aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* udebug: add more entries for the default configFelix Fietkau2023-11-30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to Git HEAD (2023-11-28)Felix Fietkau2023-11-30
| | | | | | | d852f877920b service: Fix retriggering of init.d-scripts. 7e6c6efd6fbc udebug: add support for logging via udebug Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubox: update to Git HEAD (2023-11-30)Felix Fietkau2023-11-30
| | | | | | | cc34fb7b922f logd: add support for subscribing to the log object c08709cceb55 logd: add udebug support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to Git HEAD (2023-11-30)Felix Fietkau2023-11-30
| | | | | | | | 325fea5c57cf udebug: add functions for manipulating entry length e84c000c4756 udebug: add inline helper function to test if a buffer is allocated 40acbe34632b udebug: wait for response after buffer add/remove Signed-off-by: Felix Fietkau <nbd@nbd.name>
* udebug: update to Git HEAD (2023-11-30)Felix Fietkau2023-11-30
| | | | | | | | | | d49aadabb7a1 lib: fix dealing with udebugd restarts 9ec5fbb6aaad ubus: report ring size and data size via ubus api 86b4396baa44 ring: add debug messages for ring alloc errors e02306af7c50 lib: add helper function for applying ring config b613879cb049 client: send confirmation messages for ring add/remove Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: add support for Confiabits MT7981Luis Mita2023-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Confiabits MT7981 is a Wi-Fi 6 router based on MediaTek MT7981. Specification: - SoC: MediaTek MT7981B - CPU: 2x 1.3 GHz Cortex-A53 - Flash: 128 MiB SPI NAND - RAM: 256 MiB - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN, 802.11ax) - Ethernet: 4x 10/100/1000 Mbps MT7531AE (3xLAN, 1xWAN) - USB 2.0 port - Buttons: 1 Reset button, 1 Mesh button. - LEDs: 7x light-blue, 2x warm-white - Serial console: internal 4-pin header, 115200 8n1 - Power: 12 VDC, 1.5 A MAC addresses in stock firmware and in this commit: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 00:0c:43:xx:xx:e1 | label+1 | | LAN | 00:0c:43:xx:xx:e0 | label | | WLAN 2g | 00:0c:43:xx:xx:e0 | label | | WLAN 5g | 02:0c:43:xx:xx:e0 | | +---------+-------------------+-----------+ The label MAC was found in 'Factory', 0x4 Installation: The stock firmware is OpenWrt-based. If you can reach LuCI or SSH, just use the sysupgrade image with the 'Keep settings' option turned off. Signed-off-by: Luis Mita <luis@luismita.com>
* target: Make TARGET_SERIAL independent of GRUB configurationHauke Mehrtens2023-11-29
| | | | | | | | | | | | | GRUB_SERIAL is also used for the default serial on the target and not only in grub. When no grub was build it was not available and the build fails. Rename GRUB_SERIAL to TARGET_SERIAL and make it always available on x86 and armsr targets. Fixes: #14063 Fixes: b10768476f9d ("x86,armsr: interpolate GRUB_SERIAL into /etc/inittab") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.140John Audia2023-11-29
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.140 Removed upstreamed: mvebu/patches-5.15/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.140&id=06d320ca170b4e59bb261e2ce3ffe84e9154d42b Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.64John Audia2023-11-29
| | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64 Removed upstreamed: ixp4xx/patches-6.1/0001-mtd-cfi_cmdset_0001-Byte-swap-OTP-info.patch[1] mvebu/patches-6.1/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[2] qualcommax/patches-6.1/0026-v6.7-clk-qcom-ipq8074-drop-the-CLK_SET_RATE_PARENT-flag-f.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=3b93096d29c5b9ca2af94be4ee9949c1767acf17 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=b3fd9db79e30d5eb5f76ef1f5b7e4f444af574ea 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=877080a3490102da26b8d969588159b2385f739e Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: add kmod-usb3 to default package set of the ZBT-Z8102AXDaniel Golle2023-11-29
| | | | | | | Include XHCI USB drivers on the ZBT-Z8102AX router, the drivers are required to be able to use the USB-connected M.2 slots for 4G/5G modems. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libubox: update to Git HEAD (2023-11-28)Felix Fietkau2023-11-28
| | | | | | | | b77f2a4ce903 uloop: fix build using C++ compilers 260ad5bd1566 udebug: add ulog support e80dc00ee90c link librt if needed for shm_open Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubus: update to Git HEAD (2023-11-28)Felix Fietkau2023-11-28
| | | | | | | 2b39a27d8bcc libubus: fix reconnect with auto subscribe f84eb5998c6e libubus: fix initial subscribe with autosubscribe Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubox: add acl file for logdFelix Fietkau2023-11-28
| | | | | | Fixes ubus reconnect, since the process user id changes to 'logd' Signed-off-by: Felix Fietkau <nbd@nbd.name>
