// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright SolidRun Ltd.
 * Copyright (C) 2024 Tobias Schramm <tobias@t-sys.eu>
 *
 * Device tree for the CN9130-based ClearFog Pro
 */

#include "cn9130.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "SolidRun ClearFog Pro";
	compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad",
		     "marvell,armada-ap807";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	aliases {
		gpio1 = &cp0_gpio1;
		gpio2 = &cp0_gpio2;
		i2c0 = &cp0_i2c0;
		ethernet0 = &cp0_eth0;
		ethernet1 = &cp0_eth1;
		ethernet2 = &cp0_eth2;
		spi1 = &cp0_spi1;
	};

	memory@00000000 {
		reg = <0x0 0x0 0x1 0x0>;
		device_type = "memory";
	};

	/* Virtual regulator, root of power tree */
	vin: regulator-vin {
		compatible = "regulator-fixed";
		regulator-name = "vin";
		regulator-always-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	/* Regulators supplied by vin */
	v_5v0: regulator-v_5v0 {
		compatible = "regulator-fixed";
		regulator-name = "v_5v0";
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vin>;
	};

	v_3v3: regulator-v_3v3 {
		compatible = "regulator-fixed";
		regulator-name = "v_3v3";
		regulator-always-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vin>;
	};

	/* Regulators supplied by v_5v0 */
	v_1v8: regulator-v_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "v_1v8";
		regulator-always-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&v_5v0>;
	};

	v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus {
		compatible = "regulator-fixed";
		regulator-name = "v_5v0_usb3_hst_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
		vin-supply = <&v_5v0>;
	};

	/* Regulators internal to SOM */
	vqmmc: regulator-vqmmc {
		compatible = "regulator-fixed";
		regulator-name = "vqmmc";
		regulator-always-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&v_5v0>;
	};

	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
		compatible = "usb-nop-xceiv";
		vbus-supply = <&v_5v0_usb3_hst_vbus>;
	};

	cp0_sfp_eth0: sfp-eth@0 {
		compatible = "sff,sfp";
		i2c-bus = <&cp0_i2c1>;
		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
		maximum-power-milliwatt = <2000>;
	};

	keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&cp0_button_pin>;

		reset {
			label = "Reset";
			linux,code = <KEY_RESTART>;
			gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
		};
	};
};

&uart0 {
	status = "okay";
};

/* on-board eMMC  */
&ap_sdhci0 {
	bus-width = <8>;
	pinctrl-names = "default";
	vqmmc-supply = <&vqmmc>;
	status = "okay";
};

&cp0_crypto {
	status = "okay";
};

&cp0_ethernet {
	status = "okay";
};

&cp0_gpio1 {
	status = "okay";
};

&cp0_gpio2 {
	status = "okay";
};

&cp0_i2c0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_i2c0_pins>;
	clock-frequency = <100000>;

	/*
	 * PCA9655 GPIO expander, up to 1MHz clock.
	 *  0-CON3 CLKREQ#
	 *  1-CON3 PERST#
	 *  2-CON2 PERST#
	 *  3-CON3 W_DISABLE
	 *  4-CON2 CLKREQ#
	 *  5-USB3 overcurrent
	 *  6-USB3 power
	 *  7-CON2 W_DISABLE
	 *  8-JP4 P1
	 *  9-JP4 P4
	 * 10-JP4 P5
	 * 11-m.2 DEVSLP
	 * 12-SFP_LOS
	 * 13-SFP_TX_FAULT
	 * 14-SFP_TX_DISABLE
	 * 15-SFP_MOD_DEF0
	 */
	expander0: gpio-expander@20 {
		compatible = "nxp,pca9555";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		interrupt-parent = <&cp0_gpio1>;
		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&cp0_expander0_pins>;
		vcc-supply = <&v_3v3>;

		pcie1_0_clkreq {
			gpio-hog;
			gpios = <0 GPIO_ACTIVE_LOW>;
			input;
			line-name = "pcie1.0-clkreq";
		};

		pcie1_0_w_disable {
			gpio-hog;
			gpios = <3 GPIO_ACTIVE_LOW>;
			output-low;
			line-name = "pcie1.0-w-disable";
		};

		pcie2_0_clkreq {
			gpio-hog;
			gpios = <4 GPIO_ACTIVE_LOW>;
			input;
			line-name = "pcie2.0-clkreq";
		};

		pcie2_0_w_disable {
			gpio-hog;
			gpios = <7 GPIO_ACTIVE_LOW>;
			output-low;
			line-name = "pcie2.0-w-disable";
		};

		usb3_ilimit {
			gpio-hog;
			gpios = <5 GPIO_ACTIVE_LOW>;
			input;
			line-name = "usb3-current-limit";
		};

		m2_devslp {
			gpio-hog;
			gpios = <11 GPIO_ACTIVE_HIGH>;
			output-low;
			line-name = "m.2 devslp";
		};
	};

	/* ADC only for mikroBUS connector */
	mcp3021@4c {
		compatible = "microchip,mcp3021";
		reg = <0x4c>;
	};

	/* EEPROM on the SOM */
	eeprom@53 {
		compatible = "atmel,24c02";
		reg = <0x53>;
		pagesize = <16>;
		read-only;

		nvmem-layout {
			compatible = "onie,tlv-layout";

			onie_tlv_macaddr: mac-address {
				#nvmem-cell-cells = <1>;
			};
		};
	};
};

/* SMBUS on mini PCIe sockets */
&cp0_i2c1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_i2c1_pins>;
	clock-frequency = <100000>;
};

