aboutsummaryrefslogtreecommitdiff
path: root/package/firmware
Commit message (Collapse)AuthorAge
* ipq-wifi: correct PKG_MIRROR_HASHRobert Marko2024-04-27
| | | | | | | | It seems that somehow a wrong hash has been used for ipq-wifi, so refresh it. Fixes: f10d55df9e0a ("ipq-wifi: update to Git HEAD (2024-04-26)") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq-wifi: update to Git HEAD (2024-04-26)Christian Marangi2024-04-26
| | | | | | | | fab9e29f6b92 ipq6018: update regdb in TPLink EAP610-Outdoor BDF 6d02b65fadf3 ipq8074: update RegDB in new submitted BDF 644ba9ea2e66 ipq6018: update RegDB in new submitted BDF Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq807x: add Spectrum SAX1V1KConnor Yoon2024-04-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Spectrum SAX1V1K is a AX WIFI router with 3 1G and 1 2.5G ports. The router is provided to Spectrum customers. It is OEM of Askey RT5010W https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923 It continues the original work by @MeisterLone to get this device supported. Specifications: ``` • CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz • RAM: 2048MB of DDR3 • Storage: 1024MB eMMC • Ethernet: 3x 1G RJ45 ports (QCA8075) + 1 2.5G Port (QCA8081) • WLAN: • 2.4GHz: Qualcomm QCN5024 4x4 802.11b/g/n/ax 1174 Mbps PHY rate • 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate • LED: 1 gpio-controlled dual color led (blue/red) • Buttons: 1x reset • Power: 12V DC jack ``` Notes: ``` • This commit adds only single partition support, that means sysupgrade is upgrading the current rootfs partition. • Installation can be done by serial connection only. • A poulated serial header is onboard https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923/6 • RX/TX is working, u-boot bootwait is active, secure boot is enabled. ``` Installation Instructions: **Most part of the installation is performed from an initramfs image.** Boot initramfs : Using serial connection 1. Boot up the device and wait till it displays "VERIFY_IB: Success. verify IB ok" 2. Once that message appears, login with username 'root' password serial number of your router in uppercase. 3. Use vi to paste the 'open.sh' script from @MeisterLone github on your device https://github.com/MeisterLone/Askey-RT5010W-D187-REV6/blob/master/Patch/open.sh 4. chmod 755 open.sh 5. ./open.sh 6. Set your ip to 192.168.0.1 7. Run a TFTP server and host the initramfs image on the TFTP server and name it "recovery.img" 8. Reboot device. On boot it will try TFTP. Install OpenWrt from initramfs image: 1. Use SCP (or other way) to transfer OpenWrt factory image 2. Connect to device using SSH (on a LAN port) 3. Flash firmware: sysupgrade # sysupgrade -n -v /tmp/openwrt_sysupgrade.bin 4. Set U-boot env variable: bootcmd # fw_setenv bootcmd "run fix_uboot; run setup_and_boot" 5. Reboot the device # reboot 6. Once device is booted, residue of previous firmware will prevent openwrt to work properly. Factory Reset is MUST required # Once serial console is displaying to login, hold reset button for 10 sec 7. Now everything should be operational. Note: this PR adds only single partition support, that means sysupgrade is upgrading the current rootfs partition Signed-off-by: Connor Yoon <j_connor@taliaent.com>
* ipq807x: add support for Zbtlink ZBT-Z800AXChukun Pan2024-04-17
| | | | | | | | | | | | | | | | | | | Hardware specifications: SoC: Qualcomm IPQ8072A RAM: 1GB of DDR4 600MHz Flash1: Winbond W25Q64DW 8MB Flash2: MX30UF2G28AD 256MB WiFi1: QCN5024 2.4GHz AX 4x4 WiFi2: QCN5054 5GHz AX 4x4 Ethernet: 5x 1G RJ45 port USB: 2x USB 3.0 (1x M.2) Button: Reset, WPS Flash instructions: Upload factory.bin in stock firmware's upgrade page, do not preserve settings. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ipq-wifi: update to version 2024-04-16Chukun Pan2024-04-17
| | | | | | | | | | | Contains following updates: * ipq8074: add Spectrum SAX1V1K BDF * ipq8074: add Zbtlink ZBT-Z800AX BDF * ipq8074: update regdb in Spectrum SAX1V1K BDF * ipq6018: add Linksys MR7350 BDF Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* treewide: package: update missed hashes after switch to ZSTDRobert Marko2024-04-07
| | | | | | | | With the switch to ZSTD for git clone packaging, hashes have changed so fixup remaining package hashes that were missed in the inital update. Fixes: b3c1c57 ("treewide: update PKG_MIRROR_HASH to zst") Signed-off-by: Robert Marko <robimarko@gmail.com>
* treewide: update PKG_MIRROR_HASH to zstPaul Spooren2024-04-06
| | | | | | | When using zst instead of xz, the hash changes. This commit fixes the hash for packages and tools in core. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ipq-wifi: fixup hashRobert Marko2024-04-04
| | | | | | | It seems that somehow a wrong hash has slipped past PR CI again. Fixes: 9ef4f7f9194c ("qualcommax: ipq60xx: add yuncore fap650 support") Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq60xx: add yuncore fap650 supportIsaev Ruslan2024-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Yuncore FAP650 device. Specifications: - Qualcomm IPQ6018+QCA8075+QCN5022+QCN5052 - 512 MB of RAM (DDR3) - 8 MB of serial flash (SPI NOR) - 128 MB of parallel flash (NAND) - 2x2 2.4 GHz WiFi (IPQ6010) - 2x2 5 GHz WiFi (IPQ6010) - 2x 2dBi 2.4G MIMO antenna - 2x 3dBi 5.8G MIMO antenna - 5x 1 Gbps Ethernet (QCA8075) - POE: 48V (IEEE 802.3af) - power: 12V (~1.5A) - 1x passthru port (rj45 - rj45) - 1x cisco rj45 console port - size: 160mm*86mm*29mm BACKUP YOUR STOCK FIRMWARE: ``` export device=fap650 mkdir -p /tmp/fw_dump_$device cd /tmp/fw_dump_$device dmesg > dmesg_$device.log dtc -I fs /sys/firmware/devicetree/base > $device.dts cat /proc/device-tree/model > model cat /proc/mtd > proc_mtd while read p; do mtd_dev=$(echo $p | cut -d: -f1) echo $mtd_dev dd if=/dev/$mtd_dev of=$mtd_dev done < proc_mtd md5sum * > md5sum.log tar -cvzf ../$device.tar.gz . export sum=$(md5sum /tmp/$device.tar.gz | cut -d' ' -f1) mv ../$device.tar.gz /tmp/${device}_${sum}.tar.gz echo fw backup saved to: /tmp/${device}_${sum}.tar.gz ``` Upload your backup via tftp to the safe place. INSTALLATION: 1. stock firmware web ui Rename factory.bin fw image file to factory.ubin. Flash this image like ordinary stock fw upgrade. 2. stock firmware telnet method Enter telnet cli (login: root, password: 476t*_f0%g09y) and upload factory.bin fw image and rename it to factory.ubin `cd /tmp && wget <your_web_server_ip>/factory.ubin` `sysupgrade factory.ubin 3. initramfs method Put imitramfs image to your TFTP server and rename it for example to fap650.initram Enable serial console and enter to the u-boot cli. Exec these commands: `tftpboot <your_tftp_server_ip>:fap650.initram` `dhcp` When downloading is finished: `bootm` After booting the device, you need to upload to the device factory.ubi fw image. ``` cd /tmp && wget <your_web_server_ip>/factory.ubi` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f factory.ubi ubiformat /dev/${rootfs_1} -y -f factory.ubi reboot ``` 4. u-boot factory.ubi image method Put factory.ubi to your TFTP server Enter u-boot cli and exec these commands: `tftpboot <your_tftp_server_ip>:factory.ubi` `dhcp` After downloading is finished: `flash rootfs` `flash rootfs_1` `reset` STOCK FIRMWARE RECOVERY: Boot initramfs image. Upload your rootfs mtd partition to the device using scp or download it from the device using wget. Enter device ssh cli and exec: ``` cd /tmp && wget <your_web_server_ip>/rootfs_mtd` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f /tmp/rootfs_mtd ubiformat /dev/${rootfs_1} -y -f /tmp/rootfs_mtd reboot ``` Signed-off-by: Isaev Ruslan <legale.legale@gmail.com>
