diff options
Diffstat (limited to 'target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts')
| -rw-r--r-- | target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts new file mode 100644 index 0000000000..32f0473fb1 --- /dev/null +++ b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "ASUS Lyra MAP-AC2200"; + compatible = "asus,map-ac2200"; + + aliases { + led-boot = &led_blue0; + led-failsafe = &led_red0; + led-running = &led_blue0; + led-upgrade = &led_red0; + ethernet1 = &swport4; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = <TCSR_ESS_PSGMII>; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; + }; + + usb2@60f8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "MIBIB"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "QSEE"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "CDT"; + reg = <0x200000 0x80000>; + read-only; + }; + + partition@280000 { + label = "APPSBL"; + reg = <0x280000 0x140000>; + read-only; + }; + + partition@3c0000 { + label = "APPSBLENV"; + reg = <0x3c0000 0x40000>; + read-only; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; + +&tlmm { + i2c_0_pins: i2c_0_pinmux { + pinmux { + function = "blsp_i2c0"; + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio52", "gpio53", "gpio58", + "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + enable_ext_pa_high { + gpio-hog; + gpios = <44 GPIO_ACTIVE_HIGH>, + <46 GPIO_ACTIVE_HIGH>; + output-high; + bias-pull-down; + line-name = "enable external PA output-high"; + }; + enable_ext_pa_low { + gpio-hog; + gpios = <45 GPIO_ACTIVE_HIGH>, + <47 GPIO_ACTIVE_HIGH>; + output-low; + bias-pull-down; + line-name = "enable external PA output-low"; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; + ieee80211-freq-limit = <5470000 5875000>; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; + ieee80211-freq-limit = <5170000 5350000>; + }; + }; +}; + +&usb2_hs_phy { + /* Bluetooth module attached via USB */ + status = "okay"; +}; + +&blsp1_i2c3 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + led-controller@32 { + /* 9-channel RGB LED controller */ + compatible = "national,lp5523"; + reg = <0x32>; + clock-mode = /bits/ 8 <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * There is only one single extremely bright RGB-LED. + * The RGB-color channels are running in parallel to + * increase the current delivery capabilities beyond + * what a single PWM-output of the controller can do. + */ + + led_blue0: led@0 { + chan-name = "blue-0"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <0>; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <0>; + }; + + led@1 { + chan-name = "blue-1"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <1>; + }; + + led@2 { + chan-name = "blue-2"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <2>; + }; + + led_green0: led@3 { + chan-name = "green-0"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <0>; + }; + + led@4 { + chan-name = "green-1"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <1>; + }; + + led@5 { + chan-name = "green-2"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <5>; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <2>; + }; + + led_red0: led@6 { + chan-name = "red-0"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <6>; + color = <LED_COLOR_ID_RED>; + function-enumerator = <0>; + }; + + led@7 { + chan-name = "red-1"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <7>; + color = <LED_COLOR_ID_RED>; + function-enumerator = <1>; + }; + + led@8 { + chan-name = "red-2"; + led-cur = /bits/ 8 <0xfa>; + max-cur = /bits/ 8 <0xff>; + reg = <8>; + color = <LED_COLOR_ID_RED>; + function-enumerator = <2>; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gmac { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport4 { + status = "okay"; + + label = "wan"; +}; + +&swport5 { + status = "okay"; + + label = "lan"; +}; |