aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
...
* mpc85xx: refresh 6.1 patchesPawel Dembicki2024-03-08
| | | | | | | | | Most changes done by "make target/linux/refresh" Manually refreshed: 102-powerpc-add-cmdline-override.patch Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: copy patches 5.15 to 6.1Pawel Dembicki2024-03-08
| | | | | | Just copy of config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: copy config 5.15 to 6.1Pawel Dembicki2024-03-08
| | | | | | Simple copy of patches. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: Get rid of 'of_flat_dt_is_compatible'Pawel Dembicki2024-03-08
| | | | | | | | | | | This patch replaces 'of_flat_dt_is_compatible' with 'of_machine_is_compatible'. The TL-WDR4900 platform file won't compile in the 6.1 kernel. The platform files for the rest of the routers have been reworked or based on newer solutions. Let's make the TL-WDR4900 consistent with them. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* lantiq: Fix build after kernel 5.15.150Hauke Mehrtens2024-03-08
| | | | | | | | | | | | | | | | | | | This fixes the following compile problem: ```` CC arch/mips/kernel/vpe-mt.o arch/mips/kernel/vpe-mt.c: In function 'vpe_run': arch/mips/kernel/vpe-mt.c:32:23: error: unused variable 'physical_memsize' [-Werror=unused-variable] 32 | unsigned long physical_memsize = 0L; | ^~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[6]: *** [scripts/Makefile.build:289: arch/mips/kernel/vpe-mt.o] Error 1 ```` physical_memsize was removed from upstream kernel, see: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=5b4f6c5ff65c8551018ccea40c569afd759734c0 Fixes: 387fde0da0e8 ("kernel: bump 5.15 to 5.15.150") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dtsFurong Xu2024-03-08
| | | | | | | | Clean duplication of #include <dt-bindings/leds/common.h>. Thanks musashino205 Fixes: 1493e8f8cbe2 ("mediatek: convert LED color/function format for Xiaomi Redmi AX6000") Signed-off-by: Furong Xu <xfr@outlook.com>
* mediatek: filogic: switch to fitblk for Xiaomi Redmi AX6000Furong Xu2024-03-08
| | | | | | | | Use the new fitblk driver. Run-tested: filogic/mt7986a-xiaomi-redmi-router-ax6000-ubootmod Signed-off-by: Furong Xu <xfr@outlook.com>
* mediatek: convert LED color/function format for Xiaomi Redmi AX6000Furong Xu2024-03-08
| | | | | | | | | | | | Commit 2d63d42f5e2f ("mediatek: convert to new LED color/function format where possible") leaves Xiaomi Redmi AX6000 un-converted, the two LEDs become dead. Now, LEDs are alive again. Fixes: 2d63d42f5e2f ("mediatek: convert to new LED color/function format where possible") Signed-off-by: Furong Xu <xfr@outlook.com>
* kernel: 6.1: add missing config symbol for tracingTony Ambardar2024-03-07
| | | | | | | Add missing option CONFIG_FPROBE to generic config, found building x86_64 arch with tracing enabled. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: Remove unused schedulersHauke Mehrtens2024-03-07
| | | | | | These schedulers were removed in kernel 5.15.150 and 6.1.180. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.150Hauke Mehrtens2024-03-07
| | | | | | | | | | | | | | | | | | | | | | | Removed because it is upstream: bcm53xx/patches-5.15/030-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cb1003c07e746e4e82bdd3959c9ea37018ed41a3 Removed because it is upstream: bcm53xx/patches-5.15/037-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c65a23e98e38dc991f495d6bdb3cfa6163a88a0c Removed because it is upstream: bcm53xx/patches-5.15/037-v6.6-0005-ARM-dts-BCM53573-Drop-nonexistent-usb-cells.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=71475bcee001cae3844644c2787eef93b26489d1 Adapted hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch to match the changes from the upstream flow offload patch: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7c71b831220edeab7ce603d818dc1708d9ea4137 Manually Adapted the following patch: bcm53xx/patches-5.15/035-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.149Hauke Mehrtens2024-03-07
