diff options
| -rw-r--r-- | target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi | 158 |
1 files changed, 136 insertions, 22 deletions
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi index df9425b12a..737e7365a6 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi @@ -1,9 +1,10 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qcom-ipq4019-ap.dk01.1.dtsi" +#include "qcom-ipq4019.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> / { memory { @@ -11,28 +12,39 @@ reg = <0x80000000 0x10000000>; }; + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { - pinctrl@1000000 { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio58", "gpio59"; - function = "blsp_i2c0"; - bias-disable; - }; - }; + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; + }; + + tcsr@194b000 { + status = "okay"; + + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = <TCSR_ESS_PSGMII>; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; }; keys { @@ -47,9 +59,91 @@ }; }; +&prng { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio54"; + }; + pinconf { + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + mux { + pins = "gpio58", "gpio59"; + function = "blsp_i2c0"; + bias-disable; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>; num-cs = <2>; + status = "okay"; xt25f128b@0 { /* @@ -208,3 +302,23 @@ pinctrl-names = "default"; phy-reset-gpio = <&tlmm 62 0>; }; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; |