aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
...
* build: hide kmod-zram config unless enabledRani Hod2023-10-29
| | | | | | | | | Currently the zram default compressor choice is displayed whether or not zram is activated. Since the default choice is lzo-rle, this adds a false dependency on kmod-lib-lzo. With this patch, the choice options appear only when activating zram. Signed-off-by: Rani Hod <rani.hod@gmail.com>
* ramips: add support for ZyXEL LTE5398-M904Milan Krstic2023-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZyXEL LTE5398-M904 is a dual band 802.11ac indoor LTE/3G CPE with an FXS port. Specifications: * SoC: Mediatek MT7621AT * RAM: 256 MB * Flash: 128MB NAND (MX30LF1G18AC) * WiFi: MediaTek MT7603 2.4G + MediaTek MT7615 5G * Switch: 2 GbE ports MT7530 * LTE/3G: Quectel EG18-EA LTE-A Cat. 18 * SIM: 1 micro-SIM card slot * Buttons: Reset, WPS * LEDs: power (G/B), internet (G), LTE (R/G/Orange), WiFi (G), voice (G) * VoIP: 1 FXS RJ11 port * Power: 12V, 2A UART serial console: 57600,8N1 Unpopulated header J5: [o] GND [ ] key - no pin [o] RX [o] TX [o] 3.3V Vcc Installation: * Log in as root using ssh to 192.168.1.1 * scp OpenWrt initramfs-recovery.bin image to root@192.168.1.1:/tmp/ * Prepare bootloader config by running: nvram setro uboot DebugFlag 0x1 nvram setro uboot CheckBypass 0 nvram commit * Run "mtd_write -w write /tmp/initramfs-recovery.bin Kernel" and reboot * Wait for OpenWrt to boot and ssh to root@192.168.1.1 * Run sysupgrade with OpenWrt squashfs-sysupgrade.bin image For mode details about flashing see: 2449a63208 (ramips: mt7621: Add support for ZyXEL NR7101, 2021-04-19) Unsupported: * FXS/Voice Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
* mac80211: compile kconf with host gccZeyu Dong2023-10-28
| | | | | | | | | | Fix the building issue setting CC to KERNEL_CC in kernel.mk. The kernel backports by default uses CC to compile kconf. A new patch is added to mac80211 to compile kconf with host gcc. Signed-off-by: Zeyu Dong <dzy201415@gmail.com> [ refresh patches ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* odhcpd: Bump to latest commitsKevin Darbyshire-Bryant2023-10-28
| | | | | | | d8118f6 config: make sure timer is not on the timeouts list before freeing 4bbc6e7 add hostsfile output in addition to statefile Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* uboot-mediatek: Sync phy-mode for Xiaomi Redmi Router AX6000Furong Xu2023-10-28
| | | | | | | | | | | Commit 572ea6807053 ("uboot-mediatek: add patches for MT7988 and builds for RFB") renamed HSGMII to 2500basex, but forgot to update the dts of Redmi Router AX6000, makes the network unusable. This patch makes the network usable again. Fixes: #13724 Fixes: 572ea6807053 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Furong Xu <xfr@outlook.com>
* qualcommax: ipq807x: add support for Netgear WAX630Kristian Skramstad2023-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ``` Specifications: * CPU: Qualcomm IPQ8074A, SoC Version: 2.0, Quad core 1651 MHz * RAM: 1 GiB of DDR3 466 MHz * Flash: NAND 512 MiB (Winbond W29N04GZ) * 6 RGB LEDs: Power, LAN1, LAN2, 2.4GHz, 5GHz H and 5GHz L * UART: One 4-pin populated header next to the heatsink and a chip. GND RXD TXD, beginning from the external antennas. 115200n8. Lan: * One 100/1000/2.5GBASE-T Gigabit Ethernet 802.3bt/at * One 100/1000 Gigabit Ethernet Wlan: * 4x4 in 2.4GHz : 802.11b/g/n/ax * 4x4 in 5.0GHz L: 802.11a/n/ac/ax * 4x4 in 5.0GHz H: 802.11a/n/ac/ax * OFDM and OFDMA * Bidir and MU-MIMO * Internal antenna 2.86/4.41/4.98 dBi (2.4GHz/5GHz L/5GHz H) Power: * 802.3bt/at 30.1W * DC 12V/3.5A Mounting: Wall and ceiling ``` ``` 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect to the console on the AP, and connect the LAN port to your LAN 3. Stop auto boot to get to U-boot shell, interrupt the autoboot process by pressing '0' when prompted 4. Set active_fw in env 4. Set active_fw in env # setenv active_fw 1 5. Transfer the initramfs image with TFTP # setenv serverip 192.168.1.10 (IP of TFTP server host) # setenv ipaddr 192.168.1.1 (IP used by the router for getting the image, must be in the same subnet as the TFTP host) # tftpboot openwrt-qualcommax-ipq807x-netgear_wax630-initramfs-uImage.itb 6. Reboot and load the image # bootm 7. SCP factory image to the AP # scp openwrt-qualcommax-ipq807x-netgear_wax630-squashfs-factory.ubi root@192.168.1.1:/tmp/ 8. Connect to device using SSH (use the LAN port) 9. Flash squashfs-factory.ubi from within the initramfs instance of OpenWRT Before you flash, please check your mtd partitions where mtdX is the right mtd rootfs partition. # cat /proc/mtd (To check MTD partitions) # ubiformat /dev/mtd18 -y -f /tmp/openwrt-qualcommax-ipq807x-netgear_wax630-squashfs-factory.ubi 10. Set active_fw to 0 # /usr/sbin/fw_setenv active_fw 0 11. Reboot the AP and your done # reboot ``` Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Kristian Skramstad <kristian+github@83.no>