* udebug: move ubus dependency to libudebugFelix Fietkau2023-11-27
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* udebug: update to Git HEAD (2023-11-27)Felix Fietkau2023-11-27
| | | | | | | | | | a2301fa3b0c6 README: add wireshark info cfd83ccc1e4e server: properly handle unclaimed file descriptors cb71f64de0ec lib: remove leftover debug code a92101631c0d lib: fix avl tree lookup d4b99820afd0 lib: move library code to libubox, add ubus config handling code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to Git HEAD (2023-11-27)Felix Fietkau2023-11-27
| | | | | | | | | | | 82fa6480de7a uloop: add support for interval timers 13d9b04fb09d uloop: add support for user defined signal handlers f7d156911311 uloop: properly initialize signal handler mask 8a5a4319a85c uloop: fix typo in signal handling rework b3fa3d92e3eb uloop: reset flags after __uloop_fd_delete call d4c3066e7c5e udebug: add udebug library code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: copy config for Acer Predator W6David Bauer2023-11-27
| | | | | | Config was previously not copied on sysupgrade. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: add support for GL.iNet GL-MT2500David Bauer2023-11-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: MediaTek MT7981BA RAM: 1GB DDR4 (NANYA NT5AD512M16C4-JR) MMC: 8GB eMMC (Samsung 8GTF4R) ETH: 1000Base-T LAN (ePHY) 2500Base-T WAN (MaxLinear GPY211C) BTN: 1x Reset Button LED: System (blue/white) VPN (white) USB: 1x USB-A (USB 3.0) UART: 115200 8N1 - Pinout on board next to LAN port Don't connect 3.3V! Known Issues ------------ U-Boot vendor recovery does not seem to accept any images, neither GL.iNet images nor OpenWrt images. Recovery requires serial access! Installation ------------ Upload the OpenWrt sysupgrade image to the Gl.iNet Web-UI. Make sure to not retain existing settings. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: require image metadataDavid Bauer2023-11-27
| | | | | | | | | All devices in the rockchip target have appended image-metadata. Enforce the presence of this metadata to avoid flashing incomplete images. This is the de-facto standard for almost all OpenWrt targets. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fortinet-fap-221-b: convert to nvmem-layoutLech Perczak2023-11-27
| | | | | | | | | | | | | Now that MAC address parser supports the hex format (without delimiters), use the canonical MAC address stored in U-boot partition. Get rid of the userspace adjustments which are no longer necessary. While at that, move the mac-base to the common part, as it is again exactly the same in both models. And convert ART partition too - keep that one separate, as calibration data length differs between the models. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: fortinet-fap-220-b: convert to nvmem-layoutLech Perczak2023-11-27
| | | | | | | | | Now that MAC address parser supports the hex format (without delimiters), use the canonical MAC address stored in U-boot partition. Get rid of the "mac-address-increment" binding. While at that, convert ART partition too. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: fortinet-fap-220-b: fix WLAN MAC addressesLech Perczak2023-11-27
| | | | | | | | Addresses were swapped compared to the factory firmware. In addition to that, one of them was shifted by -1. Fix that by setting wlan0 MAC offset to 9, and wlan1 MAC offset to 2. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ustream-ssl: update to Git HEAD (2023-11-26)Hauke Mehrtens2023-11-26
| | | | | | | 91666a3 ustream-mbedtls: Add compatibility with Mbed TLS 3.0.0 263b9a9 cmake: Fail if undefined symbols are used Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86 64: Add new device Cordoba Edge PlatformXiaojun Liu2023-11-26
| | | | | | | | | | | | Add new device Cordoba Edge Platform hardware specifications: CPU - Intel Atom C3000 Ethernet - 2 10Gbps ixgbe SPF+ 2 1Gbps ixgbe RJ45/SPF 4 2.5Gbps igc RJ45 WiFi - mt7915e LED - 3 multicolor(red|blue|green) LEDs Signed-off-by: Xiaojun Liu <xiaojun.liu@silicom.co.il>
* dnsmasq: mark global ubus context as closed after forkSven Eckelmann2023-11-26
| | | | | | | | | | | | | | If the dnsmasq process forks to handle TCP connections, it closes the ubus context. But instead of changing the daemon wide pointer to NULL, only the local variable was adjusted - and this portion of the code was even dropped (dead store) by some optimizing compilers. It makes more sense to change the daemon->ubus pointer because various functions are already checking it for NULL. It is also the behavior which ubus_destroy() implements. Fixes: d8b33dad0bb7 ("dnsmasq: add support for monitoring and modifying dns lookup results via ubus") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* rockchip: add NanoPi R5C supportTianling Shen2023-11-26
| | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-rockchip: add NanoPi R5C supportTianling Shen2023-11-26
