aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
* mt76: update to Git HEAD (2024-01-18)Felix Fietkau2024-01-19
| | | | | | | | | | | | | | 83e3947e2c52 linux-firmware: update firmware for MT7922 WiFi device ddaa8cb6e81a linux-firmware: update firmware for MT7921 WiFi device f83b1601cc10 linux-firmware: update firmware for MT7922 WiFi device 61d334ab0f33 linux-firmware: add firmware for MT7925 a7836e4c8a60 wifi: mt76: disable HW AMSDU when using fixed rate a8571ebbcd95 wifi: mt76: check txs format before getting skb by pid 3d5890e2cab3 wifi: mt76: mt7915: fix error recovery with WED enabled 703c26d01197 wifi: mt76: mt7915: add locking for accessing mapped registers f77188160441 wifi: mt76: mt7915: update mt798x_wmac_adie_patch_7976 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: ACS: Fix typo in bw_40 frequency arrayDavid Bauer2024-01-18
| | | | | | | | | | | [Upstream Backport] The range for the 5 GHz channel 118 was encoded with an incorrect channel number. Fixes: ed8e13decc71 (ACS: Extract bw40/80/160 freqs out of acs_usable_bwXXX_chan()) Signed-off-by: Michael Lee <michael-cy.lee@mediatek.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* bcm27xx-utils: update to latest versionÁlvaro Fernández Rojas2024-01-18
| | | | | | | | | | Fixes build with GCC 13. Disable LTO to fix build with CONFIG_USE_LTO. Changelog: e65f5ec eeptools: eepdump: init type before calling eepio_atom_start Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx-utils: add new packageÁlvaro Fernández Rojas2024-01-18
| | | | | | | | The raspberypi/userland repository has been deprecated and the RPi tools have been moved to the raspberrypi/utils repository. https://github.com/raspberrypi/userland/commit/96a7334ae9d5fc9db7ac92e59852377df63f1848 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* uqmi: update to git HEADDaniel Golle2024-01-16
| | | | | | | c3488b8 uqmi: cancel all requests on SYNC indication reception dfa612e uqmi: improve response detection Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm27xx-gpu-fw: update to latest versionÁlvaro Fernández Rojas2024-01-16
| | | | | | | | | raspberrypi/firmware is about 40G, so getting the full history log isn't an option. There have been multiple improvements and also support for the RPi 5 has been added. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx-userland: update to latest versionMarty Jones2024-01-16
| | | | | | | | | | | | | | | | | | | | | | | | | | This is the last update for bcm27xx-userland as it has been deprecated but funcional up to raspberry pi 5. 96a7334 README: Update to make it clear that most code in this repo is deprecated 3c97f76 userland: dtoverlay: /boot/firmware is a valid path 153a235 Assorted clang static analysis fixes eca070c bcm_host: Update kms/fkms check for pi5 06a7618 dtoverlay: Support bcm2712 as a platform 0489c07 dtoverlay: Add dtoverlay_first/next_subnode a1c7f81 dtoverlay: Support literal assignments of path strings 44a3953 raspivid: Also flush PTS file if flush is enabled cc1ca18 userland: dtoverlay: Use os_prefix if set 9d5250f libfdt: Add null-ptr check for prop-data to resolve clang --analyzer warning 50527c6 mmal: Only include Videocore components if not running on Videocore df245ea tvservice: Update unsupported message to recommend kmsprint de0cfe8 dtoverlay: Fix clang warnings 0182f05 dtoverlay: Fix various compiler warnings 2a6306b dtoverlay: Fix path rebasing and exports d1e92d7 dtoverlay: Add support for string escape sequences b1ee39e gencmd: Add a fallback to mailbox interface if vchiq is not available 54fd97a hello_pi: Fix some build issues Signed-off-by: Marty Jones <mj8263788@gmail.com>
* base-files: functions.sh: prepend() always adds separatorPhilip Prindeville2024-01-15
| | | | | | | | | | It shouldn't gate on the value, since the value will ostensibly always be set; instead it should depend on the variable being prepended to being non-empty. Fixes #14403 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* gettext-full: use autoreconf host fixupAlexander Egorenkov2024-01-15