| | | | | | | | | | | Removed because it is upstream: generic/pending-5.15/540-ksmbd-only-v2-leases-handle-the-directory.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=81ea755b8fa57ce186f56f14b709cf491c2a5505 Manually Adapted the following patch: ath79/patches-5.15/900-unaligned_access_hacks.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath25: drop targetRobert Marko2024-03-07
| | | | | | | | | | | | | | ath25 has been on life support for the last couple of releases, eventually leading to marking it as source-only in 2023. It has been basically only touched to do a kernel bump so that we can make the new OpenWrt release which was a challenge due to small RAM amount. However, with the attempt of kernel 6.1 update it turns out that kernel cannot even finish booting due to RAM constraints, so its time to let this target go. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq60xx: add support for netgear wax214Dirk Buchwalder2024-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear WAX214 is a 802.11 ax dual-band AP with PoE. (similar to Engenius EWS357APV3) Specifications: • CPU: Qualcomm IPQ6010 Quad core Cortex-A53 • RAM: 512MB of DDR3 • Storage: 128MB NAND (Macronix MX30UF1G18AC) • Ethernet: 1x 1G RJ45 port (QCA8072) PoE • WIFI: 2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate 5GHz: Qualcomm QCN5052 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate • LEDs: 4 x GPIO-controlled LEDs - 1 Power LED (orange) - 1 LAN LED (blue) - 1 WIFI 5g LED (blue) - 1 WIFI 2g LED (blue) black_small_square Buttons: 1x soft reset black_small_square Power: 12V DC jack or PoE (802.3af ) An populated serial header is onboard, format is 1.25mm 4p (DF13A-4P-1.25H) RX/TX is working, bootwait is active, secure boot is not enabled. The root password of the stock firmware is unknown, but failsafe mode can be entered to reset the password. Installation Instructions: - obtain serial access - stop auto boot (press "4", Entr boot command line interface) - setenv active_fw 0 (to boot from the primary rootfs, or set to 1 to boot from the secondary rootfs partition) - saveenv - tftpboot the initramfs image - bootm - copy openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi to the device - write the image to the NAND: - cat /proc/mtd and look for rootfs partition (should be mtd11, or mtd12 if you choose active_fw 1) - ubiformat /dev/mtd11 -f -y openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi - reboot Note: the firmware is senao-based. But I was unable to build a valid senao-header into the image. Maybe they changed the header format and senaoFW isn't working any more. Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
* kernel: bump 6.1 to 6.1.80John Audia2024-03-05
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.80 Manually rebased: generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch[1] All other patches automatically rebased. 1. Acknowledgement to @heheb and @DragonBluep. Upstream commit for ref: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.80&id=9c5662e95a8dcc232c3ef4deb21033badcd260f6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* bcm27xx: use PARTUUID for root in cmdlineÁlvaro Fernández Rojas2024-03-04
| | | | | | This allows booting from USB/NVME while keeping SD compatibility. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: pass signature to partition generationÁlvaro Fernández Rojas2024-03-04
| | | | | | | Passes IMG_PART_SIGNATURE to ptgen instead of using the default "OWRT" signature. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: fix platform_copy_configÁlvaro Fernández Rojas2024-03-04
