aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* mediatek: filogic: restore non-const type in pinctrl-mt7988 driverDaniel Golle2023-08-03
| | | | | | | | When building with Linux 5.15 the 'const' type results in warnings. Restore the original non-const type in those cases. Fixes: 36d0aa9c2d ("mediatek: filogic: sync pinctrl-mt7988 with MediaTek SDK") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: fix unused device removal on DBDC devicesFelix Fietkau2023-08-03
| | | | | | | Check the phy before removing unrelated netdevs on the same hw device Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: filogic: update MT7988 device treeDaniel Golle2023-08-03
| | | | | | | | * move ethernet to mt7988a.dtsi * move switch definition to mt7988a.dtsi * add PHY LEDs Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: sync pinctrl-mt7988 with MediaTek SDKDaniel Golle2023-08-03
| | | | | | Update pinctrl driver for the MT7988 with driver from mtk-openwrt-feeds. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: netdevices: add driver for Marvell 10G Ethernet PHYsDaniel Golle2023-08-03
| | | | | | | Package kernel module for Marvell 10G Ethernet PHYs found also in many 10G/1G/100M/10M RJ-45 SFP+ modules. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* xdp-tools: disable stack protector for BPF programsStijn Tintel2023-08-03
| | | | | | | | | | | | | When building xdp-tools with CONFIG_USE_LLVM_HOST=y, on a host that enabled stack protector by default in Clang, compilation fails with the following error: CLANG xdp-dispatcher.o clang-16: error: ignoring '-fstack-protector-strong' option as it is not currently supported for target 'bpfeb' [-Werror,-Woption-ignored] Add -fno-stack-protector to BPF_CFLAGS to fix this. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* tools/ccache: update to 4.8.2Nick Hainke2023-08-02
| | | | | | | | | | Release Notes: https://ccache.dev/releasenotes.html#_ccache_4_8_2 Refresh patch: - 100-honour-copts.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* mvebu: add kernel 6.1 as testing kernelStefan Kalscheuer2023-08-02
| | | | | | | | | | With an initial set of patches and configs in place let's start testing with kernel 6.1. Run-tested on the cortexa9 subtarget (WRT1900ACS, Turris Omnia) Tested-by: Etienne Champetier <champetier.etienne@gmail.com> Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* mvebu: copy 5.15 kconfigs to 6.1Stefan Kalscheuer2023-08-02
| | | | | | Start 6.1 migration with a full copy of the current stable config. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* mvebu: refresh patches for 6.1Stefan Kalscheuer2023-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the following patches: 100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to [1] 101-ARM-dts-turris-omnia-enable-LED-controller-node [2] 702-net-next-ethernet-marvell-mvnetaMQPrioOffload [3] 703-net-next-ethernet-marvell-mvnetaMQPrioFlag [4] 704-net-next-ethernet-marvell-mvnetaMQPrioQueue [5] 705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload [6] 710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi [7] Manually rebased: 902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU All other patches automatically rebased [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=94a29bffdd59498382131fd428fed221f5c96def [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=40624346b7ae0c2b1209fc9993ea30699e512c50 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=75fa71e3acadbb4ab5eda18505277eb9a1f69b23 [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e7ca75fe6662f78bfeb0112671c812e4c7b8e214 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e9f7099d0730341b24c057acbf545dd019581db6 [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2551dc9e398c37a15e52122d385c29a8b06be45f [7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cd1e1735aeab49abc679218a79ee764c0d394880 Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* mvebu: copy 5.15 patches to 6.1Stefan Kalscheuer2023-08-02
| | | | | | To start migration to Kernel 6.1 we copy all existing patches from 5.15. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* tools/cmake: update to 3.27.1Rosen Penev2023-08-02
| | | | | | Fix zstd linking again. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* hostapd: fix undeclared variable in common.ucFelix Fietkau2023-08-02