| | | | | | | | | | To prevent use of host's library path on Void Linux: /usr/lib/libacl.so: file not recognized: file format not recognized collect2: error: ld returned 1 exit status libtool: error: error: relink 'libgettextlib.la' with the above command before installing it Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
* fstools: update to Git HEAD (2024-01-15)Christian Marangi2024-01-15
| | | | | | 325d63d67006 mount_root: fix compilation error for wrong condition Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: add kmod-leds-lp5562 and kmod-leds-lp55xx-commonCheWei Chien2024-01-15
| | | | | | | Add kernel module for lp5562 LED driver. The kmod-leds-lp5562 depends on kmod-leds-lp55xx-common. Signed-off-by: CheWei Chien <chewei.chien@wnc.com.tw>
* ipq807x: fix whitespace usagePaweł Owoc2024-01-15
| | | | | | Replace with tab and remove unused whitespaces Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
* base-files: add support for rootfs mount options from cmdlineChristian Marangi2024-01-15
| | | | | | | | | | | | | | | | | | | Add support for configuring rootfs mount options from cmdline. Rootfs mount options can be passed by declaring in the kernel cmdline as much options as needed prefixed with "rootfs_mount_options." An example usage is with rootfs with F2FS filesystem to enable compress_algorithm to reduce flash wear by compressing the files before writing to flash. Example usage: "... rootfs_mount_options.compress_algorithm=zstd ..." To pass multiple options: "... rootfs_mount_options.compress_algorithm=zstd rootfs_mount_options.noinline_data ..." Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* fstools: update to Git HEAD (2024-01-15)Christian Marangi2024-01-15
| | | | | | | | | | | 97bacb70138a libfstools: query drivers by priority 41e619ed1352 block: recognize /dev/fit* block devices bc3b8cdd3de3 libfstools: add uImage.FIT fitblk driver 846302d09246 libfstools: partname: raise priority to 25 1a5695925ecf mount_root: add support for passing args to mount_root start 1858a492c300 mount_root: permit to pass mount options for rootfs mount Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: add back missing function for updating wpa_supplicant macaddr listFelix Fietkau2024-01-13
| | | | | | | Make the call deferred instead of blocking to avoid deadlock issues Fixes: 3df9322771cc ("hostapd: make ubus calls to wpa_supplicant asynchronous") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix an exception in hostapd.uc on interface add failureFelix Fietkau2024-01-13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mac80211: rework interface setup, fix race condition"Felix Fietkau2024-01-13
| | | | | | | | This reverts commit b7f9742da82fa9b122e8d63e48a9a5c0dec298f2. There are several reports of regressions with this commit. Will be added back once I've figured out and fixed the cause Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rework interface setup, fix race conditionFelix Fietkau2024-01-11
| | | | | | | Only tell netifd about vifs when the setup is complete and hostapd + wpa_supplicant have been notified Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211.sh: fix deadlock on configuring multiple PHYs simultaneouslyFelix Fietkau2024-01-11
| | | | | | | | When hitting a timing window where ubus configuration calls are hitting hostapd and wpa_supplicant simultaneously, they can deadlock waiting for each other. Fix this by using a lock around the ubus calls. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: make ubus calls to wpa_supplicant asynchronousFelix Fietkau2024-01-11
| | | | | | | | This fixes a deadlock issue where depending on the setup order, hostapd and wpa_supplicant could end up waiting for each other Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: added timeouts in qmi.shUwe Niethammer2024-01-10
| | | | | | | | | | Modems which are using qmi do not reply on the 1st sync but they do on subsequent. Sometimes uqmi is hanging - even when using an early dummy access to unlock the modem. To always guarantee a proper initialisation, running or hanging uqmi processes must be stopped before. All uqmi calls have now a timeout option -t to avoid hanging. Signed-off-by: Uwe Niethammer <uwe@dr-niethammer.de>