| | | | | | | /boot/kernel*.img wildcard only works without quotation marks. Fixes: 1a5e51ab0011 ("bcm27xx: base-files: fix platform_copy_config") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: drop targetÁlvaro Fernández Rojas2024-03-04
| | | | | | | | | | | | BCM63xx maintainance is a PITA since there's no full Device Tree support and therefore every board needs it's own definition in board_bcm963xx.c There's no DSA support for this board and there have been very few contributions in the last years. Moreover, BCM63xx SoCs >= BCM6358 are already supported in bmips target, so any efforts to keep this target alive aren't worth the time. Let's focus the community efforts on improving bmips instead. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package ↵Matthias Schiffer2024-03-03
| | | | | | | | | | | | | | | | | | subdir compile dependencies In a pristine build, these directories are created as dependencies of the tools subdir compile, however this step never runs when the tools compile stamp already exists. Since commit ed6ba2801c0a ("tools: keep stamp file in $(STAGING_DIR_HOST)"), this will happen after `make clean`: $(STAGING_DIR) has been deleted, but the tools stamp still exists, so the next build will fail because $(STAGING_DIR) has not been set up correctly. Fix builds after `make clean` by adding the preparation as dependencies for the target and package directories as well. Fixes: ed6ba2801c0a ("tools: keep stamp file in $(STAGING_DIR_HOST)") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mvebu: add support for SolidRun ClearFog ProTobias Schramm2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SolidRun ClearFog Pro is a router based on the SolidRun CN9130 SOM. Specs: - SoC: Quad-Core Cortex-A72 CN9130 SoC - RAM: 4GiB DDR4 - Serial: Micro-USB port on front (FT232R, 115200 8n1) - Storage: 8GiB eMMC, microSD card slot, 8MiB SPI NOR flash - Ethernet: 7x GbE (1 port dedicated on SoC, 6 port switch with single GbE CPU port) - SFP: 1x SFP+ - USB: 1x USB-A 3.1 Gen 1 - PCIe: 2x mini PCIe (one slot with USB and SIM card socket) - SATA: 1x M.2 Key-B In addition to the usual connectivity options this device also features an internal mikroBUS expansion connector. SATA is currently untested due to lack of a suitable M.2 SSD. Installation ============ 1. Write sdcard sysupgrade image to microSD card using dd or similar 2. Insert microSD card into router and apply power 3. Device boots into OpenWRT 4. (optional) dd sysupgrade image to /dev/mmcblk0 to install to eMMC Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* kernel: 6.1: backport Marvell Armada 8k AP807 cpufreq supportTobias Schramm2024-03-02
| | | | | | | | Upstream a patch adding support for cpufreq on AP807-based SoC like the CN913x was submitted. Include it in patches to ensure best performance under load and lowest power consumption in idle. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* mediatek: filogic: fix failsafe mode on devices with no lan1Paul Geraedts2024-03-02
| | | | | | | | | | | Default to lan4 port, instead of (missing) lan1 port, to fix failsafe mode on Xiaomi AX3000T, WR30U, AX6000 Build system: x86/64 Build-tested: mediatek/filogic/xiaomi_mi-router-ax3000t-ubootmod Run-tested: mediatek/filogic/xiaomi_mi-router-ax3000t-ubootmod Signed-off-by: Paul Geraedts <p.f.j.geraedts@gmail.com>
