aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
* realtek: 5.15: rtl93xx: support 100BASE-T and 10BASE-T MAC modesTobias Schramm2023-12-24
| | | | | | | | | The MAC embedded in rtl93xx switch SoCs needs different mac mode bits set to support 10BaseT and 100BaseT link modes. Set them accordingly. This change has been tested on a ZyXEL XGS1250-12. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* Revert "x86: add support for Mellanox Spectrum SN2000 Switches"Til Kaiser2023-12-23
| | | | | | | | | | | | | | | | | | This reverts commit 3004c20614fdb29732f750417a578274a8ed988e. The commit added the needed packages for the new target to the generic x86_64 image. This results into unwanted modules and firmware files for other x86 devices. Additionally, there is the following error message while booting the image on other x86 devices: [ 8.531720] kmodloader: 1 module could not be probed [ 8.532613] kmodloader: - leds-mlxcpld - 0 For now, the needed packages will have to be selected manually while configuring the image. Signed-off-by: Til Kaiser <til.kaiser@gmx.de>
* kernel: bump 6.1 to 6.1.69John Audia2023-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69 Removed upstreamed: generic/backport-6.1/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1] generic/backport-6.1/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2] generic/backport-6.1/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3] generic/backport-6.1/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4] generic/backport-6.1/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=893597cbabfbc00ee51fd5f73e2028994f49ded6 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=1d82735f4bae954d5ba004994b96baec791f874f 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=4c2ad8e39c62c5288ca31ebf5c30e34f3bd9d044 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=325556d46bfd13a2fa0d304d0625be86821fd683 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=cac1218b32d7b56832dd36f7baf82f123f305a2a Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.144John Audia2023-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.144 Removed upstreamed: generic/backport-5.15/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1] generic/backport-5.15/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2] generic/backport-5.15/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3] generic/backport-5.15/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4] generic/backport-5.15/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=ca75274b17b890e6f6d2951e364360e25f2846e9 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=07ba21627ebbb2c68c357e8d698166c45078d014 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=aa3cc80e8edaa6098b58eb4a613d765496c2dfca 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=4c117984824b4a852a0e0765e5bdea0f1c7d6309 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=404ce6ee69d384096663e3f6987d915090447835 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* sunxi: mark upstreamed patches as suchTianling Shen2023-12-19
| | | | | | Also sort them to start from 001. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* sunxi: remove outdated kernel 5.15 filesTianling Shen2023-12-19
| | | | | | We're on 6.1 now, these files can go. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: bump 5.15 to 5.15.143John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.143 Removed upstreamed: generic/backport-5.15/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-5.15/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.143&id=00beca907a7be61da935bb687f9601420fc5f8a8 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.68John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68 Removed upstreamed: generic/backport-6.1/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.68&id=3759e735562a31e44fee825498f05c06e64b25a8 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* mvebu: fix RTC of IEI-World Puzzle M90x devicesDaniel Golle2023-12-18
| | | | | | | | | The Puzzle devices come with an I2C-connected Epson RX8130 RTC. Disable the (dysfunctional) RTC units of the SoC and add driver kmod-rtc-ds1307 to support the Epson RX8130 instead. Tested-by: Thomas Huehn <thomas.huehn@hs-nordhausen.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport NVMEM changes queued for v6.8Rafał Miłecki2023-12-18