* uhttpd: handle reload after uhttpd-mod-ubus installation using postinstRafał Miłecki2024-01-10
| | | | | | | | | | | | | | Use postinst script to reload service instead of uci-defaults hack. It's possible thanks to recent base-files change that executes postinst after uci-defaults. This fixes support for uhttpd customizations. It's possible (again) to adjust uhttpd config with custom uci-defaults before it gets started. Cc: Hauke Mehrtens <hauke@hauke-m.de> Fixes: d25d281fd668 ("uhttpd: Reload config after uhttpd-mod-ubus was added") Ref: b799dd3c705d ("base-files: execute package's "postinst" after executing uci-defaults") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: do not emit VHT160 capabilities if channel width is less than 160 MHzFelix Fietkau2024-01-09
| | | | | | Fixes compatibility issues with VHT160 capable clients Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing NULL pointer check on radar notificationFelix Fietkau2024-01-09
| | | | | | Fixes a race condition that can lead to a hostapd crash Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: work around recent macOS linker changeFelix Fietkau2024-01-09
| | | | | | | | | rpath handling seems to be more restrictive now. To deal with this, link the libubox library from STAGING_DIR_HOST to STAGING_DIR_HOSTPKG, so that packages installed to STAGING_DIR_HOSTPKG can pick it up. This mainly affects ucode, but possibly other host builds as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq-wifi: fix PKG_MIRROR_HASHManuel Fombuena2024-01-08
| | | | | | | Incorrect PKG_MIRROR_HASH introduced on #14356 Fixes: 934873f4514b ("ipq-wifi: bump version to 2024-01-06-71f45cff") Signed-off-by: Manuel Fombuena <mfombuena@innovara.co.uk>
* ipq-wifi: bump version to 2024-01-06-71f45cffManuel Fombuena2024-01-08
| | | | | | | | | | | 673662f ipq8074: add Wallys DR8072V01 BDF 7e8b237 ipq40xx: add ZyXEL WSQ50 QCA4019 BDF 831c1bd ipq40xx: add ZyXEL WSQ50 QCA9984 BDF f9ff251 ipq40xx: add ASUS MAP-AC2200 QCA9888 BDF 71f45cf ipq8074: Update MX4200 BDF Signed-off-by: Manuel Fombuena <mfombuena@innovara.co.uk> Reviewed-by: Robert Marko <robimarko@gmail.com>
* mac80211: avoid crashing on invalid band infoDavid Bauer2024-01-07
| | | | | | | | | | | | | | | Frequent crashes have been observed on MT7916 based platforms. While the root of these crashes are currently unknown, they happen when decoding rate information of connected STAs in AP mode. The rate-information is associated with a band which is not available on the PHY. Check for this condition in order to avoid crashing the whole system. This patch should be removed once the roout cause has been found and fixed. Link: https://github.com/freifunk-gluon/gluon/issues/2980 Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: filogic: add support for Xiaomi AX3000TDim Fish2024-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **SoC**: MediaTek MT7981B 2x A53 **Flash**: ESMT F50L1G41LB 128MB **RAM**: NT52B128M16JR-FL 256MB **Ethernet**: 4x 10/100/1000 Mbps **Switch**: MediaTek MT7531AE **WiFi**: MediaTek MT7976C **Buttons**: Reset, Mesh **Power**: DC 12V 1A 1. Get ssh access. Supported stock firmware **1.0.47** ``` curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20set%20ssh_en%3D1%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20commit%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Ased%20-i%20's%2Fchannel%3D.*%2Fchannel%3D%22debug%22%2Fg'%20%2Fetc%2Finit.d%2Fdropbear%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=********/api/misystem/arn_switch" -d "open=1&model=1&level=%0Apasswd%20-d%20root%0A ``` 2. Backup stock partitions ``` nanddump -f /tmp/BL2.bin /dev/mtd1 nanddump -f /tmp/Nvram.bin /dev/mtd2 nanddump -f /tmp/Bdata.bin /dev/mtd3 nanddump -f /tmp/Factory.bin /dev/mtd4 nanddump -f /tmp/FIP.bin /dev/mtd5 nanddump -f /tmp/ubi.bin /dev/mtd8 nanddump -f /tmp/KF.bin /dev/mtd12 ``` Then transfer them to your computer in a safe place. 