aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
...
* generic: 6.1: backport PHY package MMD patchChristian Marangi2024-02-01
| | | | | | | | | | Backport PHY package MMD patch merged upstream that add support for writing MMD regs for the PHY package and support for writing to PHY package at an offset. All affected patches automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ath79: convert ath10k calibration data to NVMEM (ASCII MAC)Shiji Yang2024-02-01
| | | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with mtd ASCII MAC address. The "calibration" NVMEM cell size is 0x844. All unportable MAC address settings have been moved to '10_fix_wifi_mac' scripts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k calibration data to NVMEM (binary MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with mtd binary MAC address. The "calibration" NVMEM cell size is 0x844. The MAC addresses are assigned via dts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k calibration data to NVMEM (built-in MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with built-in MAC address. The "calibration" NVMEM cell size is 0x844. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (ASCII MAC)Shiji Yang2024-02-01
| | | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with mtd ASCII MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. All unportable MAC address settings have been moved to '10_fix_wifi_mac' scripts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (binary MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with mtd binary MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. The MAC addresses are assigned via dts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (built-in MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with built-in MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: add back board-2.bin to COMFAST devicesShiji Yang2024-02-01
| | | | | | | | The ath10k driver will load both pre-calibration data and board-2.bin if board-2.bin exists. So it's not necessary to remove it. And this change won't increase jffs2 image size. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* generic: 6.1: backport at803x split patchesChristian Marangi2024-02-01
| | | | | | | | | | | | | | Backport at803x split patches merged upstream to tidy things up for the at803x PHY driver. New Kernel config are introduced hence any user needs to be updated. Downstream ipq40xx patch require rework to correctly move them to the qcom specific PHY directory. All affected patch automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bcm27xx: bcm2712: remove boot-2711 image filesÁlvaro Fernández Rojas2024-02-01
| | | | | | | | | | According to Raspberry Pi documentation, the RPi 5 First Stage Bootloader loads the linux kernel instead of loading the Second Stage Bootloader (start.elf): https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#differences-on-raspberry-pi-5 Fixes: 8b63d9a ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: fix platform_copy_configÁlvaro Fernández Rojas2024-02-01
| | | | | | | Only bcm2708 and bcm2709 use "kernel.img" file name. bcm2710 and bcm2711 use "kernel8.img" and bcm2712 uses "kernel_2712.img". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: improve image generation scriptÁlvaro Fernández Rojas2024-02-01
| | | | | | | | | | - Exit immediately on a non-zero status. - Remove empty lines. - Remove unused variables. - Add missing ptgen variables for readability. - Refactor SYNTAX if block. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: properly detect boot partitionÁlvaro Fernández Rojas2024-02-01
| | | | | | | Automatically detect boot partition instead of forcing /dev/mmcblk0p1. This way users can still get /boot mounted when booting from USB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: set_preinit_iface: add RPi 5Álvaro Fernández Rojas2024-02-01
| | | | | | | | Add missing Rasoberry Pi 5 board_name to set_preinit_iface in order to get ethernet working on failsafe mode. Fixes: 8b63d9a ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: fixes for Ethernet on MT7988 SoCDaniel Golle2024-02-01