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport upstream brcm_nvram fix for NAND controllerRafał Miłecki2023-12-18
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: 6.1: fix list_count_nodes backport patchChristian Marangi2023-12-15
| | | | | | | | | | Commit 25746a3fa2da ("drm/i915: fix up merge with usb-next branch") was internally applied to the 5.15 patch but wasn0t applied to the backport for kernel 6.1. Apply the same treatement also there to fix compilation warning. Fixes: a14240d384af ("kernel: backport list_count_nodes()") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* rockchip: make SMP affinity of RTL8152 on XHCI more robustFurong Xu2023-12-15
| | | | | | | XHCI bus numbers are assigned dynamically, it may varies among boards, match the device irq name with regexp, drop the hardcoded name. Signed-off-by: Furong Xu <xfr@outlook.com>
* kirkwood: backport fix Ctera C200 V1 ubi part name to 6.1Pawel Dembicki2023-12-15
| | | | | | | | | | | | | | From the original Patch: |In 749237967a12 downstream dts was replaced with upstream accepted |patch. But in upstream version last partition was called "rootfs" |instead "ubi". OpenWrt require "ubi" label for ubi rootfs. |This patch restore proper label. | |Fixes: 749237967a12 ("kirkwood: Replace dtses with upstream accepted") | |Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (patch updated to include 6.1, dropped label properties) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: backport list_count_nodes()Rafał Miłecki2023-12-15
| | | | | | | It's needed by various stuff we backport. That includes NVMEM changes queued for v6.8. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq807x: add support for ZTE MF269Chukun Pan2023-12-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specifications: SoC: Qualcomm IPQ8071A RAM: 512MB of DDR3 Flash1: Eon EN25S64 8MB Flash2: MX30UF2G18AC 256MB Ethernet: 2x 2.5G RJ45 port Phone: 1x RJ11 port (SPI) USB: 1x Type-C 2.0 port WiFi1: QCN5024 2.4GHz WiFi2: QCN5054 5GHz Button: Reset, WPS Flash instructions: 1. Connect the router via serial port (115200 8N1 1.8V) 2. Download the initramfs image, rename it to initramfs.bin, and host it with the tftp server. 3. Interrupt U-Boot and run these commands: tftpboot initramfs.bin bootm 4. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* realtek: Clean up and standardize realtek-poe supportRaylynn Knight2023-12-13
| | | | | | | | | | | | | | | | This patch cleans up and standardizes realtek-poe support for realtek based switches that have supported PoE ports. The power output of switches supported by realtek-poe package can be configured in the 02_network ucidef_set_poe() function. This was missed when some PoE capable switches supported by realtek-poe were added. The realtek-poe package at one point replaced a lua-rs232 based script and some devices were not updated to use the realtek-poe package. Consistently add realtek-poe package to DEVICE_PACKAGES for switches with supported PoE. Signed-off-by: Raylynn Knight <rayknight@me.com>
* ipq807x: fix edgecore EAP102 lan/wanDirk Buchwalder2023-12-13
| | | | | | | | | | | | | | | We have a report in the forum, that lan/wan is non-functional on the EAP102 (https://forum.openwrt.org/t/edgecore-eap102/178449) Fixing that by swapping label and phy-handle of the dp-nodes and updating the lan/wan bmp. Note: the original commiter of the device support seems absent for a long time in the forum and on the OpenWrt github group. Tested-by: Antonio Della Selva <antonio.dellaselva@uniurb.it> Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ipq807x: add Arcadyan AW1000 supportChukun Pan2023-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: Qualcomm IPQ8072A Flash: Toshiba NAND 1GiB RAM: 1 GiB of DDR3 466 MHz Ethernet: 4x 1Gbps + 1x 2.5Gbps WiFi1: QCN5024 2.4GHz ax 4x4 WiFi2: QCN5054 5GHz ax 4x4 Button: WiFi, WPS, Reset Modem: RG500Q-EA USB: 1 x USB 3.0 Power: DC 12V 4A Flash instructions: 1. Download the initramfs image, rename it to initramfs.bin, and host it with tftp server. 2. Interrupt U-Boot and run these commands: tftpboot initramfs.bin bootm 3. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* qualcommax: cleanup whitespace and sort-orderChukun Pan2023-12-13