3. Get firmware information `cat /proc/cmdline` 4. Copy openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi to **/tmp** and flash If **firmware=0** ``` ubiformat /dev/mtd9 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` If **firmware=1** ``` ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` Then reboot your router, it should boot to the OpenWrt initramfs system now. 5. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin` 1. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` `reboot` 2. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 3. Format ubi and create new ubootenv volume ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB ``` 4. *(Optional **-10Mb** free space) Add recovery boot feature.* ``` ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb ``` 5. Flash Openwrt U-Boot ``` mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin BL2 mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip FIP ``` 6. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb` 1. Force flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `sysupgrade -F -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` 2. Format ubi and Nvram ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 mtd erase Nvram ``` 3. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Flash stock images from backup ``` mtd write /tmp/BL2.bin BL2 mtd write /tmp/FIP.bin FIP mtd write /tmp/ubi.bin ubi ``` Then reboot your router, waiting it finished rollback in minutes. `ubiformat /dev/mtd7 -y -f /tmp/ubi.bin` Then reboot your router, waiting it finished rollback in minutes. Signed-off-by: Dim Fish <dimfish@gmail.com>
* kernel: include modinfo for built-in modulesTony Ambardar2024-01-06
| | | | | | | | | | | | | | | | | | Add modules.builtin.modinfo to the kernel package, to support presence testing using module aliases and printing module details with 'modinfo'. With related kmodloader changes this adds ~2 KB to compressed image sizes. root@OpenWrt:/# modinfo unix name: unix filename: (builtin) alias: net-pf-1 license: GPL root@OpenWrt:/# modprobe net-pf-1 && echo SUCCESS || echo FAIL SUCCESS Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: include built-in module listTony Ambardar2024-01-06
| | | | | | | | | | | | | | | | | | | | | | Add modules.builtin to the kernel package for improved handling of loadable and builtin modules. As with other distros, this allows 'modprobe <module>' to consistently return success for both loaded/built-in modules, a useful feature for presence-testing. Given OpenWrt's few built-in modules, this change and related kmodloader support add ~1 KB to the compressed image size. Using sch_fq_codel (builtin) and sch_cake (loadable) for example: root@OpenWrt:/# modprobe sch_fq_codel && echo SUCCESS || echo FAIL SUCCESS root@OpenWrt:/# modprobe sch_cake && echo SUCCESS || echo FAIL SUCCESS root@OpenWrt:/# rmmod sch_fq_codel module is builtin Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq807x: add support for Linksys MX4200 V1 and V2Mohammad Sayful Islam2024-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linksys MX4200 is a 802.11ax Tri-band router/AP. Specifications: * CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz * RAM: 512MB of DDR3 * Storage: 512Mb NAND * Ethernet: 4x1G RJ45 ports (QCA8075) * WLAN: * 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate * 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * LED-s: * RGB system led * Buttons: 1x Soft reset 1x WPS * Power: 12V DC Jack Installation instructions: Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup. Login with your admin password. The default password can be found on a sticker under the device. To enter into the support mode, click on the “CA” link and the bottom of the page. Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button. Click start. Ignore all the prompts and warnings by click “yes” in all the popups. The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device. Then you would need to write openwrt to the other partition for it to work - First Check booted partition fw_printenv -n boot_part - Then install Openwrt to the other partition if booted in slot 1: mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel - If in slot 2: mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel Replace (X) with your model version either 1 or 2 Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* mac80211: add missing newline for "min_tx_power"Rany Hany2024-01-05