| | | | | Fixes: https://github.com/openwrt/openwrt/issues/13210 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix mesh supplicant build errorFelix Fietkau2023-08-01
| | | | | | | Include AP ucode source file Fixes: e56c5f7b276a ("hostapd: add ucode support, use ucode for the main ubus object") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tracecmd: update to v3.2Nick Hainke2023-08-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ChangeLog: 46952ef trace-cmd: Version 3.2 f5871a1 libtracecmd: Version 1.4.0 d498af1 trace-cmd build: Add trace-attach.c to meson build 736df06 trace-cmd: Add initial support for meson e183566 libtracecmd: Add initial support for meson c508713 trace-cmd test: Quiet valgrind from reporting forked children 8ec026f trace-cmd test: Close handle after opening 4c179a6 trace-cmd library: Fix memory leaks of followers aa21520 trace-cmd: Add Makefile target for memory test 925e15f trace-cmd and library: Update the version to the development 4fa31c0 trace-cmd attach: Add new command "attach" 7e721ef trace-cmd library: Add tracecmd_get_tsc2nsec() API 8908555 tracecmd library: Unlock records in tracecmd_iterate_events() 2668b13 trace-cmd agent: Add "IP" to -N argument in help message 22ad81e trace-cmd record: Remove redundant check of instance in allocate_instance() d7ce897 libtracecmd: Free buf_from in error path of tracecmd_compress_copy_from() 6776d7a trace-cmd: Update v7 trace.dat documentation to clarify the strings section 9d6f3ba trace-cmd record/extract: Do not destroy existing instances 9c9d5ed trace-cmd extract: Do not extract top level unless told to 4b92132 libtracecmd: Fix tracecmd_compress_copy_from() write size return f30abfd documentation: trace-cmd-report: Document filter scope 7a390c5 trace-cmd-report: Support global filters 04ad2c6 trace-cmd report: Ensure filter is applied to single input file edf9424 trace-cmd: Open code execvp routine to avoid multiple execve syscalls Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtracefs: update to 1.7.0Nick Hainke2023-08-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ChangeLog: aebab37 libtracefs: version 1.7 a3237c3 libtracefs: Add initial support for meson b25019f libtarcefs doc: Add tracefs_kprobe_destroy() to index man page 4c2194f libtracefs doc: State that tracefs_dynevent_create() is needed for tracefs_kprobe_alloc() df53d43 libtracefs Documentation: Add missing prototypes in top level man page 9a2df4a libtracefs: Update version to 1.7.dev 18ede68 libtracefs: Add tracefs_kprobe_destory() API 309b1ba libtracefs tests: Add helper function to destroy dynamic events 53dce80 tracefs: Add tracefs_time_conversion() API 5ea4128 libtracefs: Add tracefs_find_cid_pid() API 857dd3e libtracefs/utest: Fix crashing of synth test when synths exist 6332309 libtracefs/utest: Do not use synth for test_synth element 25cd206 libtracefs: Clarify the tracefs_synth_create() man page 6b6d43f libtracefs: Do not allow tracefs_synth_set_instance() on created synth c860f93 libtracefs: Documentation for tracefs_synth_set_instance 0039173 libtracefs: New API to set synthetic event instance e97c311 libtracefs: Do not segfault in tests if synthetic events are not configured 185019c libtracefs: Add tracefs_instance_tracers() API 6775d23 libtracefs: Do not use hwlat tracer and fdb_delete event for tests 5a1a01e libtracefs: Add stacktrace to tracefs_sql() b1b234e libtracefs: Unit test for tracefs_instance_reset() dd620f4 libtracefs: Documentation for tracefs_instance_reset() 789e82d libtracefs: New API to reset ftrace instance Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtraceevent: update to 1.7.3Nick Hainke2023-08-01
| | | | | | | | | | ChangeLog: dd14818 libtraceevent: version 1.7.3 0b9a34e libtraceevent: Handle printf '%+d" case eba4a41 libtraceevent: Add initial support for meson 1d8ddb9 libtraceevent: Handle %c Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/7z: update to 23.01Nick Hainke2023-08-01
| | | | | | | | | | | | | Release Notes: https://sourceforge.net/p/sevenzip/discussion/45797/thread/3f550826d8/#e950 Manually adjust: - 7-zip-flags.patch Automatically refresh: - 7-zip-musl.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* netifd: update to the latest versionFelix Fietkau2023-08-01
