aboutsummaryrefslogtreecommitdiff
path: root/target/linux/bmips/bcm6368
Commit message (Collapse)AuthorAge
* bmips: drop patches/config for kernel 5.15Álvaro Fernández Rojas2024-01-16
| | | | | | Drop patches/config for kernel 5.15 now that they are not used anymore. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: migrate FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER for 6.1Stefan Kalscheuer2023-06-25
| | | | | | | | | | The flag FORCE_MAX_ZONEORDER was renamed to ARCH_FORCE_MAX_ORDER in Kernel 6.1 [1]. Rename the flag in generic Kconfig and remove it from target configs. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0192445cb2f7ed1cd7a95a0fc8c7645480baba25 Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* bmips: add support for Actiontec R1000HDaniel González Cabanelas2023-06-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with two external antennas. It comes with a coaxial HomePNA port. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 32 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 1x 2.0 - Buttons: 2x, 1 reset - LEDs: 7x - UART: yes The HPNA hardware probably needs a firmware to make the coaxial port work. In the OEM firmware, it's apparently sent with an utility (inhpna) through the ethernet port. Installation via CFE web UI: 1. Connect the UART serial port. 2. Power on the router and press enter at the console prompt to stop the bootloader. 4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: add support for Comtrend WAP-5813nÁlvaro Fernández Rojas2023-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend WAP-5813n is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: miniPCI Broadcom BCM4322 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Comtrend VR-3025unÁlvaro Fernández Rojas2023-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend VR-3025un is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43222 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the antenna. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Netgear EVG2000Daniel González Cabanelas2023-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with two internal antennas integrated in the main PCB. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 16 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 2x 2.0 - Buttons: 2x, 1 reset - LEDs: 10x - FXS: 2x - UART: yes Installation via CFE web UI: 1. Power off the router and make a temporal TX-RX shortcircuit on the serial pins. 2. Power on the router and wait 3 or more seconds 3. Remove the TX-RX shortcircuit 4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: add support for Netgear DGND3700 v1, DGND3800BDaniel González Cabanelas2023-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netgear DGND3700 v1 and DGND3800B are the same device but with different factory firmwares. It's an xDSL wifi router with a slim black shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI detachable card. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 128 MB DDR - NOR Flash: 32 MB parallel (CFE and OS) - NAND flash: 128 MB (empty) - Ethernet LAN: 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM43222 802.11bgn - Wifi 5 GHz: Broadcom BCM43222 802.11abgn - USB: 2x 2.0 - Buttons: 3x, 1 reset - LEDs: 11x - UART: yes Installation via OEM web UI: 1. Open the Netgear administration web interface, by default: http://192.168.0.1 user: admin password: password 2. Look for "upgrade firmware" and proceed 3. Wait some minutes until it finishes Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: add support for Observa VH4032NDaniel González Cabanelas2023-06-09
| | | | | | | | | | | | | | | | | | | | | | | | The Observa VH4032N is an xDSL wifi router with a vertical white casing and two internal antennas connected via UFL. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400MHz - RAM: 128 MB DDR - Flash: 32 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4/5 GHz: onboard Broadcom BCM43222 802.11abgn - USB: 3x 2.0 - Buttons: 2x, 1 reset - LEDs: 8x, blue and red - UART: 1x Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: 6.1: refresh config and add missing symbolsÁlvaro Fernández Rojas2023-05-30
| | | | | | Refresh config for kernel 6.1 and add missing symbols. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: 6.1: copy patches, config from 5.15Álvaro Fernández Rojas2023-05-30
| | | | | | Copy patches and config from 5.15 kernel version. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: switch to generic bcma/ssb fallback SPROMÁlvaro Fernández Rojas2023-04-23
| | | | | | | | Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add subtargets for each SoCÁlvaro Fernández Rojas2023-04-10
BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Powered by cgit, Themed by Ted Yin.