* linux-firmware: add missing LICENSE_FILES infoFlorian Eckert2024-03-29
| | | | | | | Where it is clear which lincense the firmware package has, the missing information are added. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* linux-firmware: add LICENSE_FILES and LICENSE file handlingFlorian Eckert2024-03-29
| | | | | | | | | | | The firmware blobs have all different licenses from the different manufacturers of the binary blobs. This information is contained in the upstream 'linux-firmware' repositroy. This commit extends the package handling so that this information can be added as an additional argument during packages generation. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* treewide: update PKG_MIRROR_HASH after APK version schemaPaul Spooren2024-03-25
| | | | | | | | | | With the change in version schema the downloaded files changed, too, mostly the hash is now prefixed with a tilde `~` instead of a dash `-`. Since each downloaded archive contains folder with the same name as the archive, the checksum changed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* linux-firmware: package Intel AX201 firmwarePetr Štetiar2024-03-24
| | | | | | | | | | | | | | Alexander reported following: iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000 iwlwifi 0000:00:14.3: PCI dev a0f0/0074, rev=0x351, rfid=0x10a100 iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-77.ucode failed with error -2 It seems, that as of the current date, the highest firmware API version supported by Linux 6.8-rc7 is still 77. Closes: #14771 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* treewide: use APK compatible version schemaPaul Spooren2024-03-22
| | | | | | | | | | | | | | | | | Different from OPKG, APK uses a deterministic version schema which chips the version into chunks and compares them individually. This enforces a certain schema which was previously entirely flexible. - Releases are added at the very and end prefixed with an `r` like `1.2.3-r3`. - Hashes are prefixed with a `~` like `1.2.3~abc123`. - Dates become semantic versions, like `2024.04.01` - Extra tags are possible like `_git`, `_alpha` and more. For full details see the APK test list: https://gitlab.alpinelinux.org/alpine/apk-tools/-/blob/master/test/version.data Signed-off-by: Paul Spooren <mail@aparcar.org>
* wireless-regdb: add missing license informationFlorian Eckert2024-03-21
| | | | | | Add the missing license information PKG_LICENSE and PKG_LICENSE_FILES. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ath11k-firmware: update IPQ6018 to 2.5.0.1-03982Dirk Buchwalder2024-03-19
| | | | | | | | That new version seems to work more stable including mesh. On version 2.4.0.1-01746 rproc was immediately crashing if mesh was active. Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
* linux-firmware: Update Intel wifi firmwareHauke Mehrtens2024-03-18
| | | | | | | Update Intel wifi firmware to most recent versions supported by the iwlwifi driver from kernel 6.6. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath11k-firmware: update IPQ8074 and QCN9074 to 2.9.0.1-01977Robert Marko2024-03-15
| | | | | | | | | After a long time QCA has pushed an updated release of 2.9.0.1 firmware for IPQ8074 and QCN9074, so lets update to 2.9.0.1-01977. Sadly, still nothing new for IPQ6018. Signed-off-by: Robert Marko <robimarko@gmail.com>
* firmware: intel-microcode: update to 20240312Christian Lamparter2024-03-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian changelog: intel-microcode (3.20240312.1) unstable; urgency=medium * New upstream microcode datafile 20240312 (closes: #1066108) - Mitigations for INTEL-SA-INTEL-SA-00972 (CVE-2023-39368): Protection mechanism failure of bus lock regulator for some Intel Processors may allow an unauthenticated user to potentially enable denial of service via network access. - Mitigations for INTEL-SA-INTEL-SA-00982 (CVE-2023-38575): Non-transparent sharing of return predictor targets between contexts in some Intel Processors may allow an authorized user to potentially enable information disclosure via local access. Affects SGX as well. - Mitigations for INTEL-SA-INTEL-SA-00898 (CVE-2023-28746), aka RFDS: Information exposure through microarchitectural state after transient execution from some register files for some Intel Atom Processors and E-cores of Intel Core Processors may allow an authenticated user to potentially enable information disclosure via local access. Enhances VERW instruction to clear stale register buffers. Affects SGX as well. Requires kernel update to be effective. - Mitigations for INTEL-SA-INTEL-SA-00960 (CVE-2023-22655), aka TECRA: Protection mechanism failure in some 3rd and 4th Generation Intel Xeon Processors when using Intel SGX or Intel TDX may allow a privileged user to potentially enable escalation of privilege via local access. NOTE: effective only when loaded by firmware. Allows SMM firmware to attack SGX/TDX. - Mitigations for INTEL-SA-INTEL-SA-01045 (CVE-2023-43490): Incorrect calculation in microcode keying mechanism for some Intel Xeon D Processors with Intel SGX may allow a privileged user to potentially enable information disclosure via local access. * Fixes for other unspecified functional issues on many processors * Updated microcodes: sig 0x00050653, pf_mask 0x97, 2023-07-28, rev 0x1000191, size 36864 sig 0x00050656, pf_mask 0xbf, 2023-07-28, rev 0x4003605, size 38912 sig 0x00050657, pf_mask 0xbf, 2023-07-28, rev 0x5003605, size 37888 sig 0x0005065b, pf_mask 0xbf, 2023-08-03, rev 0x7002802, size 30720 sig 0x00050665, pf_mask 0x10, 2023-08-03, rev 0xe000015, size 23552 sig 0x000506f1, pf_mask 0x01, 2023-10-05, rev 0x003e, size 11264 sig 0x000606a6, pf_mask 0x87, 2023-09-14, rev 0xd0003d1, size 307200 sig 0x000606c1, pf_mask 0x10, 2023-12-05, rev 0x1000290, size 299008 sig 0x000706a1, pf_mask 0x01, 2023-08-25, rev 0x0040, size 76800 sig 0x000706a8, pf_mask 0x01, 2023-08-25, rev 0x0024, size 76800 sig 0x000706e5, pf_mask 0x80, 2023-09-14, rev 0x00c4, size 114688 sig 0x000806c1, pf_mask 0x80, 2023-09-13, rev 0x00b6, size 111616 sig 0x000806c2, pf_mask 0xc2, 2023-09-13, rev 0x0036, size 98304 sig 0x000806d1, pf_mask 0xc2, 2023-09-13, rev 