* ath79: add support for ELECOM WAB-I1750-PSINAGAKI Hiroshi2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WAB-I1750-PS is a 2.4/5 GHz band 11ac (Wi-Fi 5) access point, based on QCA9558. Specification: - SoC : Qualcomm Atheros QCA9558 - RAM : DDR2 128 MiB (2x Winbond W9751G6KB251) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FMI-10G) - WLAN : 2.4/5 GHz 3T3R - 2.4 GHz : Qualcomm Atheros QCA9558 (SoC) - 5 GHz : Qualcomm Atheros QCA9880 - Ethernet : 2x 10/100/1000 Mbps - phy ("PD") : Atheros AR8035 - phy ("PSE") : Atheros AR8033 - LEDs/keys (GPIO) : 3x/3x - UART : 2x RJ-45 port - "SERVICE" : TTL (3.3V) - port : ttyS0 - assignment : 1:3.3V, 2:GND, 3:TX, 4:RX - settings : 115200n8 - note : no compatibility with "Cisco console cable" - "SERIAL" : RS232C (+-12V) - port : ? - assignment : 1:NC , 2:NC , 3:TXD, 4:GND, 5:GND, 6:RXD, 7:NC , 8:NC - settings : 115200n8 - note : compatible with "Cisco console cable" - Buzzer : 1x GPIO-controlled - USB : 1x USB 2.0 Type-A - Power : DC jack or PoE - DC jack : 12 VDC, 1.04 A (device only, rating) - PoE : 802.3af/at, 48 VDC, 0.26 A (device only, rating) - note : supports 802.3af supply on PSE (downstream) port when powered by DC adapter or 802.3at PoE Flash instruction using factory.bin image: 1. Boot WAB-I1750-PS without no upstream connection (or PoE connection without DHCP) 2. Access to the WebUI ("http://192.168.3.1") on the device and open firmware update page ("ツールボックス" -> "ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("アップデート") button 4. Wait ~120 seconds to complete flashing Revert to OEM firmware: 1. Download the latest OEM firmware 2. Remove 128 bytes(0x80) header from firmware image 3. Decode by xor with a pattern "8844a2d168b45a2d" (hex val) 4. Upload the decoded firmware to the device 5. Flash to "firmware" partition by mtd command 6. Reboot Notes: - To use the "SERVICE" port, the connection of 3.3V line is also required to enable console output. The uart line of "SERVICE" is branched out from the internal pin header with 74HC126D and 3.3V line is connected to OE pin on it. - "SERIAL" port is provided by HS UART on QCA9558 SoC that has compatibility with qca,ar9330-uart, but QCA955x SoC's is not supported on Linux Kernel and OpenWrt. - To supply 802.3af PoE on "PSE" port when powered by DC adapter, 12 VDC 3.5 A adapter is recommended. (official: WAB-EX-ADP1) MAC addresses: Ethernet (PD, PSE): 00:90:FE:xx:xx:0A (Config, ethaddr (text)) 2.4GHz : 00:90:FE:xx:xx:0A (Config, ethaddr (text)) 5GHz : 00:90:FE:xx:xx:0B [original work] Signed-off-by: Yanase Yuki <dev@zpc.st> [update for NVMEM and others] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: add support for ELECOM WAB-S1167-PSINAGAKI Hiroshi2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WAB-S1167-PS is a 2.4/5 GHz band 11ac (Wi-Fi 5) access point, based on QCA9557. Specification: - SoC : Qualcomm Atheros QCA9557 - RAM : DDR2 128 MiB (2x Winbond W9751G6KB251) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FMI-10G) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : Qualcomm Atheros QCA9557 (SoC) - 5 GHz : Qualcomm Atheros QCA9882 - Ethernet : 2x 10/100/1000 Mbps - phy ("PD") : Atheros AR8035 - phy ("PSE") : Atheros AR8033 - LEDs/keys (GPIO) : 3x/3x - UART : 1x RJ-45 port - "SERVICE" : TTL (3.3V) - port : ttyS0 - assignment : 1:3.3V, 2:GND, 3:TX, 4:RX - settings : 115200n8 - note : no compatibility with "Cisco console cable" - Buzzer : 1x GPIO-controlled - USB : 1x USB 2.0 Type-A - Power : DC jack or PoE - DC jack : 12 VDC, 1 A (device only, rating) - PoE : 802.3af/at, 48 VDC, 0.25 A (device only, rating) - note : supports 802.3af supply on PSE (downstream) port when powered by DC adapter or 802.3at PoE Flash instruction using factory.bin image: 1. Boot WAB-S1167-PS without no upstream connection (or PoE connection without DHCP) 2. Access to the WebUI ("http://192.168.3.1") on the device and open firmware update page ("ツールボックス" -> "ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("アップデート") button 4. Wait ~120 seconds to complete flashing Revert to OEM firmware: 1. Download the latest OEM