aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
...
* bmips: dts: remove unneeded cferom aliasÁlvaro Fernández Rojas2024-01-18
| | | | | | | This is no longer needed after nvmem-layout changes. Same as 6f328dfe19 for NAND devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.15 to 5.15.147John Audia2024-01-17
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.147 Manually rebased: generic/backport-5.15/005-v5.17-01-Kbuild-use-Wdeclaration-after-statement.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: ksmbd: only v2 leases handle the directoryChen Minqiang2024-01-17
| | | | | | | | This backport a fix for ksmbd. Refer: https://github.com/namjaejeon/ksmbd/issues/469 Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* mediatek: refresh patches-6.1Daniel Golle2024-01-17
| | | | | | | | Refresh patches for Linux 6.1 which no longer apply cleanly after adding patches to fix ethernet rx hang issue on MT7981/MT7986. Fixes: ede34465de ("mediatek: fix ethernet rx hang issue on MT7981/MT7986") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: mt7621: convert Linksys devices EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | | | | | -+-----------------------------+- | Model | NIC | -+-----------------------------+- | EA6350 v4 | MT7603 + MT7613 | -+-----------------------------+- | EA7300 v2 | MT7603 + MT7615 | -+-----------------------------+- | Others | MT7615 *2 | -+-----------------------------+- Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: mt7621: convert NETGEAR devices EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | | | -+------------------------------+- | Model | NIC | -+------------------------------+- | chj series | MT7603 + MT7615 | -+------------------------------+- | bzv series | MT7615 *2 | -+------------------------------+- Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: mt7621: convert Wavlink devices EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | | | -+------------------------------+- | Model | NIC | -+------------------------------+- | WL-WN531A6 | MT7603 + MT7615 | -+------------------------------+- | WL-WN533A8 | MT7615 *2 | -+------------------------------+- Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: mt7621: convert Ubiquiti devices EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | -+-------------------------+- | Model | NIC | -+-------------------------+- | All | MT7603 + MT7615 | -+-------------------------+- Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: mt7621: convert I-O DATA devices EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | | | -+-------------------------------------------+- | Model | NIC | -+-------------------------------------------+- | WN-DX1167R/WN-AX1167GR2 | MT7615D | -+-------------------------------------------+- | WN-AX2033GR/WN-DX2033GR | MT7603 + MT7615 | -+-------------------------------------------+- Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: mt7621: convert Xiaomi devices EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | | | | | -+---------------------------+- | Model | NIC | -+---------------------------+- | AC2100 | MT7603 + MT7615 | -+---------------------------+- | MI4A V2 | MT7603 + MT7613 | -+---------------------------+- | Others | MT7603 + MT7612 | -+---------------------------+- Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: mt7621: convert MT7915 EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | | | | Some MT7915 calibration data consists of two parts. The first part "eeprom" size is 0xe00. The second part "precal" size is 0x19c10. Though some devices may not have precal data, it's better to assume that precal data exists as no users/developers confirm it. On the other hand, some devices definitely do not contain precal data because the EEPROM partition size is smaller than the precal NVMEM cell size. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mediatek: fix ethernet rx hang issue on MT7981/MT7986Felix Fietkau2024-01-16
| | | | | | Add patches by Lorenzo/Daniel to use QDMA instead of ADMAv2 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: DTS format fixup for Fortinet FAP-421EChristian Marangi2024-01-16