| | | | | | Add support for the FriendlyARM NanoPi R5C. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: add NanoPi R5S supportTianling Shen2023-11-26
| | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Tested-by: Packet Please <pktpls@systemli.org> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-rockchip: add NanoPi R5S supportTianling Shen2023-11-26
| | | | | | | Add support for the FriendlyARM NanoPi R5S support. Tested-by: Packet Please <pktpls@systemli.org> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: armv8: broaden boardnameTianling Shen2023-11-26
| | | | | | Now we have rk356x support :-) Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: enable drivers for rk356xTianling Shen2023-11-26
| | | | | | | Enable all necessary drivers for the rk356x SoCs, including PHY, SCMI, SPI etc. Also backport 2 upstream patches for sdhci fixes. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: remove kernel 5.15 patches and configTianling Shen2023-11-26
| | | | | | As we switched to kernel 6.1, these files can go. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: switch to kernel 6.1Tianling Shen2023-11-26
| | | | | | Required by the following rk3568 support. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: move image generation command to defaultTianling Shen2023-11-26
| | | | | | | | It's applicable for all devices so move it to default to reduce redudant code. Addtionally introduce a new variable `BOOT_SCRIPT` to allow custom boot script (if necessary). Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rkbin: add new TF-A package for rk35xxTianling Shen2023-11-26
| | | | | | | Currently there's no usable mainline (open source) TF-A implementation for rk35xx SoCs, so pack the prebuilt firmware from the vendor. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-rockchip: Update to 2023.07.02Tianling Shen2023-11-26
| | | | | | | | | | | | | | | * Removed swig hacks and prebuilt of-platdata * Removed upstreamed patches - 101-rock64pro-disable-CONFIG_USE_PREBOOT.patch - 102-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R2C.patch * Reordered patches * Introduced new dependencies check * Overrided default PATH to avoid race condition (host python3 vs hostpkg python3) * Switched to use UBOOT_CUSTOMIZE_CONFIG for config update Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-sunxi: use intree dtc explicitlyTianling Shen2023-11-26
| | | | | | This replaces pylibfdt hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-sifiveu: use intree dtc explicitlyTianling Shen2023-11-26
| | | | | | This replaces pylibfdt hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-mediatek: use intree dtc explicitlyTianling Shen2023-11-26
| | | | | | This replaces pylibfdt hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* u-boot: introduce dependencies check for swig and pyelftoolsTianling Shen2023-11-26
| | | | | | | They are required by modern u-boot builds, e.g. uboot-rockchip and uboot-sunxi. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ipq40xx: enable UBI size checks for some Linksys NAND devicesTony Ambardar2023-11-26
| | | | | | | | Add correct NAND_SIZE in device definitions for EA6350v3, EA8300, MR8300, WHW01 and WHW03v2, to enable improved image size checks wrt UBI reserved blocks on NAND devices. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* image: improve UBI image sizing on NAND devicesTony Ambardar2023-11-26
| | | | | | | | | | | | | | | | | | | | | | | | Many NAND devices use a build recipe with "append-ubi | check-size" to ensure factory images don't exceed the target flash partition size. However, UBI reserves space for bad block handling and other operational overhead, and thus 'check-size' can overestimate the space available by several MB. In practice, this means a failed check is definitely a failure, while a passing check is only probably a pass. Improve the situation by teaching 'Build/append-ubi' to check image sizes while accounting for UBI reserved blocks. Add new device variable NAND_SIZE and use with existing IMAGE_SIZE to derate the available space. Each UBI device reserves 20 PEBs per 1024 PEBs of the entire NAND device for bad blocks, plus an additional 4 PEBs overhead. Many devices can transparently enable this check by setting NAND_SIZE based on their flash storage, and may then remove any unneeded 'check-size'. Link: http://www.linux-mtd.infradead.org/doc/ubi.html#L_overhead Suggested-by: Shiji Yang <yangshiji66@qq.com> Suggested-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* image: fix Linksys image alignment and simplify footer creationTony Ambardar2023-11-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current factory image sizes for Linksys devices are 256-byte aligned. This is not an issue writing factory images from the OpenWrt or Linksys GUIs, but can lead to failures using a TFTP client from the Linksys bootloader: NAND write: