 to the DSA implementation is a complex task, since we need either per-board platform data or DTS support. ath25 lacks both of them and builds only a single generic image. So we need to keep the swconfig driver implementation to easly and quickly port ath25 to the 5.10 kernel. Since porting the mvswitch driver to 5.10 as a generic driver is not an option, and since the ath25 is its only user, make mvswitch a target specific driver to be able to port it to the 5.10 kernel as part of the kernel version update of the target. This will allow us quickly migrate to the next kernel version and not delay the next firmware release. Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: export switch_generic_set_link() symbolRafał Miłecki2021-10-07
| | | | | | | | | | | | This fixes: ERROR: "switch_generic_set_link" [drivers/net/phy/b53/b53_common.ko] undefined! At some point all packages for swconfig drivers were dropped and targets were meant to have them built into kernels. It seems b53 (re-)gained its kmod-switch-bcm53xx however and b53 needs to be built as module. Fixes: b2cfed48f626 ("Revert "swconfig: fix Broadcom b53 support"") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "swconfig: fix Broadcom b53 support"Rafał Miłecki2021-10-07
| | | | | | | | | | | | | | | | | | | | This reverts commit 8f9cd1af0f9c325a902dbd0e79e12015372e6bb0. That commit was meant to add a single EXPORT_SYMBOL_GPL() but it actually also added few .of_match_table-s. One commit should handle one thing and should not introduce unrelated changes. Regarding actual changes: 1. EXPORT_SYMBOL_GPL is not required as we don't build swconfig drivers as modules. 2. PHY drivers must not have .of_match_table. That is allowed for MDIO drivers. This could work for some time (although is didn't for me on bcm53xx) but does not with kernel 5.10. It causes a soft lockup and upstream developers confirmed it's an unsupported design. Link: https://lore.kernel.org/netdev/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.com/t/#mf80e472f35ee23f7a75cbf5b1e101a17ab3a64a3 Cc: Tobias Schramm <tobleminer@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: ar8216: remove soft_resetDavid Bauer2021-06-03
| | | | | | | | | | ar8xxx_soft_reset is effectively a NOP function. In the PHY state machine, the availability and result of a soft_reset function makes no difference for the code flow. Thus, we can safely remove this method. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: ar8216: add get_features methodDavid Bauer2021-06-03
| | | | | | | | | | | | | | Modifying PHY capabilities in the probe function broke with upstream commit 92ed2eb7f4b7 ("net: phy: probe the PHY before determining the supported features"). AR8316 switches only support 10/100 Mbit/s link modes because of this change. Provide a get_features method for the PHY driver, so Gigabit link mode will be advertised to link partners again. Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: add Linux 5.10 support as testing kernelMathias Kresin2021-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following changes are made to the Lantiq kernel patches: 0001-MIPS-lantiq-add-pcie-driver.patch The pci header isn't included by the of_pci header any longer 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch Due to the merge of grx390 and ar10 clocks, extend support to grx390 0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch The do_carrier arguments was dropped from phy_link_change. The phylib has always sets the third parameter to true so the flag is always changed anyway. of_get_phy_mode() returns an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored now. So far an error wasn't considered. Print at least an error message if something unexpected happens. The stuck queue is now passed to xrx200_tx_timeout (the timeout handler) but not used so far. 0028-NET-lantiq-various-etop-fixes.patch ioremap has provided non-cached semantics by default since the Linux 2.6 days and was removed with kernel version 5.6. of_get_phy_mode() returns an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored now. So far an error wasn't considered. Print at least an error message if something unexpected happens. 0042-arch-mips-increase-io_space_limit.patch Move IO space extension to laniq specific file Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: b53: update the BCM5365 UID in the fixupDaniel González Cabanelas2021-03-05
| | | | | | | | | | The BCM5365 UID was updated in the driver, but we should also update it in the fixup. Fixes: cbcac4fde8ba ("kernel: b53: update the BCM5365 UID") Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (Ammend commit description, add Fixes tag) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: b53: update the BCM5365 UIDDaniel González Cabanelas2021-02-26
| | | | | | | | | | | | | | BCM63XX internal PHYs and BCM5365 SoC internal switch are both using the same phy_driver->phy_id, causing conflicts and unnecessary probes. E.g the BCM63XX phy internal IRQ is lost on the first probe. The full BCM5365 UID is 0x00406370. Use an additional byte to mask the BCM5365 UID to avoid duplicate driver phy_id's. This will fix the IRQ issue in internal BCM63XX PHYs and avoid more conflicts in the future. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* generic: ar8216: update version switch for of_get_phy_mode fixAdrian Schmutzler2021-02-16