| | | | | | Small clanup and fixup for DTS format for Fortinet FAP-421E. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* layerscape: refresh patches-6.1Daniel Golle2024-01-16
| | | | | | | | | Patches no longer cleanly apply after commit c2c741ccce ("generic: 6.1: initial backport of at803x PHY driver cleanup"). Refresh patches to address that. Fixes: c2c741ccce ("generic: 6.1: initial backport of at803x PHY driver cleanup") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bmips: drop patches/config for kernel 5.15Álvaro Fernández Rojas2024-01-16
| | | | | | Drop patches/config for kernel 5.15 now that they are not used anymore. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: move to kernel 6.1 by defaultÁlvaro Fernández Rojas2024-01-16
| | | | | | Move bmips to kernel 6.1 by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dts: remove unneeded cfe aliasÁlvaro Fernández Rojas2024-01-16
| | | | | | This is no longer needed after nvmem-layout changes. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6328: add Innacomm W3400V6Sieng-Piaw Liew2024-01-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Innacomm W3400V6 is an xDSL B/G wireless router based on Broadcom BCM6328 SoC. SoC: Broadcom BCM6328 CPU: BMIPS4350 V8.0, 320 MHz, 1 core Flash: SPI-NOR 8MB, MX25L6406E RAM: 64 MB Ethernet: 4x 10/100 Mbps Switch: Integrated Wireless: 802.11b/g, BCM4312 LEDs/Buttons: 9x / 2x Flash instruction, web UI: 1. Set a static IP on your computer compatible with 192.168.1.1, i.e 192.168.1.100. 2. Connect the ethernet cable from your computer to the router. 3. Make sure the router is powered off. 4. Press the reset button, don't release it yet! 5. While pressing reset, power on the router. 6. Wait 10 seconds or more. Note: The power LED is red at first then turns to solid green when ready. 7. Release the reset button. 8. Browse to 192.168.1.1 9. Select .bin file. 10. Upgrade the image. 11. Wait for it to reboot. Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com> [Fix cfe nvmem-layout and pinctrl_leds indentation] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: 6.1: turn on cpu erratum for A72 and disable A53Yangyu Chen2024-01-16
| | | | | | | | The original configuration might be copied from bcm2710 which uses cortex A53 rather than A72 in BCM2711, without errata might be harmful to system stability and security. Signed-off-by: Yangyu Chen <cyy@cyyself.name>
* bcm27xx: Remove unneeded kernel patchHauke Mehrtens2024-01-16
| | | | | | | | | This problem was fixed upstream in a different way, see: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-6.1.y&id=f434703fb893ddffcdbc1eec7646ce321e1190a8 Remove this now obsolete patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: drop PSGMII PHY patchChristian Marangi2024-01-16
| | | | | | | | Drop PSGMII PHY patch as it has been moved to generic in preparation for the PHY driver to be also used for ipq807x SoC as the same PHY is also used there. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport FIELD_PREP_CONST patchChristian Marangi2024-01-15
| | | | | | | | | | Backport FIELD_PREP_CONST patch needed for at803x backport patches to correctly compile and work. This MACRO is needed to treat values derived from FIELD_PREP usage as const to be used by switch case or other needed usage. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: Stabilize LAN 2 MAC address, interface orderingBryan Berg2024-01-15
| | | | | | | | | | | | | | | Part 1 of #13629 split. * Sets the LAN 2 MAC address in the DTS by deriving it from LAN 1's address. The factory OS derives this from the `eth1addr` u-boot env variable, but the nvmem_u-boot-env driver doesn't support parsing MAC addresses from fields other than `ethaddr`. But for all of the device samples I've checked (~10) it derives the correct MAC. * Updates 02_network to ensure that interfaces are assigned to roles correctly and consistently. Signed-off-by: Bryan Berg <bdb@north-eastham.org>
* generic: 6.1: initial backport of at803x PHY driver cleanupChristian Marangi2024-01-15