firmware 2. Remove 128 bytes(0x80) header from firmware image 3. Decode by xor with a pattern "8844a2d168b45a2d" (hex val) 4. Upload the decoded firmware to the device 5. Flash to "firmware" partition by mtd command 6. Reboot Notes: - To use the "SERVICE" port, the connection of 3.3V line is also required to enable console output. The uart line of "SERVICE" is branched out from the internal pin header with 74HC126D and 3.3V line is connected to OE pin on it. - The same PCB is used with WAB-S600-PS. - To supply 802.3af PoE on "PSE" port when powered by DC adapter, 12 VDC 3.5 A adapter is recommended. (official: WAB-EX-ADP1) MAC addresses: Ethernet (PD, PSE): 00:90:FE:xx:xx:04 (Config, ethaddr (text)) 2.4GHz : 00:90:FE:xx:xx:04 (Config, ethaddr (text)) 5GHz : 00:90:FE:xx:xx:05 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: add support for ELECOM WAB-S600-PSINAGAKI Hiroshi2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WAB-S600-PS is a 2.4/5 GHz band 11n (Wi-Fi 4) access point, based on QCA9557. This device also supports 11ac (Wi-Fi 5) with the another official firmware. Specification: - SoC : Qualcomm Atheros QCA9557 - RAM : DDR2 128 MiB (2x Winbond W9751G6KB251) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FMI-10G) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : Qualcomm Atheros QCA9557 (SoC) - 5 GHz : Qualcomm Atheros QCA9882 - Ethernet : 2x 10/100/1000 Mbps - phy ("PD") : Atheros AR8035 - phy ("PSE") : Atheros AR8033 - LEDs/keys (GPIO) : 3x/3x - UART : 1x RJ-45 port - "SERVICE" : TTL (3.3V) - port : ttyS0 - assignment : 1:3.3V, 2:GND, 3:TX, 4:RX - settings : 115200n8 - note : no compatibility with "Cisco console cable" - Buzzer : 1x GPIO-controlled - USB : 1x USB 2.0 Type-A - Power : DC jack or PoE - DC jack : 12 VDC, 1 A (device only, rating) - PoE : 802.3af/at, 48 VDC, 0.25 A (device only, rating) - note : supports 802.3af supply on PSE (downstream) port when powered by DC adapter or 802.3at PoE Flash instruction using factory.bin image: 1. Boot WAB-S600-PS without no upstream connection (or PoE connection without DHCP) 2. Access to the WebUI ("http://192.168.3.1") on the device and open firmware update page ("ツールボックス" -> "ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("アップデート") button 4. Wait ~120 seconds to complete flashing Revert to OEM firmware: 1. Download the latest OEM firmware 2. Remove 128 bytes(0x80) header from firmware image 3. Decode by xor with a pattern "8844a2d168b45a2d" (hex val) 4. Upload the decoded firmware to the device 5. Flash to "firmware" partition by mtd command 6. Reboot Notes: - To use the "SERVICE" port, the connection of 3.3V line is also required to enable console output. The uart line of "SERVICE" is branched out from the internal pin header with 74HC126D and 3.3V line is connected to OE pin on it. - The same PCB is used with WAB-S1167-PS. - To supply 802.3af PoE on "PSE" port when powered by DC adapter, 12 VDC 3.5 A adapter is recommended. (official: WAB-EX-ADP1) MAC addresses: Ethernet (PD, PSE): BC:5C:4C:xx:xx:7C (Config, ethaddr (text)) 2.4GHz : BC:5C:4C:xx:xx:7C (Config, ethaddr (text)) 5GHz : BC:5C:4C:xx:xx:7D [original work of common dtsi part for WAB-I1750-PS] Signed-off-by: Yanase Yuki <dev@zpc.st> [adding support for WAB-S600-PS] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: Unielec u7621-01: remove invalid led statusDavid Bentham2024-03-02
| | | | | | | | | | The original commit had an invalid setting of the led status for this device. There is no gpio pin connected to that led so lets remove these from the u7621-01 dtsi file. Signed-off-by: David Bentham <db260179@gmail.com>
* octeontx: update default network configTim Harvey2024-03-02
