aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
...
* qualcommax: AW1000: sync qca807x PHY dts changesChukun Pan2024-02-16
| | | | | | | | | The dts of Arcadyan AW1000 forgot to convert qca807x PHY to PHY package implementation. This commit fix it. Fixes: 0ab4b92 ("qualcommax: convert qca807x PHY to PHY package implementation") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* mediatek: filogic: bpi-r3-mini: fix generating ubinized imageDaniel Golle2024-02-16
| | | | | | | | Generate ubinized image as ARTIFACT and make use of now available generic 'ubinize-image' build step intended for that purpose. Fixes: b03d3644cf ("mediatek: filogic: add BananaPi BPi-R3 mini") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: bpi-r3-mini: fix NAND flash layoutDaniel Golle2024-02-16
| | | | | | | | Fix NAND flash layout which was out-of-sync with the definition in ARM TrustedFirmware-A which expects UBI to start at 0x200000. Fixes: b03d3644cf ("mediatek: filogic: add BananaPi BPi-R3 mini") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: mt76x8: fix build due to renamed U-Boot binaryDaniel Golle2024-02-16
| | | | | | | | | The U-Boot binary for the RAVPower RP-WD009 has been renamed. In order to be uniform with all other U-Boot binaries generated the SoC type has been prepended. Set that new name also in the image build recipe for that device in order to fix build. Fixes: 927334a8f7 ("uboot-mediatek: add basic build for ZBT-WG3526 (MT7621, 16M SPI-NOR)") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* imx: update default network config for ventanaTim Harvey2024-02-15
| | | | | | | | update the default network configuration for Gateworks Ventana boards such that the left-most front-panel NIC is WAN and any additional are in LAN bridge Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: add gpio-button-hotplug to ventana imagesTim Harvey2024-02-15
| | | | | | | Add the gpio-button-hotplug to Gateworks ventana images to support the on-board user pushbutton. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mediatek: filogic: add BananaPi BPi-R3 miniDaniel Golle2024-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification ---------------------- SoC: MediaTek MT7986A 4x A53 Flash: 128MB SPI-NAND, 8GB eMMC RAM: 2GB DDR4 Ethernet: 2x 2.5GbE (Airoha EN8811H) WiFi: MediaTek MT7976C 2x2 2.4G + 3x3 5G Interfaces: * M.2 Key-M: PCIe 2.0 x2 for NVMe SSD * M.2 Key-B: USB 3.0 with SIM slot * front USB 2.0 port LED: Power, Status, WLAN2G, WLAN5G, LTE, SSD Button: Reset, internal boot switch Fan: PWM-controlled 5V fan Power: 12V Type-C PD Installation instructions for eMMC ---------------------------------- 0. Set boot switch to boot from SPI-NAND (assuming stock rom or immortalwrt running there). 1. Write GPT partition table to eMMC Move openwrt-mediatek-filogic-bananapi_bpi-r3-mini-emmc-gpt.bin to the device /tmp using scp and write it to /dev/mmcblk0: dd if=/tmp/openwrt-*-r3-mini-emmc-gpt.bin of=/dev/mmcblk0 2. Reboot (to reload partition table) 3. Write bootloader and OpenWrt images Move files to the device /tmp using scp: - openwrt-*-bananapi_bpi-r3-mini-emmc-preloader.bin - openwrt-*-bananapi_bpi-r3-mini-emmc-bl31-uboot.fip - openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb - openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb Write them to the appropriate partitions: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-emmc-preloader.bin of=/dev/mmcblk0boot0 dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-emmc-bl31-uboot.fip of=/dev/mmcblk0p3 dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb of=/dev/mmcblk0p4 dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb of=/dev/mmcblk0p5 sync 4. Remove the device from power, set boot switch to eMMC and boot into OpenWrt. The device will come up with IP 192.168.1.1 and assume the Ethernet port closer to the USB-C power connector as LAN port. 5. If you like to have Ethernet support inside U-Boot (eg. to boot via TFTP) you also need to write the PHY firmware to /dev/mmcblk0boot1: echo 0 > /sys/block/mmcblk0boot1/force_ro dd if=/lib/firmware/airoha/EthMD32.dm.bin