aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
...
* mediatek: filogic: add Acelink EW-7886CAX supportRafał Miłecki2023-12-05
| | | | | | | | | | | | | | | | | Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point. It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and on-SoC Wi-Fi. There is no printed MAC label (on my unit). My unit came with Mediatek's firmware (based on OpenWrt 21.02) installed. It was possible to simply upgrade using OpenWrt's sysupgrade tool. Another verified upgrade method is using U-Boot (requires UART). During every boot there is "U-Boot Boot Menu". Selecting option "2. Upgrade firmware" allows using U-Boot's tftp client to load and flash factory image. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mpc85xx: allow mapping of cpu1 spin-table pageDavid Bauer2023-12-04
| | | | | | | | | | | The no-map property was incorrectly added, which kept the system-memory available on the WS-AP3825 limited to 190MB. We are allowed to map the page containing the CPU1 spin-table, we are just not allowed to write to it. Fixes: 57d7382cb159 ("mpc85xx: increase available RAM on Extreme Networks WS-AP3825i") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 6.1 to 6.1.65John Audia2023-12-04
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.65 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.141John Audia2023-12-04
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.141 All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* mpc85xx: increase available RAM on Extreme Networks WS-AP3825iDavid Bauer2023-12-03
| | | | | | | | | | | | | The system-mamory size was page-aligned prior to this commit, only enabling to use 192MB of system memory of the 256 available. This was due to the system-memory being manually shrinked to reserve the upper 1MB for the second-core bootpage in the loader as well as the OS. Fix this properly in the loader and in Linux using reserved-memory definitions. This enables the device to use 250MB of system memory. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: remove wireless packages for GL-MT2500David Bauer2023-12-03
| | | | | | | This device does not have wireless hardware, thus we don't need to ship neither hostapd nor wireless drivers. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: make GL-MT2500 image work with U-Boot recoveryDavid Bauer2023-12-03
| | | | | | | | | | | | | | | | | | | | | Append metadata in the special GL.iNet format. This also enables use of the web-based U-Boot recovery. U-Boot-Recovery =============== The GL-MT2500 provides web-based U-Boot recovery. For this, hold the reset button pressed for 5 seconds when attaching power to the device. The LED will blink 5 times. Release the reset button. The OpenWrt sysupgrade image can be installed by navigating to http://192.168.1.1 in a web-browser. The device does not work as a DHCP server, so manual IP configuration is required. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: remove kernel build-directives for GL-MT2500David Bauer2023-12-03
| | | | | | | The build-directives for the GL-MT2500 are not required, as the default ones produce working images. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: add missing eMMC packages for GL-MT2500David Bauer2023-12-03
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix some dtc warningsRosen Penev2023-12-02
| | | | | | Mostly missing/wrong addresses. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: backport fixes for realtek r8152Marty Jones2023-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes issues with RTL8156 2.5G USB adapters - # ethtool eth1 Settings for eth1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 2500Mb/s Duplex: Half Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Current message level: 0x00000007 (7) drv probe link Link detected: yes - # - r8152: break the loop when the budget is exhausted - r8152: Block future register access if register access fails - r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE - r8152: add vendor/device ID pair for D-Link DUB-E250 - r8152: try to use a normal budget - r8152: set bp in bulk - r8152: adjust generic_ocp_write function - r8152: fix the autosuspend doesn't work - r8152: Add __GFP_NOWARN to big allocations - r8152: reduce the control transfer of rtl8152_get_version() - r8152: remove rtl_vendor_mode function - r8152: avoid to change cfg for all devices - r8152: add USB device driver for config selection - r8152: use napi_gro_frags - cdc_ether: no need to blacklist any r8152 devices - cdc_ether: add u-blox 0x1313 composition Build system: x86_64 Build-tested: bcm2711, rockchip, x86/64 Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64 Signed-off-by: Marty Jones <mj8263788@gmail.com>
* mediatek: filogic: Update bootcount init script permissionsChen Minqiang2023-12-02