| | | | | | | | | | | Update the default network configuration for Gateworks Newport boards such that the left-most front-panel NIC is WAN and any additional are in LAN bridge: - gw610x/gw6903; single NIC: eth0 - gw620x/gw630x; two NIC's from left to right are: eth1 eth0 - gw640x; multiple NIC's from left to right: eth4 eth0 eth1 eth2 eth3 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* apm821xx: MBL DUO-only: enable USB-Storage for boot from USB supportChristian Lamparter2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | it is possible to boot and run OpenWrt from an image on an USB-Stick on the MyBook Live DUO. (No, the MyBook Live Single does NOT have an USB-Port and attempts at enabling it sadly all failed... so far). To do that: First, prepare a USB-Stick by writing the raw and uncompressed OpenWRT factory image for the device onto the stick (i.e. # gunzip -c openwrt-*wd_mybooklive*-factory.img.gz > /dev/sd$XX). Then enter the u-boot via an attached TTL/CMOS 3.3V cable adapter and give the following commands a try in the: usb start; sata init ext2load usb 0:1 ${fdt_addr_r} /boot/apollo3g.dtb ext2load usb 0:1 ${kernel_addr_r} /boot/uImage setenv bootargs 'root=/dev/sdc2 rw rootfstype=squashfs,ext4 rootdelay=5' run addtty; bootm ${kernel_addr_r} - ${fdt_addr_r} Notes: - booting from USB-Sticks takes a long time! Be prepared to wait a few minutes. (~3 minutes for 4 MiB /boot/uImage file on a USB 2.0 Stick) - the bootargs part 'root=/dev/sdX2' depends on how many HDDs/SSDs are slotted in. (if none: then use sda, if one: sdb. if two: sdc) - rootdelay is important as the storage on the USB-Sticks do not show up fast enough. 5 seconds might be excessive though. - it's possible to concat these commands together in one line and write it into u-boot's "bootcmd" environment variable and save the environment to make the device to always boot from USB from then on. if you have accidentally overridden the 'bootcmd' and want to return to 'spec' enter the following commands : setenv bootcmd 'run boot_sata_script_ap2nc' saveenv Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add u-boot,env compatibleChristian Lamparter2024-03-02
| | | | | | | | | | Note about the MyBook Live. The MyBook Live didn't have the encompassing fixed-partitions. This is needed for the u-boot,env compatible to be read as otherwise the kernel assumes this is a legacy NOR/NAND node and this binding is unsupported. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: remove 5.15 remnantsChristian Lamparter2024-03-02
| | | | | | deletes config-5.15 and patches-5.15/. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: make 6.1 kernel defaultChristian Lamparter2024-03-02
| | | | | | 6.1 has been available for some time for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* qualcommax: enable DEBUG_BUGVERBOSERobert Marko2024-03-01
| | | | | | | | | | Enable DEBUG_BUGVERBOSE by default on qualcommax as without it once BUG() is called we will not get any output other than "------------[ cut here ]------------" which is not usefull at all, so since we dont have kernel size constraints lets enable it by default. Signed-off-by: Robert Marko <robimarko@gmail.com>
* layerscape: remove 5.15 kernel supportPawel Dembicki2024-03-01
| | | | | | Kernel was switched to 6.1. Lets drop 5.15 support. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: switch kernel to 6.1 versionPawel Dembicki2024-03-01
| | | | | | | It was testing since couple months. Lets switch it to 6.1 by default for wide testing. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mediatek: mt7622: rtl8367c: add casts to fix compiler warningsDaniel Golle2024-03-01
| | | | | | | | | Use type casts to prevent compiler warnings which are going to turn into errors when we switch to Linux 6.6. In the long run we should try to get rid of this downstream driver now that RTL8367S is support by the rtl8365mb DSA driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: rename or replace accepted patchesDaniel Golle2024-03-01