| | | | | | | This prevents min_tx_power from functioning properly in some circumstances. Add the missing newline. Signed-off-by: Rany Hany <rany_hany@riseup.net>
* devel/gdb: Update to 14.1Hannu Nyman2024-01-04
| | | | | | | | | | Update the gdb package to 14.1 * mpfr is now required, remove the 'without' and add dependency * remove mpc 'without' that is parsed wrongly, causing "-Lno/lib" * refresh patches Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mpfr: import from packages feedHannu Nyman2024-01-04
| | | | | | | Import mpfr from the packages feed to the main OpenWrt repo, as gdb 14 requires mpfr. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* linux/modules: remove deprecated moduleJohn Audia2024-01-04
| | | | | | | | | Remove upstream deprecated module from our build, see[1] 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit?h=v5.15.145&id=6cd90c01b032f335d18966b2d979eef43eb2cfc1 Suggested-by: Shiji Yang <yangshiji66@qq.com> Signed-off-by: John Audia <therealgraysky@proton.me>
* mac80211: fix a race condition related to enabling fast-xmitFelix Fietkau2024-01-04
| | | | | | | | | | fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnl: update to 3.9.0Nick Hainke2024-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: bdf83151 libnl-3.9.0 release aa7353fd include/linux-private: import 'seg6 local' headers from kernel tree 9466f680 lib: remove unused assignment in nl_addr_parse() acd05d6e route/tc: avoid integer overflow in rtnl_tc_calc_cell_log() daa8efcb xfrm: return -NLE_MISSING_ATTR from xfrmnl_sa_get_auth_params() d8a1ff30 xfrm: fix leaking usertemplate in xfrmnl_sp_parse() 4fcb0757 socket: workaround coverity warning about time_t handling f743c62f github: update Fedora image and version for clang-format f33e8cd6 clang-format: rework container script aea3f9f2 lib: fix signed overflow warning in nl_object_diff() 57e01706 socket: explicitly cast time() to uint32_t 46e8739e src: fix leak in "nl-cls-add" a06c8f76 route/cls: add get/take wrappers for rtnl_act_append() 7912b4f9 route/cls: fix leak in error handling of rtnl_flower_append_action() efd65feb route: fix just introduced use-after-free in rtnl_act_parse() 105a6be1 route: use cleanup macro in rtnl_act_parse() 78246da7 nl-aux-route: add cleanup macro for rtnl_act_put_all() 72762b20 base: add _NL_AUTO_DEFINE_FCN_INDIRECT0() macro a70f789a route: fix memleak in rtnl_act_parse() 65ab16f2 base: don't use static array indices for buffer argument of _nl_inet_ntop() 444e2c04 route/can: implement can_device_stats a4718e67 github: build with "-fexceptions" CFLAGS 2f485cc7 xfrm: refactor error handling in XFRM parsing 01bd8fb0 include: add "nl-aux-xfrm" helpers 49c20efa xfrm: fix crashes in case of ENOMEM 9e7b5c86 xfrm: refactor nl_addr_build() calls in XFRM code dbfd87b1 xfrm: use cleanup attribute for nl_addr in XFRM parsing db424835 xfrm: fix error code for NLE_ENOMEM in xfrmnl_ae_parse() 9c97deff xfrm: fix parsing address in xfrmnl_ae_parse() 8b6dc834 nl-aux-core: add _nl_addr_build() helper 057aac13 nl-base-utils: add _nl_addr_family_to_size() helper 664f8f1b xfrm: clear XFRM_SP_ATTR_TMPL when removing the last template from a policy c4c22d26 xfrm/sp: fix reference counters of sa selector/tmpl addresses 5979fcb0 route/link: add bonding interface options set rtnl apis a735989c build: fix declaring special targets as ".PHONY" 052a97cb Makefile.am: avoid use of non-portable echo arguments 9aab12df python: Use correct decorator syntax in HTBQdisc Signed-off-by: Nick Hainke <vincent@systemli.org>
* libxml2: update to 2.12.3Nick Hainke2024-01-04
| | | | | | | | Release Notes: - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.2 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.3 Signed-off-by: Nick Hainke <vincent@systemli.org>
* netifd: update to Git HEAD (2024-01-04)Felix Fietkau2024-01-04