0x0050, size 104448 sig 0x000806ec, pf_mask 0x94, 2023-07-16, rev 0x00fa, size 106496 sig 0x000806f8, pf_mask 0x87, 2024-01-03, rev 0x2b000590, size 579584 sig 0x000806f7, pf_mask 0x87, 2024-01-03, rev 0x2b000590 sig 0x000806f6, pf_mask 0x87, 2024-01-03, rev 0x2b000590 sig 0x000806f5, pf_mask 0x87, 2024-01-03, rev 0x2b000590 sig 0x000806f4, pf_mask 0x87, 2024-01-03, rev 0x2b000590 sig 0x00090661, pf_mask 0x01, 2023-09-26, rev 0x0019, size 20480 sig 0x00090672, pf_mask 0x07, 2023-09-19, rev 0x0034, size 224256 sig 0x00090675, pf_mask 0x07, 2023-09-19, rev 0x0034 sig 0x000b06f2, pf_mask 0x07, 2023-09-19, rev 0x0034 sig 0x000b06f5, pf_mask 0x07, 2023-09-19, rev 0x0034 sig 0x000906a3, pf_mask 0x80, 2023-09-19, rev 0x0432, size 222208 sig 0x000906a4, pf_mask 0x80, 2023-09-19, rev 0x0432 sig 0x000906c0, pf_mask 0x01, 2023-09-26, rev 0x24000026, size 20480 sig 0x000906e9, pf_mask 0x2a, 2023-09-28, rev 0x00f8, size 108544 sig 0x000906ea, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 105472 sig 0x000906ec, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 106496 sig 0x000906ed, pf_mask 0x22, 2023-07-27, rev 0x00fc, size 106496 sig 0x000a0652, pf_mask 0x20, 2023-07-16, rev 0x00fa, size 97280 sig 0x000a0653, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280 sig 0x000a0655, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280 sig 0x000a0660, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 97280 sig 0x000a0661, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 96256 sig 0x000a0671, pf_mask 0x02, 2023-09-14, rev 0x005e, size 108544 sig 0x000b0671, pf_mask 0x32, 2023-12-14, rev 0x0122, size 215040 sig 0x000b06a2, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160 sig 0x000b06a3, pf_mask 0xe0, 2023-12-07, rev 0x4121 sig 0x000b06e0, pf_mask 0x11, 2023-09-25, rev 0x0015, size 138240 * New microcodes: sig 0x000a06a4, pf_mask 0xe6, 2024-01-03, rev 0x001c, size 136192 sig 0x000b06a8, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160 sig 0x000c06f2, pf_mask 0x87, 2023-11-20, rev 0x21000200, size 549888 sig 0x000c06f1, pf_mask 0x87, 2023-11-20, rev 0x21000200 * source: update symlinks to reflect id of the latest release, 20240312 * changelog, debian/changelog: fix typos -- Henrique de Moraes Holschuh <hmh@debian.org> Tue, 12 Mar 2024 20:28:17 -0300 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: add firmware package for Realtek RTL8188FUShiji Yang2024-03-09
| | | | | | | Realtek RTL8188F is an 802.11n 1x1 USB Wi-Fi adapter. It has been supported by the upstream rtl8xxxu driver since Linux 6.2 kernel. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* firmware: intel-microcode: update to 20231114Christian Lamparter2024-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian changelog: intel-microcode (3.20231114.1) unstable; urgency=medium * New upstream microcode datafile 20231114 (closes: #1055962) Mitigations for "reptar", INTEL-SA-00950 (CVE-2023-23583) Sequence of processor instructions leads to unexpected behavior for some Intel(R) Processors, may allow an authenticated user to potentially enable escalation of privilege and/or information disclosure and/or denial of service via local access. Note: "retvar" on 4th gen Xeon Scalable (sig 0x806f8 pfm 0x87), 12th gen Core mobile (sig 0x906a4 pfm 0x80), 13th gen Core desktop (sig 0xb0671 pfm 0x01) were already mitigated by a previous microcode update. * Fixes for unspecified functional issues * Updated microcodes: sig 0x000606a6, pf_mask 0x87, 2023-09-01, rev 0xd0003b9, size 299008 sig 0x000606c1, pf_mask 0x10, 2023-09-08, rev 0x1000268, size 290816 sig 0x000706e5, pf_mask 0x80, 2023-09-03, rev 0x00c2, size 113664 sig 0x000806c1, pf_mask 0x80, 2023-09-07, rev 0x00b4, size 111616 sig 0x000806c2, pf_mask 0xc2, 2023-09-07, rev 0x0034, size 98304 sig 0x000806d1, pf_mask 0xc2, 2023-09-07, rev 0x004e, size 104448 sig 0x000806f8, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0, size 572416 sig 0x000806f8, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0 sig 0x000806f7, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0 sig 0x000806f6, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0 sig 0x000806f5, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0 sig 0x000806f4, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0 sig 0x000806f8, pf_mask 0x10, 2023-06-26, rev 0x2c000290, size 605184 sig 0x000806f8, pf_mask 0x10, 2023-06-26, rev 0x2c000290 sig 0x000806f6, pf_mask 0x10, 2023-06-26, rev 0x2c000290 sig 0x000806f5, pf_mask 0x10, 2023-06-26, rev 0x2c000290 sig 0x000806f4, pf_mask 0x10, 2023-06-26, rev 0x2c000290 sig 0x00090672, pf_mask 0x07, 2023-06-07, rev 0x0032, size 222208 sig 0x00090672, pf_mask 0x07, 2023-06-07, rev 0x0032 sig 0x00090675, pf_mask 0x07, 2023-06-07, rev 0x0032 sig 0x000b06f2, pf_mask 0x07, 2023-06-07, rev 0x0032 sig 0x000b06f5, pf_mask 0x07, 2023-06-07, rev 0x0032 sig 0x000906a3, pf_mask 0x80, 2023-06-07, rev 0x0430, size 220160 sig 0x000906a3, pf_mask 0x80, 2023-06-07, rev 0x0430 sig 0x000906a4, pf_mask 0x80, 2023-06-07, rev 0x0430 sig 0x000906a4, pf_mask 0x40, 2023-05-05, rev 0x0005, size 117760 sig 0x000a0671, pf_mask 0x02, 2023-09-03, rev 0x005d, size 104448 sig 0x000b0671, pf_mask 0x32, 2023-08-29, rev 0x011d, size 210944 sig 0x000b06a2, pf_mask 0xe0, 2023-08-30, rev 0x411c, size 216064 sig 0x000b06a2, pf_mask 0xe0, 2023-08-30, rev 0x411c sig 0x000b06a3, pf_mask 0xe0, 2023-08-30, rev 0x411c sig 0x000b06e0, pf_mask 0x11, 2023-06-26, rev 0x0012, size 136192 * Updated 2023-08-08 changelog entry: Mitigations for "retvar" on a few processors, refer to the 2023-11-14 entry for details. This information was disclosed in 2023-11-14. * source: update symlinks to reflect id of the latest release, 20231114 -- Henrique de Moraes Holschuh <hmh@debian.org> Thu, 16 Nov 2023 08:09:43 -0300 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* Revert "ipq-wifi: fix upstream board-2.bin ZTE M289F snafu"Christian Lamparter2024-03-09
| | | | | | | This reverts commit 75505c5ec724b9b961dcb411bac1d4b9aede3e1d. The issue has been fixed upstream. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: Update to version 20240220Hauke Mehrtens2024-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the following firmware files: airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.DSP.bin airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.dm.bin amdgpu-firmware (Many files) ar3k-firmware/lib/firmware/qca/hpnv21.bin ar3k-firmware/lib/firmware/qca/hpnv21g.bin ath10k-board-qca4019/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin ath10k-board-qca9888/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin ath10k-firmware-qca6174/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin ath11k-firmware-wcn6750/lib/firmware/ath11k/WCN6750/hw1.0/board-2.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/amss.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/board-2.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/amss.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin ibt-firmware/lib/firmware/intel/ibt-0040-0041.ddc ibt-firmware/lib/firmware/intel/ibt-0040-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0040-1050.sfi ibt-firmware/lib/firmware/intel/ibt-0040-4150.sfi ibt-firmware/lib/firmware/intel/ibt-0041-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0180-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0180-1050.sfi ibt-firmware/lib/firmware/intel/ibt-0180-4150.sfi ibt-firmware/lib/firmware/intel/ibt-1040-0041.sfi ibt-firmware/lib/firmware/intel/ibt-1040-4150.sfi iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0-83.ucode iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0.pnvm Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath11k-firmware: Move from kvalo to new upstream repositorySven Eckelmann2024-03-07