| | | | | | | | | | | | | Kernel has changed the of_get_phy_mode API in commit 0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit warnings"). This is already included in kernel 5.5, so fix the version switch (though this will not actually matter for the versions we support). Similar driver adjustments to account for the API change will probably be necessary to various other local drivers. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* generic: ar8216: fix kernel 5.10 compile errorDavid Bauer2021-02-16
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add linux 5.10 supportFelix Fietkau2021-02-16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove an unused callback from the ip17xx switch driverFelix Fietkau2020-12-05
| | | | | | Also remove the leftover kernel hack that adds support for it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove mvsw61xx swconfig driverDENG Qingfang2020-11-16
| | | | | | | All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA driver, so it can be removed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kernel: ip17xx: use pr_warn instead of pr_warningFelix Fietkau2020-11-13
| | | | | | Fixes build with newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target: remove obsolete kernel version switches for 4.19Adrian Schmutzler2020-10-30
| | | | | | | This removes unneeded kernel version switches from the targets after kernel 4.19 has been dropped. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: rename POWER_ON_STRIP registerSungbo Eo2020-07-25
| | | | | | | | | | AR8327 datasheet[1] calls the register at address 0x0010 "Power-on Strapping Register". As it has nothing to do with "strip", let's rename it to "POWER_ON_STRAP" to make it easier to grasp. [1] https://lafibre.info/images/doc/201106_spec_AR8327.pdf Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: rtl8367b: fix external interface modesINAGAKI Hiroshi2020-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The interface mode number of RGMII_33V is 7 on RTL8367, but it's 9 on RTL8367B. the external interface modes for RTL8367 are follows: - 0, Disabled - 1, RGMII - 2, MII_MAC - 3, MII_PHY - 4, TMII_MAC - 5, TMII_PHY - 6, GMII - 7, RGMII_33V the external interface modes for RTL8367B are follows: - 0, Disabled - 1, RGMII - 2, MII_MAC - 3, MII_PHY - 4, TMII_MAC - 5, TMII_PHY - 6, GMII - 7, RMII_MAC - 8, RMII_PHY - 9, RGMII_33V But the driver in U-Boot of RT-N56U GPL tar blocks using RGMII_33V (9) mode and it seems to be unsupported on RTL8367B, so drop it from switch-case in rtl8367b_extif_set_mode. ref (RTL8367): - TL-WR2453ND v1 ref (RTL8367B): - ASUS RT-N56U - TP-Link Archer C2 v1 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: b53: fix compilation with kernels 5.5+Rafał Miłecki2020-06-05
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: drop outdated kernel version switches in local driversAdrian Schmutzler2020-05-17
| | | | | | | This drops the obsolete version switches for non-supported kernels from local drivers in generic target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* generic: ar8216: fix unknown packet flooding for ar8229/ar8236Chuanhong Guo2020-05-06
| | | | | | | | | | | | ar8229 and ar8236 don't allow unknown unicast/multicast frames and broadcast frames to be flooded to cpu port. This isn't desired behavior for swconfig as we treat it as a standalone switch. Current code doesn't enable unicast frame flooding for ar8229 and uses wrong setup for ar8236. This commit fixes both of them by enabling port 0 flooding for all unknown frames. Fixes: FS#2848 Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: rtl8367b: use id as a bit offset for BYPASS_LINE_RATEINAGAKI Hiroshi2020-04-04
| | | | | | | | | | | | | | | | | In RTL8367B (RTL8367RB/RTL8367R-VB), the driver in GPL tars of the devices with this switch directly uses the ID of external interface as a bit offset. We should use the same way. ref (RTL8367B): - ASUS RT-N56U - TP-Link Archer C2 v1 ref (RTL8367): - TP-Link TL-WR2543ND v1 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: rtl8367b: fix DEBUG register address for extif2INAGAKI Hiroshi2020-04-04
| | | | | | | | RTL8367B_CHIP_DEBUG1_REG (0x1304) is for external interface 1. For external interface 2, use RTL8367B_CHIP_DEBUG2_REG (0x13e2) instead. Fixes: 9801d61c4a ("kernel: rtl8367b: add configuration for extif2") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: rtl8367b: add configuration for extif2Serge Vasilugin2020-03-21
| | | | | | | | | | | | | | | | | | | | | | Both rtl8367b and rtl8367s have two extended interface rtl8367rb: 5 port + 2*RGMII/MII rtl8367s: 5 port + SGMII/HSGMI + RGMII/MII (?)rtl8367sb: 5 port + 2*RGMII/MII These interfaces correspond to EXT1 and EXT2 (ports 6 and 7 respectivly). This patch allow to configure EXT2 in dts-file: rtl8367rb { compatible = "realtek,rtl8367b"; cpu_port = <7>; realtek,extif2 = <1 0 1 1 1 1 1 1 2>; mii-bus = <&mdio0>; phy_id = <29>; }; Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> [fix indent, replace magic value, alter commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: rtl8367b: add definition of debug regChuanhong Guo2020-03-21
| | | | | | | This commit adds definition of DEBUG0 and DEBUG1 registers and replace magic values with proper register modifying. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: make all phy drivers kernel 5.0 compatibleMathias Kresin2020-03-16
| | | | | | | | It adjusts the code to upstream changes from the commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add support for kernel 5.4Koen Vandeputte2020-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: swconfig: make compatible with kernel 5.2Mathias Kresin2020-02-12
