diff options
| author | Daniel González Cabanelas <dgcbueu@gmail.com> | 2023-06-18 21:34:59 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-19 20:39:52 +0200 |
| commit | 6cb3328b4fd4939f3800d4be9d52744b753de1b6 (patch) | |
| tree | e9c3e17faa437f0d0c00b4c7c59fe10319fc1abb /target/linux/bmips/bcm6328 | |
| parent | 6d1265b14850abaf8980e5cebef3e559b1fdcfb9 (diff) | |
bmips: add support for NuCom R5010UNv2
The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band
with two external antennas.
Hardware:
- SoC: Broadcom BCM6328
- CPU: single core BMIPS4350 V7.5 @ 320Mhz
- RAM: 64 MB DDR2
- Flash: 16 MB SPI NOR
- Ethernet LAN: 4x 100Mbit
- Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard)
- USB: 1x 2.0
- Buttons: 2x
- ADSL: yes, unsupported
- LEDs: 7x
- UART: yes
Installation via CFE web UI:
1. Power off the router and press the RESET button
2. Power on the router and wait 12 or more seconds
3. Release the RESET button
4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Diffstat (limited to 'target/linux/bmips/bcm6328')
3 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds index 5ece1f7ba1..5e80eb34e7 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds @@ -6,6 +6,7 @@ board_config_update case "$(board_name)" in +nucom,r5010unv2 |\ sercomm,ad1018) ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" ;; diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network index 66f9282e48..bfedad9e45 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network @@ -6,7 +6,8 @@ board_config_update case "$(board_name)" in comtrend,ar-5381u |\ -comtrend,ar-5387un) +comtrend,ar-5387un |\ +nucom,r5010unv2) ucidef_set_bridge_device switch ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; diff --git a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc index 21f18b4b81..2056ea017f 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc @@ -4,7 +4,8 @@ case "$(board_name)" in comtrend,ar-5381u |\ -comtrend,ar-5387un) +comtrend,ar-5387un |\ +nucom,r5010unv2) mtd fixtrx firmware ;; esac |