* ipq-wifi: update to version 2023-10-12Kristian Skramstad2023-10-28
| | | | | | | | | Contains the following update: 52a1c29 ipq8074: add Netgear WAX630 Board file for Netgear WAX630. Extracted from stock (WAX630_BDF.bin) firmware and repacked. e7701b8 ipq8074: update RegDB in new submitted BDF cd04ab7 qcn9074: update RegDB in new submitted BDF Signed-off-by: Kristian Skramstad <kristian+github@83.no>
* mediatek: add CMCC RAX3000M supportTianling Shen2023-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 64GB eMMC or 128 MB SPI-NAND RAM: 512MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Mesh Power: DC 12V 1A - UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | GND TX VCC RX | <= | | ----------------- | -------------------------- Gain SSH access: 1. Login into web interface, and download the configuration. 2. Enter fakeroot, decompress the configuration: tar -zxf cfg_export_config_file.conf 3. Edit 'etc/config/dropbear', set 'enable' to '1'. 4. Edit 'etc/shadow', update (remove) root password: 'root::19523:0:99999:7:::' 5. Repack 'etc' directory: tar -zcf cfg_export_config_file.conf etc/ * If you find an error about 'etc/wireless/mediatek/DBDC_card0.dat', just ignore it. 6. Upload new configuration via web interface, now you can SSH to RAX3000M. Check stroage type: Check the label on the back of the device: "CH EC CMIIT ID: xxxx" is eMMC version "CH CMIIT ID: xxxx" is NAND version eMMC Flash instructions: 1. SSH to RAX3000M, and backup everything, especially 'factory' part. ('data' partition can be ignored, it's useless.) 2. Write new GPT table: dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-gpt.bin of=/dev/mmcblk0 bs=512 seek=0 count=34 conv=fsync 3. Erase and write new BL2: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=/dev/zero of=/dev/mmcblk0boot0 bs=512 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-preloader.bin of=/dev/mmcblk0boot0 bs=512 conv=fsync 4. Erase and write new FIP: dd if=/dev/zero of=/dev/mmcblk0 bs=512 seek=13312 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-bl31-uboot.fip of=/dev/mmcblk0 bs=512 seek=13312 conv=fsync 5. Set static IP on your PC: IP 192.168.1.254, GW 192.168.1.1 6. Serve OpenWrt initramfs image using TFTP server. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After OpenWrt has booted, perform sysupgrade. 9. Additionally, if you want to have eMMC recovery boot feature: (Don't worry! You will always have TFTP recovery boot feature.) dd if=openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb of=/dev/mmcblk0p4 bs=512 conv=fsync NAND Flash instructions: 1. SSH to RAX3000M, and backup everything, especially 'Factory' part. 2. Erase and write new BL2: mtd erase BL2 mtd write openwrt-mediatek-filogic-cmcc_rax3000m-nand-preloader.bin BL2 3. Erase and write new FIP: mtd erase FIP mtd write openwrt-mediatek-filogic-cmcc_rax3000m-nand-bl31-uboot.fip FIP 4. Set static IP on your PC: IP 192.168.1.254, GW 192.168.1.1 5. Serve OpenWrt initramfs image using TFTP server. 6. Cut off the power and re-engage, wait for TFTP recovery to complete. 7. After OpenWrt has booted, erase UBI volumes: ubidetach -p /dev/mtd0 ubiformat -y /dev/mtd0 ubiattach -p /dev/mtd0 8. Create new ubootenv volumes: ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB 9. Additionally, if you want to have NAND recovery boot feature: (Don't worry! You will always have TFTP recovery boot feature.) ubimkvol /dev/ubi0 -n 2 -N recovery -s 20MiB ubiupdatevol /dev/ubi0_2 openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb 10. Perform sysupgrade. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-mediatek: add support for CMCC RAX3000MTianling Shen2023-10-28