| | | | | | | 4219e99eeec7 system-linux: fix race condition in netlink socket error handing f01345ec13b9 device: restore cleared flags on device down Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: Add support for D-Link EAGLE PRO AI R32Roland Reinl2024-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | R32 is like the M32 part of the EAGLE PRO AI series from D-Link. Specification: - MT7622BV SoC with 2.4GHz wifi - MT7975AN + MT7915AN for 5GHz - MT7531BE Switch - 512MB RAM - 128 MB flash - 2 LEDs (Status and Internet, both can be either orange or white) - 2 buttons (WPS and Reset) Compared to M32, the R32 has the following differences: - 4 LAN ports instead of 2 - The recory image starts with DLK6E6015001 instaed of DLK6E6010001 - Individual LEDs for power and internet - MAC address is stored at another offset in the ODM partition MAC addresses: - WAN MAC is stored in partition "Odm" at offset 0x81 - LAN (as printed on the device) is WAN MAC + 1 - WLAN MAC (2.4 GHz) is WAN MAC + 2 - WLAN MAC (5GHz) is WAN MAC + 3 Flashing via Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.0 - Press the reset button while powering on the deivce - Keep the reset button pressed until the internet LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Download openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-recovery.bin Flashing via uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-initramfs-kernel.bin. - You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "1. System Load Linux to SDRAM via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to RAM will start. After a few seconds OpenWrt initramfs should start - The initramfs is accessible via 192.168.1.1, change your IP address accordingly (or use multiple IP addresses on your interface) - Create a backup of the Kernel1 partition, this file is required if a revert to stock should be done later - Perform a sysupgrade using openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-squashfs-sysupgrade.bin - Reboot the device. OpenWrt should start from flash now Revert back to stock using the Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.0 - Press the reset button while powering on the deivce - Keep the reset button pressed until the internet LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Flash a decrypted firmware image from D-Link. Decrypting an firmware image is described below. Decrypting a D-Link firmware image: - Download https://github.com/RolandoMagico/firmware-utils/blob/M32/src/m32-firmware-util.c - Compile a binary from the downloaded file, e.g. gcc m32-firmware-util.c -lcrypto -o m32-firmware-util - Run ./m32-firmware-util R32 --DecryptFactoryImage <OriginalFirmware> <OutputFile> - Example for firmware R32A1_FW103B01: ./m32-firmware-util R32 --DecryptFactoryImage R32A1_FW103B01.bin R32A1_FW103B01.decrypted.bin Revert back to stock using uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides the previously created backup of the Kernel1 partition. - You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "2. System Load Linux Kernel then write to Flash via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to FLASH will start. After a few seconds the stock firmware should start again There is also an image openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-tftp.bin which can directly be flashed via U-Boot and TFTP. It can be used if no backup of the Kernel1 partition is reuqired. Flahsing via OEM web interface is currently not possible, the OEM images are encrypted. Creating images is only possible manually at the moment. The support for the M32/R32 already includes support for flashing from the OEM web interface: - The device tree contains both partitions (Kernel1 and Kernel2) with conditions to select the correct one based on the kernel command line - The U-Boot variable "boot_part" is set accordingly during startup to finish the partition swap after flashing from the OEM web interface - OpenWrt sysupgrade flashing always uses the partition where it was initially flashed to (no partition swap) Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
* wolfssl: update to 5.6.6Nick Hainke2024-01-02