of=/dev/mmcblk0boot1 dd if=/lib/firmware/airoha/EthMD32.DSP.bin bs=16384 seek=1 of=/dev/mmcblk0boot1 Installation instructions for NAND ---------------------------------- 0. Set boot switch to boot from eMMC (assuming OpenWrt is installed there by instructions above. Using stock rom or immortalwrt does NOT work!) 1. Write things to NAND Move files to the device /tmp using scp: - openwrt-*-bananapi_bpi-r3-mini-snand-preloader.bin - openwrt-*-bananapi_bpi-r3-mini-snand-bl31-uboot.fip - openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb - openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb Write them to the appropriate locations: mtd write /tmp/openwrt-*-bananapi_bpi-r3-mini-snand-preloader.bin /dev/mtd0 ubidetach -m 1 ubiformat /dev/mtd1 ubiattach -m 1 volsize=$(wc -c < /tmp/openwrt-*-bananapi_bpi-r3-mini-snand-bl31-uboot.fip) ubimkvol /dev/ubi0 -N fip -n 0 -s $volsize -t static ubiupdatevol /dev/ubi0_0 /tmp/openwrt-*-bananapi_bpi-r3-mini-snand-bl31-uboot.fip cd /lib/firmware/airoha cat EthMD32.dm.bin EthMD32.DSP.bin > /tmp/en8811h-fw.bin ubimkvol /dev/ubi0 -N en8811h-firmware -n 1 -s 147456 -t static ubiupdatevol /dev/ubi0_1 /tmp/en8811h-fw.bin ubimkvol /dev/ubi0 -n 2 -N ubootenv -s 126976 ubimkvol /dev/ubi0 -n 3 -N ubootenv2 -s 126976 volsize=$(wc -c < /tmp/openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb) ubimkvol /dev/ubi0 -n 4 -N recovery -s $volsize ubiupdatevol /dev/ubi0_4 /tmp/openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb volsize=$(wc -c < /tmp/openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb) ubimkvol /dev/ubi0 -n 4 -N recovery -s $volsize ubiupdatevol /dev/ubi0_4 /tmp/openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb 3. Remove the device from power, set boot switch to NAND, power up and boot into OpenWrt. Partially based on immortalwrt support for the R3 mini, big thanks for doing the ground work! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add driver for Airoha EN8811H PHY as moduleDaniel Golle2024-02-15
| | | | | | | | Add PHY driver for Airoha EN8811H PHY and package it as kernel module. The PHY needs to load firmware from rootfs, so there is no point in having the driver built-into the kernel. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: update driver for MT7988 built-in 2.5G Ethernet PHYDaniel Golle2024-02-15
| | | | | | Sync driver for built-in 2.5G Ethernet PHY with MediaTek SDK. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firmware: package firmware for built-in 2.5G PHY on MT7988Daniel Golle2024-02-15
| | | | | | | | Firmware for the built-in 2.5G Ethernet PHY of the MediaTek MT7988 SoC is now part of linux-firmware, so we can package it. Only a single file is needed with recent driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: modernize Linksys E8450 / Belkin RT3200 UBI buildDaniel Golle2024-02-15
| | | | | | | | | | | | | | | | | Move fip and factory into UBI static volumes. Use fitblk instead of partition parser. !! RUN INSTALLER FIRST !! Existing users of previous OpenWrt releases or snapshot builds will have to **re-run the updated installer** before upgrading to firmware after this commit. DO NOT flash or run even just the initramfs image unless you have run the updated installer which moves the content of the 'factory' partition into a UBI volume. tl;dr: DON'T USE YET! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: convert unifi6lr-v{1,2,3}-ubootmod to fitblkDaniel Golle2024-02-15
| | | | | | No bootloader changes needed in this case, smooth transition. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: convert BPi-R64 to all-UBI layout and fitblkDaniel Golle2024-02-15
| | | | | | | Modernize bootloader and flash memory layout of the BPi-R64 similar to how it has also been done for the BPi-R3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: BananaPi BPi-R3 bootloader updateDaniel Golle2024-02-15
