aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
...
* mediatek: cleanly backport and add fix for I2C driverDaniel Golle2023-05-27
| | | | | | | | | Pick accepted patches from upstream Linux tree instead of having to maintain our slightly different downstream patches. Import pending patch fixing I2C on MT7981 by making sure all clocks are enabled before accessing I2C registers. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: add kernel tag to backport patchNick Hainke2023-05-26
| | | | | | | | In the previous commit, the kernel tag was not added when adding the backport. Fixes: 537624db39a9 ("generic: backport missing helper for phy interfaces") Signed-off-by: Nick Hainke <vincent@systemli.org>
* generic: backport missing helper for phy interfacesNick Hainke2023-05-26
| | | | | | | | | | | | | | | | | | | The function was defined before in the patch "hack-5.15/795-backport-phylink_pcs-helpers.patch". However, the hack did not move to 6.1. Instead of using the hack do the backport of upstream accepted version. Fixes errors in the form of: make[8]: Entering directory '/home/nick/openwrt/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-6.1.29' CC drivers/net/pcs/pcs-mtk-lynxi.o drivers/net/pcs/pcs-mtk-lynxi.c: In function 'mtk_pcs_lynxi_config': drivers/net/pcs/pcs-mtk-lynxi.c:160:30: error: implicit declaration of function 'phylink_get_link_timer_ns' [-Werror=implicit-function-declaration] 160 | link_timer = phylink_get_link_timer_ns(interface); | ^~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: fa79baf4a6e2 ("generic: copy backport, hack, pending patch and config from 5.15 to 6.1") Signed-off-by: Nick Hainke <vincent@systemli.org>
* ramips: mark patches accepted upstreamNick Hainke2023-05-26
| | | | | | Add kernel tags to the patches that got accepted upstream. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: fix, clean and unify SD card image generationDaniel Golle2023-05-26
| | | | | | | Make sure sub-images on the SD card are size-checked, allow generating SD card without squashfs and/or initramfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: disable wireless extension support for 6.1Felix Fietkau2023-05-26
| | | | | | It is unused Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq807x: add support for Compex WPQ873Antti Nykänen2023-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Compex WPQ873 is a development board with two M.2 B-key slots for cellular modems. Device info: - IPQ8072A SoC - 512MiB RAM - 256MiB NAND flash - 8MiB SPI NOR - 3x 1GigE ports - 1x 2.5GigE port - 2.4GHz/5GHz AX WLAN - 1x USB 3.0 port - 1x M.2 B-key socket with PCIe 3.0 - 1x M.2 B-key socket with PCIe 2.0 and USB 3.0 - 4x SIM card slots - Bluetooth LE 5.0 (QCA4024) Prerequisites 1) TFTP server 2) 3.3V USB to TTL cable for UART console 2.54mm pitch 4-pin header for UART is readily provided on board, no modifications are necessary to access it TTL connector pinout: 2=TX, 3=RX, 4=GND Arrow marks pin 1 which is 3.3V Serial port settings: 115200 8N1 no flow control The device will most likely ship with a QSDK-based firmware. 1. Power on device and interrupt u-boot to obtain u-boot CLI 2. set serverip to IP address of the TFTP server, for example: `setenv serverip 192.168.1.10` 3. Download image from TFTP server: `tftpboot 0x44000000 openwrt-ipq807x-generic-compex_wpq873-squashfs-factory.ubi` 4. Flash ubi image to both partitions and reset: `sf probe imxtract 0x44000000 ubi nand device 0 nand erase 0x0 0x3400000 nand erase 0x3c00000 0x3400000 nand write $fileaddr 0x0 $filesize nand write $fileaddr 0x3c00000 $filesize reset` Afterwards, you can use sysupgrade to flash new OpenWRT images. Signed-off-by: Antti Nykänen <antti.nykanen@nokia.com>
* kernel: bump 5.15 to 5.15.113John Audia2023-05-26
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* x86: disable CONFIG_X86_PLATFORM_DRIVERS_HPJohn Audia2023-05-26
| | | | | | New config option defaulted to N for this bump. Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq806x: Add support for Netgear Nighthawk Pro Gaming XR450Andrzej Mialkowski2023-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Motivation: Firmware with platform ID "XR450" required for easy installation. Manufacturer pages: Product page: https://www.netgear.com/support/product/xr450 Product Data Sheet: https://www.netgear.com/images/datasheet/networking/wifirouter/XR450.pdf Current firmware: https://www.downloads.netgear.com/files/GDC/XR450/XR450-V2.3.2.134.zip Specifications: Almost identical to Netgear XR500(https://openwrt.org/toh/hwdata/netgear/netgear_xr500) Differences: Platform ID: XR450, utilized for firmware validation WLAN 2.4GHz: b/g/n Supports QAM64 (XR500 QAM256) SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB Wireless: Qualcomm Atheros QCA9984 Switch: Qualcomm Atheros AR8337 rev. 2 Ethernet: 5x 1000/100/10 USB: 2x 3.0 Install via WEB GUI (recommended): 1. Navigate within GUI to firmware update section 2. Select openwrt-ipq806x-netgear_xr450-squashfs-factory.img 3. Dismiss downgrade warning Install via TFTP recovery (same as XR500/R7800): 1. Configure host PC to use static address 192.168.1.10 https://openwrt.org/toh/netgear/r7800#prerequisites_for_tftp_flashing 2. Flash openwrt-ipq806x-netgear_xr450-squashfs-factory.img using procedure https://openwrt.org/toh/netgear/r7800#tftp_flashing_process Revert to stock firmware 1. Download current manufacturer firmware, decompress zip file to obtain img file 2. Use TFTP recovery method flash img file (currently XR450-V2.3.2.134.img) ipq806x: add support to netgear_xr450 Signed-off-by: Andrzej Mialkowski <andrzej.mialkowski@gmail.com>
