diff options
| author | Milan Krstic <milan.krstic@gmail.com> | 2023-09-29 15:26:47 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-10-29 18:51:11 +0100 |
| commit | 17465fc77ec0dbe40310548ee16352b09e2712aa (patch) | |
| tree | 239f66efc4b9d937b528d4c78cf16ba1494a396b /package | |
| parent | da52c6f50e6088d543ce9d0287b30817bdafaa8e (diff) | |
ramips: add support for ZyXEL LTE5398-M904
ZyXEL LTE5398-M904 is a dual band 802.11ac indoor LTE/3G CPE with an FXS
port.
Specifications:
* SoC: Mediatek MT7621AT
* RAM: 256 MB
* Flash: 128MB NAND (MX30LF1G18AC)
* WiFi: MediaTek MT7603 2.4G + MediaTek MT7615 5G
* Switch: 2 GbE ports MT7530
* LTE/3G: Quectel EG18-EA LTE-A Cat. 18
* SIM: 1 micro-SIM card slot
* Buttons: Reset, WPS
* LEDs: power (G/B), internet (G), LTE (R/G/Orange), WiFi (G), voice (G)
* VoIP: 1 FXS RJ11 port
* Power: 12V, 2A
UART serial console:
57600,8N1
Unpopulated header J5:
[o] GND
[ ] key - no pin
[o] RX
[o] TX
[o] 3.3V Vcc
Installation:
* Log in as root using ssh to 192.168.1.1
* scp OpenWrt initramfs-recovery.bin image to root@192.168.1.1:/tmp/
* Prepare bootloader config by running:
nvram setro uboot DebugFlag 0x1
nvram setro uboot CheckBypass 0
nvram commit
* Run "mtd_write -w write /tmp/initramfs-recovery.bin Kernel" and reboot
* Wait for OpenWrt to boot and ssh to root@192.168.1.1
* Run sysupgrade with OpenWrt squashfs-sysupgrade.bin image
For mode details about flashing see:
2449a63208 (ramips: mt7621: Add support for ZyXEL NR7101, 2021-04-19)
Unsupported:
* FXS/Voice
Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
Diffstat (limited to 'package')
| -rw-r--r-- | package/boot/uboot-envtools/files/ramips | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index a04c0616e5..49d6c9d67f 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -127,6 +127,7 @@ xiaomi,redmi-router-ac2100) zyxel,lte3301-plus) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x80000" ;; +zyxel,lte5398-m904|\ zyxel,nr7101) idx="$(find_mtd_index Config)" [ -n "$idx" ] && \ |