| | | | | | | | | | | | | | It was announced [1] that the original staging repositories are no longer used for staging of new firmware binaries. And that the old repository will be removed [2] in June 2024. The ath11k-firmware package must therefore point to the new repository before the old one is no longer accessible. [1] https://lore.kernel.org/r/bac97f31-4a70-4c4c-8179-4ede0b32f869@quicinc.com [2] https://github.com/kvalo/ath11k-firmware/commit/8d2cc160f390badd62970a66483214773c3fbea1 Signed-off-by: Sven Eckelmann <sven@narfation.org>
* qualcommax: ipq60xx: add support for netgear wax214Dirk Buchwalder2024-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear WAX214 is a 802.11 ax dual-band AP with PoE. (similar to Engenius EWS357APV3) Specifications: • CPU: Qualcomm IPQ6010 Quad core Cortex-A53 • RAM: 512MB of DDR3 • Storage: 128MB NAND (Macronix MX30UF1G18AC) • Ethernet: 1x 1G RJ45 port (QCA8072) PoE • WIFI: 2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate 5GHz: Qualcomm QCN5052 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate • LEDs: 4 x GPIO-controlled LEDs - 1 Power LED (orange) - 1 LAN LED (blue) - 1 WIFI 5g LED (blue) - 1 WIFI 2g LED (blue) black_small_square Buttons: 1x soft reset black_small_square Power: 12V DC jack or PoE (802.3af ) An populated serial header is onboard, format is 1.25mm 4p (DF13A-4P-1.25H) RX/TX is working, bootwait is active, secure boot is not enabled. The root password of the stock firmware is unknown, but failsafe mode can be entered to reset the password. Installation Instructions: - obtain serial access - stop auto boot (press "4", Entr boot command line interface) - setenv active_fw 0 (to boot from the primary rootfs, or set to 1 to boot from the secondary rootfs partition) - saveenv - tftpboot the initramfs image - bootm - copy openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi to the device - write the image to the NAND: - cat /proc/mtd and look for rootfs partition (should be mtd11, or mtd12 if you choose active_fw 1) - ubiformat /dev/mtd11 -f -y openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi - reboot Note: the firmware is senao-based. But I was unable to build a valid senao-header into the image. Maybe they changed the header format and senaoFW isn't working any more. Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
* ipq-wifi: update to version 2024-03-04Dirk Buchwalder2024-03-05
| | | | | | The new version adds support for the Netgear WAX214. Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
* ls-mc: bump to 10.38.0Pawel Dembicki2024-03-02
| | | | | | Update ls-mc to latest 10.38.0 version. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ls-dpl: bump to 10.38.0Pawel Dembicki2024-03-02
| | | | | | Update ls-dpl to latest 10.38.0 version. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ipq-wifi: update to version 2024-02-25, remove unused ipq8174 extensionPaweł Owoc2024-02-25
| | | | | | | fc30aee ipq8074: remove regdomain, update regdb and rename MX4200 BDF Remove unused ipq8174 extension Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
* ipq40xx: Add support Netgear LBR20Marcin Gajda2024-02-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **Netgear LBR20** is a router with two gigabit ethernets , three wifi radios and integrated LTE cat.18 modem. SoC Type: Qualcomm IPQ4019 RAM: 512 MiB Flash: 256 MiB , SLC NAND, 2 Gbit (Macronix MX30LF2G18AC) Bootloader: U-Boot Modem: LTE CAT.18 Quectel EG-18EA , Max. 1.2Gbps downlink / 150Mbps uplink WiFi class AC2200: - radio0 : 5G on QCA9888 , WiFi5- 802.11a/n/ac MU-MIMO 2x2 , 887Mbps , 80MHz - limited for low channels - radio1: 2,4G on IPQ4019 ,WiFi4- 802.11b/g/n MIMO2x2 300Mbps 40Mhz - radio2: 5G on IPQ4019 , WiFi5- 802.11a/n/ac MU-MIMO 2x2 , 887Mbps ,80Mhz - limited for high channels (from 100 up to 165) . Becouse of DFS remember to set country before turning on. Ethernet: 2x1GbE (WAN/LAN1, LAN2) LEDs: section power : green and red , section on top (orbi) drived by TLC59208F: red, green ,blue and white USB ports: No Buttons: 2 Reset and SYNC(WPS) Power: 12 VDC, 2,5 A Connector type: Barrel OpenWRT Installation 1. Simplest way is just do upgrade from webpage with *factory.img 2. You can also do it with standard tool for Netgear's debricking - NMPRFlash 3. Most advanced way is to open device , connect to UART console and : - Prepare OpenWrt initramfs image in TFTP server root (server IP 192.168.1.10) - Connect serial console (115200,8n1) to UART connector - Connect TFTP server to RJ-45 port - Stop in u-Boot and run u-Boot command: > setenv serverip 192.168.1.10 > set fdt_high 0x85000000 > tftpboot 0x83000000 openwrt-ipq40xx-generic-netgear_lbr20-initramfs-zImage.itb > bootm 0x83000000 - Login via ssh - upload or download *sysupgrade.bin ( like wget ... or scp transfer) - Install image via "sysupgrade -n" (like “sysupgrade -n /tmp/openwrt-ipq40xx-generic-netgear_lbr20-squashfs-sysupgrade.bin”) Back to Stock - Download firmware from official Netgear's webpage , it will be *.img file after decompressing. - Use NMRPFlash tool ( detailed insructions on project page https://github.com/jclehner/nmrpflash ) Open the case - Unscrew nuts and remove washers from antenna's conectors. - There are two Torx T10 screws under the label next to antenna conectors. You have to unglue this label from left and right corner to get it - Two parts of shell covers will slide out from eachother , you have to unglue two small rubber pads and namplate sticker on bottom to do that. - PCB is screwed with 4Pcs of Torx T10 screws - Before lifting up PCB remove pigtiles for LTE antennas and release them from PCB and radiator (black and white wires) - On other side of PCB ,in left bottom corner there is already soldered with 4 pins UART connector for console. Counting from left it is +3,3V , TX , RX ,GND (reffer to this picture: https://i.ibb.co/Pmrf9KB/20240116-103524.jpg ) BDF's files are in firmware_qca-wireless https://github.com/openwrt/firmware_qca-wireless/ and in parallel sent to ath10k@lists.infradead.org. Signed-off-by: Marcin Gajda <mgajda@o2.pl>