| | | | | | | 8c2758b4fbbb wireless: add support for replacing data blobs at runtime 0ff22a6a68ce wireless: enable dynamic reconfiguration by default Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add ucode support, use ucode for the main ubus objectFelix Fietkau2023-08-01
| | | | | | | | This implements vastly improved dynamic configuration reload support. It can handle configuration changes on individual wifi interfaces, as well as adding/removing interfaces. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: switch to using uloop (integrated with built-in eloop)Felix Fietkau2023-08-01
| | | | | | Preparation for pulling in more code that uses uloop Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for querying assoc/probe IEsFelix Fietkau2023-08-01
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add experimental radius serverFelix Fietkau2023-08-01
| | | | | | | | This can be used to run a standalone EAP server that can be used from other APs. It uses json as user database format and can automatically handle reload. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01862Michał Kwiatek2023-07-31
| | | | | | | | | | | | Changelog from quic: Bug fixes, stability improvements from previous releases are present. There are no backward comatibility issues with this release. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600 Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
* uboot-mediatek: fix build for MT7629Daniel Golle2023-07-31
| | | | | | | | Add patch to fix build failure caused by a missing header which had previously been implicitely included. Fixes: 6ddb5f5a65 ("uboot-mediatek: update to version 2023.07.02") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: enable driver for MediaTek XS-PHYDaniel Golle2023-07-31
| | | | | | | Enable driver for MediaTek SuperSpeedPlus XS-PHY transceiver for the USB3.1 GEN2 controllers found in the MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add missing 'memory' nodes to downstream boardsDaniel Golle2023-07-31
| | | | | | | | | | Among the patches adding support for MT7988 also came the switch to use fdtdec_setup_mem_size_base() and no longer rely on CFG_SYS_SDRAM_BASE. Take care of our downstream boards which did not have a 'memory' node in their device trees. Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qualcommax: ipq807x: fix Gen2 PCIe portRobert Marko2023-07-31
| | | | | | | | | | | | | | Gen2 PCIe port recently got broken on IPQ807x during update to 6.1.39 as upstream backported: ("PCI: qcom: Remove PCIE20_ prefix from register definitions") [1] So, fix it by adding a pending upstream fix for it [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/pci/controller/dwc/pcie-qcom.c?h=v6.1.39&id=db962c7a711c3393a80a18219960cd54fb33c53d [2] https://patchwork.kernel.org/project/linux-arm-msm/patch/20230724063429.3980462-1-quic_srichara@quicinc.com/ Fixes: fec22f8375b4 ("kernel: bump 6.1 to 6.1.39") Signed-off-by: Robert Marko <robimarko@gmail.com>
* arm-trusted-firmware-mediatek: fix PKG_MIRROR_HASHDaniel Golle2023-07-31
| | | | | | | | | | Instead of using the hash of the Github-generated tarball use the hash of the tarball generated by the OpenWrt build system (in this case they are different, unfortunately). Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: 07dbeb430e ("arm-trusted-firmware-mediatek: update to sources of 2023-07-24") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 6.1 to 6.1.42John Audia2023-07-30
| | | | | | | | | | | | | | | Manually rebased: generic/pending-6.1/203-kallsyms_uncompressed.patch All other patches automatically rebased. Changelog: https://lore.kernel.org/stable/2023072749-gumming-selector-a081@gregkh/ Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: netsupport: Add kmod-sched-skbprioAlexandru Gagniuc2023-07-30
| | | | | | | | Add support for the SKBPRIO queuing discipline. This is subtly different than prio as it also drops packets from the lower priority flows. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