| | | | | | | The OEM U-Boot uses dual boot and signature verification which does not support by OpenWrt. So add a custom U-Boot build for OpenWrt. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* arm-trusted-firmware-mediatek: add emmc/spim-nand ddr4 build for mt7981Tianling Shen2023-10-28
| | | | | | They will be used on CMCC RAX3000M. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ucode: fix build on macosFelix Fietkau2023-10-28
| | | | | | | Remove ABI version, since its format is not accepted by the linker. Enable rpath to avoid clash with system libraries Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ucode: update to latest Git HEADJo-Philipp Wich2023-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Introduces signal handling facilities - Fixes potentially incorrect object equality tests - Introduces debug library - Introduces log library - ABI version bump due to changed VM structure layout - Revised packaging Changelog: 07c0317 jsdoc: switch to own custom theme 6ca08b0 jsdoc: properly handle indented documentation blocks 2a67f22 lib: add/improve documentation for require(), loadfile(), loadstring() 9993ccb uci: fix potential memory leaks in `configs()` f56394f ci: re-trigger workflows on pull request pushes 1c18993 lib: various documentation fixes d25dcb1 uci: add module documentation 4a8ece2 docs: use CSS and local JavaScript fixups to improve formatting 8f21cfa lib: introduce log library 8a3aefe build: auto-enable module depending on present libraries 6a01adc build: convert CMakeLists.txt into lowercase 8700665 ci: don't skip pull request workflows for `master` branch 0184d23 include: fix execvpe compat function on macOS 8b23884 uloop: rename environ variable to avoid clashing with system macro on macOS 7c209d7 types: ensure double serializatiion with decimal places d150425 rtnl: update the link attr TODOs d394174 rtnl: add IFLA_TARGET_NETNSID for operating in other namespaces 1227733 lib: fix documented return value for `splice()` c9982de docs: add struct module documentation 7dde493 docs: add missing headline to debug module documentation 8f852ea types: improve comparison reliability of binary strings 6940c28 lib: introduce debug library be07107 treewide: consolidate platform specific code in platform.c 2593270 uloop: interrupt on VM signals 97a5292 lib: add `signal()` stdlib function 1dbbb6a main: enable signal dispatching in the standalone cli interpreter 1623245 types: treat signal handler array as GC root 29b1c0d vm: introduce basic signal handling infrastructure 093684d fs: explicitly compare isatty() result 4f4f38f types: don't rely on implicit type conversion in ucv_compare() 4bee0ef docs: disable GitHub Jekyll post processing 5efb7a0 docs: further rework 33bc7bf docs: fix markup quirks 9d5e420 docs: add information about memory management and operator precedence f1190ef docs: various improvements f0cc841 fs: use `fseeko()` and `ftello()` cba0c3c fs: complete function documentation coverage f9260f7 github: drop superfluous CNAME file c85bc74 Create CNAME 5309294 lib: add JSDoc documentation b0f2f90 fs: add JSDoc documentation fe086da math: add JSDoc documentation 70f9348 docs: add initial JSDoc infrastructure 24f1a56 source: fix source offset accounting 9df9160 lexer: don't count EOF token as newline b9d8f06 ci: switch to official openwrt/gh-action-sdk Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: usb-audio remove Kconfig USB_AUDIOLiangbin Lian2023-10-26
| | | | | | | | CONFIG_USB_AUDIO is a "USB Audio Gadget" driver, not a usb device driver CONFIG_USB_AUDIO is "USB Audio support" before linux 2.6 Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
* kernel: Enable hwmon for nvmeLuca Barbato2023-10-26
| | | | | | | | | Expose the temperature sensors as hwmon, it improves the overall user experience since on tiny boards the nvme can become a substantial source of heat. Signed-off-by: Luca Barbato <lu_zero@gentoo.org> Reviewed-by: Robert Marko <robimarko@gmail.com>
* openssl: update to 3.0.12Hauke Mehrtens2023-10-26
| | | | | | | Major changes between OpenSSL 3.0.11 and OpenSSL 3.0.12 [24 Oct 2023] * Mitigate incorrect resize handling for symmetric cipher keys and IVs. (CVE-2023-5363) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uqmi: update to latest HEADDavid Bauer2023-10-25
