aboutsummaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx
Commit message (Expand)AuthorAge
* Fix the default negotiation to be 10Mbits HD on some devices (#4224)Florian Fainelli2008-12-12
* move THERMAL symbols into the generic configImre Kaloz2008-11-25
* update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patc...Gabor Juhos2008-11-12
* Build b43, b43legacy and ath9k for kernels >= 2.6.27 from mac80211. Include b...Florian Fainelli2008-11-09
* update to 2.6.25.19, and refresh patchesGabor Juhos2008-11-07
* turn the wrtsl54gs workaround into a more generic fix and reduce the chance o...Felix Fietkau2008-11-02
* fix boot failure on some boardsGabor Juhos2008-10-20
* change the way ./files* and the generic kernel files are applied. ./files now...Felix Fietkau2008-10-18
* Add workaround for eth0/1 PHY on WRTSL54GSPeter Denison2008-10-02
* create a profile for brcm47xx and ixp4xxAndy Boyett2008-09-27
* make b43 the default profileAndy Boyett2008-09-27
* update to 2.6.26.5 and 2.6.25.17Gabor Juhos2008-09-26
* disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable i...Nicolas Thill2008-09-24
* update to 2.6.26.3 and 2.6.25.16Gabor Juhos2008-08-22
* refresh 2.6.23 patchesGabor Juhos2008-08-14
* Now we have b43 working in master mode, include b43 in the profile (#3827)Florian Fainelli2008-08-13
* update to 2.6.25.15 and 2.6.26.2Gabor Juhos2008-08-07
* update to 2.6.25.12Gabor Juhos2008-07-26
* fix compile error (closes #3799)Gabor Juhos2008-07-22
* Update gpiommc to use configfsMichael Büsch2008-07-20
* Disable ubsec ssb by default on WGT634U until it gets fixedFlorian Fainelli2008-07-16
* Include ubsec ssb in the WGT634U profileFlorian Fainelli2008-07-15
* On embedded devices we must not route the interrupts through the PCI core, if...Peter Denison2008-07-08
* update targets to 2.6.25.10Imre Kaloz2008-07-05
* upgrade to 2.6.25.9Imre Kaloz2008-06-26
* upgrade to 2.6.25.7, and refresh patchesGabor Juhos2008-06-17
* Fix TG3 build. Thanks Hauke MehrtensPeter Denison2008-06-16
* upgrade to 2.6.25.6Imre Kaloz2008-06-11
* Update 2.6.25 configPeter Denison2008-06-03
* Build against 2.6.25.4Peter Denison2008-06-03
* Remove obsolete CFE workaround, now proper fix went in r11275Peter Denison2008-05-27
* Add a WL500GPv1 profile (#3395)Florian Fainelli2008-05-22
* Revert last 3 commits made in error. Proper versions will come laterPeter Denison2008-05-20
* Build brcm47xx against 2.6.25.1Peter Denison2008-05-20
* Update generic-2.6 and brcm47xx 2.6.25 configsPeter Denison2008-05-20
* refresh kernel patchesGabor Juhos2008-05-19
* Fix kmap_coherent use on 2.6.25 kernelsPeter Denison2008-05-18
* upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19)Gabor Juhos2008-05-18
* Remove files now present upstream in files-2.6.25 (This is mostly just driver...Peter Denison2008-05-16
* enable proper PCI & USB support detection at config-time by disabling CONFIG_...Nicolas Thill2008-05-09
* fix GENERIC_GPIO supportGabor Juhos2008-05-02
* Disable CONFIG_CONNECTOR in config-2.6.23 - Unused, disabling precludes Kconf...Andy Boyett2008-05-01
* properly disable CONFIG_CRYPTO_HWNicolas Thill2008-04-27
* First step to upgrade of brcm47xx to kernel version 2.6.25Peter Denison2008-04-25
* Fix b44 phyaddr by applying the PHY-address mask. Closes #3712 - Adapted from...Andy Boyett2008-03-23
* linux-2.6: Add a driver to run an MMC or SD card over a GPIO based SPI interf...Michael Büsch2008-03-21
* bcm47xx: Fix warning arch/mips/bcm947xx/irq.c: In function 'pcibios_map_irq':...Michael Büsch2008-03-19
* bcm47xx: Register a GPIODEV platform device to allow GPIO access via /dev/gpioMichael Büsch2008-03-19
* bcm47xx: Fix GPIO data direction output bit assignmentMichael Büsch2008-03-15
* Update cleanups of ssb-gigeMichael Büsch2008-03-13