| | | | | | | | * fix switch ports with modes other than 1000M/Full * set 32-bit dma_coherent_mask to get PPE to work with 4 GiB of RAM * sync driver for built-in 1GE PHY with MediaTek SDK sources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qualcommax: dts: add reset delay to qca8081 phyChukun Pan2024-01-30
| | | | | | | | The qca8081 phy needs to set the reset delay time, otherwise it will not be detected by the mdio bus. Fixes: 75ad5c2 ("qualcommax: switch to qca8081 upstream PHY driver") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* bcm27xx: bcm2712: enable USB symbols and drop packagesÁlvaro Fernández Rojas2024-01-29
| | | | | | | This allows booting from USB. Fixes: 8b63d9ac4ae9 ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* lantiq: replace patch with upstream versionAleksander Jan Bajkowski2024-01-29
| | | | | | Replace recently added patch with version accepted upstream. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* bcm27xx: refresh bcm2711 kernel configÁlvaro Fernández Rojas2024-01-28
| | | | | | Refresh outdated bcm2711 (RPi 4B) kernel config. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* qualcommax: switch to qca8081 upstream PHY driverChristian Marangi2024-01-27
| | | | | | | | Switch to qca8081 upstream PHY. Update every device that have LEDs attached to the qca8081 PHY to follow new way of defining the LEDs and add original OEM configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch adding more speed modes to LED netdev triggerChristian Marangi2024-01-27
| | | | | | | Backport upstream patch adding more speed modes to LED netdev trigger. Fixes: 2c39269b6e00 ("generic: 6.1: backport qca808x LED support patch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport qca808x LED support patchChristian Marangi2024-01-27
| | | | | | | Backport qca808x LED support patch merged upstream needed to drop handling of it from the SSDK for ipq807x target. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: backport upstream Aquantia PHY firmware loader patchesChristian Marangi2024-01-26
| | | | | | | | | | | | | | Backport merged upstream patch that adds support for firmware loader from NVMEM or attached filesystem for Aquantia PHYs. Refresh all kernel patches affected by this change. Also update the path for aquantia .ko that got moved to dedicated directory upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [rmilecki: port to 5.15] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: drop swconfig leftoversAleksander Jan Bajkowski2024-01-26
| | | | | | | | They are unnecessary since ipq806x switched to DSA in the commit 337e36e0ef988d850105cfa5f7588e36d90aef2b. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Robert Marko <robimarko@gmail.com>
* realtek: 5.15: refresh HSGMII patch due to recent PHY backportChristian Marangi2024-01-26
| | | | | | | Refresh HSGMII patch due to recent PHY backport that cause compilation warning for case not handled in phy_interface_num_ports. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* layerscape: 5.15: refresh 2.5G-SGMII patch due to recent PHY backportChristian Marangi2024-01-26
| | | | | | | Refresh 2.5G-SGMII patch due to recent PHY backport that cause compilation warning for case not handled in phy_interface_num_ports. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* qualcommax: 301w: provide AQR FW via NVMEM cellsRobert Marko2024-01-26
