1 files changed, 73 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-rutx10.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-rutx10.dts
new file mode 100644
index 0000000000..8fc976a11b
--- /dev/null
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-rutx10.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4018-rutx.dtsi"
+
+/ {
+	model = "Teltonika RUTX10";
+	compatible = "teltonika,rutx10";
+
+	soc {
+		leds {
+			compatible = "gpio-leds";
+
+			wifi2g {
+				label = "green:wifi2g";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy0tpt";
+			};
+
+			wifi5g {
+				label = "green:wifi5g";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy1tpt";
+			};
+		};
+
+		gpio_export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out {
+				gpio-export,name = "gpio_out";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change = <0>;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in {
+				gpio-export,name = "gpio_in";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change = <0>;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	stm32_io: stm32@74 {
+		compatible = "tlt,stm32v1";
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&tlmm>;
+		interrupts = <5 2>;
+		reg = <0x74>;
+	};
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
+};