| | | | | | | Replace blanks with tabs, also sort base-files alphabetically. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* kernel: add support for Toshiba TH58NYG3S0HBAI4Chukun Pan2023-12-13
| | | | | | | | | | | | | | | | | | | | | | Correct oob size from 128 to 256 for Toshiba TH58NYG3S0HBAI4 flash. Since it is not ONFI compliant NAND, the model name cannot be read from anywhere, add a static NAND ID entry to correct this. However, the NAND ID of this flash is inconsistent with the datasheet. The actual NAND ID is only 4 ID bytes, the last ID byte is missing.[1] Maybe this flash is counterfeit, or maybe it's another problem. Another Toshiba flash had the same problem before. Refer to commit a83dc6b ("kernel: move Toshiba-TC58NVG0S3H patch to ipq40xx"), put the patch into qualcommax target to avoid affecting other devices. The patch is verified on Arcadyan AW1000. [1] Datasheet available at (the ID table is on page 50): https://europe.kioxia.com/content/dam/kioxia/newidr/productinfo/datasheet/201910/DST_TH58NYG3S0HBAI4-TDE_EN_31565.pdf Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Robert Marko <robimarko@gmail.com>
* package: kernel: detach of-mdio dependency from stmmac-coreChristian Marangi2023-12-13
| | | | | | | | | | | | | Detach of-mdio dependency from stmmac-core kmod to fix support for x86_64 target. This target doesn't use OpenFirmware infrastructure and stmmac-core for the dwmac-intel driver doesn't depends on it. Add kmod-of-mdio to any other user of stmmac-core as it's not inherit from stmmac-core anymore. Fixes: #14209 Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* package: kernel: move pcs-xpcs from armsr to genericChristian Marangi2023-12-13
| | | | | | | | | | Move pcs-xpcs kmod from armsr modules.mk to generic modules package. Also add additional dependency to x86_64 as stmmac-core it's now used by x86_64 target and depends on this package. Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* rockchip: fix eth1 irq affinityFurong Xu2023-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NanoPi R2S and some other RK3328 boards use RTL8152 as eth1, which is connected to xhci-hcd:usb1 but not xhci-hcd:usb3 |:~# cat /proc/interrupts | CPU0 CPU1 CPU2 CPU3 | 11: 53449 171813 129595 87823 GICv2 30 Level arch_timer | 18: 0 0 0 0 GICv2 94 Level rockchip_usb2phy | 19: 0 0 0 0 GICv2 32 Level ff1f0000.dma-controller | 20: 0 0 0 0 GICv2 33 Level ff1f0000.dma-controller | 21: 4 0 0 0 GICv2 89 Level ttyS2 | 22: 0 0 0 0 GICv2 43 Level ff350800.iommu | 23: 0 0 0 0 GICv2 106 Level ff360480.iommu | 24: 0 1417932 0 0 GICv2 56 Level eth0 | 25: 334 0 0 4422194 GICv2 99 Level xhci-hcd:usb1 | 26: 0 0 0 0 GICv2 48 Level ehci_hcd:usb3 | 27: 0 0 0 0 GICv2 49 Level ohci_hcd:usb2 | 28: 3285 0 0 0 GICv2 69 Level ff160000.i2c | 29: 0 0 0 0 rockchip_gpio_irq 24 Level rk805 | 30: 0 0 0 0 rk805 0 Edge rk805_pwrkey_fall | 35: 0 0 0 0 rk805 5 Edge RTC alarm | 37: 0 0 0 0 rk805 7 Edge rk805_pwrkey_rise | 38: 0 0 0 0 GICv2 90 Level rockchip_thermal | 39: 0 0 0 0 GICv2 72 Edge ff1a0000.watchdog | 40: 2601 0 0 0 GICv2 44 Level dw-mci | 41: 0 0 0 0 rockchip_gpio_irq 0 Edge keys |IPI0: 1559 1208 893 1131 Rescheduling interrupts |[...] Fix 40-net-smp-affinity to match the correct device irq name. Signed-off-by: Furong Xu <xfr@outlook.com>
* ath79: make boot-leds service executableEric J. Anderson2023-12-12
| | | | | | | | | This service was unfunctional due to not having its executable bit set. Fixes #13500. Signed-off-by: Eric J. Anderson <eric.j.ason256@gmail.com>
* imx: enable CONFIG_CPU_FREQ_THERMALLech Perczak2023-12-12
| | | | | | | Without that, imx_thermal fails to initialize on deferred probe, because it fails to register cpufreq cooling device. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* imx: imx7d-pico-pi: add CPU supply nodes to device treeLech Perczak2023-12-12
| | | | | | | Attach sw1a as "cpu-supply" to both CPUs in order to cpufreq driver to prove successfully. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* imx: enable CONFIG_REGULATOR_PFUZE100 globallyLech Perczak2023-12-12
| | | | | | | PFUZE100 series of PMICs are used on boards supported by both subtargets. Enable this for whole i.MX target. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* tools: add ledumon and ledhwbmon packagesFlorian Eckert2023-12-12
