From 9ebb44aef4db8f423f7bf1fd2436906b2eafb570 Mon Sep 17 00:00:00 2001 From: Guan-Hong Lin Date: Tue, 18 Dec 2018 16:35:30 +0800 Subject: ath79: add support for EnGenius EWS511AP EnGenius EWS511AP is a wireless managed wall AP with PoE support, based on Qualcomm/Atheros QCA9531(Honeybee) + QCA9887. Short specification: - 128MB of RAM - 16 MB of SPI FLASH - 2T2R 2.4 GHz (QCA9531), 802.11b/g/n - 1T1R 5 GHz (QCA9887), 802.11ac/n/a - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x Power LED, 2x LAN LEDs, 1x WLAN 2.4G LED, 1x WLAN 5G LED - 1x RESET button - built-in watchdog chipset Flash instruction: From EnGenius firmware to OpenWrt firmware: Original firmware is based on QSDK. Use sysupgrade firmware directly in vendor GUI. Reset to factory default is necessary. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the OpenWrt firmware in the root directory on your computer. 2. Power up EWS511AP. Press 4 and then press any key to enter u-boot. 3. Download OpenWrt firmware (ath)> tftpboot 0x80060000 ${dir}"openwrt-ath79-generic-engenius_ews511ap-squashfs-sysupgrade.bin" 4. Flash the firmware (ath)> erase 0x9f060000 +f50000 (ath)> cp.b $fileaddr 0x9f060000 $filesize 5. Reboot (ath)> reset Signed-off-by: Guan-Hong Lin --- target/linux/ath79/base-files/etc/board.d/02_network | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'target/linux/ath79/base-files/etc/board.d/02_network') diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 626fb2cb30..33166079e7 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -86,6 +86,9 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:wan" "2:lan:3" "3:lan:2" ;; + engenius,ews511ap) + ucidef_set_interface_lan "eth0 eth1" "dhcp" + ;; etactica,eg200) ucidef_set_interface_lan "eth0" "dhcp" ;; @@ -252,6 +255,12 @@ ath79_setup_macs() elecom,wrc-300ghbk2-i) wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2) ;; + engenius,ews511ap) + lan_mac=$(mtd_get_mac_text "u-boot-env" 233) + eth1_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac" + ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac" + ;; iodata,etg3-r) lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) wan_mac=$(macaddr_add "$lan_mac" -1) -- cgit v1.2.3