// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/dts-v1/;

#include "ipq8074.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include "ipq8074-ess.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "Spectrum SAX1V1K";
	compatible = "spectrum,sax1v1k", "qcom,ipq8074";

	aliases {
		led-boot = &led_system_red;
		led-failsafe = &led_system_red;
		led-running = &led_system_blue;
		led-upgrade = &led_system_red;
		serial0 = &blsp1_uart5;
		/* Aliases as required by u-boot to patch MAC addresses */
		ethernet0 = &dp6_syn;
		ethernet1 = &dp4;
		ethernet2 = &dp3;
		ethernet3 = &dp2;
		label-mac-device = &dp6_syn;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_system_blue: system-blue {
			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_STATUS;
		};

		led_system_red: system-red {
			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_RED>;
			function = LED_FUNCTION_STATUS;
		};
	};
};

&tlmm {
	mdio_pins: mdio-pins {
		mdc {
			pins = "gpio68";
			function = "mdc";
			drive-strength = <8>;
			bias-pull-up;
		};

		mdio {
			pins = "gpio69";
			function = "mdio";
			drive-strength = <8>;
			bias-pull-up;
		};
	};
};

&blsp1_uart5 {
	status = "okay";
};

&prng {
	status = "okay";
};

&cryptobam {
	status = "okay";
};

&crypto {
	status = "okay";
};

&qpic_bam {
	status = "okay";
};

&mdio {
	pinctrl-0 = <&mdio_pins>;
	pinctrl-names = "default";
	reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
	status = "okay";

	ethernet-phy-package@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "qcom,qca8075-package";
		reg = <0>;

		qcom,package-mode = "qsgmii";

		qca8075_1: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <1>;
		};

		qca8075_2: ethernet-phy@2 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <2>;
		};

		qca8075_3: ethernet-phy@3 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <3>;
		};
	};

	qca8081: ethernet-phy@28 {
		compatible = "ethernet-phy-id004d.d101";
		reg = <28>;
		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
	};
};

&sdhc_1 {
	/* Following same rule as QNAP 301W
	 * the emmc has a problem with the hs400 > hs200 speed switch.
	 * Therefore remove the mmc-hs400-1_8v property
	*/
	/delete-property/ mmc-hs400-1_8v;
	mmc-hs200-1_8v;
	mmc-ddr-1_8v;
	vqmmc-supply = <&l11>;
	status = "okay";
};

&switch {
	switch_lan_bmp = <(ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
	switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
	switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
	switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
	status = "okay";

	qcom,port_phyinfo {
		port@2 {
			port_id = <2>;
			phy_address = <1>;
		};

		port@3 {
			port_id = <3>;
			phy_address = <2>;
		};

		port@4 {
			port_id = <4>;
			phy_address = <3>;
		};

		port@6 {
			port_id = <6>;
			phy_address = <28>;
			port_mac_sel = "QGMAC_PORT";
		};
	};
};

&edma {
	status = "okay";
};

&dp2 {
	phy-mode = "qsgmii";
	phy-handle = <&qca8075_1>;
	label = "lan3";
	status = "okay";
};

&dp3 {
	phy-mode = "qsgmii";
	phy-handle = <&qca8075_2>;
	label = "lan2";
	status = "okay";
};

&dp4 {
	phy-mode = "qsgmii";
	phy-handle = <&qca8075_3>;
	label = "lan1";
	status = "okay";
};

&dp6_syn {
	phy-handle = <&qca8081>;
	label = "wan";
	status = "okay";
};

&wifi {
	qcom,ath11k-calibration-variant = "Spectrum-SAX1V1K";
	status = "okay";
};