// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include "ipq8074.dtsi" #include "ipq8074-hk-cpu.dtsi" #include "ipq8074-ess.dtsi" #include #include #include / { model = "Zbtlink ZBT-Z800AX"; compatible = "zbtlink,zbt-z800ax", "qcom,ipq8074"; aliases { led-boot = &led_net; led-failsafe = &led_net; led-upgrade = &led_net; serial0 = &blsp1_uart5; /* * Aliases as required by u-boot * to patch MAC addresses */ ethernet0 = &dp1; ethernet1 = &dp2; ethernet2 = &dp3; ethernet3 = &dp4; ethernet4 = &dp5; label-mac-device = &dp1; }; chosen { stdout-path = "serial0:115200n8"; bootargs-append = " root=/dev/ubiblock0_1"; }; gpio-export { compatible = "gpio-export"; lte-power { gpio-export,name = "lte_power"; gpio-export,output = <1>; gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; pinctrl-0 = <&button_pins>; pinctrl-names = "default"; reset { label = "reset"; linux,code = ; gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; }; wps { label = "wps"; linux,code = ; gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_net: net { color = ; function = LED_FUNCTION_WAN_ONLINE; gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; module { color = ; function = LED_FUNCTION_MOBILE; gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; }; wlan2g { color = ; function = LED_FUNCTION_WLAN_2GHZ; gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1radio"; }; wlan5g { color = ; function = LED_FUNCTION_WLAN_5GHZ; gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0radio"; }; }; }; &tlmm { button_pins: button-pins { mux { pins = "gpio34", "gpio46"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; }; mdio_pins: mdio-pins { mdc { pins = "gpio68"; function = "mdc"; drive-strength = <8>; bias-pull-up; }; mdio { pins = "gpio69"; function = "mdio"; drive-strength = <8>; bias-pull-up; }; }; }; &blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; cs-select = <0>; status = "okay"; flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "0:sbl1"; reg = <0x0 0x50000>; read-only; }; partition@50000 { label = "0:mibib"; reg = <0x50000 0x10000>; read-only; }; partition@60000 { label = "0:bootconfig"; reg = <0x60000 0x20000>; read-only; }; partition@80000 { label = "0:bootconfig1"; reg = <0x80000 0x20000>; read-only; }; partition@a0000 { label = "0:qsee"; reg = <0xa0000 0x180000>; read-only; }; partition@220000 { label = "0:qsee_1"; reg = <0x220000 0x180000>; read-only; }; partition@3a0000 { label = "0:devcfg"; reg = <0x3a0000 0x10000>; read-only; }; partition@3b0000 { label = "0:devcfg_1"; reg = <0x3b0000 0x10000>; read-only; }; partition@3c0000 { label = "0:apdp"; reg = <0x3c0000 0x10000>; read-only; }; partition@3d0000 { label = "0:apdp_1"; reg = <0x3d0000 0x10000>; read-only; }; partition@3e0000 { label = "0:rpm"; reg = <0x3e0000 0x40000>; read-only; }; partition@420000 { label = "0:rpm_1"; reg = <0x420000 0x40000>; read-only; }; partition@460000 { label = "0:cdt"; reg = <0x460000 0x10000>; read-only; }; partition@470000 { label = "0:cdt_1"; reg = <0x470000 0x10000>; read-only; }; partition@480000 { label = "0:appsblenv"; reg = <0x480000 0x10000>; }; partition@490000 { label = "0:appsbl"; reg = <0x490000 0xa0000>; read-only; }; partition@530000 { label = "0:appsbl_1"; reg = <0x530000 0xa0000>; read-only; }; partition@5d0000 { label = "0:art"; reg = <0x5d0000 0x40000>; read-only; }; partition@610000 { label = "0:ethphyfw"; reg = <0x610000 0x80000>; read-only; }; }; }; }; &blsp1_uart5 { status = "okay"; }; &cryptobam { status = "okay"; }; &crypto { status = "okay"; }; &prng { status = "okay"; }; &qpic_bam { status = "okay"; }; &qpic_nand { status = "okay"; partitions { status = "disabled"; }; nand@0 { reg = <0>; nand-ecc-strength = <8>; nand-ecc-step-size = <512>; nand-bus-width = <8>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "rootfs"; reg = <0x0000000 0x3400000>; }; partition@3400000 { label = "0:wififw"; reg = <0x3400000 0x0800000>; read-only; }; partition@3c00000 { label = "rootfs_1"; reg = <0x3c00000 0x3400000>; }; partition@7000000 { label = "0:wififw_1"; reg = <0x7000000 0x0800000>; read-only; }; }; }; }; &qusb_phy_0 { status = "okay"; }; &qusb_phy_1 { status = "okay"; }; &ssphy_0 { status = "okay"; }; &ssphy_1 { status = "okay"; }; &usb_0 { status = "okay"; }; &usb_1 { status = "okay"; }; &mdio { status = "okay"; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; ethernet-phy-package@0 { compatible = "qcom,qca8075-package"; #address-cells = <1>; #size-cells = <0>; reg = <0>; qca8075_0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; qca8075_1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; qca8075_2: ethernet-phy@2 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <2>; }; qca8075_3: ethernet-phy@3 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <3>; }; qca8075_4: ethernet-phy@4 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <4>; }; }; }; &switch { status = "okay"; switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; switch_wan_bmp = ; switch_mac_mode = ; qcom,port_phyinfo { port@1 { port_id = <1>; phy_address = <0>; }; port@2 { port_id = <2>; phy_address = <1>; }; port@3 { port_id = <3>; phy_address = <2>; }; port@4 { port_id = <4>; phy_address = <3>; }; port@5 { port_id = <5>; phy_address = <4>; }; }; }; &edma { status = "okay"; }; &dp1 { status = "okay"; phy-handle = <&qca8075_0>; label = "lan1"; }; &dp2 { status = "okay"; phy-handle = <&qca8075_1>; label = "lan2"; }; &dp3 { status = "okay"; phy-handle = <&qca8075_2>; label = "lan3"; }; &dp4 { status = "okay"; phy-handle = <&qca8075_3>; label = "lan4"; }; &dp5 { status = "okay"; phy-handle = <&qca8075_4>; label = "wan"; }; &wifi { status = "okay"; qcom,ath11k-calibration-variant = "ZBT-Z800AX"; };