* ipq-wifi: fix archive hashRobert Marko2024-02-23
| | | | | | | | | It seems that ipq-wifi bump included and incorrect PKG_MIRROR_HASH value, so fix it by using: make package/firmware/ipq-wifi/check FIXUP=1 Fixes: 70fd815e57dc ("qualcommax: ipq807x: add support for Linksys MX5300") Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq807x: add support for Linksys MX5300Paweł Owoc2024-02-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: ======== SoC: Qualcomm IPQ8072A Flash: 512MB (Winbond W29N04GZBIBA) RAM: 1GB (2x Nanya DDR3L NT5CC256M16ER-EK) Ethernet: 5x 10/100/1000Mbps (Qualcomm QCA8075) WiFi1: 5GHz ac 4x4 (Qualcomm QCA9984 + Skyworks SKY85746-11) - channels 100-169 WiFi2: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64 WiFi3: 2.4GHz ax 4x4 (Qualcomm QCN5024 + Skyworks SKY8340-11) IoT: Bluetooth 5, Zigbee and Thread (Qualcomm QCA4024 + Skyworks SE2433T-R) IoT Flash: 4MB (Macronix MX25R3235F) RTC: ST M41T00S LED: 1x RGB status (NXP PCA9633) USB: 1x USB 3.0 Button: WPS, Reset Flash instructions: ======== 1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin image. More details can be found here: https://www.linksys.com/hk/support-article?articleNum=274497 After first boot check actual partition: - fw_printenv -n boot_part and install firmware on second partition using command in case of 2: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel and in case of 1: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 2. Installation using serial connection from OEM firmware (default login: root, password: admin): - fw_printenv -n boot_part In case of 2: - flash_erase /dev/mtd21 0 0 nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin or in case of 1: - flash_erase /dev/mtd23 0 0 nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin After first boot install firmware on second partition: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel or: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 3. Installation from initramfs image using USB FAT32 formatted drive: Stop u-boot and run: - usb start && fatload usb 0:1 $loadaddr openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb && bootm $loadaddr Write firmware to the flash from initramfs: - mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel and: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 4. Back to the OEM firmware: - mtd -e kernel -n write FW_MX5300_1.1.9.200251_prod.img kernel and: - mtd -r -e alt_kernel -n write FW_MX5300_1.1.9.200251_prod.img alt_kernel 5. USB recovery: - fw_setenv usbimage 'openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb' fw_setenv bootusb 'usb start && fatload usb 0:1 $loadaddr $usbimage && bootm $loadaddr' fw_setenv bootcmd 'run bootusb; aq_load_fw && if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi' Notes: ======== IoT device is accesible over spi. Not yet supported. Signed-off-by: Paweł Owoc <frut3k7@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ipq-wifi: add support for 8devices Mango boardMantas Pucka2024-02-21
| | | | | | Add support for .ipq6018 BDF suffix and add Mango board entry Signed-off-by: Mantas Pucka <mantas@8devices.com>
* ipq-wifi: update to Git HEAD (2024-02-19)Mantas Pucka2024-02-21
| | | | | | | 1cc59e1 ipq6018: add 8devices Mango BDF 10279cc ipq40xx:Add support for Netgear LBR20 with two BDF's Signed-off-by: Mantas Pucka <mantas@8devices.com>
* ath11k-firmware: add wifi firmware for ipq6018Mantas Pucka2024-02-21
| | | | | | | So far only stable FW is v2.4. It exists in a different git repo, so add custom download routine. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* linux-firmware: intel: add BE200 wifi firmwareJanusz Dziedzic2024-02-18
| | | | | | | Add option to install Intel BE200 firmware required by iwlwifi driver and Wifi7 hardware. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
* linux-firmware: package firmware for Airoha EN8811H PHYDaniel Golle2024-02-15
| | | | | | | Add package with firmware for Airoha EN8811H 2.5G Ethernet PHY which needs to be loaded via MDIO before the PHY can be used. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firmware: package firmware for built-in 2.5G PHY on MT7988Daniel Golle2024-02-15
| | | | | | | | Firmware for the built-in 2.5G Ethernet PHY of the MediaTek MT7988 SoC is now part of linux-firmware, so we can package it. Only a single file is needed with recent driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq807x: add support for CMCC RM2-6Chukun Pan2024-02-15
| | | | | | | | | | | | | | | | | | Hardware specifications: SoC: Qualcomm IPQ8070A RAM: 512MB of DDR3 Flash: 256MB Micron NAND Ethernet: 2x 1G RJ45 port WiFi1: QCN5024 2x2 2.4GHz WiFi2: QCN5054 2x2 5GHz Fan: 1x GPIO controlled Button: Reset, WPS Flash instructions: Upload factory.bin in stock firmware's upgrade page. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* wireless-regdb: update to 2024.01.23Yuu Toriyama2024-02-04
| | | | | | | | | | | | | | | | The maintainer and repository of wireless-regdb has changed. https://lore.kernel.org/all/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/ Changes: 37dcea0 wireless-regdb: Update keys and maintainer information 9e0aee6 wireless-regdb: Makefile: Reproducible signatures 8c784a1 wireless-regdb: Update regulatory rules for China (CN) 149c709 wireless-regdb: Update regulatory rules for Japan (JP) for December 2023 bd69898 wireless-regdb: Update regulatory rules for Singapore (SG) for September 2023 d695bf2 wireless-regdb: Update and disable 5470-5730MHz band according to TPC requirement for Singapore (SG) 4541300 wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
* linux-firmware: add Raspberry Pi 5 NVRAMMarty Jones2024-01-25
| | | | | | | | The RPi 5 expects the same NVRAM as the one from RPi 4 on a different file. Signed-off-by: Marty Jones <mj8263788@gmail.com> [Reword commit description, add missing PKG_RELEASE bump] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq807x: fix whitespace usagePaweł Owoc2024-01-15
| | | | | | Replace with tab and remove unused whitespaces Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
* ipq-wifi: fix PKG_MIRROR_HASHManuel Fombuena2024-01-08
| | | | | | | Incorrect PKG_MIRROR_HASH introduced on #14356 Fixes: 934873f4514b ("ipq-wifi: bump version to 2024-01-06-71f45cff") Signed-off-by: Manuel Fombuena <mfombuena@innovara.co.uk>
* ipq-wifi: bump version to 2024-01-06-71f45cffManuel Fombuena2024-01-08