device 1 offset 0x2800000, size 0xc00100 Attempt to write to non page aligned data NAND write to offset 2800000 failed -22 0 bytes written: ERROR Simplify Linksys footer creation by migrating to a makefile build recipe, and pre-pad the footer (with 0xFF) to ensure the final image is $(PAGESIZE) aligned. Finally, remove the old linksys-image.sh script no longer needed. Linksys footer details are given below for future reference. The 256-byte footer is appended to factory images and tested by both the Linksys Upgrader (observed in EA6350v3) and OpenWrt sysupgrade. Footer format: .LINKSYS. Checked by Linksys upgrader before continuing. (9 bytes) <VERSION> Upgrade version number, unchecked so arbitrary. (8 bytes) <TYPE> Model of device, space padded (0x20). (15 bytes) <CRC> CRC checksum of factory image to flash. (8 bytes) <padding> Padding ('0' + 0x20 * 7) (8 bytes) <signature> Signature of signer, unchecked so arbitrary. (16 bytes) <padding> Padding with nulls (0x00) (192 bytes) Link: https://github.com/openwrt/openwrt/pull/11405#issuecomment-1358510123 Link: https://github.com/openwrt/openwrt/pull/11405#issuecomment-1587517739 Reported-by: Stijn Segers <foss@volatilesystems.org> Reported-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* image: use helper function for size unitsTony Ambardar2023-11-26
| | | | | | | | Add the make function 'exp_units' for helping evaluate k/m/g size units in expressions, and use this to consistently replace many ad hoc substitutions like '$(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE)))' in makefiles. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: fix typo in Linksys WHW01 image definitionTony Ambardar2023-11-26
| | | | | | | | Use lower-case "k" in IMAGE_SIZE for Linksys WHW01, permitting proper unit conversions in build recipes (e.g. 75776k -> 75776*1024). Fixes: 2a9f3b7717 ("ipq40xx: fix up Linksys WHW01 board name, device definition") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ath79: add support for D-link DAP-1720 A1Rani Hod2023-11-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | D-Link DAP-1720 rev A1 is a mains-powered AC1750 Wi-Fi range extender, manufactured by Alpha Networks [8WAPAC28.1A1G]. (in square brackets: PCB silkscreen markings) Specifications: * CPU (Qualcomm Atheros QCA9563-AL3A [U5]): 775 MHz single core MIPS 74Kc; * RAM (Winbond W9751G6KB-25J [U3]): 64 MiB DDR2; * ROM (Winbond W25Q128FV [U16]): 16 MiB SPI NOR flash; * Ethernet (AR8033-AL1A PHY [U1], no switch): 1 GbE RJ45 port (no PHY LEDs); * Wi-Fi * 2.4 GHz (Qualcomm Atheros QCA9563-AL3A [U5]): 3x3 802.11n; * 5 GHz (Qualcomm Atheros QCA9880-BR4A [U9]): 3x3 802.11ac Wave 1; * 3 foldable dual-band antennas (U.fl) [P1],[P2],[P3]; * GPIO LEDs: * RSSI low (red/green) [D2]; * RSSI medium (green) [D3]; * RSSI high (green) [D4]; * status (red/green) [D5]; * GPIO buttons: * WPS [SW1], co-located with status LED; * reset [SW4], accessible via hole in the side; * Serial/UART: Tx-Gnd-3v3-Rx [JP1], Tx is the square pin, 1.25mm pitch; 125000-8-n-1 in U-boot, 115200-8-n-1 in kernel; * Misc: * 12V VCC [JP2], fed from internal 12V/1A AC to DC converter; * on/off slide switch [SW2] (disconnects VCC mechanically); * unpopulated footprints for a Wi-Fi LED [D1]; * unpopulated footprints for a 4-pin 3-position slide switch (SW3); MAC addresses: * Label = LAN; * 2.4 GHz WiFi = LAN; * 5 GHz WiFi = LAN+2; Installation: * `factory.bin` can be used to install OpenWrt from OEM firmware via the standard upgrade webpage at http://192.168.0.50/UpdateFirmware.html * `recovery.bin` can be used to install OpenWrt (or revert to OEM firmware) from D-Link Web Recovery. To enter web recovery, keep reset button pressed and then power on the device. Reset button can be released when the red status LED is bright; it will then blink slowly. Set static IP to 192.168.0.10, navigate to http://192.168.0.50 and upload 'recovery.bin'. Note that in web recovery mode the device ignores ping and DHCP requests. Note: 802.11s is not supported by the default `ath10k` driver and firmware, but is supported by the non-CT driver and firmware variants. The `-smallbuffers` driver variant is recommended due to RAM size. Co-developed-by: Anthony Sepa <protectivedad@gmail.com> Signed-off-by: Rani Hod <rani.hod@gmail.com>
* ath79: ar: convert to mac-baseRosen Penev2023-11-25
| | | | | | Replacement for deprecated mac-address-increment Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: ar: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Will allow removing deprecated mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: tp9343: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Allows getting rid of deprecated mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: qcn: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Allows getting rid of deprecated mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
Powered by cgit, Themed by Ted Yin.