* kernel: Backport MGLRU patch from 6.4Kazuki Hashimoto2023-05-25
| | | | | | | This fixes a bug where the reclaim path could occasionally have long tail latency. Signed-off-by: Kazuki Hashimoto <kazukih0205@gmail.com>
* kernel: 6.1: Synchronize MGLRU patches with upstreamKazuki Hashimoto2023-05-25
| | | | | | | | | Replace the refreshed 5.15 backports with backports for 6.1. This fixes FMODE_CAN_ODIRECT having the same value as FMODE_NOREUSE. Signed-off-by: Kazuki Hashimoto <kazukih0205@gmail.com>
* generic: filter out CONFIG_PAHOLE_HAS_SPLIT_BTFRobert Marko2023-05-24
| | | | | | | CONFIG_PAHOLE_HAS_SPLIT_BTF should be runtime detected as it depends on pahole being available on the host, so filter it out of configs. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: disable CONFIG_VMWARE_VMCI by defaultRobert Marko2023-05-24
| | | | | | | There is no reason for VMware VMCI to be disabled in targets, so disable it in the generic config. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: disable CONFIG_OCTEON_EP by defaultRobert Marko2023-05-24
| | | | | | | There is no reason for Octeon PCI endpoint driver to be disabled in targets so disable it in generic config. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: disable CONFIG_HP_WATCHDOG by defaultRobert Marko2023-05-24
| | | | | | | There is no reason for HP ProLiant HW watchdog to be disabled in individual targets, so disable it in generic config. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: disable CONFIG_ARCH_NXP by defaultRobert Marko2023-05-24
| | | | | | | There is no reason for CONFIG_ARCH_NXP to have to be disabled in individual targets, so just disable CONFIG_ARCH_NXP in generic config. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: disable CONFIG_SURFACE_PLATFORMS by defaultRobert Marko2023-05-24
| | | | | | | | There is no need for Surface platform drivers to be enabled by default, especially on OpenWrt so disable CONFIG_SURFACE_PLATFORMS in the generic config. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mediatek: add basic mt7988 device tree supportSam Shih2023-05-23
| | | | | | | This add basic device tree support for mediatek MT7988 SoC Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport cpufreq changes to support MT7988Daniel Golle2023-05-23
| | | | | | | Backport cpufreq changes from upstream so that the MediaTek MT7988 SoC can be supported. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: add driver for Richtek RT5190A regulatorDaniel Golle2023-05-23
| | | | | | | | The Richtek RT5190A is used on the MT7988 reference board. Backport and enable the driver on the filogic subtarget, so we can support cpufreq on the MT7988 reference board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add driver for built-in 2.5G Ethernet PHYDaniel Golle2023-05-23
| | | | | | | | Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC. To function the PHY also needs firmware files which have not yet been published via linux-firmware. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: update pending SoC Ethernet PHY driverDaniel Golle2023-05-23
| | | | | | | Update driver for MediaTek's built-in Gigabit Ethernet PHYs which can be found in the MT7981 and MT7988 SoCs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: mt7530: backport support for the MT7988 built-in switchDaniel Golle2023-05-23
| | | | | | | | | | | | | | | | Backport commits adding support for the MT7988 built-in switch to the mt7530 driver. This change results in the Kconfig symbol NET_DSA_MT7530 to be extended by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530) and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in switch of the MT7988 SoC). Select NET_DSA_MT7530_MDIO for all targets previously selecting NET_DSA_MT7530, with the exception of mediatek/filogic which also selects NET_DSA_MT7530_MMIO. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: add support for MediaTek NETSYS v3Daniel Golle2023-05-23
| | | | | | | In order to support Ethernet on the MT7988 SoC add support for NETSYS v3 as well as new paths and USXGMII SerDes to the mtk_eth_soc driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add mt7988 pinctrl driver supportSam Shih2023-05-23
| | | | | | | This adds provisional pinctrl driver support for the MediaTek MT7988 SoC. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add mt7988 clock drivers supportSam Shih2023-05-23
| | | | | | | This adds clock drivers for the MediaTek MT7988 SoC Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7981: setup all clocks needed for eMMCDaniel Golle2023-05-23
| | | | | | | Setup all necessary clocks to get MMC to work on MT7981, similar to how it is done also on MT7986. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7981: usb enable 3.0 by defaultChukun Pan2023-05-23
| | | | | | | There is no reason to limit USB to 2.0 mode by default, delete this limit. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: enable (ARM|ARM64)_MODULE_PLTS in generic configTony Ambardar2023-05-23
