From 47cc09aa7a9a12cb7b18ef96f0b5d0bcb5d84b9e Mon Sep 17 00:00:00 2001
From: Álvaro Fernández Rojas <noltari@gmail.com>
Date: Thu, 15 Jun 2023 18:16:21 +0200
Subject: bmips: add support for Comtrend VG-8050
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The Comtrend VG-8050 is a wifi gigabit ethernet router, 2.4 GHz single band with
two external antennas.

Hardware:
 - SoC: Broadcom BCM63169
 - CPU: dual core BMIPS4350 @ 400Mhz
 - RAM: 128 MB DDR
 - Flash: 128 MB NAND
 - LAN switch: Broadcom BCM53125, 5x 1Gbit
 - Wifi 2.4 GHz: SoC (BCM63268) 802.11bgn
 - USB: 1x 2.0 (optional)
 - Buttons: 2x (reset)
 - LEDs: yes
 - UART: yes

Installation via CFE web UI:
  1. Power off the router.
  2. Press reset button near the power switch.
  3. Keep it pressed while powering up during ~20+ seconds.
  4. Browse to http://192.168.1.1 and upload the firmware.
  5. Wait a few minutes for it to finish.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 target/linux/bmips/image/bcm63268.mk | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

(limited to 'target/linux/bmips/image')

diff --git a/target/linux/bmips/image/bcm63268.mk b/target/linux/bmips/image/bcm63268.mk
index 6e27b16624..941e83f71b 100644
--- a/target/linux/bmips/image/bcm63268.mk
+++ b/target/linux/bmips/image/bcm63268.mk
@@ -1,5 +1,24 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
+define Device/comtrend_vg-8050
+  $(Device/bcm63xx-nand)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := VG-8050
+  CHIP_ID := 63268
+  SOC := bcm63169
+  CFE_RAM_FILE := comtrend,vg-8050/cferam.000
+  CFE_RAM_JFFS2_NAME := cferam.000
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    kmod-leds-bcm6328
+  CFE_WFI_FLASH_TYPE := 3
+  CFE_WFI_VERSION := 0x5732
+endef
+TARGET_DEVICES += comtrend_vg-8050
+
 define Device/comtrend_vr-3032u
   $(Device/bcm63xx-nand)
   DEVICE_VENDOR := Comtrend
-- 
cgit v1.2.3