| | | | | | | | | c8c9f10 uim: fix help formatting aac0776 uqmi: add APN profile commands ffc5eea uim: support SIM card power-up/down d6c963d uim: add application state to SIM status Signed-off-by: David Bauer <mail@david-bauer.net>
* mtd-utils: update to 2.1.6Nick Hainke2023-10-25
| | | | | | | Release Notes: https://lists.infradead.org/pipermail/linux-mtd/2023-August/100922.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* ixp4xx: Add a ixp4xx hardware crypto kernel moduleLinus Walleij2023-10-25
| | | | | | | | The IXP4xx crypto module must be loaded after the rootfs is up as it depends on loading some NPE microcode from the file system. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* firmware: Resurrect the ixp4xx microcode packageLinus Walleij2023-10-25
| | | | | | | | | | | | The firmware package for the IXP4xx microcode was deleted but the source files are still in the file cache so we can easily resurrect it. The firmware either supports ethernet (the most common) or WAN (less common), image targets select the firmware they want depending on usecase. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: netdevices: Package AMD PHYLinus Walleij2023-10-25
| | | | | | | This adds a package for the AMD and Altima PHY, found in some odd devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* base-files: functions.sh: Add prepend() homologue to append()Philip Prindeville2023-10-23
| | | | | | | | | | | | | Sometimes it's useful to be able to prepend to a variable as well, such as when dealing with domain names, e.g. prepend fdqn "$subdomain" "." will result in: fqdn="$subdomain.$fqdn" Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* uboot-mediatek: fix global pll clock override on mtk_spimNicolò Veronese2023-10-22
| | | | | | | | | | | | With patch 101-03-spi-mtk_spim-get-spi-clk-rate-only-once.patch a new system to calculate the SPI clocks has been added. Unfortunately, the do_div macro overrides the global priv->pll_clk_rate field. This will cause to have a reduced clock rate on each subsequent SPI call. Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu> Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
* libnl: add support for cliKoen Vandeputte2023-10-22
| | | | | | | | | | Some packages (like wavemon >= 0.9.4) depend on libnl-cli. Add support for this part of the lib. libnl-cli itself depends on libnl-genl and libnl-nf. On MIPS, this component adds 81kB. Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com> (punctuation correction and reorganisation of commit message) Signed-off-by: Nick Hainke <vincent@systemli.org>
* bcm53xx: Linksys EA9200 nvram and 02_network fixesRani Hod2023-10-22
| | | | | | | | | | 1) clear nvram partialboots upon successful boot This behavior is already defined for EA9500; enabled for EA9200 too. 2) fix MAC address in board.d/02_network Use the correct nvram variable to derive lan/wan MAC address. Signed-off-by: Rani Hod <rani.hod@gmail.com>
* uboot-mvebu: armada 388 clearfog: support additional ddr configurationsJosua Mayer2023-10-22
| | | | | | | | | Fixes Issue #13632. Patches as submitted in v1 to u-boot mailinglist: https://lists.denx.de/pipermail/u-boot/2023-October/533148.html Signed-off-by: Josua Mayer <josua@solid-run.com>
* kernel: fix missing regmap-mmio dependency for rtc-r7301Christian Marangi2023-10-20
| | | | | | | Add missing regmap-mmio dependency for rtc-r7301 to fix packaging error. Fixes: f2bc4c1f1588 ("kernel: Add kmod-rtc-r7301") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* toolchain: link ldd when using external toolchainArien Judge2023-10-20
| | | | | | | | When using an external toolchain, ldd is not linked into the rootfs. This causes subsequent upgrades to fail with 'Failed to exec upgraded'. This patch adds the symlink when using an external toolchain and musl. Signed-off-by: Arien Judge <arienjudge@outlook.com>
* uboot-mediatek: fix typo in bootmenu for GL-MT6000Jianhui Zhao2023-10-20
| | | | | | Fixes: fe10f97 ("filogic: add support for GL.iNet GL-MT6000") Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* treewide: make use of new toolchain defineChristian Marangi2023-10-20
| | | | | | | | | | Make use of new toolchain define. TOOLCHAIN_DIR should be used only for toolchain related packages and for everything else TOOLCHAIN_ROOT_DIR and other define should be used instead. Switch to new entry where possible. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* treewide: disable QUILT refresh for unsupported packagesChristian Marangi2023-10-20