| | | | | | | | | In order to get rid of having to modify U-boot bootcmd and having U-boot load the Aquantia PHY-s firmware lets use some of the free space on SPI-NOR to add a second ethphyfw partition and be able to load AQR FW via NVMEM cells. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: 301w: correct AQR reset GPIO-sRobert Marko2024-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that the reset GPIO-s defined for the two AQR PHY-s are actually reversed. Manually testing confirmed that GPIO44 is actually reset GPIO of AQR at 0, while GPIO59 is reset of AQR at 8: root@OpenWrt:~# mdio 9* DEV PHY-ID LINK 0x00 0x00000000 down 0x08 0x00000000 down 0x10 0x004dd0b1 down 0x11 0x004dd0b1 down 0x12 0x004dd0b1 down 0x13 0x004dd0b1 up 0x14 0x004dd0b1 down 0x15 0x04820a05 down root@OpenWrt:~# gpioset gpiochip0 44=0 root@OpenWrt:~# mdio 9* DEV PHY-ID LINK 0x08 0x00000000 down 0x10 0x004dd0b1 down 0x11 0x004dd0b1 down 0x12 0x004dd0b1 down 0x13 0x004dd0b1 up 0x14 0x004dd0b1 down 0x15 0x04820a05 down root@OpenWrt:~# gpioset gpiochip0 44=1 root@OpenWrt:~# mdio 9* DEV PHY-ID LINK 0x00 0x00000000 down 0x08 0x00000000 down 0x10 0x004dd0b1 down 0x11 0x004dd0b1 down 0x12 0x004dd0b1 down 0x13 0x004dd0b1 up 0x14 0x004dd0b1 down 0x15 0x04820a05 down root@OpenWrt:~# gpioset gpiochip0 59=0 root@OpenWrt:~# mdio 9* DEV PHY-ID LINK 0x00 0x00000000 down 0x10 0x004dd0b1 down 0x11 0x004dd0b1 down 0x12 0x004dd0b1 down 0x13 0x004dd0b1 up 0x14 0x004dd0b1 down 0x15 0x04820a05 down root@OpenWrt:~# gpioset gpiochip0 59=1 root@OpenWrt:~# mdio 9* DEV PHY-ID LINK 0x00 0x00000000 down 0x08 0x00000000 down 0x10 0x004dd0b1 down 0x11 0x004dd0b1 down 0x12 0x004dd0b1 down 0x13 0x004dd0b1 up 0x14 0x004dd0b1 down 0x15 0x04820a05 down Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: 301w: populate AQR firmware nameRobert Marko2024-01-26
| | | | | | | | | | Now that we have support for firmware loading via the kernel driver, it makes sense to populate the firmware name as well, so if its present the driver can load it. In later patches, loading the FW via NVMEM will be added as well. Signed-off-by: Robert Marko <robimarko@gmail.com>
* bcm27xx: switch to bcm27xx-utilsÁlvaro Fernández Rojas2024-01-26
| | | | | | | bcm27xx-userland is now deprecated and utils should be used instead. https://github.com/raspberrypi/userland/commit/96a7334ae9d5fc9db7ac92e59852377df63f1848 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: 5.15: update Aquantia PHY driver to v6.1 codeRafał Miłecki2024-01-26
| | | | | | Backport few upstream changes included between v5.15 and v6.1. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: 5.15: backport v6.1 PHY changes required for AquantiaRafał Miłecki2024-01-26
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* qualcommax: refresh 6.1 patchesÁlvaro Fernández Rojas2024-01-26
| | | | | | | | Refresh patches for Linux 6.1 which no longer apply cleanly after adding ipq4019 MDIO MDC rate fix pending patches. Fixes: 53f338be43e0 ("generic: 6.1: add pending patch for ipq4019 MDIO MDC rate fix") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: add new bcm2712 subtargetMarty Jones2024-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Raspberry Pi 5. Instead of using 16K pages like Raspberry Pi OS, OpenWrt uses 4K pages due to incompatibilities with F2FS and other applications. There are multiple RPi forum posts with different cases and users are forcing kernel8.img to workaround them, which is the 64 bit kernel of the RPi 4. However, this isn't possible in OpenWrt because we only ship one kernel and we would have to add RPi 5 support to bcm2711 subtarget (RPi 4) for that workaround to work in OpenWrt. Specification: - Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographic extension, 512KB L2 caches per core, 2048KB L3 cache Features: - VideoCore VII GPU, supports OpenGL ES 3.1, Vulkan 1.2 - Dual 4Kp60 HDMI display output with HDR support 4Kp60 HEVC decoder - LPDDR4X-4267 SDRAM 4GB and 8GB - Dual-band 802.11ac Wi-Fi - Bluetooth 5.0 / Bluetooth Low Energy - microSD card slot, with support for SDR104 high-speed mode - 2 x USB 3.0 ports - 2 x USB 2.0 ports - Gigabit Ethernet - 2 x 4 lane MIPI camera/display - PCIe 2.0 x1 - 5V/5A power via USB-C - Raspberry Pi standard 40-pin header - Real-time clock RTC - Power button Build system: x86_64 Build-tested: bcm2712 Run-tested: bcm2712/RPi5 Signed-off-by: Marty Jones <mj8263788@gmail.com> [Remove device variant, improve description] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: update 6.1 patches to latest versionMarty Jones2024-01-25