* kernel: bump 5.15 to 5.15.123John Audia2023-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*] Removed upstreamed: backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2] pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3] pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4] bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5] bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499 Build system: x86/64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Audia <therealgraysky@proton.me> [rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rtl8812au-ct: fix even more compilation error with kernel 6.1Christian Marangi2023-07-30
| | | | | | | | | | | | | | | Fix more compilation error with kernel 6.1 and make it possible to compile. Multiple fix are done due to kernel bump: - PDE_DATA (now deprecated) to pde_data - dev_addr now const and require some cast - prandom_u32 (now deprecated) to get_random_u32 Also other minor fix for always true condition and tasklet type cast not compatible. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: mt7621-wdt: use phandle to access system controller registersShiji Yang2023-07-30
| | | | | | | | | | | | | These patches allow the driver to access some watchdog registers via a phandle to the system controller node[1]. To apply these changes, we need to add "mediatek,sysctl" to the SoC dtsi. This commit also remove the redundent clocks, interrupts and resets properties. [1] https://lore.kernel.org/all/20230214103936.1061078-2-sergio.paracuellos@gmail.com Tested on Motorola MWR03 (MT7628) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for legacy SoCsShiji Yang2023-07-30
| | | | | | | | | | | | | | | | | | | | This series of upstream patches properly implement a clock and reset driver for old ralink SoCs[1]. And it includes some related fixes[2] and improvements[3][4]. All patches have been merged into linux-next. They will be part of upcoming Linux 6.5. In order to switch to the new system controller driver, all clocks and resets properties in SoC dtsi have been updated, and kernel symbol "CONFIG_CLK_MTMIPS" have been added to the kernel config files. [1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/all/20230622-mips-ralink-clk-wuninitialized-v1-1-ea9041240d10@kernel.org [3] https://lore.kernel.org/all/OSYP286MB03120BABB25900E113ED42B7BC5CA@OSYP286MB0312.JPNP286.PROD.OUTLOOK.COM [4] https://lore.kernel.org/all/TYAP286MB03151148AF8C054621DD55C3BC23A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Tested on Motorola MWR03 (MT7628) Tested on Haier HW-L1W (MT7620) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for mt7621Shiji Yang2023-07-30
| | | | | | | | | | | | | | | | | This series of upstream patches makes the system controller node as a reset provider[1][2], and it also includes some clock and reset driver fixes[3][4]. Meanwhile, all clocks and resets properties in the SoC device tree have been updated to be compatible with the new driver. [1] https://lore.kernel.org/r/20220110114930.1406665-2-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/r/20220210094859.927868-2-sergio.paracuellos@gmail.com [3] https://lore.kernel.org/r/20221217074806.3225150-1-sergio.paracuellos@gmail.com [4] https://lore.kernel.org/r/20230206083305.147582-1-sergio.paracuellos@gmail.com Tested on RAISECOM MSG1500 X.00 Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* toolchain: gcc: updat to 13.2Nick Hainke2023-07-30
| | | | | | | | | | | | | | | Release Notes: https://gcc.gnu.org/pipermail/gcc/2023-July/242148.html Remove upstreamed patches: - patches-13.x/001-rtl-optimization-109585-alias-analysis-typo.patch - patches-13.x/700-RISCV-Inline-subword-atomic-ops.patch - patches-13.x/701-riscv-linux-Don-t-add-latomic-with-pthread.patch Refresh patches: - patches-13.x/10-mbsd_multi.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* urngd: fix archived tar hashRafał Miłecki2023-07-30
| | | | | | | | | Due to some hiccup my local urngd-2023-07-25-7aefb47b.tar.xz ended up being different from archived one. Repackaging it locally confirmed the previous hash was incorrect. Fixes: c74b5e09e692 ("urngd: update to the latest master") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport proper fix for mtd preventing devices probingRafał Miłecki2023-07-30
