diff options
6 files changed, 379 insertions, 0 deletions
diff --git a/target/linux/mediatek/dts/mt7981b-unielec-u7981-01-emmc.dts b/target/linux/mediatek/dts/mt7981b-unielec-u7981-01-emmc.dts new file mode 100644 index 0000000000..abd4d4e59d --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-unielec-u7981-01-emmc.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 Allen Zhao <allenzhao@unielecinc.com> + */ + +/dts-v1/; +#include "mt7981b-unielec-u7981-01.dtsi" +/ { + model = "Unielec U7981-01 (EMMC)"; + compatible = "unielec,u7981-01-emmc", "mediatek,mt7981"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; + + card@0 { + compatible = "mmc-card"; + reg = <0>; + + block { + compatible = "block-device"; + partitions { + block-partition-env { + partname = "u-boot-env"; + + nvmem-layout { + compatible = "u-boot,env-layout"; + }; + }; + + block-partition-factory { + partname = "factory"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_1000: macaddr@1000 { + compatible = "mac-base"; + reg = <0x1000 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; + }; +}; + +&pio { + mmc0_pins_default: mmc0-pins-default { + mux { + function = "flash"; + groups = "emmc_45"; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + mux { + function = "flash"; + groups = "emmc_45"; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_1000 0>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&macaddr_factory_1000 1>; + nvmem-cell-names = "mac-address"; +}; + +&wifi { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; diff --git a/target/linux/mediatek/dts/mt7981b-unielec-u7981-01-nand.dts b/target/linux/mediatek/dts/mt7981b-unielec-u7981-01-nand.dts new file mode 100644 index 0000000000..230a612a34 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-unielec-u7981-01-nand.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 Allen Zhao <allenzhao@unielecinc.com> + */ + +/dts-v1/; +#include "mt7981b-unielec-u7981-01.dtsi" +/ { + model = "Unielec U7981-01 (NAND)"; + compatible = "unielec,u7981-01-nand", "mediatek,mt7981"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + spi_nand: spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x0100000 0x0080000>; + }; + + factory: partition@180000 { + label = "factory"; + reg = <0x180000 0x200000>; + read-only; + + compatible = "nvmem-cells"; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_1000: macaddr@1000 { + compatible = "mac-base"; + reg = <0x1000 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x0200000>; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x4000000>; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_1000 0>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&macaddr_factory_1000 1>; + nvmem-cell-names = "mac-address"; +}; + +&wifi { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; diff --git a/target/linux/mediatek/dts/mt7981b-unielec-u7981-01.dtsi b/target/linux/mediatek/dts/mt7981b-unielec-u7981-01.dtsi new file mode 100644 index 0000000000..6e6150ba21 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-unielec-u7981-01.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 Allen Zhao <allenzhao@unielecinc.com> + */ + +/dts-v1/; +#include "mt7981.dtsi" +/ { + model = "Unielec U7981-01 (EMMC)"; + compatible = "unielec,u7981-01-emmc", "mediatek,mt7981"; + + chosen { + bootargs = "console=ttyS0,115200n1 loglevel=8 \ + earlycon=uart8250,mmio32,0x11002000 \ + "; + }; + + gpio-keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins &gbe_led0_pins &gbe_led1_pins>; + status = "okay"; + + gmac0: mac@0 { + /* LAN */ + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + /* WAN */ + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&xhci { + mediatek,u3p-dis-msk = <0x0>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 8e4fd8003c..5b8b910f62 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -26,6 +26,7 @@ mediatek_setup_interfaces() asus,tuf-ax4200|\ jdcloud,re-cp-03|\ mediatek,mt7981-rfb|\ + unielec,u7981-01*|\ zbtlink,zbt-z8102ax) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 ;; diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 4df4370f0f..389c177fb9 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -164,6 +164,23 @@ platform_do_upgrade() { CI_ROOTPART="ubi_rootfs" nand_do_upgrade "$1" ;; + unielec,u7981-01*) + local rootdev="$(cmdline_get_var root)" + rootdev="${rootdev##*/}" + rootdev="${rootdev%p[0-9]*}" + case "$rootdev" in + mmc*) + CI_ROOTDEV="$rootdev" + CI_KERNPART="kernel" + CI_ROOTPART="rootfs" + emmc_do_upgrade "$1" + ;; + *) + CI_KERNPART="fit" + nand_do_upgrade "$1" + ;; + esac + ;; *) nand_do_upgrade "$1" ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 7d2fac56b6..e3b588c861 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -913,6 +913,28 @@ define Device/ubnt_unifi-6-plus endef TARGET_DEVICES += ubnt_unifi-6-plus +define Device/unielec_u7981-01 + DEVICE_VENDOR := Unielec + DEVICE_MODEL := U7981-01 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs fdisk partx-utils + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef + +define Device/unielec_u7981-01-emmc + DEVICE_DTS := mt7981b-unielec-u7981-01-emmc + DEVICE_VARIANT := (EMMC) + $(call Device/unielec_u7981-01) +endef +TARGET_DEVICES += unielec_u7981-01-emmc + +define Device/unielec_u7981-01-nand + DEVICE_DTS := mt7981b-unielec-u7981-01-nand + DEVICE_VARIANT := (NAND) + $(call Device/unielec_u7981-01) +endef +TARGET_DEVICES += unielec_u7981-01-nand + define Device/xiaomi_mi-router-ax3000t DEVICE_VENDOR := Xiaomi DEVICE_MODEL := Mi Router AX3000T |