diff options
| author | Daniel Golle <daniel@makrotopia.org> | 2024-03-17 15:55:09 +0000 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2024-03-17 19:37:14 +0000 |
| commit | fc177695e00e80afd30d20d29f6e915edc9e9eb9 (patch) | |
| tree | 0c18ba745cd1c8c144409ffa8e6b47a9c4c2703d /target/linux/mvebu | |
| parent | 7ac030876cba4d84729fb5be8796fd5b2a05855f (diff) | |
mvebu: enable thermal zone polling for IEI Puzzle devices
Marvell's thermal sensors do not support interrupts, so we need to
poll them. Reading temperature every second should be enough to
control the fan.
While at it, also make sure fan speed is reduced again if temperature
goes down.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/mvebu')
| -rw-r--r-- | target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi index 94677532f2..a8ce8fd102 100644 --- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi @@ -1,4 +1,7 @@ #define PUZZLE_FAN_THERMAL(_cname, _fan) \ + polling-delay-passive = <500>; \ + polling-delay = <1000>; \ + \ trips { \ _cname##_active_high: cpu-active-high { \ temperature = <80000>; \ @@ -28,14 +31,14 @@ }; \ cpu-active-med { \ trip = <&_cname##_active_med>; \ - cooling-device = <_fan 2 THERMAL_NO_LIMIT>; \ + cooling-device = <_fan 2 3>; \ }; \ cpu-active-low { \ trip = <&_cname##_active_low>; \ - cooling-device = <_fan 1 THERMAL_NO_LIMIT>; \ + cooling-device = <_fan 1 2>; \ }; \ cpu-active-idle { \ trip = <&_cname##_active_idle>; \ - cooling-device = <_fan 0 THERMAL_NO_LIMIT>; \ + cooling-device = <_fan 0 0>; \ }; \ } |