| | | | | | | | | | | | | | | | Add support for BCM2712 (Raspberry Pi 5). https://github.com/raspberrypi/linux/commit/3bb5880ab3dd31f75c07c3c33bf29c5d469b28f3 Patches were generated from the diff between linux kernel branch linux-6.1.y and rpi-6.1.y from raspberry pi kernel source: - git format-patch linux-6.1.y...rpi-6.1.y Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> [Remove applied and reverted patches, squash patches and config commits] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath79: add Ubiquiti Rocket M XW as alternate name to Bullet M XWLech Perczak2024-01-25
| | | | | | | | | | | | | | | | | | | | | | | | Ubiquiti Rocket M XW is a single-band, 2x2:2 external Wi-Fi AP, with optional GPS receiver, with two external RP-SMA antenna connections, based on AR9342 SoC. Two band variants exists, for 2.4GHz and 5GHz band, usable with the same image. Specs: - CPU: Atheros AR9342 MIPS SoC at 535MHz - RAM: 64MB DDR400 - ROM: 8MB SPI-NOR in SO16W package, MX25L6408E - Wi-Fi Atheros AR9342 built-in 2x2:2 radio - Ethernet: Atheros AR8035 PHY, limited to 100Mbps speeds due to magnetics - Power: 24V passive PoE input. Installation: please refer to Ubiquiti Bullet M2HP for documentation. The device runs with exactly same image as the Bullet, and after fixes in preceding commit, is fully functional again. Add the alternative name to the build system. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: ubnt-bullet-m-xw: fix Ethernet PHY trafficLech Perczak2024-01-25
| | | | | | | | | | | | | | | | Since commit 6f2e1b7485f0 ("ath79: disable delays on AT803X config init") Ubiquiti XW boards equipped with AR8035 PHY suffered from lack of outbound traffic on the Ethernet port. This was caused by the fact, the U-boot has set this during boot and it wasn't reset by the PHY driver, and the corresponding setting in device tree was wrong. Set the 'phy-mode = "rgmii-txid"' at the &eth0, and drop this property from PHY node, as it is not parsed there. This causes the device to connect using Ethernet once again. Fixes: db4b6535f837 ("ath79: Add support for Ubiquity Bullet M (XW)") Fixes: 6f2e1b7485f0 ("ath79: disable delays on AT803X config init") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: ubnt-bullet-m-xw: set PHY max-speed to 100MbpsLech Perczak2024-01-25
| | | | | | | | Onboard AR8035 PHY supports 1000Base-T operation, but onboard Ethernet magnetics do not. Reduce advertised link speeds to 100Mbps and lower. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ipq807x: add support for loading Aquantia FW from NVMEM for NBG7815Christian Marangi2024-01-25
| | | | | | | Add support for loading Aquantia FW from NVMEM for Zyxel NBG7815 restoring correct functionality of the 10g port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add pending patch for ipq4019 MDIO MDC rate fixChristian Marangi2024-01-25
| | | | | | | | | | | | | | | | Add pending patch for ipq4019 MDIO MDC rate fix. The divisor was never actually set resulting in the MDC rate running at a very low speed. The same MDIO is used on ipq807x where Aquantia PHY are commonly used where MDIO is used to load the PHY firmware. Running at higher speed is required to make the firmware load faster as it does reduce load time from 60+ second to 5-6 seconds. Add as pending as upstream there seems to be some conflicts with quic and me and it might take lots of time before this is effectively merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bmips: bcm6368-enetsw: Bump max MTULinus Walleij2024-01-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The safe max frame size for this ethernet switch is 1532 bytes, excluding the DSA TAG and extra VLAN header, so the maximum outgoing frame is 1542 bytes. The available overhead is needed when using the DSA switch with a cascaded Marvell DSA switch, which is something that exist in real products, in this case the Inteno XG6846. Use defines at the top of the size for max MTU so it is clear how we think about this, add comments. We need to adjust the RX buffer size