| | | | | | | | | | | | ledumon: This program creates a new userspace LED class device and monitors it. For this it es using the kmod-leds-uled.ko kernel module. ledhwbmon: This program monitors LED brightness level changes having its origin in hardware/firmware, i.e. outside of kernel control. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kirkwood: add 6.1 kernel as testingPawel Dembicki2023-12-12
| | | | | | It allow to test 6.1 kernel in Kirkwood. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: 6.1: refresh kernel configPawel Dembicki2023-12-12
| | | | | | Done by 'make kernel_oldconfig'. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: kernel: refresh 6.1 patchesPawel Dembicki2023-12-12
| | | | | | Kernel patches copied from 5.15 need to be refreshed. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: copy config 5.15 to 6.1Pawel Dembicki2023-12-12
| | | | | | Config was just copied. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: copy patches 5.15 to 6.1Pawel Dembicki2023-12-12
| | | | | | | | | | | Simple copy 5.15 patches. Upstreamed patch dropped: 001-5.18-Add-Ctera-C-200-V1-board.patch Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (kirkwoor -> kirkwood in subject) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kirkwood: fix Ctera C200 V1 ubi part namePawel Dembicki2023-12-12
| | | | | | | | | | | In 749237967a12 downstream dts was replaced with upstream accepted patch. But in upstream version last partition was called "rootfs" instead "ubi". OpenWrt require "ubi" label for ubi rootfs. This patch restore proper label. Fixes: 749237967a12 ("kirkwood: Replace dtses with upstream accepted") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* octeon: upgrade to 6.1 kernelChristian Svensson2023-12-12
| | | | | | | | The kernel patches apply with only minor changes. The only other notable change is that octeon-usb has moved from staging and had its config macro renamed from CONFIG_OCTEON_USB to CONFIG_USB_OCTEON_HCD. Signed-off-by: Christian Svensson <blue@cmd.nu>
* kernel: bump 6.1 to 6.1.66John Audia2023-12-12
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.66 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: backport upstream nvmem fix for "fixed-layout"Rafał Miłecki2023-12-12
| | | | | | It replaces a pretty much identical downstream patch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: drop useless uci-defaults compat version scriptChristian Marangi2023-12-12
| | | | | | | | | | | | | | Drop useless uci-defaults compat version script as it's not needed anymore and should have been dropped on DSA conversion. The script was needed for Linksys EA7500 and EA8500 for the kernel space migration. We now handle compat version setting in board.d scripts. Having this script with actually the wrong value (2.0) cause upgrade problem and conflicts with board.d script. Fixes: 337e36e0ef98 ("ipq806x: convert each device to DSA implementation") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: bananapi-r3: add overlay for ReSpeaker 2-mic hatDaniel Golle2023-12-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT overlay to allow using the ReSpeaker 2-mic hat connected to the 26-pin header of the BananaPi BPi-R3. Supported sample formats: S16_LE, S24_LE, S32_LE Supported sample rates: 8/12/16/24/32/48/96/192 kHz | BPi-R3 | ReSpeaker 2-mic Signal | 26-pin | 40-pin ----------+----------+------------------- VCC 5V | 2 | 2 I2C SDA | 3 | 3 I2C SCL | 5 | 5 GND | 6 | 6 PCM CLK | 12 | 12 PCM FS | 15 | 35 PCM DIN | 26 | 38 GND | 25 | 39 PCM DOUT | 22 | 40 Once connected, install the driver and tell U-Boot to apply the DT overlay: opkg kmod-sound-soc-mt7986-wm8960 fw_setenv bootconf_base "config-mt7986a-bananapi-bpi-r3#mt7986a-bananapi-bpi-r3-respeaker-2mics" reboot To setup the ReSpeaker for Stereo out on the Headphone plug: amixer sset 'Right Output Mixer PCM' on amixer sset 'Left Output Mixer PCM' on amixer sset 'PCM Playback -6dB' off amixer sset 'O018 I150_Switch' on amixer sset 'O019 I151_Switch' on amixer sset 'O124 I032_Switch' on amixer sset 'O125 I033_Switch' on amixer sset 'Headphone' 121 amixer sset 'Playback' 255 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: modules: break-out WM8960 codec moduleDaniel Golle2023-12-11