| | | | | | | | | | | | | | | | | | | | | Since kernel 5.2 within netlink messages the NLA_F_NESTED nested flag is validated. But swconfig/swlib doesn't set the flag for SWITCH_ATTR_OP_VALUE_PORTS related netlink messages and assigning ports to vlans via swconfig dev switch0 vlan 1 set ports '0 1 2 3 4 6t' Errors put with "Failed to set attribute: Invalid input data or parameter". Relax the validation rules and use the deprecated functions, to use the same level of validation as it was till kernel 5.1. Depending on who has swconfig related netlink messages implemented, there might be more broken tools out there and we should keep backward compatibility if possible. Signed-off-by: Mathias Kresin <dev@kresin.me> Tested-by: Rafał Miłecki <rafal@milecki.pl>
* swconfig: fix Broadcom b53 supportTobias Schramm2020-01-12
| | | | | | | | | This commit fixes a bug in the main swconfig patch where a function needed by the b53 driver is not exported. Additionally it adds OF support to the b53_mdio driver for devicetree- based probing Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* generic ar8xxx: increase VLAN table for AR83x7David Bauer2019-11-30
| | | | | | | | | | | | The Atheros AR8327 and AR8337 have (according to their datasheet) a VLAN table with a maximum of 4096 entries. Currently, there's a hard limit of 128 VLANs, which is the same as for most other Atheros switches. Increase this limit only for the AR83x7 series and modify some shared functions to allow them to work with a variable max VLAN count. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: fix swconfig compilation with kernels 5.2+Rafał Miłecki2019-10-28
| | | | | | | This is related to the upstream kernel change 3b0f31f2b8c9 ("genetlink: make policy common to family"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: ar8216: group MIB counters and use two basic ones only by defaultChuanhong Guo2019-05-20
| | | | | | | | | | | | | | | | | There are too many MIB counters that almost nobody needs since commit d6366ce3665f ("generic: ar8216: mib_work_func: read all port mibs everytime"). In the worker function to poll MIB data, it deals with all ports instead of only one port every time, which introduces too many mdio operations that it becomes a heavy CPU load even on not-emulated MDIO bus. This commit groups MIB counters and enable only TxBytes and RxGoodBytes by default (both of which are necessary to get swconfig led working.) and adds an swconfig attribute to allow enabling all counters if users need them. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add mib_poll_interval switch attributeChuanhong Guo2019-05-20
| | | | | | | | | | | | | | This allows specifying interval of polling MIB counters from userspace and allow completely turning off MIB counter support by setting mib_poll_interval to 0. Since MIB counter polling is a heavy CPU load for GPIO emulated MDIO bus, disable this behavior by default. Those who wants to use swconfig LEDs can enable them with qca,mib-poll-interval dts property or with swconfig command. Fixes: FS#2230 ("kworker spikes 100% cpu every 2 second.") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: b53: add support for kernels 5.0+Rafał Miłecki2019-04-04
| | | | | | | | It adjusts b53 code to upstream changes from the commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: ar8216: introduce qca,mib-poll-interval propertyChuanhong Guo2019-03-24
| | | | | | | | This allows users to specify a shorter mib poll interval so that the swconfig leds could behave normal with current get_port_stats() implementation. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: do a software reset for switch during hw_initChuanhong Guo2019-03-24
| | | | | | | | | | | | | | This applies to ar8216 and ar8236. QCA's newer U-boot will enable the switch mdio master for FE switches which makes phy inaccessible from CPU mdio. (e.g. on TP-Link TL-WR941N v7 Chinese version which uses QCA9558+AR8236.) For these devices PHY probing is broken and mdio device probing is a must. We also need to disable switch mdio master in driver for later PHY initialization. Do a soft reset during hw_init so that mdio master can be disabled and expose PHYs to CPU mdio for later PHY accessing. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: mib_work_func: read all port mibs everytimeChuanhong Guo2019-03-24
| | | | | | | | ar8xxx_mib_capture will update mib counters for all ports. Current code only update one port at a time and the data for other ports are lost. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for get_port_stats()Chuanhong Guo2019-03-24
| | | | | | | | | | | | | | | | | | | | | | | Partially reverts commit eff3549c5883a9abc5dbff00c084cabbcfdf4437. AR7240 and AR9341 have buggy hardware switch LED trigger. The AR7240 one doesn't blink and the blinking of port0/port5 is reversed on AR9341 if we swap PHY0 and PHY4. (Only blinking is reversed, which means LED for PHY0 will lit when PHY0 is link up and will blink when PHY4 has active link and vice versa.) On these two chips a software swconfig LED trigger is required. This commit adds swconfig port stats back but: 1. move checking of mib_t/rxb_id into ar8xxx_chip since we can't distinguish ar7240sw and ar8216 using only chip id. 2. don't update mib counter in get_port_stat. This function is called every 0.01s and this capturing procedure will take up a lot of CPU. We already have a mib_work_func updating mib counters every 2s so return the saved counter instead of fetching new data. The blinking rate will be weird but it should solve the previously mentioned CPU time problem. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Powered by cgit, Themed by Ted Yin.