1 files changed, 134 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch b/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch
new file mode 100644
index 0000000000..280fc5957e
--- /dev/null
+++ b/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch
@@ -0,0 +1,134 @@
+--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
++++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+@@ -31,6 +31,7 @@
+ 
+ 	chosen {
+ 		stdout-path = "serial0:115200n8";
++		append-rootblock = "nullparameter="; /* override the bootloader args */
+ 	};
+ 
+ 	memory@0 {
+@@ -94,6 +95,8 @@
+ 			       status = "okay";
+ 			       phy = <&phy1>;
+ 			       phy-mode = "sgmii";
++		               nvmem-cells = <&macaddr_vendor_0>;
++        		       nvmem-cell-names = "mac-address";
+ 			};
+ 
+ 			sata@a0000 {
+@@ -175,6 +178,24 @@
+ 			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ 		};
+ 	};
++
++	virtual_flash {
++		compatible = "mtd-concat";
++
++		devices = <&mtd_kernel &mtd_gap &mtd_gap2>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				compatible = "openwrt,uimage", "denx,uimage";
++				label = "firmware";
++				reg = <0x0 0x0>;
++			};
++		};
++	};
+ };
+ 
+ &mdio {
+@@ -265,48 +286,52 @@
+ 		reg = <0>; /* Chip select 0 */
+ 		spi-max-frequency = <20000000>;
+ 
+-		/*
+-		 * Warning!
+-		 *
+-		 * Synology u-boot uses its compiled-in environment
+-		 * and it seems Synology did not care to change u-boot
+-		 * default configuration in order to allow saving a
+-		 * modified environment at a sensible location. So,
+-		 * if you do a 'saveenv' under u-boot, your modified
+-		 * environment will be saved at 1MB after the start
+-		 * of the flash, i.e. in the middle of the uImage.
+-		 * For that reason, it is strongly advised not to
+-		 * change the default environment, unless you know
+-		 * what you are doing.
+-		 */
+-		partition@0 { /* u-boot */
+-			label = "RedBoot";
+-			reg = <0x00000000 0x000c0000>; /* 768KB */
+-		};
++		partitions {
++			compatible = "fixed-partitions";
+ 
+-		partition@c0000 { /* uImage */
+-			label = "zImage";
+-			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+-		};
++			partition@0 { /* u-boot */
++				label = "u-boot";
++				reg = <0x00000000 0x000c0000>; /* 768KB */
++				read-only;
++			};
+ 
+-		partition@390000 { /* uInitramfs */
+-			label = "rd.gz";
+-			reg = <0x00390000 0x00440000>; /* 4250KB */
+-		};
++			mtd_gap: partition@c0000 { /* gap */
++				label = "gap";
++				reg = <0x000c0000 0x00040000>; /* 256KB */
++			};
+ 
+-		partition@7d0000 { /* MAC address and serial number */
+-			label = "vendor";
+-			reg = <0x007d0000 0x00010000>; /* 64KB */
+-		};
++			partition@100000 { /* u-boot-env */
++				label = "u-boot-env";
++				reg = <0x00100000 0x00010000>; /* 64KB */
++			};
+ 
+-		partition@7e0000 {
+-			label = "RedBoot config";
+-			reg = <0x007e0000 0x00010000>; /* 64KB */
+-		};
++			mtd_kernel: partition@110000 {
++				label = "kernel";
++				reg = <0x00110000 0x006c0000>; /* 6912KB */
++			};
+ 
+-		partition@7f0000 {
+-			label = "FIS directory";
+-			reg = <0x007f0000 0x00010000>; /* 64KB */
++			partition@7d0000 { /* MAC address and serial number */
++				reg = <0x007d0000 0x00010000>; /* 64KB */
++				label = "vendor";
++				read-only;
++
++				compatible = "nvmem-cells";
++
++				nvmem-layout {
++					compatible = "fixed-layout";
++					#address-cells = <1>;
++					#size-cells = <1>;
++
++					macaddr_vendor_0: macaddr@0 {
++						reg = <0x0 0x6>;
++					};
++				};
++			};
++
++			mtd_gap2: partition@7e0000 {
++				label = "gap2";
++				reg = <0x007e0000 0x00020000>; /* 128KB */
++			};
+ 		};
+ 	};
+ };