| | | | | | | | | | | 673662f ipq8074: add Wallys DR8072V01 BDF 7e8b237 ipq40xx: add ZyXEL WSQ50 QCA4019 BDF 831c1bd ipq40xx: add ZyXEL WSQ50 QCA9984 BDF f9ff251 ipq40xx: add ASUS MAP-AC2200 QCA9888 BDF 71f45cf ipq8074: Update MX4200 BDF Signed-off-by: Manuel Fombuena <mfombuena@innovara.co.uk> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ipq807x: add support for Linksys MX4200 V1 and V2Mohammad Sayful Islam2024-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linksys MX4200 is a 802.11ax Tri-band router/AP. Specifications: * CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz * RAM: 512MB of DDR3 * Storage: 512Mb NAND * Ethernet: 4x1G RJ45 ports (QCA8075) * WLAN: * 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate * 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * LED-s: * RGB system led * Buttons: 1x Soft reset 1x WPS * Power: 12V DC Jack Installation instructions: Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup. Login with your admin password. The default password can be found on a sticker under the device. To enter into the support mode, click on the “CA” link and the bottom of the page. Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button. Click start. Ignore all the prompts and warnings by click “yes” in all the popups. The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device. Then you would need to write openwrt to the other partition for it to work - First Check booted partition fw_printenv -n boot_part - Then install Openwrt to the other partition if booted in slot 1: mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel - If in slot 2: mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel Replace (X) with your model version either 1 or 2 Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: update to 20231211Tianling Shen2023-12-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 06fa7dd2 cxgb4: Update firmware to revision 1.27.4.0 fd44bdae amdgpu: DMCUB updates for various AMDGPU asics 7ed62638 Revert "rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225" 42d31f8f rtl_bt: Add firmware v2 file for RTL8852C 0ab353f8 Merge branch 'for-upstream' of http://git.chelsio.net/pub/git/linux-firmware f2eb058a linux-firmware: Update AMD cpu microcode 980373f5 cirrus: Add CS35L41 firmware for HP G11 models 789aa815 amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2 ae80f1f1 Revert "amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2" 6c089c10 amdgpu: DMCUB updates for various AMDGPU asics 0e048b06 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware 5eeda20d amdgpu: DMCUB updates for various AMDGPU asics 81caac98 i915: add GSC 102.0.0.1655 for MTL ca49c8cf rtw89: 8851b: update fw to v0.29.41.2 ef41ae8f rtw89: 8852b: update fw to v0.29.29.3 a33f8f1a amdgpu: update DMCUB to 0.0.181.0 for various AMDGPU ASICs 97e88a0d linux-firmware: Update AMD SEV firmware d0172b89 linux-firmware: update firmware for qat_4xxx devices 50da38ee Merge branch 'mtl_gsc_1655' of git://anongit.freedesktop.org/drm/drm-firmware fc45c425 linux-firmware: Update firmware file for Intel Bluetooth AX201 3892dc01 linux-firmware: Update firmware file for Intel Bluetooth AX200 606a17b1 linux-firmware: Update firmware file for Intel Bluetooth AX210 55545299 linux-firmware: Update firmware file for Intel Bluetooth AX211 904880ad linux-firmware: Update firmware file for Intel Bluetooth AX211 e6c09397 linux-firmware: Update firmware file for Intel Bluetooth AX203 51e9ea58 linux-firmware: Update firmware file for Intel Bluetooth AX203 58773db5 Merge https://github.com/pkshih/linux-firmware 2bad80e7 copy-firmware: Support additional compressor options db99828b copy-firmware: Introduce 'RawFile' keyword becc678d Merge tag 'amd-2023-08-18' of https://gitlab.freedesktop.org/drm/firmware 659dfe64 Merge tag 'amd-2023-08-25' of https://gitlab.freedesktop.org/drm/firmware 49f9e347 i915: Update MTL DMC to v2.16 8e1fe1bd Merge branch 'dmc-mtl_2.16' of git://anongit.freedesktop.org/drm/drm-firmware 27fb2f63 check_whence: reformat using python black c442a500 Add pre-commit hooks and codespell template 5e2367f8 Wire up pre-commit to `make check` 408eb34a Rewrite README in markdown 5ebb5914 Merge branch 'mlimonci/update-ci' into 'main' 792115b2 Add Dockerfile used to build CI image 69e68cde Add gitlab ci for calling pre-commit and ci-fairy b2f03c84 Add a rule for automatic tagging releases by pipeline schedule c79933a8 Fix carl9170fw shell scripts for shellcheck errors 8976d8c3 Add shellcheck pre-commit target 1edd2d6f QCA: Update Bluetooth WCN685x 2.1 firmware to 2.1.0-00605 61501389 Merge branch 'mlimonci/enable-pre-commit-ci' into 'main' 6c097314 Merge branch 'mlimonci/shellcheck' into 'main' 3e79f6b8 Create symlinks for all firmware that is duplicate using rdfind bcc397d6 Add new toplevel 'make dist' target. f12059b7 Capture artifacts from `make dist` to save at release time. d5c485f9 Only run ci-fairy on merge requests bb4f6589 Merge branch 'mlimonci/skip-ci-fairy-for-main' into 'main' c57a9388 Merge https://github.com/tjiang1234/btfw-wcn6855-605 80de4d8a check_whence: Recognize RawFile keyword c6ce6ac0 WHENCE: amd-ucode: Use new RawFile keyword e805619f WHENCE: Don't compress qcom json files 7d8f2d95 Merge branch 'RawFile' into 'main' a0142c57 ath10k/WCN3990: move wlanmdsp to qcom/sdm845 fe85b0c7 Merge branch 'qcom' into 'main' 20d250e3 Merge branch 'mlimonci/make-dist' into 'main' 9f3ec3a8 qcom: add GPU firmware for QCM2290 / QRB2210 a32c8568 qcom: add firmware for QCM2290 platforms 89659cb9 qcom: add firmware for QRB4210 platforms 106ff9f9 qcom: add venus firmware files for v6.0 74cc8ca8 qcom: add firmware for the onboard WiFi on qcm2290 / qrb4210 1346f922 qcom: sm8250: update DSP firmware adeabfda qcom: Update vpu-1.0 firmware bb3d5bc9 qcom: sm8250: add RB5 sensors DSP firmware 7d94e0fa linux-firmware: add link to sc8280xp audioreach firmware ad03b851 Merge branch 'rb12-fw-v2' into 'main' 28935de4 Merge branch 'rb5-update' of https://github.com/lumag/linux-firmware into rb5-update 473be1c4 Merge branch 'rb5-update' into 'main' 60458657 Merge branch 'sc8280xp-audio-fw-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/srini/linux-firmware into sc8280xp-audio-fw-fixes cb926295 Merge branch 'sc8280xp-audio-fw-fixes' into 'main' c801b3b8 Turn off textwidth check dfa11466 Merge branch 'main' into 'main' 2bbca647 amdgpu: update DMCUB to 0.0.183.0 for various AMDGPU ASICs a5dbe400 i915: update MTL HuC to version 8.5.4 3a9bcf45 Merge branch 'main' into 'main' d252e92d linux-firmware: amd-ucode: Add note on fam19h warnings 3a07aa51 Merge branch 'amd-ucode' into 'main' 3786ca8f Merge branch 'mtl_huc_8.5.4' of git://anongit.freedesktop.org/drm/drm-firmware into mtl_huc 919300d1 Merge branch 'mtl_huc' into 'main' f48da6da Run merge request pipelines for pre-commit. 