&cp0_mdio {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;
		/* Green led blinks on activity, orange LED on link */
		marvell,reg-init = <3 16 0 0x0064>;
	};

	switch@4 {
		compatible = "marvell,mv88e6085";
		reg = <4>;
		interrupt-controller;
		#interrupt-cells = <2>;
		interrupt-parent = <&cp0_gpio1>;
		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&cp0_dsa0_pins>;
		reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;

		mdio-external {
			compatible = "marvell,mv88e6xxx-mdio-external";
			#address-cells = <1>;
			#size-cells = <0>;

			/* 88E1512 PHY */
			port6_phy: ethernet-phy@1 {
				reg = <1>;
			};
		};

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				label = "lan5";
			};

			port@1 {
				reg = <1>;
				label = "lan4";
			};

			port@2 {
				reg = <2>;
				label = "lan3";
			};

			port@3 {
				reg = <3>;
				label = "lan2";
			};

			port@4 {
				reg = <4>;
				label = "lan1";
			};

			port@5 {
				reg = <5>;
				ethernet = <&cp0_eth1>;
				label = "cpu";
				phy-mode = "rgmii-id";

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@6 {
				/* 88E1512 external phy */
				reg = <6>;
				label = "lan6";
				phy-handle = <&port6_phy>;
				phy-mode = "rgmii-id";
			};
		};
	};
};

/* SRDS #0 - SATA on bottom M.2 B-Key connector */
&cp0_sata0 {
	status = "okay";

	sata-port@0 {
		status = "disabled";
	};

	sata-port@1 {
		phys = <&cp0_comphy0 1>;
		target-supply = <&v_3v3>;
	};
};

&cp0_utmi {
	status = "okay";
};

/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */
&cp0_usb3_0 {
	status = "okay";
	phys = <&cp0_utmi0>;
	phy-names = "utmi";
	dr_mode = "host";
};

/* SRDS #1 - USB-A 3.0 host port */
&cp0_usb3_1 {
	status = "okay";
	phys = <&cp0_utmi1>, <&cp0_comphy1 0>;
	phy-names = "utmi", "usb";
	usb-phy = <&cp0_usb3_0_phy1>;
	dr_mode = "host";
};

/* SRDS #2 - SFP+ 10GE */
&cp0_eth0 {
	status = "okay";
	phy-mode = "10gbase-r";
	phys = <&cp0_comphy2 0>;
	managed = "in-band-status";
	nvmem-cells = <&onie_tlv_macaddr 0>;
	nvmem-cell-names = "mac-address";
	sfp = <&cp0_sfp_eth0>;
};

/* SRDS #3 - SGMII 1GE to L2 switch */
&cp0_eth1 {
	status = "okay";
	phys = <&cp0_comphy3 1>;
	phy-mode = "sgmii";
	nvmem-cells = <&onie_tlv_macaddr 1>;
	nvmem-cell-names = "mac-address";

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

/* SRDS #4 - mini PCIe slot near SOM */
&cp0_pcie1 {
	status = "okay";
	phys = <&cp0_comphy4 1>;
	num-lanes = <1>;
	reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
};

/* SRDS #5 - mini PCIe slot far from SOM */
&cp0_pcie2 {
	status = "okay";
	phys = <&cp0_comphy5 2>;
	num-lanes = <1>;
	reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
};

/* GE PHY RGMII */
&cp0_eth2 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_ge2_rgmii_pins>;
	phy = <&phy0>;
	phy-mode = "rgmii-id";
	nvmem-cells = <&onie_tlv_macaddr 2>;
	nvmem-cell-names = "mac-address";
};

/* micro SD card slot */
&cp0_sdhci0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>;
	bus-width = <4>;
	cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
	no-1-8-v;
	vqmmc-supply = <&v_3v3>;
	vmmc-supply = <&v_3v3>;
};

&cp0_spi1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_spi1_pins>;

	spi-flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0x0>;
		#address-cells = <0x1>;
		#size-cells = <0x1>;
		spi-max-frequency = <10000000>;
	};
};

&cp0_syscon0 {
	cp0_pinctrl: pinctrl {
		compatible = "marvell,cp115-standalone-pinctrl";

		cp0_i2c0_pins: cp0-i2c0-pins {
			marvell,pins = "mpp37", "mpp38";
			marvell,function = "i2c0";
		};

		cp0_i2c1_pins: cp0-i2c1-pins {
			marvell,pins = "mpp35", "mpp36";
			marvell,function = "i2c1";
		};

		cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins {
			marvell,pins = "mpp44", "mpp45", "mpp46",
				       "mpp47", "mpp48", "mpp49",
				       "mpp50", "mpp51", "mpp52",
				       "mpp53", "mpp54", "mpp55";
			marvell,function = "ge1";
		};

		cp0_sdhci_cd_pins: cp0-sdhci-cd-pins {
			marvell,pins = "mpp43";
			marvell,function = "sdio";
		};

		cp0_sdhci_pins: cp0-sdhci-pins {
			marvell,pins = "mpp56", "mpp57", "mpp58",
				       "mpp59", "mpp60", "mpp61";
			marvell,function = "sdio";
		};

		cp0_spi1_pins: cp0-spi1-pins {
			marvell,pins = "mpp12", "mpp13", "mpp14",
				       "mpp15", "mpp16";
			marvell,function = "spi1";
		};

		cp0_dsa0_pins: cp0-dsa0-pins {
			marvell,pins = "mpp27", "mpp29";
			marvell,function = "gpio";
		};

		cp0_button_pin: cp0-button-pin {
			marvell,pins = "mpp32";
			marvell,function = "gpio";
		};

		cp0_expander0_pins: cp0-expander0-pins {
			marvell,pins = "mpp4";
			marvell,function = "gpio";
		};
	};
};