| | | | | | | | | | | | | | | | | | | This allows loading modules with large memory requirements, recently needed while testing on armvirt/32. Past forum discussions [1] and bug reports [2] also raised this and the ipq806x target already set it in response [3]. Given this increases kernel image size by only ~1KB, is generally useful on multi-platform kernels, and enabled by default on upstream arm32 Linux, add it to the generic config. The setting has similar utility on arm64, is a requirement for KASLR, and already enabled on most OpenWrt aarch64 targets, so pull this into the top-level generic config. [1]: https://forum.openwrt.org/t/vmap-allocation-for-size-442368-failed-use-vmalloc-size-to-increase-size/34545/7 [2]: https://github.com/openwrt/openwrt/issues/8282 [3]: f81e148eb6 ("ipq806x: update 4.19 kernel config"). Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: add disabled symbol CONFIG_CPU_LITTLE_ENDIAN on 6.1Aleksander Jan Bajkowski2023-05-23
| | | | | | | The identical change was previously added to the 5.15 kernel in the commit 9226f1e41948 ("kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config"). Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: sort generic configurationAleksander Jan Bajkowski2023-05-23
| | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new $ mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 $ ./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new $ mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mediatek: mt7623: build SD card without all filesystemsDaniel Golle2023-05-22
| | | | | | | | Allow building SD card images without having both initramfs and squashfs present on the card, just like it has already been done for the mt7622 and filogic subtargets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq806x: enable testing kernel version with 6.1 versionChristian Marangi2023-05-22
| | | | | | Enable testing kernel version with 6.1 kernel version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: refresh config and add missing symbolsChristian Marangi2023-05-22
| | | | | | | | | Refresh config for kernel 6.1 and add missing symbols Then sorted using: $ ./scripts/kconfig.pl '+' target/linux/ipq806x/config-6.1 /dev/null > target/linux/ipq806x/config-6.1-new $ mv target/linux/ipq806x/config-6.1-new target/linux/ipq806x/config-6.1 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: refresh dtsChristian Marangi2023-05-22
| | | | | | | | Refresh dts for kernel 6.1 support. Changes: - nbg6817 drop amba node and reference directly sdcc1. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: refresh kernel patchesChristian Marangi2023-05-22
| | | | | | Refresh ipq806x kernel patches with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: manually refresh kernel patchesChristian Marangi2023-05-22
| | | | | | Refresh kernel patches for version 6.1. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: replace ZRELADDR HACK patch with new versionChristian Marangi2023-05-22
| | | | | | | | With 6.1 lots have changed and the platform for Makefile.boot got dropped. Replace the patch with a new version that is alligned to the new implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: drop upstream patchChristian Marangi2023-05-22
| | | | | | Drop patch that got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: copy patches, files and config from 5.15Christian Marangi2023-05-22
| | | | | | Copy patches, files and config from 5.15 kernel version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: modules: wwan: adapt for kernel 6.1Robert Marko2023-05-22
| | | | | | | | | Update the WWAN kmods for compilation under kernel 6.1: * Depend on kernel not being 5.10 rather than only 5.15 * Enable CONFIG_WWAN_DEBUGFS as its now optional from 5.17 * Add missing symbols for new WWAN drivers to generic config Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: kernel: add missing symbolPawel Dembicki2023-05-22
| | | | | | | | Add missing symbol while adding layerscape support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [ add commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add missing symbolsRobert Marko2023-05-22
| | | | | | These symbols got exposed once building for ipq807x. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: refresh config and add missing symbolsChristian Marangi2023-05-22
| | | | | | | | | Refresh generic config for 6.1 and add missing symbols. Then sorted using: $ ./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new $ mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: use eth_random_addr instead of random_ether_addrChristian Marangi2023-05-22
| | | | | | | | | | random_ether_addr is just a reference to eth_random_addr, that was later dropped in more recent kernel version. Drop random_ether_addr and use eth_random_addr directly to fix compilation error in 6.1 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernek: use struct_group to wipe ar8216 volatile priv dataChristian Marangi2023-05-22
| | | | | | | | | Instead of reference vlan and do strange subtraction, use the handy struct_group() to create a virtual struct of the same size of the members. This permits to have a more secure memset and fix compilation warning in 6.1 where additional checks are done. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: refresh swconfig_leds to handle new trigger lockingChristian Marangi2023-05-22
| | | | | | | Refresh swconfig_leds source to handle new trigger locking that is now a spinlock. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: refresh IFF_NO_IP_ALIGN ifdef for kernel >= 6.1Christian Marangi2023-05-22
| | | | | | | Kernel 6.1 expanded the priv_flags to long bitmap so update and restore it to priv_flags. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: refresh pending patchesChristian Marangi2023-05-22
| | | | | | Refresh pending patches with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.