From 4ae474afbd023a3386f4276ca8f948a44b49ff1b Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Fri, 3 Nov 2023 23:02:35 +0800 Subject: mediatek: filogic: add Netcore N60 support Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: ESMT F50L1G41LB 128MB RAM: W632GU6NB DDR3 256MB Ethernet: 1x 2.5G + 4x 1G WiFi1: MT7975N 2.4GHz 4T4R WiFi2: MT7975PN 5GHz 4T4R Button: Reset, WPS Power: DC 12V 2A Flash instructions: 1. Connect to the router using ssh or telnet, username: useradmin, password is the web login password of the router. 2. Use scp to upload bl31-uboot.fip and flash: "mtd write xxx-preloader.bin spi0.0" "mtd write xxx-bl31-uboot.fip FIP" "mtd erase ubi" 3. Connect to the router via the Lan port, set a static ip of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 4. Download initramfs image, reboot router, waiting for tftp recovery to complete. 5. After openwrt boots up, perform sysupgrade. Note: 1. Back up all mtd partitions before flashing. Signed-off-by: Chukun Pan --- target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/mediatek/filogic/base-files/lib') diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 389c177fb9..380606412d 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -130,6 +130,7 @@ platform_do_upgrade() { h3c,magic-nx30-pro|\ jcg,q30-pro|\ mediatek,mt7981-rfb|\ + netcore,n60|\ qihoo,360t7|\ tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ -- cgit v1.2.3