// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/dts-v1/;

#include "ipq6018.dtsi"
#include "ipq6018-cp-cpu.dtsi"
#include "ipq6018-ess.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "8devices Mango-DVK";
	compatible = "8devices,mango-dvk", "qcom,ipq6018";

	aliases {
		serial0 = &blsp1_uart3;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	keys {
		compatible = "gpio-keys";

		wps {
			label = "wps";
			gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		wlan5g {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_WLAN;
			function-enumerator = <0>;
			gpios = <&tlmm 66 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy0radio";
		};

		wlan2g {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_WLAN;
			function-enumerator = <1>;
			gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy1radio";
		};
	};
};

&tlmm {
	mdio_pins: mdio-pins {
		mdc {
			pins = "gpio64";
			function = "mdc";
			drive-strength = <8>;
			bias-pull-up;
		};

		mdio {
			pins = "gpio65";
			function = "mdio";
			drive-strength = <8>;
			bias-pull-up;
		};
	};

	spi_0_pins: spi-0-pins {
		pins = "gpio38", "gpio39", "gpio40", "gpio41";
		function = "blsp0_spi";
		drive-strength = <8>;
		bias-pull-down;
	};

	led_pins: led_pins {
		leds {
			pins = "gpio66", "gpio67";
			function = "gpio";
			drive-strength = <8>;
			bias-pull-down;
		};
	};

	sd_pins: sd_pins {
		sd_cd {
			 pins = "gpio62";
			 function = "gpio";
			 drive-strength = <8>;
			 bias-pull-up;
		};
	};
};

&blsp1_uart3 {
	pinctrl-0 = <&serial_3_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&blsp1_spi1 {
	pinctrl-0 = <&spi_0_pins>;
	pinctrl-names = "default";
	status = "okay";

	flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "0:SBL1";
				reg = <0x00000000 0x000c0000>;
			};

			partition@c0000 {
				label = "0:MIBIB";
				reg = <0x000c0000 0x00010000>;
			};

			partition@d0000 {
				label = "0:QSEE";
				reg = <0x000d0000 0x001a0000>;
			};

			partition@270000 {
				label = "0:DEVCFG";
				reg = <0x00270000 0x00010000>;
			};

			partition@280000 {
				label = "0:RPM";
				reg = <0x00280000 0x00020000>;
			};

			partition@2a0000 {
				label = "0:CDT";
				reg = <0x002a0000 0x00010000>;
			};

			partition@2b0000 {
				label = "0:APPSBLENV";
				reg = <0x002b0000 0x00010000>;
			};

			partition@2c0000 {
				label = "0:APPSBL";
				reg = <0x002c0000 0x000a0000>;
			};

			partition@360000 {
				compatible = "nvmem-cells";
				#address-cells = <1>;
				#size-cells = <1>;
				label = "0:ART";
				reg = <0x00360000 0x00040000>;

				macaddr_eth0: macaddr@0 {
					reg = <0x0 0x6>;
				};

				macaddr_eth1: macaddr@6 {
					reg = <0x6 0x6>;
				};

				macaddr_eth2: macaddr@c {
					reg = <0xc 0x6>;
				};
			};

			partition@3a0000 {
				label = "config";
				reg = <0x003a0000 0x00040000>;
			};

			partition@3e0000 {
				label = "data";
				reg = <0x003e0000 0x00100000>;
			};

			partition@4e0000 {
				label = "firmware";
				compatible = "denx,fit";
				reg = <0x004e0000 0x1b20000>;
			};
		};
	};
};

&dp3 {
	status = "okay";

	phy-handle = <&qca8072_1>;
	nvmem-cells = <&macaddr_eth1>;
	nvmem-cell-names = "mac-address";
	label = "lan2";
};

&dp4 {
	status = "okay";

	phy-handle = <&qca8072_0>;
	nvmem-cells = <&macaddr_eth0>;
	nvmem-cell-names = "mac-address";
	label = "lan1";
};

&dp5 {
	status = "okay";

	phy-mode = "sgmii";
	phy-handle = <&qca8081>;
	nvmem-cells = <&macaddr_eth2>;
	nvmem-cell-names = "mac-address";
	label = "wan";
};

&edma {
	status = "okay";
};

&mdio {
	status = "okay";
	pinctrl-0 = <&mdio_pins>;
	pinctrl-names = "default";
	reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
	reset-delay-us = <10000>;
	reset-post-delay-us = <50000>;

	ethernet-phy-package@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "qcom,qca8075-package";
		reg = <0>;

		qcom,package-mode = "psgmii";

		qca8072_0: ethernet-phy@3 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <3>;
		};

		qca8072_1: ethernet-phy@4 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <4>;
		};
	};

	qca8081: ethernet-phy@24 {
		compatible = "ethernet-phy-id004d.d101";
		reg = <24>;
		reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
		reset-assert-us = <10000>;
		reset-deassert-us = <50000>;
	};
};

&sdhc_1 {
	pinctrl-0 = <&sd_pins>;
	pinctrl-names = "default";
	status = "okay";

	vqmmc-supply = <&ipq6018_l2>;
	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
};

&switch {
	status = "okay";

	switch_lan_bmp = <(ESS_PORT3 | ESS_PORT4)>;
	switch_wan_bmp = <ESS_PORT5>;
	switch_mac_mode = <MAC_MODE_PSGMII>;
	switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>;
	port3_pcs_channel = <4>;

	qcom,port_phyinfo {
		port@3 {
			port_id = <3>;
			phy_address = <4>;
		};
		port@4 {
			port_id = <4>;
			phy_address = <3>;
		};
		port@5 {
			port_id = <5>;
			phy_address = <24>;
			port_mac_sel = "QGMAC_PORT";
		};
	};
};

&qpic_bam {
	status = "okay";
};

&qpic_nand {
	status = "okay";

	nand@0 {
		reg = <0>;

		nand-ecc-strength = <4>;
		nand-ecc-step-size = <512>;
		nand-bus-width = <8>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "nand_data";
				reg = <0x0000000 0x10000000>;
			};
		};
	};
};

&pcie_phy {
	status = "okay";
};

&pcie0 {
	status = "okay";
	perst-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
};

&wifi {
	status = "okay";
	qcom,ath11k-calibration-variant = "8devices-Mango";
};

&qusb_phy_1 {
	status = "okay";
};

&usb2 {
	status = "okay";
};

&qusb_phy_0 {
	status = "okay";
};

&ssphy_0 {
	status = "okay";
};

&usb3 {
	status = "okay";
};