| | | | | | | | | Some packages won't ever have something to patch as they normally install files or are meta-packages. For these special packages, disable QUILT refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* dnsmasq: add support for RA option 31Rahul Thakur2023-10-20
| | | | | | | | | | | | | The option 31 in the RA specifies the DNS search list, the support to configure this via UCI is missing in case dnsmasq-dhcpv6 is used. This commit uses the uci option domain (same as is done by odhcpd) to read and pass the DNS search list to dnsmasq, which is then used by RA. Hence, with this commit, we are able to configure DNS search list for the RA messages via the uci config when dnsmsaq-dhcpv6 is used. Signed-off-by: Rahul Thakur <rahul.thakur@iopsys.eu>
* nftables: update to 1.0.9Nick Hainke2023-10-20
| | | | | | | ChangeLog: https://www.netfilter.org/projects/nftables/files/changes-nftables-1.0.9.txt Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: Add kmod-rtc-r7301Linus Walleij2023-10-20
| | | | | | | | | To support the IXP42x platforms we need a kernel module for the Epson R7301 RTC so we can load it as an optional module. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Robert Marko <robimarko@gmail.com>
* kernel: Add kmod-rtc-x1205Linus Walleij2023-10-20
| | | | | | | | To support the IXP42x platforms we need a kernel module for the X1205 RTC so we can load it as an optional module. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Robert Marko <robimarko@gmail.com>
* kernel: crypto: armeb build rules for lib-chacha20Linus Walleij2023-10-20
| | | | | | | | | The lib-chacha20 library is missing build rules for big endian ARM, and since IXP4xx is big endian ARM we need those rules to build for IXP4xx. Suggested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* boot/apex: Restore the APEX boot loaderLinus Walleij2023-10-20
| | | | | | | | | | | | | | | | | | This is a partial revert of the deletion of the IXP4xx target: we restore the APEX boot loader so we can use it for the NSLU2 and related targets. The APEX upstream is as dead as it gets so I have applied OpenWrts old patches on top of the never released v1.6.10 version and forked it into an OpenWrt variant on GitHub. If the upstream comes back alive I will happily switch over to it. The file refers to the external GitHub, I suppose when integrating this patch the file should be copied to OpenWrts file repository and the file link changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* netifd: update to latest git HEADChristian Marangi2023-10-20
| | | | | | 5590a80e2566 config: fix incompatible with jshn network-device entry Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* base-files: fix wrong ucidef_set_network_device_mac network-device entryMichael 'ASAP' Weinrich2023-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | The ucidef_set_network_device_* functions in uci-defaults.sh disagree on whether to use "network-device" or "network_device" in board.json. With the additional caveat that jshn will translate hyphens (-) into underscores (_). This casues problems in netifd which expected "network_device" causing boards which depend on assigning MACs in board.json via uci-defaults.sh (or jshn in general) to fail. This commit addresses the issue by using network_device in uci-defaults.sh. The bug was uncovered in the forums here: https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/2596 This was exposed by commit 4ebba8a05d09 ("realtek: add support for HPE 1920-8g-poe+") where the board_config_load call from 03_gpio introduced the key normalization by jshn. Fixes: 9290539ca9c7 ("base-files: allow setting device and bridge macs") Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Michael 'ASAP' Weinrich <michael@a5ap.net> [ improve commit title, description and fix wrong Tested-by tag ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* umdns: update to the latest versionFelix Fietkau2023-10-19
| | | | | | | | | | | | 479c7f8676d9 cache: make record/hostname lookup case-insensitive 26c97a5a50bf ubus: add a browse flag for suppressing cached ip addresses c286c51a9bd9 Fix AVL tree traversal in cache_record_find and cache_host_is_known 4035fe42df58 interface: use a global socket instead of per-interface ones c63d465698c7 cache: dump hostname target from srv records b42b22152d73 use hostname from SRV record to look up IP addresses d45c443aa1e6 ubus: add array flag support for the hosts method Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gmp: update to 6.3Nick Hainke2023-10-17