| | | | | | | | | | | | | | | * Switch to all-UBI layout on SPI-NAND * use fitblk driver instead of uImage.FIT partition parser * adapt sysupgrade * bump COMPAT_VERSION Remove BROKEN mark now that all needed changes are done. Boards running images generated before this commit will require full reflash of the bootloader, re-install from SD card is the easiest way to achieve that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: prepare BananaPi BPi-R3 for upcoming modernizationDaniel Golle2024-02-15
| | | | | | Mark board as broken until the complete boot stack has been updated. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: filogic: add support for BananaPi R4Daniel Golle2024-02-15
| | | | | | | | Add environment settings for the BananaPi BPI-R4 router board which can boot from (and store its bootloader environment on) micro SD card, SPI-NAND and eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for BananaPi BPI-R4 boardDaniel Golle2024-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: MediaTek MT7988A (4x Cortex-A73) RAM: 4 GiB DDR4 Flash: 128 MiB Winbond SPI-NAND MMC: 8 GiB eMMC *or* microSD (cannot be used both) ETH: 4x 1GE (1x WAN, 3x LAN) 2x SFP+ (10G, 5G, 2.5G, 1G) USB: on-board USB 3.2 4-port hub 1x USB 3.2 port (type A connector) 1x M.2 for 4G/5G modem 2x mPCIe for additional modems WiFi: optional MediaTek MT7996 Wi-Fi 7 module (using 2x PCIe gen3 x2 on the mPCIe slots and 12V power) Installation ------------ 1. Decompress and write the sdcard image to a micro SD card and use that to boot the R4 (both dip switches in upper position). 2. Use the bootloader menu accessible via the serial console to install to SPI-NAND. 3. Switch to boot from SPI-NAND and install to eMMC. Known issues ------------ - The RST button is hard-wired to the SoC reset and can't be read from software. This can be changed by modifying the board (ie. moving a 0-ohm resistor). However, in order to maintain compatibility with the board as it comes from factory the button isn't used by OpenWrt and the WPS button is used as factory/reset button instead. - various small things still need to be fixed in DT Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add patch for xsphy driver to support pcie2 on MT7988Daniel Golle2024-02-15
| | | | | | | Import patch from MediaTek SDK which allows using the third PCIe host controller of the MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: dts: mt7988: add uart1 and uart2Daniel Golle2024-02-15
| | | | | | Add device tree nodes for uart1 and uart2 of the MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: pinctrl-mt7988: add additional uart1_2_lite groupDaniel Golle2024-02-15
| | | | | | | | Add UART pinctrl group for using only pins 80 and 81 for uart1. This is needed on the BPi-R4 as RTS/CTS signals are used for other on-board functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: pinctrl-mt7988: add pinconf mapDaniel Golle2024-02-15
| | | | | | Add pull-up/pull-down configuration for pins of MT7988. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: switch to pending XFI 10G Ethernet driversDaniel Golle2024-02-15
| | | | | | | | | Replace previous patch adding paths and SerDes modes with patch series pending upstream adding dedicated drivers for XFI T-PHY and USXGMII PCS, extends LynxI PCS to be a standalone platform driver and as a consequence makes much less changes to the actual Ethernet driver mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport a hell of thermal commitsDaniel Golle2024-02-15
| | | | | | | Backport almost 50 commits from upstream Linux to improve thermal drivers for MediaTek SoCs and add new LVTS driver for MT7988. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: replace mt7988 clk files with accepted patchesDaniel Golle2024-02-15
| | | | | | Replace clock drivers for MT7988 with backported upstream commits. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport phylink changes from mainline LinuxDaniel Golle2024-02-15
| | | | | | | Let's pick a bunch of useful phylink changes which allow us to keep drivers in sync with mainline Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: switch to Linux version 6.1Daniel Golle2024-02-15
| | | | | | Drop support for Linux 5.15 and switch to Linux 6.1. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add pending fitblk uImage.FIT sub-image block driverDaniel Golle2024-02-15