| | | | | | | | Change permissions of the bootcount init script from old mode 100644 to new mode 100755 to ensure its executability. Fixes: 6cc14bf66aa9 ("filogic: support Telenor branded ZyXEL EX5700") Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ipq40xx: update ASUS RT-AC58U leds DTS nodesChristian Lamparter2023-12-02
| | | | | | | | | | | | - use color, function, function-enumerator properties. - removes the label properties from LED nodes. - add panic-indicator to the blue power/status LED. Note: yes this brings the combined LAN/"switch" LED sort of back, though I fully admit, it's a bit jank. Do you know a better option? then please tell/make a PR! Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: enable CONFIG_LED_TRIGGER_PHY for AC42UChristian Lamparter2023-12-02
| | | | | | | The AC42U already had PHY Triggers in the DTS. We are probably going to use them at some point. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* generic: add more DT LED color and function definitionsShiji Yang2023-12-02
| | | | | | | Openwrt supports hundreds of devices. These newly added LED colors and functions can help developers better describe LED indicators. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* qoriq: pad rootfs with zerosRussell Senior2023-12-02
| | | | | | | | | | | | | Presently, sysupgrade -n does *not* reset the overlayfs, retaining unwanted filesystem contents. Adding PADDING=1 in front of gen_image_generic.sh in image/Makefile ensures that the overlayfs is recreated on firstboot. Fixes: 080a769b4da8 ("qoriq: new target") Signed-off-by: Russell Senior <russell@personaltelco.net> [add Fixes tag, rewrite commit subject and message to respect line length] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* qoriq: set compat_version in board.dRussell Senior2023-12-02
| | | | | | | | | | | | | | | | | | | | | Currently, sysupgrade without the -n option complains: # sysupgrade -v tmp/openwrt-qoriq-generic-watchguard_firebox-m300-squashfs-sysupgrade.img.gz upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). upgrade: Kernel switched to FIT uImage. Update U-Boot environment. upgrade: Reading partition table from bootdisk... upgrade: Extract boot sector from the image upgrade: Reading partition table from image... Image check failed. So, add the missing 05_compat-version to /etc/board.d/ to allow sysupgrade to save config without using -f. Fixes: c4b499bc03ab ("qoriq: use FIT uImage for Firebox M300 kernel") Signed-off-by: Russell Senior <russell@personaltelco.net> [drop invalid copyright header, add SPDX license header, shorten commit subject, add fixes tag] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* x86: Add kmod-dwmac-intelHauke Mehrtens2023-12-02
| | | | | | | This adds the Intel Ethernet driver for the Intel Quark/EHL/TGL chips. Fixes: #13994 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* armsr: Move kmod-stmmac-core to common placeHauke Mehrtens2023-12-02
| | | | | | | Move the kmod-stmmac-core package to the common place to share it with x86 later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: add support for Confiabits MT7981Luis Mita2023-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Confiabits MT7981 is a Wi-Fi 6 router based on MediaTek MT7981. Specification: - SoC: MediaTek MT7981B - CPU: 2x 1.3 GHz Cortex-A53 - Flash: 128 MiB SPI NAND - RAM: 256 MiB - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN, 802.11ax) - Ethernet: 4x 10/100/1000 Mbps MT7531AE (3xLAN, 1xWAN) - USB 2.0 port - Buttons: 1 Reset button, 1 Mesh button. - LEDs: 7x light-blue, 2x warm-white - Serial console: internal 4-pin header, 115200 8n1 - Power: 12 VDC, 1.5 A MAC addresses in stock firmware and in this commit: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 00:0c:43:xx:xx:e1 | label+1 | | LAN | 00:0c:43:xx:xx:e0 | label | | WLAN 2g | 00:0c:43:xx:xx:e0 | label | | WLAN 5g | 02:0c:43:xx:xx:e0 | | +---------+-------------------+-----------+ The label MAC was found in 'Factory', 0x4 Installation: The stock firmware is OpenWrt-based. If you can reach LuCI or SSH, just use the sysupgrade image with the 'Keep settings' option turned off. Signed-off-by: Luis Mita <luis@luismita.com>
* target: Make TARGET_SERIAL independent of GRUB configurationHauke Mehrtens2023-11-29
| | | | | | | | | | | | | GRUB_SERIAL is also used for the default serial on the target and not only in grub. When no grub was build it was not available and the build fails. Rename GRUB_SERIAL to TARGET_SERIAL and make it always available on x86 and armsr targets. Fixes: #14063 Fixes: b10768476f9d ("x86,armsr: interpolate GRUB_SERIAL into /etc/inittab") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.140John Audia2023-11-29
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.140 Removed upstreamed: mvebu/patches-5.15/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.140&id=06d320ca170b4e59bb261e2ce3ffe84e9154d42b Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.64John Audia2023-11-29
| | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64 Removed upstreamed: ixp4xx/patches-6.1/0001-mtd-cfi_cmdset_0001-Byte-swap-OTP-info.patch[1] mvebu/patches-6.1/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[2] qualcommax/patches-6.1/0026-v6.7-clk-qcom-ipq8074-drop-the-CLK_SET_RATE_PARENT-flag-f.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=3b93096d29c5b9ca2af94be4ee9949c1767acf17 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=b3fd9db79e30d5eb5f76ef1f5b7e4f444af574ea 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=877080a3490102da26b8d969588159b2385f739e Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: add kmod-usb3 to default package set of the ZBT-Z8102AXDaniel Golle2023-11-29
| | | | | | | Include XHCI USB drivers on the ZBT-Z8102AX router, the drivers are required to be able to use the USB-connected M.2 slots for 4G/5G modems. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: copy config for Acer Predator W6David Bauer2023-11-27
| | | | | | Config was previously not copied on sysupgrade. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: add support for GL.iNet GL-MT2500David Bauer2023-11-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: MediaTek MT7981BA RAM: 1GB DDR4 (NANYA NT5AD512M16C4-JR) MMC: 8GB eMMC (Samsung 8GTF4R) ETH: 1000Base-T LAN (ePHY) 2500Base-T WAN (MaxLinear GPY211C) BTN: 1x Reset Button LED: System (blue/white) VPN (white) USB: 1x USB-A (USB 3.0) UART: 115200 8N1 - Pinout on board next to LAN port Don't connect 3.3V! Known Issues ------------ U-Boot vendor recovery does not seem to accept any images, neither GL.iNet images nor OpenWrt images. Recovery requires serial access! Installation ------------ Upload the OpenWrt sysupgrade image to the Gl.iNet Web-UI. Make sure to not retain existing settings. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: require image metadataDavid Bauer2023-11-27
| | | | | | | | | All devices in the rockchip target have appended image-metadata. Enforce the presence of this metadata to avoid flashing incomplete images. This is the de-facto standard for almost all OpenWrt targets. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fortinet-fap-221-b: convert to nvmem-layoutLech Perczak2023-11-27
| | | | | | | | | | | | | Now that MAC address parser supports the hex format (without delimiters), use the canonical MAC address stored in U-boot partition. Get rid of the userspace adjustments which are no longer necessary. While at that, move the mac-base to the common part, as it is again exactly the same in both models. And convert ART partition too - keep that one separate, as calibration data length differs between the models. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: fortinet-fap-220-b: convert to nvmem-layoutLech Perczak2023-11-27
| | | | | | | | | Now that MAC address parser supports the hex format (without delimiters), use the canonical MAC address stored in U-boot partition. Get rid of the "mac-address-increment" binding. While at that, convert ART partition too. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: fortinet-fap-220-b: fix WLAN MAC addressesLech Perczak2023-11-27
| | | | | | | | Addresses were swapped compared to the factory firmware. In addition to that, one of them was shifted by -1. Fix that by setting wlan0 MAC offset to 9, and wlan1 MAC offset to 2. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* x86 64: Add new device Cordoba Edge PlatformXiaojun Liu2023-11-26
| | | | | | | | | | | | Add new device Cordoba Edge Platform hardware specifications: CPU - Intel Atom C3000 Ethernet - 2 10Gbps ixgbe SPF+ 2 1Gbps ixgbe RJ45/SPF 4 2.5Gbps igc RJ45 WiFi - mt7915e LED - 3 multicolor(red|blue|green) LEDs Signed-off-by: Xiaojun Liu <xiaojun.liu@silicom.co.il>
* rockchip: add NanoPi R5C supportTianling Shen2023-11-26
| | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: add NanoPi R5S supportTianling Shen2023-11-26
| | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Tested-by: Packet Please <pktpls@systemli.org> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: armv8: broaden boardnameTianling Shen2023-11-26
| | | | | | Now we have rk356x support :-) Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: enable drivers for rk356xTianling Shen2023-11-26
| | | | | | | Enable all necessary drivers for the rk356x SoCs, including PHY, SCMI, SPI etc. Also backport 2 upstream patches for sdhci fixes. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: remove kernel 5.15 patches and configTianling Shen2023-11-26
| | | | | | As we switched to kernel 6.1, these files can go. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: switch to kernel 6.1Tianling Shen2023-11-26
| | | | | | Required by the following rk3568 support. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: move image generation command to defaultTianling Shen2023-11-26