| | | | | | | Release Notes: https://gmplib.org/gmp6.3 Signed-off-by: Nick Hainke <vincent@systemli.org>
* zlib: update to 1.3Nick Hainke2023-10-17
| | | | | | | | | | | | | | | | | | | | | | Changes in 1.3 (18 Aug 2023) - Remove K&R function definitions and zlib2ansi - Fix bug in deflateBound() for level 0 and memLevel 9 - Fix bug when gzungetc() is used immediately after gzopen() - Fix bug when using gzflush() with a very small buffer - Fix crash when gzsetparams() attempted for transparent write - Fix test/example.c to work with FORCE_STORED - Rewrite of zran in examples (see zran.c version history) - Fix minizip to allow it to open an empty zip file - Fix reading disk number start on zip64 files in minizip - Fix logic error in minizip argument processing - Add minizip testing to Makefile - Read multiple bytes instead of byte-by-byte in minizip unzip.c - Add memory sanitizer to configure (--memory) - Various portability improvements - Various documentation improvements - Various spelling and typo corrections Signed-off-by: Nick Hainke <vincent@systemli.org>
* binutils: update to 2.41Nick Hainke2023-10-17
| | | | | | | Release Notes: https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00009.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: rt2x00: improve EEPROM load patchesChristian Marangi2023-10-16
| | | | | | | | | | | | | | Improve EEPROME load patches. Reorganize and rework them. The current patch are bugged and with the case of MTD loading, leaks and never free the EEPROM read values. Also add support for loading EEPROM using NVMEM cells. As a cleanup, change the binding to swap EEPROM read from mtd to ralink,eeprom-swap and generilize it. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mbedtls: Update to version 2.28.5Hauke Mehrtens2023-10-14
| | | | | | | This fixes some minor security problems. Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/mbedtls-2.28.5 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: ath11k: sync with ath-nextRobert Marko2023-10-14
| | | | | | | | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. All of the changes are various bugfixes, there is no new major feature. Notable bugfixes are: * WCN6855 board name fixes * One MSI vector booting is working again This is rather important for most of the older platforms. * DFS CAC state in virtual interfaces was fixed * TX power during CAC reporting Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: backport upstream DFS CAC time exportRobert Marko2023-10-14
| | | | | | | DFS CAC time export is required for backport of a ath11k fix so lets backport the required cfg80211 upstream commit as well. Signed-off-by: Robert Marko <robimarko@gmail.com>
* iproute2: update to 6.5.0Nick Hainke2023-10-14
| | | | | | | Release Notes: https://lore.kernel.org/netdev/20230906093918.394a1b1d@hermes.local/T/ Signed-off-by: Nick Hainke <vincent@systemli.org>
* ethtool: update to 6.5Nick Hainke2023-10-14
| | | | | | | Release Notes: https://lore.kernel.org/netdev/20230912223336.zywfpavr3ln3trp3@lion.mk-sys.cz/T/ Signed-off-by: Nick Hainke <vincent@systemli.org>
* strace: update to 6.5Nick Hainke2023-10-14
| | | | | | | Release Notes: https://github.com/strace/strace/releases/tag/v6.5 Signed-off-by: Nick Hainke <vincent@systemli.org>
* libnl: update to 3.8.0Nick Hainke2023-10-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: 6b2533c0 libnl-3.8.0 release 1558bd62 build: replace old "NOTE" in configure output and add summary f66383a4 build: avoid aclocal warning about missing "m4" directory e4402a4c build: run `autoupdate` for AM_PROG_LIBTOOL 5761b6af build: add "-Wno-portability" to AC_INIT_AUTOMAKE() 661f10a1 license: fix/adjust license for "src/nl-cls-add.c" c8fcb412 license: fix/adjust license for "src/nl-addr-{add,delete,list}.c" e3e6fd6d tests: use thread-safe localtime_r() instead of localtime() f520471c lib/xfrm: use thread-safe gmtime_r() instead of gmtime() be5add72 tests: avoid srandom()/random() in favor of _nltst_rand_u32() 40578a62 lib: use getprotobyname_r(), getprotobynumber_r() if available 