| | | | | | | | | | Rename kernel patches accepted upstream to indicate at which version they have been accepted, replacing downstream variants which what was accepted upstream. Note that some of them are fixes which will find their way to older kernel versions as well via linux-stable. No functional changes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix version tag in thermal patchesDaniel Golle2024-03-01
| | | | | | | | Some backported thermal patches ended up with the wrong kernel version in their filename. Fix this. Fixes: c36de2e73a ("mediatek: backport a hell of thermal commits") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kirkwood: Add Marvell RTC to all machines with nothing elseLinus Walleij2024-02-29
| | | | | | | | | | | | | | | The Kirkwood SoCs all have an onchip RTC that can hold the time over e.g. a reboot which will help if no NTP servers are available. Create a kernel module package for the Marvell RTC, and add it to all Kirkwood devices that do not have their own discrete battery-backed RTC. Adding it to platforms with a proper RTC is just surplus. All Kirkwoods have at least one RTC so add RTC to the features list for Kirkwood as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ath79: nand: add SUPPORTED_DEVICES for Meraki MR18Samuele Longhi2024-02-29
| | | | | | | This adds the board name from ar71xx to support upgrade without -F for the Meraki MR18. Signed-off-by: Samuele Longhi <agave@dracaena.it>
* ramips: fix nvmem-cells for routers based on TP-Link ArcherMieczyslaw Nalewaj2024-02-29
| | | | | | Added missing nvmem-cells located in the loaded file mt7620a_tplink_archer.dtsi Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* mediatek: filogic: add support for Cudy RE3000 v1Robert Senderek2024-02-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MT7981B /256MB /16MB SPI (XM25QH128C) AX 2.4Ghz AX 5Ghz 160Mhz wide 1Gbit LAN OEM: root@RE3000:~# ifconfig |grep HWaddr br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 (label) br-wan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra2 Link encap:Ethernet HWaddr 82:XX:XX:28:XX:X0 rax0 Link encap:Ethernet HWaddr 82:XX:XX:38:XX:X0 rax2 Link encap:Ethernet HWaddr 82:XX:XX:58:XX:X0 OpenWrt root@OpenWrt:/# ifconfig |grep HW br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy0-ap0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy1-ap0 Link encap:Ethernet HWaddr 82:XX:XX:08:XX:X1 tftp Installation via u-boot: Connect TTL3.3V converter connector is under the radiator Set speed 115200 8 N 1 Interrupt boot process by holding down-arrow key during boot then >> 6. Load image >> 0 - TFTP client (Default) enter IP adresses and initramfs-kernel.bin write to flash via sysupgrade or gui Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
* d1: add new targetZoltan HERPAI2024-02-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This target adds support for the Allwinner D1 RISC-V based SoCs. - RISC-V single-core T-Head C906 (RV64GCV) - Tensilica HiFi4 DSP - DDR2/DDR3 support - 10/100/1000M ethernet - usual peripherals like USB2, SPI, I2C, PWM, etc. Four boards are supported: - Dongshan Nezha STU - 512Mb RAM - ethernet - LicheePi RV Dock - 512Mb RAM - wireless-only (RTL8723DS) - MangoPi MQ-Pro - 512Mb RAM - there are pads available for an SPI flash - wireless-only (RTL8723DS) - Nezha D1 - 512Mb/1Gb/2Gb RAM - 256Mb NAND flash - ethernet, wireless Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mediatek: re-enable mt7622-rfb1-ubi with changed partition layoutFelix Fietkau2024-02-28