| | | | | | | | | | | Initial backport of at803x PHY driver cleanup. This is in preparation for split and addition of new PHY Family based on at803x needed for ipq807x and other IPQ Series SoC. Other affected patch are automatically refreshed with make target/linux/refresh Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: renumber MediaTek SGMII PCS patchChristian Marangi2024-01-15
| | | | | | | Renumber MediaTek SGMII PCS patch to make space for upcoming at803x backport patches. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* rtl838x: debugfs use constants from mach-rtl83xx.hPeter Körner2024-01-15
| | | | | | | The register constants were duplicated in net/dsa/rtl83xx/debugfs.c and asm mach-rtl838x/mach-rtl83xx.h. This commit removes this duplication. Signed-off-by: Peter Körner <git@mazdermind.de>
* rtl838x: fix RTL838X_LED_SW_CTRL definitionPeter Körner2024-01-15
| | | | | | | | According to https://svanheule.net/realtek/maple/register/led_sw_ctrl and also drivers/net/dsa/rtl83xx/debugfs.c LED_SW_CTRL on the RTL838X should be 0xa00c not 0x0128. Please note, that is is 0x0128 on the RTL8390/cypress SOC family. Signed-off-by: Peter Körner <git@mazdermind.de>
* rtl931x: reformat broken indentationPeter Körner2024-01-15
| | | | | | | the given code-format did not correctly express the condition and made the code harder to read then necessary. Signed-off-by: Peter Körner <git@mazdermind.de>
* mediatek: GL-MT6000: Change LED colorsThomas Schröder2024-01-15
| | | | | | | | | | | | | | | | | | Fine tuning PR: openwrt/openwrt#14355 Ref: 5a82bb909bf1 ("mediatek: GL-MT6000: Add missing LED state definitions") As the only LED is using white in the stock firmware when the device is running and blue for the bootloader I suggest following changes: - Using blue for the BL and preinit+failsafe - White for normal operation (like the original FW) and sysupgrade With this changes it's clear by looking to the LED in which operation mode the device is and a possible BL stuck can be seen easily. Tested with [GL-MT6000](https://openwrt.org/toh/gl.inet/gl-mt6000). Signed-off-by: Thomas Schröder <tschroeder_github@outlook.com> Tested-by: Hannu Nyman <hannu.nyman@iki.fi>
* ipq807x: prpl-haze: enable LED driver on device treeCheWei Chien2024-01-15
| | | | | | | Enable LED driver LP5562 on HAZE device tree and include its kernel module package on default package for HAZE. Signed-off-by: CheWei Chien <chewei.chien@wnc.com.tw>
* ipq806x: add support for Fortinet FAP-421EJinGen Lim2024-01-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8064 RAM: 235MB Flash: 128MB NAND (Micron MT29F1G08ABBDAH4) 32MB SPI-NOR (Spansion FL256SAIFRO) WLAN2: Qualcomm Atheros QCA9980 WLAN5: Qualcomm Atheros QCA9980 ETH: LAN1 - Atheros AR8035 LAN2 - Atheros AR8033 USB: USB-A, 2.0 LED: Power (yellow/amber) LAN1 (yellow/amber) LAN2 (yellow/amber) WLAN2G (yellow) WLAN5G (yellow) BTN: Reset Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage MAC Address: LAN1 (label) at APPSBL partition LAN2: label + 1 WLAN2: label + 8 WLAN5: label + 16 Installation ------------ Connect to the RJ45 console (TTL) Connect LAN1 to host, set host ip as 192.168.1.10 Start a tftp server to serve the initramfs image Open console connection (9600n8) Connect power through the DC jack `Hit any key to stop autoboot: 5`: press any key `Enter G,Q,or H:`: press `K` to access the hidden option `Enter password:`: `fap22b1!$` to access a limited u-boot console `(FAP) #`: `tftpboot your_initramfs_image_name.itb` `(FAP) #`: `bootm` Once OpenWrt has booted, install the firmware through sysupgrade Signed-off-by: JinGen Lim <openwrt@sn.sg>
* ipq807x: use devinfo MAC for Linksys MX4200Paweł Owoc2024-01-15
| | | | | | Some devices (MX42CF) have a wrong MAC address configuration. The correct one is located only on the devinfo partition. Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
* ipq807x: fix whitespace usagePaweł Owoc2024-01-15
| | | | | | Replace with tab and remove unused whitespaces Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
* imagebuilder: copy from buildroot only target/linux/generic and ↵a-gave2024-01-15