8ee8b05f lib: fix error handling in nl_str2ip_proto() 09f03f29 tests: check nl_str2ip_proto() 74bffbf6 route: fix documentation comment for nl_nh_group_info 59f8db0d clang-format: add "-l" alias for option in "tools/clang-format.sh" 935cc90a clang-format: ignore reformatting commit in ".git-blame-ignore-revs" 53da4712 clang-format: reformat files with new format 65c43bfe clang-format: update ".clang-format" from linux kernel 4c39a2ce include: use <linux/$file> instead of <linux-private/linux/$file> a1e9fb3d include/linux: add all linux headers that we use d37ffe15 include/linux: update all linux headers 1af767a8 include: add missing "extern "C"" specifier to public headers e0a5d12b all: drop "extern "C"" from internal code d9a1e0ce build: add "check-local-build-headers" test target to build public headers 02b87012 build: add a "check-local" build target f9413915 include: fix headers "include/netlink/route/{netconf.h,route/qdisc/red.h}" to be self-contained 680df173 idiag: "fix" license for "idiag-socket-details" tool 2f210d9a github: test build on alpine:latest for musl dcc4c0a5 Revert "gitignore: ignore patch files" 39106309 github: add test for linking with mold and fail on unknown versions f475c3b2 route/nh: drop not implemented "nh" API from headers 4c681e77 build: fix exporting symbol rtnl_link_info_ops_get 260c9575 include: don't explicitly include headers from "nl-default.h" 98c1e696 tests: cleanup include of netlink headers 42bec462 build: cleanup default include list in Makefile.am 4c1a119a include: include private linux headers with explicit path ca063725 python: add make target for python build 25c90193 python: drop unused "python/netlink/fixes.h" 3f3da7fd gitignore: ignore python build artifacts 61ef5609 gitignore: ignore generated doc files 298c5dc6 include: drop "netlink-private/netlink.h" and move declarations 862eed54 all: cleanup includes and use "nm-default.h" 2b3cd741 include: add "nl-default.h" header 8952ce6f build: move "lib/defs.h" to "include/config.h" 1010776d include: split and drop "netlink-private/types.h" d1d57846 include: rename "nl-shared-core" to "nl-priv-dynamic-core" fc91c4f8 include: rename "nl-hidden-route" to "nl-priv-dynamic-route" 9bb6f770 include: rename "nl-intern-route" to "nl-priv-static-route" b5195db9 genl: rename private header "nl-priv-genl.h" to "nl-genl.h" 0eacf658 include: make "netlink/route/link/{inet,inet6}.h" self-contained ad014ad1 route/tc: avoid unalinged access in rtnl_tc_msg_parse() 05bd6366 add support for TC action statistics 776fc5a6 lib: move "include/netlink-private/object-api" to include/nl-shared-core fad34560 lib: move "include/netlink-private/cache-api" to include/nl-shared-core ed2be537 route: move "include/netlink-private/route/link/sriov.h" to lib/route/link-sriov.h 97f61eda lib: move "include/netlink-private/socket.h" to lib/nl-core.h 96e1cc5b route: move "include/netlink-private/route/nexthop-encap.h" to lib/route 391e03d3 route: merge "include/netlink-private/tc.h" to lib/route/tc-api.h 7fc4f5b3 route: move rtnl_tc_build_rate_table() to "tc-api.h" cf41e14d route: move "include/netlink-private/route/tc-api.h" to lib/route db810cfb route: move hidden symbols from "include/netlink-private/route/tc-api.h" ff08e618 build: don't add lib/route to include directory for all libs eb8da16d include: move "include/netlink-private/route/link/api.h" to lib/route 8b2074aa include: move "include/netlink-private/route/utils.h" to nl-intern-route fd470c06 include: move "include/netlink-private/route/mpls.h" to "lib/mpls.h" 78056ad2 genl: add comment about wrongly exported symbol genl_resolve_id() befc4ab4 include: move "include/netlink-private/genl.h" to "lib/genl/nl-priv-genl.h" f6c26127 nl-aux: add "include/nl-aux-{core,route}" headers 2da8481b base: move "netlink-private/utils.h" to "base/nl-base-utils.h" d3e9b513 include/utils: move nl-auto base defines to "utils.h" 543b9f8f clang-format: reformat "include/netlink-private/nl-auto.h" aa565460 route: cleanup ATTR_DIFF() macros beba5a18 cli: add nl-nh-list utility 780d06ae route: add nh type 1b6433d9 neigh: add support of NHID attribute e0140c5f include: import kernel headers "linux/{neighbour,nexthop,rtnetlink}.h" eef06744 utils: add static-assert for signedness of arguments of _NL_CMP_DIRECT() macro 679c4c51 cli: use <netlink-private/utils.h> in cli and _nl_{init,exit} a9c5de52 lib: use _nl_{init,exit} instead of __{init,exit} 102f9bd2 include/private: add _nl_init/_nl_exit macros 6782678e include/private: drop unused __deprecated macro a0535a58 all: use "_nl_packed" macro instead of "__attribute__((packed))" 8c9f98cf all: rework ATTR_DIFF() macros to not generate attribute names ca34ad52 lib: handle negative and zero size in nla_memcpy() 859b89dc include: drop now unused min()/max()/min_t()/max_t() macros 2e0ae977 all: use _NL_{MIN,MAX}() macros 57c451fa utils: add various helpers to "include/netlink-private/utils.h" a9a9dcea style: format "include/netlink-private/utils.h" with clang-format 590e8a61 tools: improve failure message with "tools/clang-format.sh -n" 06dc5ae0 github: fix format checking with clang-format 7738f239 route/trivial: sort entries in "libnl-route-3.sym" asciibetically fc805c56 route/bond: Add support for link_info for bond 6af26981 lib: accept NULL argument in nla_nest_cancel() for robustness e9662091 macsec: Drop offload capability validation check 35a68109 github: update flake8 linter to not explicitly select checks 9a266405 python: add ".flake8" file for configuring "flake8" e6b934a5 python: fix flake8 warnings E712 2cea738b python: fix flake8 warnings E711 d561096c python: fix flake8 warnings E302 29b06d0f python: fix flake8 warnings E741 4dc1f498 python: fix flake8 warnings F841 f4875c69 python: fix flake8 warnings W605 9a3d91df python: fix flake8 warnings F401 6baf2339 clang-format: add "tools/clang-format-container.sh" script ee2876e3 github: add test for checking clang-format style 45c7aae3 clang-format: add "tools/clang-format.sh" script 02e0fd3f github: check python-black code formatting in github actions 2dd53895 build: add ".git-blame-ignore-revs" file for "blame.ignoreRevsFile" git config 3c753e3c python: reformat all Python files with python-black 298ee58e python add "pyproject.toml" for configuring black a0e4b7f9 github: skip Python flake8 test with clang build c4240c0b github: run "Build Release" test also with clang 143cee1d bridge: fix bridge info parsing 96bbe55c test-cache-mngr: Flush output after object dumps cf5dcbcd test-cache-mngr: Add option to print timestamps bd570952 test-cache-mngr: Add an option to iterate over all supported address families bf80da90 test-cache-mngr: Add dump interval options 80febeea test-cache-mngr: Add an option to control which oo_dump function is used 6519a917 route/link: prevent segfault in af_request_type() a68260f8 github: fix installing python dependencies via pip 39c04bc7 build: drop redundant "autogen.sh" call from "tools/build_release.sh" d411b88d build: change proper working directory in "doc/autogen.sh" 2fa73ce0 build: ensure "autogen.sh" scripts fail on error fc786296 gitignore: ignore "*~" files 4c4e614b docs: rtnl_link_put() 'releases' instead of 'returns' 336b15dc include/linux: update copy of kernel header "linux/ipv6.h" e2cacc26 route/link: improve handling of IFLA_INET6_CONF ec8c493c route/link: remove rtnl_link_inet6_set_conf() API e790f8ad route/link: various fixes for rtnl_link_inet6_get_conf() API d83c6d54 route/link: add accessor API for IPv6 DEVCONF 9167504d bridge: drop unnecessary goto in bridge_info_parse() 984d6e93 bridge: don't normalize the u8 argument in rtnl_link_bridge_set_vlan_filtering() to boolean 3662a5da bridge: expose rtnl_link_bridge_get_vlan_protocol() in host byte order 5a1ef219 bridge: fix parsing vlan-protocol in bridge_info_parse() ad1c2927 bridge: minor cleanups in "bridge_info.c" 1c74725a bridge: use SPDX license identifiers in bridge_info files 26ca549d bridge: reformat bridge_info file with clang-format 08dc5d9c bridge: extend libnl with options needed for VLAN aware forwarding 7391a38e bridge: Add support for link_info of a bridge 1f1e8385 route/vlan: drop unnecessary "else" in vlan_put_attrs() 2bc30e57 route/vlan: fix error handling in 'lib/route/link/vlan.c' 8273d6ce build: add comments to linker version scripts about the version tags 6ac7a812 doc: fix typo 07d274ab doc: fix typo 0461a425 attr: reject zero length addresses 8d40d9eb route: construct all-zero addresses for default route destination 25d42a4f addr: allow constructing all-zero addresses 0c0aee82 addr: create an all-zero addresses when parsing "any" or "default" Signed-off-by: Nick Hainke <vincent@systemli.org>
Powered by cgit, Themed by Ted Yin.