| | | | | | | | It's applicable for all devices so move it to default to reduce redudant code. Addtionally introduce a new variable `BOOT_SCRIPT` to allow custom boot script (if necessary). Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ipq40xx: enable UBI size checks for some Linksys NAND devicesTony Ambardar2023-11-26
| | | | | | | | Add correct NAND_SIZE in device definitions for EA6350v3, EA8300, MR8300, WHW01 and WHW03v2, to enable improved image size checks wrt UBI reserved blocks on NAND devices. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* image: use helper function for size unitsTony Ambardar2023-11-26
| | | | | | | | Add the make function 'exp_units' for helping evaluate k/m/g size units in expressions, and use this to consistently replace many ad hoc substitutions like '$(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE)))' in makefiles. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: fix typo in Linksys WHW01 image definitionTony Ambardar2023-11-26
| | | | | | | | Use lower-case "k" in IMAGE_SIZE for Linksys WHW01, permitting proper unit conversions in build recipes (e.g. 75776k -> 75776*1024). Fixes: 2a9f3b7717 ("ipq40xx: fix up Linksys WHW01 board name, device definition") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ath79: add support for D-link DAP-1720 A1Rani Hod2023-11-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | D-Link DAP-1720 rev A1 is a mains-powered AC1750 Wi-Fi range extender, manufactured by Alpha Networks [8WAPAC28.1A1G]. (in square brackets: PCB silkscreen markings) Specifications: * CPU (Qualcomm Atheros QCA9563-AL3A [U5]): 775 MHz single core MIPS 74Kc; * RAM (Winbond W9751G6KB-25J [U3]): 64 MiB DDR2; * ROM (Winbond W25Q128FV [U16]): 16 MiB SPI NOR flash; * Ethernet (AR8033-AL1A PHY [U1], no switch): 1 GbE RJ45 port (no PHY LEDs); * Wi-Fi * 2.4 GHz (Qualcomm Atheros QCA9563-AL3A [U5]): 3x3 802.11n; * 5 GHz (Qualcomm Atheros QCA9880-BR4A [U9]): 3x3 802.11ac Wave 1; * 3 foldable dual-band antennas (U.fl) [P1],[P2],[P3]; * GPIO LEDs: * RSSI low (red/green) [D2]; * RSSI medium (green) [D3]; * RSSI high (green) [D4]; * status (red/green) [D5]; * GPIO buttons: * WPS [SW1], co-located with status LED; * reset [SW4], accessible via hole in the side; * Serial/UART: Tx-Gnd-3v3-Rx [JP1], Tx is the square pin, 1.25mm pitch; 125000-8-n-1 in U-boot, 115200-8-n-1 in kernel; * Misc: * 12V VCC [JP2], fed from internal 12V/1A AC to DC converter; * on/off slide switch [SW2] (disconnects VCC mechanically); * unpopulated footprints for a Wi-Fi LED [D1]; * unpopulated footprints for a 4-pin 3-position slide switch (SW3); MAC addresses: * Label = LAN; * 2.4 GHz WiFi = LAN; * 5 GHz WiFi = LAN+2; Installation: * `factory.bin` can be used to install OpenWrt from OEM firmware via the standard upgrade webpage at http://192.168.0.50/UpdateFirmware.html * `recovery.bin` can be used to install OpenWrt (or revert to OEM firmware) from D-Link Web Recovery. To enter web recovery, keep reset button pressed and then power on the device. Reset button can be released when the red status LED is bright; it will then blink slowly. Set static IP to 192.168.0.10, navigate to http://192.168.0.50 and upload 'recovery.bin'. Note that in web recovery mode the device ignores ping and DHCP requests. Note: 802.11s is not supported by the default `ath10k` driver and firmware, but is supported by the non-CT driver and firmware variants. The `-smallbuffers` driver variant is recommended due to RAM size. Co-developed-by: Anthony Sepa <protectivedad@gmail.com> Signed-off-by: Rani Hod <rani.hod@gmail.com>
* ath79: ar: convert to mac-baseRosen Penev2023-11-25
| | | | | | Replacement for deprecated mac-address-increment Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: ar: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Will allow removing deprecated mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: tp9343: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Allows getting rid of deprecated mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: qcn: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Allows getting rid of deprecated mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: qca: remove mac-address-incrementRosen Penev2023-11-25
| | | | | | nvmem-layout allows removal Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: qca: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Allows replacing mac-address-increment with mac-base. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: mikrotik: fix dts warningsRosen Penev2023-11-25
| | | | | | property has invalid length Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: mt7621: nix mac-address-incrementRosen Penev2023-11-26
| | | | | | nvmem-layout allows removal Signed-off-by: Rosen Penev <rosenp@gmail.com>
Powered by cgit, Themed by Ted Yin.