| | | | | | | | | | | | target/linux/<target> to reduce the size This reduces the size of a single imagebuilder by about 40MB In example for the target ath79 it would be the sum of generic and <target> directories, so about 16MB, instead of the whole size of the target directory, about 53MB: 11M target/linux/generic/ 3.9M target/linux/ath79/ Signed-off-by: a-gave <agave@dracaena.it>
* mediatek: TOTOLINK A8000RU: add missing usb3 packageChukun Pan2024-01-14
| | | | | | This device has a usb 3.0 port, so add it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: fixes typo for spi propertiesChukun Pan2024-01-14
| | | | | | Same as commit 3674689, correct 'buswidth' to 'bus-width'. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: YunCore AX835: convert to nvmem-layoutChukun Pan2024-01-14
| | | | | | | The nvmem-cells is deprecated. Also simplify mac address settings. Fixes: b4086f4 ("mediatek: add support for YunCore AX835") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: Cudy WR3000: simplify mac address setupChukun Pan2024-01-14
| | | | | | | | The mac address of the network port under the switch is the same as the corresponding gmac by default, so there is no need to repeat the setting. Compile test only. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: Cetron CT3003: move mac address setup to dtsChukun Pan2024-01-14
| | | | | | | It looks like we can put the mac address setting into the device tree. Compile test only. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: refresh kernel configChukun Pan2024-01-14
| | | | | | | Refresh kernel config with 'make kernel_oldconfig'. Also disable the useless rtl8367s gsw driver. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: mt7622: refresh kernel configChukun Pan2024-01-14
| | | | | | Refresh kernel config with 'make kernel_oldconfig'. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* realtek: rtl838x: add Netgear GS110TUP v1 supportJacob Potter2024-01-13
| | | | | | | | | | | | | | | | | | | | | | The GS110TUP v1 is a managed switch similar to the GS110TPP v1, but with port 10 as SFP instead of RJ-45 and a total budget of 240 watts. Ports 1-4 support 60-watt 802.3bt PoE and ports 5-8 support 30-watt 802.3at. The flash layout of the two switches are identical, and the U-Boot configurations are the same except for having a different magic number, so installation can be done via the same U-Boot method. The following command will be needed to enable the port LEDs as per https://forum.openwrt.org/t/72510/51 : fw_setenv bootcmd "rtk network on; boota" Additionally, port 9 (1000base-T from a separate QSGMII PHY) does not function without this. Port 10 was not tested as no SFP module was available. Signed-off-by: Jacob Potter <jacob@j4cbo.com> [rebase on merged flash layout] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: rtl838x: join Netgear GSxxx flash layoutsSander Vanheule2024-01-13
| | | | | | | | | | Flash layouts for GS108Tv3, GS110TPPv1, GS308Tv1 and GS310TPv1 are almost identical, except for the uimage header magic. Move the flash layout to the common dtsi, and only place the magic value in the device dts files. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: read back reset registerDavid Bauer2024-01-11
| | | | | | | | | | | | | | | | | Read back the reset register in order to flush the cache. This fixes spurious reboot hangs on TP-Link TL-WDR3600 and TL-WDR4300 with Zentel DRAM chips. This issue was fixed in the past, but switching to the reset-driver specific implementation removed the cache barrier which was previously implicitly added by reading back the register in question. Link: https://github.com/freifunk-gluon/gluon/issues/2904 Link: https://github.com/openwrt/openwrt/issues/13043 Link: https://dev.archive.openwrt.org/ticket/17839 Link: f8a7bfe1cb2c ("MIPS: ath79: fix system restart") Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: mt76x8: add support for TP-Link RE365 v1Tomasz Maciej Nowak2024-01-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE365 is a wireless range extender, hardware-wise resembles RE305 with slight changes regarding buttons and LEDs. Specification SoC: MediaTek MT7628AN RAM: 64 MiB DDR2 Flash: 8 MiB SPI NOR WiFi: 2.4 GHz 2T2R integrated 5 GHz 2T2R MediaTek MT7612EN conncted to PCIe lanes Ethernet: 1x 10/100 Mbps integrated LEDs: 6x GPIO controlled Buttons: 4x GPIO controlled UART: row of 4 holes marked on PCB as J1, starting count from white triangle 1. VCC (3.3V), 2. GND, 3. RX, 4. TX baud: 57600, parity: none, flow control: none Installation 1. Open web management interface. 