| | | | | | | | | The boot loader does not have a fixed size limit for the kernel, so we're free to change the layout. This may break sysupgrade, but a fresh flash from initramfs works. Fixes: 6e2962d4c548 ("mediatek: mt7622: skip build for MT7622 rfb1 (UBI)") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: add support for Arcadyan VRV9510KWAC23Daniel Huici2024-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Arcadyan VRV9510KWAC23 (trade name Livebox Next) is a Lantiq router distributed by some spanish ISPs Hardware: - SoC: Lantiq VRX200 - CPU: 2x MIPS 34Kc 500 MHz - RAM: 256 MiB DDR2 - Flash: 128 MiB NAND - Ethernet: Built-in Gigabit Ethernet switch, 5x 1GbE - Wifi 2.4GHz: Broadcom BCM43222KFBG 802.11b/g/b MIMO 2T2R - Wifi 5GHz: Broadcom BCM4360KMLG 802.11ac MIMO 3T3R - USB: 2x USB 2.0 - DSL: Built-in VDSL/ADSL2+ XWAY VRX208 - LEDs: 8x - Buttons: 4x - Phone: Lantiq PEF 42068 V XWAY SLIC120 Install instructions: Detailed instructions can be found on the wiki https://openwrt.org/toh/arcadyan/vrv9510kwac23 1. Boot into UART mode and upload the the https://raw.githubusercontent.com/danielhuici/arcadyan-vrv9510kwac23-utils/main/u-boot.asc file via serial console to boot into U-Boot. 2. Perform a backup of the NAND 3. Setup a TFTP server and serve the https://github.com/danielhuici/arcadyan-vrv9510kwac23-utils/raw/main/u-boot.ltq.lzo.nandspl. Replace the OEM bootloader with this one. Erase your NAND and write the image into it 4. Reboot the router 5. Serve the OpenWrt ramdisk image on your TFTP server and boot it via U-Boot 6. When OpenWrt boots, flash the SquashFS OpenWrt image using LuCi interface, so OpenWrt gets installed into the NAND Signed-off-by: Daniel Huici <danielhuici@hotmail.com>
* ramips: removing unnecessary compatibility for TP-Link Archer C2 v1Mieczyslaw Nalewaj2024-02-27
| | | | | | | Removing: compatible = "rtl8367b" This string is not used anywhere in the code. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* generic l2tp: drop flow hash on forwardDavid Bauer2024-02-26
| | | | | | | | | | | | | Drop the flow-hash of the skb when forwarding to the L2TP netdev. This avoids the L2TP qdisc from using the flow-hash from the outer packet, which is identical for every flow within the tunnel. This does not affect every platform but is specific for the ethernet driver. It depends on the platform including L4 information in the flow-hash. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic vxlan: don't learn non-unicast L2 destinationsDavid Bauer2024-02-26
| | | | | | | | | | | This patch avoids learning non-unicast targets in the vxlan FDB. They are non-unicast and thus should be sent to the broadcast-IPv6 instead of a unicast address Link: https://lore.kernel.org/netdev/15ee0cc7-9252-466b-8ce7-5225d605dde8@david-bauer.net/ Link: https://github.com/freifunk-gluon/gluon/issues/3191 Signed-off-by: David Bauer <mail@david-bauer.net>
* mvebu: add kernel module for Turris Omnia Wi-Fi 6Jan Jasper de Kroon2024-02-26
| | | | | | | | | | | | The following kernel module package was added to the build recipe for the Turris Omnia: kmod-mt7915-firmware This module enables support for the official Wi-Fi 6 upgrade kit sold by CZ.NIC, which includes the AW7915-NP1 miniPCIE board based on Mediatek MT7915AN, providing 5 GHz Wi-Fi 6 connectivity. With this commit we now support the latest Turris Omnia Wi-Fi 6 Edition Signed-off-by: Jan Jasper de Kroon <jajadekroon@gmail.com>
* mvebu: fill additional info for mvneta tx queue workaround patchTomasz Maciej Nowak2024-02-26
| | | | | | | | Because some still unresolved bugs in this driver, which sprout occasional questions what this patch works around, point to the issue which started this. Being here, fill headers required by git am. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Powered by cgit, Themed by Ted Yin.