| | | | | | | | | | Improper of_platform_populate() call caused issue with probing devices drivers. Fixes: 41e1e838fbbb ("kernel: backport mtd patch adding of_platform_populate() calls") Fixes: #10232 Ref: 79af0593a30b ("kernel: switch back 5.15 to fw_devlink=permissive") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport more DT changes queued for v6.6Rafał Miłecki2023-07-29
| | | | | | Those sort out BCM53573 Ethernet info finally. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: pinctrl: support requesting different functions for same groupShiji Yang2023-07-29
| | | | | | | | | | MT7620 wireless radio needs change the pin group function between "gpio" and "pa" during the calibration process. However, ralink pinctrl driver doesn't support requesting different functions for the same group. This patch enables pinctrl consumers to perform such operations. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mac80211: rework MT7620 PA/LNA RF calibrationShiji Yang2023-07-29
| | | | | | | | | | | | | | | This patch makes some improvements to the MT7620 RF calibration. 1. Move MT7620 PA/LNA calibration code to dedicated functions. 2. Restore RF and BBP registers before R-Calibration. 3. Do Rx DCOC calibration again before RXIQ calibration. 4. Use SoC specific AGC initial LNA value. 5. Correct MAC_RX_EN mask in rt2800_r_calibration()[1]. [1] This change may fix the "BBP/RF register access failed" error: ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* uboot-mediatek: add patches for MT7988 and builds for RFBDaniel Golle2023-07-29
| | | | | | | Import pending patches adding support for MT7988 and provide builds for the reference board for all possible boot media. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to version 2023.07.02Daniel Golle2023-07-29
| | | | | | | | | | Release 2023.07 got tagged wrongly and replaced by follow-up release 2023.07.02. Now using upstream DTS for BPi-R3. Removed two patches which made it upstream, refreshed the rest. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to sources of 2023-07-24Daniel Golle2023-07-29
| | | | | | | | Use updated Trusted Firmware-A sources from MediaTek, now stacked on top of the ARM Trusted Firmware-A v2.9 release. Add builds for the newly added MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-tools: update to version 2.9Daniel Golle2023-07-29
| | | | | | | | | | | | | | | | | | 147f52f3e feat(fiptool): add cca, core_swd, plat cert in FIP 0aaa382fe fix(sptool): fix concurrency issue for SP packages cb666b39d Merge "fix(sptool): fix concurrency issue for SP packages" into integration 0be2475f6 fix: 'sp_mk_generator.py' reference to undef var 1a28f290b fix(sptool): operators "is/is not" in sp_mk_gen.py cf2dd17dd refactor(security): add OpenSSL 1.x compatibility 4daeaf341 fix(sptool): add dependency to SP image 06e69f7c9 feat(fiptool): handle FIP in a disk partition 5a53c6c66 Merge "feat(fiptool): handle FIP in a disk partition" into integration 034a2e3ef refactor(fiptool): move plat_fiptool.mk to tools 0165ddd7c build(fiptool): add object dependency generation c89fdb4a5 Merge "refactor(fiptool): move plat_fiptool.mk to tools" into integration 1b491eead fix(tree): correct some typos Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mvebu: update to version 2023.07.02Oli Ze2023-07-29
| | | | | | | | | | | | Since 2021.07 multiple bugs were introduced that made it impossible to create a bootable target for mvebu. Those issues should be now fixed since 2023.07-rc1. References: #11661 Signed-off-by: Oli Ze <olze@trustserv.de> Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Andre Heider <a.heider@gmail.com> # espressobin-v3-v5-1gb-2cs Signed-off-by: Petr Štetiar <ynezz@true.cz> [facelift]
* ramips: use NVMEM cells with mt76 EEPROM for Netgear R6220 & WNDR3700 v5Rafał Miłecki2023-07-28
| | | | | | | This uses new upstream DT binding. It's more generic (NVMEM) compared to the old one (MTD). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: use fixed layout cell "mac-base" for Netgear WNDR3700 v5Rafał Miłecki2023-07-28
| | | | | | This drops a use of downstream "mac-address-increment". Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: replace "mac-address-ascii" with "mac-base"Rafał Miłecki2023-07-28
| | | | | | | With upstream accepted "mac-base" binding there is no need for a downstream "mac-address-ascii" workaround anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Powered by cgit, Themed by Ted Yin.