| | | | | | | Package codec module for WM8960 in its own package to be used by more than one target. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport MT7986 audio driverMaso Huang2023-12-11
| | | | | | | | Pick commits adding drivers for audio engine found in MT7986 from Linux 6.6 as well as follow-up fixes from Linux 6.7. Signed-off-by: Maso Huang <maso.huang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.142John Audia2023-12-11
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.142 All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: add support for Adtran SmartRG Bonanza Peak seriesDaniel Golle2023-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Bonanza Peak series are a couple of MT7986-powered 2.5 GBit/s Wi-Fi 6 residential gateway, access point and mesh router products. All of them come with an eMMC to boot from, are powered via USB-C and got a USB 3.0 type-A port. All of them got a Dialog (Renesas) DA14531 Bluetooth module connected via UART. If the device was previously running stock firmware, the BT chip's internal flash has been loaded with firmware and it can be attached using hciattach when using OpenWrt. SOC: MediaTek MT7986A RAM: 2 GiB DDR4 eMMC: 8 GiB Bluetooth: BLE5 (DA14531) Serial: 3.3V level, 115200 8n1 on 4-pin connector * SDG-8612 - Dual-band RJ-45 gateway 2x 2.5G MaxLinear PHY for WAN port 3x 1GE LAN ports via MT7531 switch * SDG-8614 - Dual-band SFP gateway 1x SFP cage with up to 2.5G speed 1x 2.5G MaxLinear PHY for LAN port 3x 1GE LAN ports via MT7531 switch * SDG-8622 - Tri-band mesh router 2x 2.5G MaxLinear PHY The MT7986 2G and 5G are used as 2G and 5G high band. There’s a MT7915 PCIe card for 5G low band. * SDG-8632 - Tri-band mesh router with 6 GHz 2x 2.5G MaxLinear PHY The MT7986 serves the 2G and 6G bands. There’s a MT7915 PCIe card for 5G. Installation via U-Boot serial console: 0. setup TFTP server with IP 192.168.1.10/24, place initramfs image renamed to openwrt.XXX where XXX is the internal product number: SDG-8612: XXX = 412 SDG-8614: XXX = 414 SDG-8622: XXX = 422 SDG-8632: XXX = 432 1. connect to the serial console and power on the device. Interrupt the bootloader by pressing 'st' 2. setenv boot_mode openwrt ; saveenv 3. run boot1 Load firmware via TFTP and write to flash 4. run boot2 Now OpenWrt initramfs should boot 5. upload sysupgrade.bin via scp to /tmp 6. sysupgrade Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: import driver for Adtran SmartRG RGBW LEDDaniel Golle2023-12-10
| | | | | | | Import driver for I2C-connected HolTek MCU controlling the RGBW LED found in Adtran SmartRG devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: hack: support inverted LEDs on MaxLinear GPY211 PHYDaniel Golle2023-12-10
| | | | | | | | Add downstream DT property to setup the PHY LEDs of the MaxLinear GPY211 PHY in such way that the VDD of the LED is driven by the SoC pin rather than the GND (which is the default). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.1: fix patch 814 Add Qualcomm secure QFPROM supportAndrey VOLKOV2023-12-09
| | | | | | | | | | | | | The backported patch is broken, since kernel 6.1 has not 'include/linux/firmware' directory yet. Fix the include to the correct path. Fixes: #14115 Fixes: 52c365f055f6 ("kernel: backport v6.6 nvmem changes") Signed-off-by: Andrey VOLKOV <andrey@volkov.fr> [ improve commit description and title ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: remove mac-address-ascii dts supportRosen Penev2023-12-09
| | | | | | | Deprecated and replaced treewide with mac-base. Remove to avoid modern usage. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: of: remove mac-address-increment support hackRosen Penev2023-12-09
| | | | | | | | The MAC address increment has been replaced by the new "mac-base" NVMEM fixed layout. This old implementation can be removed now. Signed-off-by: Shiji Yang <yangshiji66@qq.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* x86: remove unused 5.15 kernel configs and patchesPascal Coudurier2023-12-09
| | | | | | As we move to 6.1 by default, remove unused 5.15 kernel configs and patches Signed-off-by: Pascal Coudurier <coudu@gmx.com>
Powered by cgit, Themed by Ted Yin.