to fit the new max frame size, which is 1542 when the DSA tag (6 bytes) and VLAN header (4 extra bytes) is added. We also drop this default MTU: #define ENETSW_TAG_SIZE (6 + VLAN_HLEN) ndev->mtu = ETH_DATA_LEN + ENETSW_TAG_SIZE; in favor of just: ndev->mtu = ETH_DATA_LEN; I don't know why the default MTU is trying to second guess the overhead required by DSA and VLAN but the framework will also try to bump the MTU for e.g. DSA tags, and the VLAN overhead is not supposed to be included in the MTU, so this is clearly not right. Before this patch (on the lan1 DSA port in this case): dsa_slave_change_mtu: master->max_mtu = 9724, dev->max_mtu = 10218, DSA overhead = 8 dsa_slave_change_mtu: master = extsw, dev = lan1 dsa_slave_change_mtu: master->max_mtu = 1510, dev->max_mtu = 9724, DSA overhead = 6 dsa_slave_change_mtu: master = eth0, dev = extsw dsa_slave_change_mtu new_master_mtu 1514 > mtu_limit 1510 mdio_mux-0.1:00: nonfatal error -34 setting MTU to 1500 on port 0 My added debug prints before the nonfatal error: the first switch from the top is the Marvell switch, the second in the bcm6368-enetsw with its 1510 limit. After this patch the error is gone. OpenWrt adds a VLAN to each port so we get VLAN tags on all frames. On this setup we even have 4 more bytes left after the two DSA tags and VLAN so we can go all the way up to 1532 as MTU. Testing the new 1532 MTU: eth0 ext1 enp7s0 .--------. .-----------. cable .------. | enetsw | <-> | mv88e6152 | <-----> | host | `--------´ `-----------´ `------´ On the router we set the max MTU for test: ifconfig eth0 mtu 1520 ifconfig br-wan mtu 1520 ifconfig ext1 mtu 1506 An MTU of 1506 on ext1 is a logic consequence of the above setup: this is the max bytes actually transferred. The framing added will be: - 18 bytes standard ethernet header - 4 bytes VLAN header - 6 bytes DSA tag for enetsw - 8 bytes DSA tag for mv88e6152 Sum: 1506 + 18 + 4 + 6 + 8 = 1542 which is out max frame size. Test pinging from host: ping -s 1478 -M do 192.168.1.220 PING 192.168.1.220 (192.168.1.220) 1478(1506) bytes of data. 1486 bytes from 192.168.1.220: icmp_seq=1 ttl=64 time=0.696 ms 1486 bytes from 192.168.1.220: icmp_seq=2 ttl=64 time=0.615 ms Test pinging from router: PING 192.168.1.2 (192.168.1.2): 1478 data bytes 1486 bytes from 192.168.1.2: seq=0 ttl=64 time=0.931 ms 1486 bytes from 192.168.1.2: seq=1 ttl=64 time=0.810 ms The max IP packet without headers is 1478, the outgoing ICMP packet is 1506 bytes. Then the DSA, VLAN and ethernet overhead is added. Let us verify the contents of the resulting ethernet frame of 1542 bytes. Ping packet on router side as viewed with tcpdump: 00:54:51.900869 AF Unknown (1429722180), length 1538: 0x0000: 3d93 bcae c56b a83d 8874 0300 0004 8100 =....k.=.t...... 0x0010: 0000 dada 0000 c020 0fff 0800 4500 05e2 ............E... 0x0020: 0000 4000 4001 b0ec c0a8 0102 c0a8 01dc ..@.@........... 0x0030: 0800 7628 00c3 0001 f5da 1d65 0000 0000 ..v(.......e.... 0x0040: ce65 0a00 0000 0000 1011 1213 1415 1617 .e.............. 0x0050: 1819 1a1b 1c1d 1e1f 2021 2223 2425 2627 .........!"#$%&' 0x0060: 2829 2a2b 2c2d 2e2f 3031 3233 3435 3637 ()*+,-./0123456 (...) - 3d93 = First four bytes are the last two bytes of the destination ethernet address I don't know why the first four are missing, but it sure explains why the paket is 1538 bytes and not 1542 which is the actual max frame size. - bcae c56b a83b = source ethernet address - 8874 0300 0004 = Broadcom enetsw DSA tag - 8100 0000 = VLAN 802.1Q header - dada 0000 c020 0fff = EDSA tag for the Marvell (outer) switch, - 0800 is the ethertype (part of the EDSA tag technically) - Next follows the contents of the ping packet as it appears if we dump it on the DSA interface such as tcpdump -i lan1 etc, there we get the stripped out packet, 1506 bytes. - At the end 4 bytes of FCS. This clearly illustrates that the DSA tag is included in the MTU which we set up in Linux, but the VLAN tag and ethernet headers and checksum is not. Tested-by: Paul Donald <newtwen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: drop NMBM layout for Xiaomi WR30UChuanhong Guo2024-01-23
