diff options
| author | Jianhui Zhao <zhaojh329@gmail.com> | 2023-09-24 22:34:12 +0800 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2023-09-29 00:18:26 +0100 |
| commit | fe10f9743935d6986e80e7cb082469e6bc5a03f0 (patch) | |
| tree | 6f3bd6fcb9135640e2895a0b5453ab442c0aca5b /target/linux/mediatek/image/filogic.mk | |
| parent | e3aa645b267ca4f08773b5366583e9b0020fc3e9 (diff) | |
filogic: add support for GL.iNet GL-MT6000
Hardware specification:
* SoC: MediaTek MT7986A 4x A53
* Flash: 8GB EMMC
* RAM: 1GB DDR4
* Ethernet:
* 2x2.5G RJ45 port (RTL8221B)
* 4x1G RJ45 ports (MT7531AE)
* WLAN:
* 2.4GHz: MT7976GN 4T4R
* 5GHz: MT7976AN 4T4R
* Button: Reset
* LED: 1 x dual color LED
* USB: 1 x USB 3.0
* Power: DC 12V 4A
* UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC)
* JTAG: 9 PIN
If you want to use u-boot from OpenWrt, you can upgrade it safely.
* bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
* fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip
`openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot.
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Diffstat (limited to 'target/linux/mediatek/image/filogic.mk')
| -rw-r--r-- | target/linux/mediatek/image/filogic.mk | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index c9cf30b1ce..6082cf5f47 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -239,6 +239,21 @@ define Device/glinet_gl-mt3000 endef TARGET_DEVICES += glinet_gl-mt3000 +define Device/glinet_gl-mt6000 + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-MT6000 + DEVICE_DTS := mt7986a-glinet-gl-mt6000 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-usb2 kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs + IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4 + ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000 +endef +TARGET_DEVICES += glinet_gl-mt6000 + define Device/h3c_magic-nx30-pro DEVICE_VENDOR := H3C DEVICE_MODEL := Magic NX30 Pro |