| | | | | | | | | | | Release Notes: https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.6-stable Refresh patches: - 100-disable-hardening-check.patch Fixes: CVE-2023-6935 CVE-2023-6936 CVE-2023-6937 Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: filogic: add support ASUS RT-AX59UXavier Franquet2023-12-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (based on support for ASUS RT-AX59U by liushiyou006) SOC: MediaTek MT7986 RAM: 512MB DDR4 FLASH: 128MB SPI-NAND (Winbond W25N01GV) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: MediaTek MT7531 Switch UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Upgrade from AsusWRT to OpenWRT using UART Download the OpenWrt initramfs image. Copy the image to a TFTP server reachable at 192.168.1.70/24. Rename the image to rtax59u.bin. Connect the PC with TFTP server to the RT-AX59U. Set a static ip on the ethernet interface of your PC. (ip address: 192.168.1.70, subnet mask:255.255.255.0) Conect to the serial console, interrupt the autoboot process by pressing '4' when prompted. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.1.1 $ setenv serverip 192.168.1.70 $ tftpboot 0x46000000 rtax59u.bin $ bootm 0x46000000 Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Upgrade from AsusWRT to OpenWRT using WebUI Download transit TRX file from https://drive.google.com/drive/folders/1A20QdjK7Udagu31FSszpWAk8-cGlCwsq Upgrade firmware from WebUI (192.168.50.1) using downloaded TRX file Wait for OpenWRT to boot (192.168.1.1). Upgrade system with sysupgrade image using luci or uploading it through scp and executing sysupgrade command MAC Address for WLAN 5g is not following the same algorithm as in AsusWRT. We have increased by one the WLAN 5g to avoid collisions with other networks from WLAN 2g when bit 28 is already set. : Stock : OpenWrt WLAN 2g (1) : C8:xx:xx:0D:xx:D4 : C8:xx:xx:0D:xx:D4 WLAN 2g (2) : : CA:xx:xx:0D:xx:D4 WLAN 2g (3) : : CE:xx:xx:0D:xx:D4 WLAN 5g (1) : CA:xx:xx:1D:xx:D4 : CA:xx:xx:1D:xx:D5 WLAN 5g (2) : : CE:xx:xx:1D:xx:D5 WLAN 5g (3) : : C2:xx:xx:1D:xx:D5 WLAN 2g (1) : 08:xx:xx:76:xx:BE : 08:xx:xx:76:xx:BE WLAN 2g (2) : : 0A:xx:xx:76:xx:BE WLAN 2g (3) : : 0E:xx:xx:76:xx:BE WLAN 5g (1) : 0A:xx:xx:76:xx:BE : 0A:xx:xx:76:xx:BF WLAN 5g (2) : : 0E:xx:xx:76:xx:BF WLAN 5g (3) : : 02:xx:xx:76:xx:BF Signed-off-by: Xavier Franquet <xavier@franquet.es>
* dropbear: increase default receive window sizeDavid Bauer2023-12-28
| | | | | | | | | | | Increasing the receive window size improves throughout on higher-latency links such as WAN connections. The current default of 24KB caps out at around 500 KB/s. Increasing the receive buffer to 256KB increases the throughput to at least 11 MB/s. Signed-off-by: David Bauer <mail@david-bauer.net>
* package: new package for usb gadget setupChuanhong Guo2023-12-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Setting up usb gadgets using g_* kernel modules are considered a legacy approach, but the usb_gadget configfs is a bit annoying to use directly. The usb_gadget configfs works by creating magic directories and writing to magic files under /sys/kernel/config/usbgadget. This new package is an init script to setup usb_gadget configfs using uci. In the config file, gadget/configuration/function sections create corresponding directories. UCI options are magic files available in the configfs and strings/0x409 directories, grabbed with a 'find' command. UDC option in gadget writes the UDC file under the 'gadget' directory to attach the generated gadget config. It's also possible to apply pre-made config templates under /usr/share/usbgadget. The templates use the same UCI config format, with the 'gadget' entry named 'g1'. Currently, there are templates for CDC-ACM and CDC-NCM gadgets written based on existing g_*.ko module code. Certain SBCs come with only a USB device port (e.g. Raspberry Pi Zero). With this script, it's now possible to perform initial setup on them by adding a default NCM gadget. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: execute package's "postinst" after executing uci-defaultsRafał Miłecki2023-12-27