| | | | | | | | | Add 'fitblk' driver to replace the rejected/deprecated uImage.FIT partition parser. To use the new driver, add phandle /chosen/rootdisk and point it to the MTD partition, UBI volume or block device holding the uImage.FIT. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: import pending patches adding support for NVMEM on UBI and MMCDaniel Golle2024-02-15
| | | | | | | Similar to supporting nvmem-layouts on MTD devices, also allow referencing UBI and MMC devices in DT. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: allow skipping deprecated uImage.FIT partition parserDaniel Golle2024-02-15
| | | | | | | | | | | | In order to allow gradually migrating the boards currently using the uImage.FIT partition (deprecated/rejected) parser to the new fitblk driver, skip the partition parser code in case the new fitblk driver (which serves the same purpose) is used. As an indicator for the use of the new fitblk driver, check if the /chosen/rootdisk property is present in the Device Tree. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: move uImage.FIT partition parser to mediatek targetDaniel Golle2024-02-15
| | | | | | | | | | The partition parser approach has been rejected upstream, it will be replaced by a small block driver which is the solution suggestion by upstream maintainers. As the partition parser has only been used by the mediatek target, as a first step, move it there. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: 6.1: backport UBI device model improvementsDaniel Golle2024-02-15
| | | | | | | | Backport two commits from Linux 6.3 wiring up device node parents of ubi devices (pointing to their MTD parent) as well as ubiblock devices (poiting to their parent UBI volume). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq807x: add support for CMCC RM2-6Chukun Pan2024-02-15
| | | | | | | | | | | | | | | | | | Hardware specifications: SoC: Qualcomm IPQ8070A RAM: 512MB of DDR3 Flash: 256MB Micron NAND Ethernet: 2x 1G RJ45 port WiFi1: QCN5024 2x2 2.4GHz WiFi2: QCN5054 2x2 5GHz Fan: 1x GPIO controlled Button: Reset, WPS Flash instructions: Upload factory.bin in stock firmware's upgrade page. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq807x: MX4200 convert qca807x PHY to new implementationPaweł Owoc2024-02-15
| | | | | | | Convert qca807x PHY to new implementation like for other devices. Signed-off-by: Paweł Owoc <frut3k7@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* qualcommax: remove usage of malibu_first_phy_addrRobert Marko2024-02-15
| | | | | | | | Now that Malibu (QCA807x) PHY is using the upstream driver, we dont need support to define address of the first PHY in package, so remove the malibu_first_phy_addr DTS property. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: use upstreamed QCA807x fixupRobert Marko2024-02-15
| | | | | | | Now that QCA807x interface mode check was upstreamed, use the upstreamed version and mark it as such. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: fix bidirectional hardware flow offloadFelix Fietkau2024-02-14
| | | | | | Fix a bug that was introduced upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* omap: drop kernel 5.15Andre Heider2024-02-13
| | | | | | One version is sufficient for this minor target. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: switch to kernel 6.1Andre Heider2024-02-13
| | | | | | Lightly tested on boneblack, no fallout observed so far. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: run kernel_oldconfig for 6.1Andre Heider2024-02-13
| | | | | | No manual changes done. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: copy kernel config for 6.1Andre Heider2024-02-13
| | | | | | Unmodified copy to ease reviewing follow-up changes. Signed-off-by: Andre Heider <a.heider@gmail.com>
* mediatek: filogic: fixup mt7988a DTS coding styleRafał Miłecki2024-02-13
| | | | | | Use coding style as described as preferred in upstream DTS Coding Style. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: filogic: reorder mt7988a DTS propertiesRafał Miłecki2024-02-13