| | | | | | | | | This reverts commit dcdcfc15115a1038e90f21f5aa41726d9c7e2fe5. This is a firmware for third-party u-boot mod, which should not be carried here by us. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* realtek: d-link dgs-1210-10p improve sfp supportMichel Thill2024-01-23
| | | | | | | | | | | | | | The current dts file of dgs-1210-10p doesn't support link states for the sfp ports (they are always up). This patch tries to give better support for this and was run tested on dgs-1210-10p. It was heavily inspired from Paul Fertser, RaylynnKnight and the author of dgs-1210-10mp-f.dts https://forum.openwrt.org/t/dlink-dgs-1210-10p-with-glc-t-co-sfp/170928 Signed-off-by: Michel Thill <jmthill@gmail.com>
* ath79: fix mac address on eap2x5-1port devicesNikolay Martynov2024-01-23
| | | | | | | | | | | | | | | Commit e816591e226a ("ath79: qca: convert to nvmem-layout") mistakenly switched the source of the mac address from the 'info' to 'art' partition. This patch updates all devices that share same 'parent' device tree file and was tested to fix the problem for eap225-outdoor-v3 - device that I actually own. Fixes: e816591e226a ("ath79: qca: convert to nvmem-layout") Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> [amend commit message] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* lantiq: fix boot isues on danube boardsAleksander Jan Bajkowski2024-01-22
| | | | | | | | | | | | | Enabling SMP on Danube[1] is incompatible with a patch that adds support for interrupt handling on all cores on other platforms[2]. This patch fixes the mentioned issue. 1. 084c20f6c54180f2dc6b3efc1c5ba9b62afbaf26 ("lantiq: xway: kernel: enable SMP support ") 2. fbd33d61648ae8982fbada7ad3b6d8222b367ab5 ("lantiq: enable interrupts on second VPEs") Fixes: #13934 Fixes: #14283 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* qualcommax: add SMP affinity scriptRobert Marko2024-01-22
| | | | | | | | | By default Linux will default to most IRQ-s being mapped to core 0 which during high loads will completely swamp the core 0, so lets add the widely used script that has been floating around forums for a long time to try and optimize the IRQ mapping a bit. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ramips: mt76x8: enable small_flash featureTomasz Maciej Nowak2024-01-22
| | | | | | | | | | | | | | | | | | | Some of devices in this target have only 8 MiB space and are closing to borders of usable space. Particularly, TP-Link RE305 v1 already suffers from this issue[1], where with current partition layout, on release images, there's not enough space for overlay. So activate small_flash feature, which will remove some userspace hardening but will gain almost 1 MiB additional flash memory space. Here is small size comparison of similar device (RE365 v1) with default config + LuCI: kernel rootfs sysupgrade current: 2305728 3635044 5964584 small_flash: 1713571 3320132 5047080 1. https://github.com/openwrt/openwrt/issues/14215 Suggested-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ipq806x: replace tsens patch with upstream versionChristian Marangi2024-01-21
| | | | | | Replace tsens patch with upstream version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: renumber backport patches starting from 000Christian Marangi2024-01-21
| | | | | | | | | Renumber backport patches starting from 000 to tidy things up. Also fix patch name format for the mmc backport patch. Refresh patches affected by this renumber change. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: move stmmac backport fix patches to genericChristian Marangi2024-01-21
| | | | | | | | | | | | | Move stmmac backport fix patches from ipq806x to generic backport directory as they got merged upstream and they fix wide performance regression. This will eventually cause performance increase on any user of the stmmac driver. Generic patch automatically refreshed with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.