| | | | | | | | | | | | | | | | Allow "postinst" scripts to perform extra actions after applying all kind of fixups implemented using uci-defaults. This is needed e.g. by uhttpd-mod-ubus which after installation in a running systems needs to: 1. Update uhttpd config using its uci-defaults script 2. Reload uhttpd While this approach makes sense there is a risk it'll blow up some corner case postinst usages. There is only 1 way to find out. Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: add support for Routerich AX3000Mikhail Zhilkin2023-12-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is continuation of work under "mediatek: add support for Routerich AX3000" #13703 by the agreement with PR #13703 original author (Maximilian Weinmann <x1@disroot.org>). All reviews from the previous PR were taken into into account. Routerich AX3000 is a wireless WiFi 6 router. Specification ------------- - SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz - RAM : DDR3 256 MiB (ESMT M15T2G16128A) - Flash : SPI-NAND 128 MiB (ESMT F50L1G41LB) - WLAN : MediaTek MT7976CN dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz : a/n/ac/ax, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE) - USB : 1x 2.0 - UART : through-hole on PCB - [J500] GND, TX, RX, 3.3V (115200n8) - Buttons : Mesh, Reset - LEDs : 1x Power (Blue) 1x WiFi 2.4 GHz (Blue) 1x WiFi 5 GHz (Red) 1x Mesh (Blue) 3x LAN activity (Blue) 1x WAN activity (Blue) 2x WAN no-internet (Red) - Power : 12 VDC, 1.5 A Installation ------------ Flash OpenWrt 'sysupgrade.bin' image using stock firmware web-interface (without keeping settings). Return to stock --------------- Install stock firmware image (without keeping settings) using OpenWrt sysupgrade method. Recovery -------- Connect uart, use u-boot menu to flash stock firmware image or boot OpenWrt initramfs image. MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 24:0f:5e:xx:xx:b4 | label | | LAN | 24:0f:5e:xx:xx:b5 | label+1 | | WLAN 2g | 24:0f:5e:xx:xx:b6 | label+2 | | WLAN 5g | 24:0f:5e:xx:xx:b7 | label+3 | +---------+-------------------+-----------+ The WLAN 2g MAC was found in 'Factory', 0x4 Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* mediatek: add support for Zbtlink ZBT-Z8103AXIan Oderon2023-12-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SoC: MediaTek MT7981B RAM: 256MiB Flash: SPI-NAND 128 MiB Switch: 1 WAN, 3 LAN (Gigabit) Buttons: Reset, Mesh Power: DC 12V 1A WiFi: MT7976CN UART: 115200n8 UART Layout: VCC-RX-TX-GND No. of Antennas: 6 Note: Upon opening the router, only 5 antennas were connected to the mainboard. Led Layout: Power-Mesh-5gwifi-WAN-LAN3-LAN2-LAN1-2gWiFi Buttons: Reset-Mesh Installation: A. Through OpenWrt Dashboard: If your router comes with OpenWrt preinstalled (modified by the seller), you can easily upgrade by going to the dashboard (192.168.1.1) and then navigate to System -> Backup/Flash firmware, then flash the firmware B. Through TFTP Standard installation via UART: 1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin). 2. Power on the router. Make sure that you can access your router via UART. 3. Restart the router then repeatedly press ctrl + c to skip default boot. 4. Type > bootmenu 5. Press '2' to select upgrade firmware 6. Press 'Y' on 'Run image after upgrading?' 7. Press '0' and hit 'enter' to select TFTP client (default) 8. Fill the U-Boot's IP address and TFTP server's IP address. 9. Finally, enter the 'firmware' filename. Signed-off-by: Ian Oderon <ianoderon@gmail.com>
* mac80211: fix flush during station removalOldřich Jedlička2023-12-24
| | | | | | | | | | This fixes WARN_ONs when using AP_VLANs after station removal. The flush call passed AP_VLAN vif to driver, but because these vifs are virtual and not registered with drivers, we need to translate to the correct AP vif first. Fixes: openwrt#12420 Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* arm-trusted-firmware-sunxi: Update to 2.10Tianling Shen2023-12-20
| | | | | | | | Runtime tested on NanoPi R1S H5 and Orange Pi Zero3. Changelog: https://trustedfirmware-a.readthedocs.io/en/v2.10/change-log.html Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Powered by cgit, Themed by Ted Yin.