| | | | | | | Use order described as preferred in DTS Coding Style. Mostly just move "compatible", "reg", "ranges" and "status" properties. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: move uci_set_poe() to uci-defaults.shSander Vanheule2024-02-12
| | | | | | | | | PoE devices in the realtek target have the possibility to add PSE info to the board description via 02_network. Make this available for all targets, by moving the uci_set_poe() function to the globally available uci-default.sh script. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: move port filtering out of uci_set_poe()Sander Vanheule2024-02-12
| | | | | | | | | | | | uci_set_poe() now performs two duties: filtering the list of device ports to exclude non-PoE ports, and generating the PoE related device config. Extract the port filtering to an external function, which is made a bit more readable by the use of 'sort -V [-r] | uniq -u' to filter duplicate entries out of a (reverse) version sorted list. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: add support for chassis fan on ZyXEL XGS1250-12Tobias Schramm2024-02-12
| | | | | | | | | | The ZyXEL XGS1250-12 has a chassis fan. The fan is positioned perfectly to provide additional cooling to the Aquantia NBase-T phys. Testing has shown that the phys can reach temperatures upwards of 72 degrees Celsius quite easily at about 20 degrees Celsius ambient. Support the chassis fan to give the phys a bit of extra cooling. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* Revert "build: align SOURCE path for build system and SDK"Daniel Golle2024-02-12
| | | | | | | | | This reverts commit 131e41614dcfae1f995e55330ada6573ca244ba3. Sadly it makes menuconfig fail with tmp/.config-package.in:171: glob failed: No files found "feeds/base/utils/busybox/Config.in" make: *** [/usr/src/openwrt/include/toplevel.mk:136: menuconfig] Error 1 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: align SOURCE path for build system and SDKPaul Spooren2024-02-12
| | | | | | | | | | | | | | | Building a package in the build system or the SDK results in different values for the `SOURCE` property, it's either `packages/<package name>` or `feeds/base/<package name>`. The reason is that the SDK handles `openwrt.git` as an external feed called while the build system contains the *base* packages directly. Since packages created with either method are (ideally) the same (bit for bit), align the content of SOURCE. To do so this commit creates a symlink from `feeds/base` to `$(TOPDIR)/package` and adopts the SOURCE when building from inside the build system. Signed-off-by: Paul Spooren <mail@aparcar.org>
* generic: 6.1: fixup QCA807x upstream PHYRobert Marko2024-02-12
| | | | | | | | | | | | | | | Currently, we are checking whether the PHY package mode matches the individual PHY interface modes at PHY package probe time, but at that time we only know the PHY package mode and not the individual PHY interface modes as of_get_phy_mode() that populates it will only get called once the netdev to which PHY-s are attached to is being probed and thus this check will always fail and return -EINVAL. So, lets move this check to .config_init_once as at that point individual PHY interface modes should be populated. Fixes: 16364e410039 ("generic: 6.1: backport QCA807x PHY patches") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ramips: mt76x8: drop AT803X phy driverShiji Yang2024-02-12
| | | | | | | | | This Qualcomm Gigabit phy driver was mistakenly added because MT76x8 does not support external phy, and it only supports max 100M full duplex speed. Fixes: cadf5171074f ("ralink: add support for mt7628") Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* qualcommax: apply special PHY LEDs configuration for Xiaomi AX9000Christian Marangi2024-02-11
| | | | | | | | | Xiaomi AX9000 apply a special PHY LEDs configuration where the unique green LED for each qca807x PHY port is turned on also on 1000Mbps link. Apply this special configuration to reflect original implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.