3672ccab Merge branch 'mlimonci/fix-merge-requests-ci' into 'main' 08532e36 iwlwifi: update cc/Qu/QuZ firmwares for core81-65 release 765492b8 iwlwifi: add new FWs from core81-65 release 29b47c59 Merge branch 'main' into 'main' addc3392 rtl_bt: Update RTL8851B BT USB firmware to 0x048A_D230 1ed8d8bf linux-firmware: Update FW files for MRVL PCIE 8997 chipsets 7d1f06ab Merge branch 'rtl_bt' into 'main' 74830f66 Merge branch 'mrvl' into 'main' 328beacb amd_pmf: Add initial PMF TA for Smart PC Solution Builder 8b855f37 Merge branch 'main' into 'main' a6744df8 iwlwifi: add FWs for new GL and MA device types with multiple RF modules 1c285c0a amdgpu: update aldebaran firmware from 5.7 branch f9366fa1 amdgpu: update GC 11.0.3 firmware from 5.7 branch b21bd580 amdgpu: update PSP 13.0.10 firmware from 5.7 branch 5a99cd50 amdgpu: update SMU 13.0.10 firmware from 5.7 branch abe39de3 amdgpu: update raven2 firmware from 5.7 branch 7f027004 amdgpu: update navi10 firmware from 5.7 branch c25d0ef6 amdgpu: update yellow carp firmware from 5.7 branch aa67101a amdgpu: update GC 11.0.2 firmware from 5.7 branch 22ca16ee amdgpu: update PSP 13.0.7 firmware from 5.7 branch a3b30e39 amdgpu: update SDMA 6.0.2 firmware from 5.7 branch 971fe4bd amdgpu: update SMU 13.0.7 firmware from 5.7 branch fd688e37 amdgpu: update VCN 4.0.4 firmware from 5.7 branch 17a48ca2 amdgpu: update navi12 firmware from 5.7 branch d850220b amdgpu: update renoir firmware from 5.7 branch fcf92700 amdgpu: update navi14 firmware from 5.7 branch a34604d3 amdgpu: update GC 11.0.1 firmware from 5.7 branch 7b785ce1 amdgpu: update PSP 13.0.4 firmware from 5.7 branch ab618fa5 amdgpu: update SDMA 6.0.1 firmware from 5.7 branch 4ee8dc91 amdgpu: update GC 11.0.4 firmware from 5.7 branch c09f4219 amdgpu: update PSP 13.0.11 firmware from 5.7 branch b828f43c amdgpu: update sienna cichlid firmware from 5.7 branch f8f3d52e amdgpu: update green sardine firmware from 5.7 branch 7d8a4a06 amdgpu: update vangogh firmware from 5.7 branch e6a3c06e amdgpu: update navy flounder firmware from 5.7 branch 5e40e6c2 amdgpu: update picasso firmware from 5.7 branch 51637156 amdgpu: update dimgrey cavefish firmware from 5.7 branch 08e23f2c amdgpu: update vega10 firmware from 5.7 branch 050fe578 amdgpu: update vega12 firmware from 5.7 branch ee81c65c amdgpu: update beige goby firmware from 5.7 branch 0923446e amdgpu: update vega20 firmware from 5.7 branch c321aeee amdgpu: update GC 11.0.0 firmware from 5.7 branch 7baff8dd amdgpu: update PSP 13.0.0 firmware from 5.7 branch 9973966a amdgpu: update SDMA 6.0.0 firmware from 5.7 branch af3d18b3 amdgpu: update SMU 13.0.0 firmware from 5.7 branch b65ac01b amdgpu: update VCN 4.0.0 firmware from 5.7 branch a92f8f21 amdgpu: update GC 10.3.6 firmware from 5.7 branch fc627e98 amdgpu: update PSP 13.0.5 firmware from 5.7 branch f5b7964e amdgpu: update SDMA 5.2.6 firmware from 5.7 branch 5837f76c amdgpu: update DCN 3.1.6 firmware from 5.7 branch 35d98aaf amdgpu: update GC 10.3.7 firmware from 5.7 branch 8ba97109 amdgpu: update PSP 13.0.8 firmware from 5.7 branch 75e5b634 amdgpu: update SDMA 5.2.7 firmware from 5.7 branch 95ec6f69 amdgpu: update raven firmware from 5.7 branch 18b60f44 i915: Update MTL DMC to v2.17 cef80743 Add new Makefile target to build a deb and rpm package ce33c671 Build debian and fedora images 312b5d8a Merge branch 'iwlwifi-fw-2023-09-27' into 'main' 957828e1 linux-firmware: Update firmware file for Intel Bluetooth 9260 717c1a5d linux-firmware: Update firmware file for Intel Bluetooth 9560 a3e18aff linux-firmware: Update firmware file for Intel Bluetooth AX210 3fed6fb8 linux-firmware: Update firmware file for Intel Bluetooth AX211 3ce0e06b linux-firmware: Update firmware file for Intel Bluetooth AX211 8c1e8c66 linux-firmware: Update firmware file for Intel Bluetooth AX201 bbf94191 linux-firmware: Update firmware file for Intel Bluetooth AX201 ab0c0a78 linux-firmware: Add firmware file for Intel Bluetooth AX211 2316c3d0 Merge branch 'intel-bt-20231004' into 'main' 58b8d3f3 Merge branch 'dmc-mtl_2.17' of git://anongit.freedesktop.org/drm/drm-firmware into dmc-mtl 8e57de05 Merge branch 'dmc-mtl' into 'main' 5105ff4b Merge branch 'mlimonci/upstream-packaging' into 'main' 389575a8 WHENCE: add symlink for BananaPi M64 7727f7e3 Merge branch 'patch-1696561325' into 'main' 92e24e04 iwlwifi: add a missing FW from core80-39 release 44a9510c i915: Add GuC v70.13.1 for DG2, TGL, ADL-P and MTL 1be48f85 Merge branch 'pr-24-1697222431' into 'main' 4d619071 Add a script for a robot to open up pull requests 0da49b90 linux-firmware: add Amlogic bluetooth firmware 63e8aa40 Merge branch 'main' into 'main' a3bcbbf2 amdgpu: update SMU 13.0.0 firmware 8ff933de Merge branch 'robot/pr-0-1697570762' into 'main' f893135f Merge branch 'robot/pr-0-1697658135' into 'main' ecaeef5d Add support for sending emails while processing a PR/patch 29e9aa86 Merge branch 'mlimonci/robot' into 'main' 06afd7f9 linux-firmware: Update AMD cpu microcode 1115cf5c Merge branch 'robot/patch-0-1697735493' into 'main' 6ed75465 Fix the robot email script d983107a Merge branch 'mlimonci/fix-email' into 'main' 7bfa5f4d Catch unicode decode errors 3de241ed rtl_nic: update firmware of RTL8156B 39d55392 Use `git am` instead of `b4 shazam` ad84593d Merge branch 'robot/patch-23-1698074268' into 'main' 5f560c1e Merge branch 'mlimonci/unicode' into 'main' 4ee01756 Merge branch 'mlimonci/use-am' into 'main' b22703ca Disable deb and rpm CI other than at release 80703e05 Merge branch 'mlimonci/less-ci' into 'main' 37761e2b Intel Bluetooth: Update firmware file for Intel Bluetooth BE200 dd6368d9 Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX211 fabc67bf Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX201 581a25e6 Intel Bluetooth: Update firmware file for Intel Bluetooth AX203 bc0b7dfa Intel Bluetooth: Update firmware file for Intel Bluetooth AX203 2ceaa29d Merge branch 'core80' into 'main' dcec764d Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX101 1962446e Intel Bluetooth: Update firmware file for Intel Bluetooth AX210 4c092813 Intel Bluetooth: Update firmware file for Intel Bluetooth AX211 59aaeac9 Intel Bluetooth: Update firmware file for Intel Bluetooth AX211 2b304bfe Merge branch 'main' into 'main' 02df6e4f rtw89: 8851b: update fw to v0.29.41.3 7a916315 rtw89: 8852b: update fw to v0.29.29.4 2afd1423 rtw89: 8852b: update fw to v0.29.29.5 1ba9408e linux-firmware: ixp4xx: Add the IXP4xx firmware 411938ad Merge branch 'mlimonci/rtw89' into 'main' 185e84b8 Merge branch 'ixp4xx' into 'main' 724c77e5 qca: add bluetooth firmware for WCN3988 19342f15 Merge branch 'apbtfw' into 'main' 65a89b16 amdgpu: DMCUB updates for various AMDGPU ASICs df98199f Merge tag 'amd-2023-11-03' 9a3bf241 Merge branch 'main' into 'main' 9a170370 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210 cdecf243 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211 be41333c Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211 34600f06 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203 8563348b Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203 ed34505f Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211 92faee69 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203 19c3c023 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101 a5a6dded Intel Bluetooth: Update firmware file for Intel Bluetooth BE200 2340796d Merge branch 'main' into 'main' f4a3c72e nvidia: add GSP-RM version 535.113.01 firmware images 16b92b8d Merge branch 'mlimonci/nvidia-gsp-rm-535' into 