2. Go to Settings > System Tools > Firmware upgrade. 3. Select "Browse" and select the OpenWrt image with factory.bin suffix. 4. After selecting "Upgrade" firmware writing process will start. 5. Wait till device reboots, power LED should stay solid when it's fully booted, then it's ready for configuration through LAN port. Additional information With how device manufacturer patrtitioned the flash memory, it's possible that with default packages set, initial factory.bin image won't be created. In such case, try to reduce packages amount or use older release for initial conversion to OpenWrt. Later You can use sysupgrade.bin image with full set of packages because OpenWrt uses unpartitioned flash memory space unused by vendor firmware. Reverting to vendor firmware involves converting firmware using tplink-safeloader with -z option (can be found in ImageBuilder or SDK) and forcibly applying converted firmware as sysupgrade. Known issues WARNING: after removing casing of the device one is exposed to high voltage and is in a risk of being electrocuted. Caution when interfacing whith bootloader, saving its environment either by issuing "saveenv" or selecting option "1: Load system code to SDRAM via TFTP." in boot menu, any of those will lead to overwriting part of kernel. This will lead to need of firmware recovery. The cause of this issue is bootloader having environment offset on flash at 0x40000, while kernel starts from 0x20000. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> [Wrap long line in DTS] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* rtl83xx: dsa: reset PVID to 1 instead of 0Harshal Gohel2024-01-09
| | | | | | | | | | | | | | | Before, PVID is reset for all ports and goes out of bounds. Also, PVID is later changed by dsa configuration by `ip link` and `bridge vlan` commands, this does not change the CPU port PVID and CPU PVID stays 0. It does not allow sending packets from OpenWrt to any connected devices unless default configuration is changed This change iterates up to and including cpu_port and sets default PVID to 1. For lan* ports PVID can be configured with `ip link` and `bridge vlan` commands Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl93xx: dsa: Fix 802.1QinQ for trunk portsHarshal Gohel2024-01-09
| | | | | | | | | | | | | | | | | Fix incorrect register value being set for VLAN_PORT_FWD Before, the 0b1111 would be set for the register which means outgoing packets would receive an extra tag, corresponding to the PVID of the port. On untagged ports, this meant outgoing packets with a single tag. On tagged ports, this meant outgoing QinQ packets, where the inner tag was either the PVID of the untagged ingress port, or the already assigned original (single) tag. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl83xx: dsa: Clear duplex bit correctlyHarshal Gohel2024-01-09
| | | | | | | | Without this, luci shows 10M full duplex when there is no link. So explicitly set half duplex and unknown speed. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl930x: Rework per port LED configurationHarshal Gohel2024-01-09
| | | | | | | | | | | | | | | | Use led_setX to determine number of LEDs per port. Introduce macros to calculate register value and shift for particular LED in a particular set. Problem with previous implementation is that it uses is10G status to determine leds per port. However with usxgmii, driver sets 10g, 5g and 2.5g so even though there are only 2 leds per port it selects 4 leds per port This implementation relies on configured led_set node. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl83xx: dsa: Do nothing when vid 0Harshal Gohel2024-01-09
| | | | | | | Following other dsa drivers, vid 0 is no-op Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Powered by cgit, Themed by Ted Yin.