'main' cc8a7d10 Fix classification of some pull requests 4c55675d Fix symlink creation for some files 195eae59 Add checks for destination directory being specified cf8315de Ensure rdfind is installed b79f31cf Merge branch 'mlimonci/fix-symlinks' into 'main' 1ee89a11 Merge branch 'mlimonci/robot-fix' into 'main' c57c8384 amdgpu: DMCUB updates for various AMDGPU ASICs 1737b581 Merge tag 'amd-2023-11-10' into amd-2023-11-10 74158e7a Merge branch 'amd-2023-11-10' into 'main' bf5150dd Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210 80a378a2 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211 b021ad7c Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211 bfc7dbe7 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203 4eb64f9b Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203 c7c5ca39 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX101 80907d76 Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX101 8b5a4168 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211 5e40b6aa Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203 307a4e50 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101 6910095b linux-firmware: add firmware for mt7988 internal 2.5G ethernet phy bd4df953 Merge branch 'main' into 'main' 398b4605 Merge branch 'robot/patch-0-1699862686' into 'main' 1f8f61d5 Process pull requets directly from mbox 05ac293b Add extra debugging output when processing pull requests d011ba69 Add a workaround for gitlab.freedesktop.org pull requests b72eeb60 Merge branch 'mlimonci/robot-pr-improvements' into 'main' 978dff67 linux-firmware: Add firmware for Cirrus CS35L41 on 2024 ASUS Zenbook Laptops 4f498d09 linux-firmware: Add firmware for Cirrus CS35L41 on HP G11 Laptops 4fc5801e iwlwifi: update cc/Qu/QuZ firmwares for core83-55 release a07fd0b9 iwlwifi: add new FWs from core83-55 release 124b6639 Merge branch 'robot/pr-0-1700068965' into 'main' 9009038b Enable deb and rpm builds on tags f27dec61 iwlwifi: fix for the new FWs from core83-55 release 58ec4325 Merge branch 'mlimonci/release-packages' into 'main' 8228c222 Try both utf-8 and windows-1252 for decoding email b486a13b Merge branch 'robot/pr-17-1700153404' into 'main' 6723a8d9 Merge branch 'robot/pr-5-1700153542' into 'main' bfd5f0b9 Make email replies more resilient 45109014 i915: Update MTL DMC to v2.19 f81145a0 Merge branch 'robot/pr-0-1700234575' into 'main' 7124ce30 Merge branch 'mlimonci/encoding' into 'main' c03db704 amdgpu: update DMCUB firmware to 0.0.193.0 for DCN31 and DCN314 ba1aa06f Intel Bluetooth: Update firmware file for Intel Bluetooth BE200 a41fa7c5 mediatek: Sync shared memory structure changes c3ce13b3 Merge branch 'main' into 'main' 9552083a Merge branch 'robot/pr-0-1700470117' into 'main' 0c211dbe Merge branch 'amd-staging' into 'main' 5e9fdab5 mediatek: Remove an unused packed library bef5a36d Merge branch 'robot/patch-1-1700555775' into 'main' 47582844 ice: update ice DDP package to 1.3.35.0 0628ba79 ice: update ice DDP comms package to 1.3.45.0 ad0bbae4 Merge branch 'robot/patch-1-1700674626' into 'main' a5539dc1 Merge branch 'robot/patch-2-1700674629' into 'main' 9afbbf25 powervr: add firmware for Imagination Technologies AXE-1-16M GPU fad38ab8 Merge branch 'powervr-2023-11-23' into 'main' ea682fba qcom: update Venus firmware file for v6.0 18f56bf3 qcom: update qcm2290/qrb4210 WiFi firmware file 0bba2c99 qcom: update qcm2290 firmware 6cfedcbb qcom: update qrb4210 firmware 87427f23 amdgpu: update DMCUB firmware to 0.0.194.0 for DCN321 and DCN32 f6d61ded Merge branch 'robot/pr-0-1700887115' into 'main' c6823ce2 Makefile, copy-firmware: Use portable "command -v" to detect installed programs 9fdcf639 Merge branch 'robot/patch-0-1701018572' into 'main' 0a18a729 linux-firmware: update firmware for MT7921 WiFi device 6b91b2ef linux-firmware: update firmware for MT7922 WiFi device cc44f3b8 Merge branch 'mt7921-wifi' into 'main' 1366b827 linux-firmware: update firmware for mediatek bluetooth chip (MT7921) 5955de2f Merge branch 'mt7922-wifi' into 'main' 1180974e linux-firmware: update firmware for mediatek bluetooth chip (MT7922) 351f0c67 Merge branch 'mt7921-bt' into 'main' f440b984 ice: update ice DDP wireless_edge package to 1.3.13.0 adbdc241 Merge branch 'mt7922-bt' into 'main' f8c611e7 Merge branch 'ice-edge' into 'main' 4124f8f9 Make rdfind optional 4fab4e51 Merge branch 'rdfind-opt' into 'main' 98eed92e rtl_bt: Update RTL8852A BT USB firmware to 0xDFC8_145F 5aadb590 Merge branch 'robot/patch-0-1701175489' into 'main' d9f6088f Add a COPYOPTS variable aae60524 Merge branch 'make-opts' into 'main' 37db2a09 s5p-mfc: Add MFC v12 Firmware 034e24b8 Merge branch 's5p-mfc-v12' into 'main' ddc99b3d linux-firmware: add firmware for en8811h 2.5G ethernet phy dbf82492 cxgb4: Update firmware to revision 1.27.5.0 129e07d9 Merge branch 'robot/pr-0-1701358064' into 'main' f63dd70d Merge branch 'robot/patch-0-1701352637' into 'main' b9d971b9 Merge branch 'rb12-update' into 'main' bfc33c1e linux-firmware: Update AMD cpu microcode c004dbee Merge branch 'robot/patch-0-1701808157' into 'main' 23feb609 wfx: fix broken firmware 1505c948 wfx: update to firmware 3.17 f2e52a1c Merge branch 'wfx' into 'main' Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ipq807x: add support for ZTE MF269Chukun Pan2023-12-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specifications: SoC: Qualcomm IPQ8071A RAM: 512MB of DDR3 Flash1: Eon EN25S64 8MB Flash2: MX30UF2G18AC 256MB Ethernet: 2x 2.5G RJ45 port Phone: 1x RJ11 port (SPI) USB: 1x Type-C 2.0 port WiFi1: QCN5024 2.4GHz WiFi2: QCN5054 5GHz Button: Reset, WPS Flash instructions: 1. Connect the router via serial port (115200 8N1 1.8V) 2. Download the initramfs image, rename it to initramfs.bin, and host it with the tftp server. 3. Interrupt U-Boot and run these commands: tftpboot initramfs.bin bootm 4. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ipq807x: add Arcadyan AW1000 supportChukun Pan2023-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: Qualcomm IPQ8072A Flash: Toshiba NAND 1GiB RAM: 1 GiB of DDR3 466 MHz Ethernet: 4x 1Gbps + 1x 2.5Gbps WiFi1: QCN5024 2.4GHz ax 4x4 WiFi2: QCN5054 5GHz ax 4x4 Button: WiFi, WPS, Reset Modem: RG500Q-EA USB: 1 x USB 3.0 Power: DC 12V 4A Flash instructions: 1. Download the initramfs image, rename it to initramfs.bin, and host it with tftp server. 2. Interrupt U-Boot and run these commands: tftpboot initramfs.bin bootm 3. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: intel: add firmware for AX101Jitao Lu2023-11-25
| | | | | | | iwlwifi from 6.5 supports API version up to 83, but 81 is the latest one available from linux-firmware 20230804. Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
* linux-firmware: add Realtek RTW89 firmwareChukun Pan2023-11-13
| | | | | | This is the firmware required for the rtw89 driver. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Powered by cgit, Themed by Ted Yin.