aboutsummaryrefslogtreecommitdiff
path: root/target
Commit message (Collapse)AuthorAge
...
* ath79: wpj563: enable 2nd USB controllerKoen Vandeputte2023-10-13
| | | | | | | | | | | | The compex WPJ563 actually has both usb controllers wired: usb0 --> pci-e slot usb1 --> pin header As the board exposes it for generic use, enable this controller too. fixes: #13650 Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* bcm53xx: build a single device per profileRani Hod2023-10-13
| | | | | | | | | | | | | | So far every build of a single bcm53xx Target Profile (it means: when NOT using CONFIG_TARGET_MULTI_PROFILE) resulted in all target devices images being built. Now it only builds the one matching selected profile. Fixes: #13572 Suggested-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Rani Hod <rani.hod@gmail.com> [rmilecki: update commit subject + body & move PROFILES line] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.15 to 5.15.135John Audia2023-10-12
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.135 All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* lantiq: Fix an sleeping function called from invalid contextHauke Mehrtens2023-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ifx_pcie_bus_enum_hack() function is called in ifx_pcie_read_config() while holding the ifx_pcie_lock spinlock. The ifx_pcie_bus_enum_hack() function calls pci_get_slot() which could sleep. Add a new function for pci_get_slot() which does not use a semaphore, the mutex should be sufficient. This fixes the sleep in atomic context which could cause a hang of the system. This fixes the following warning seen with CONFIG_KERNEL_DEBUG_ATOMIC_SLEEP=y. [ 12.264300] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 12.272226] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1487 [ 12.280684] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/u4:0 [ 12.288781] CPU: 0 PID: 9 Comm: kworker/u4:0 Not tainted 5.15.134 #0 [ 12.295135] Workqueue: events_unbound deferred_probe_work_func [ 12.300964] Stack : 80e70000 8008ac80 00000000 00000004 807c776c 8145b9ec 81424c00 800520ec [ 12.309316] 808a0000 8145ba2b 8145b844 8145b838 80414178 00000001 8145b9f8 81439ea0 [ 12.317674] 00000000 00000000 807c776c 8145b838 ffffefff 00000000 00000000 ffffffea [ 12.326030] 00000081 8145b844 00000081 808a6f50 807c776c 00000000 00000000 80910000 [ 12.334391] 00111bef 00000000 00000001 00000000 00000018 00000030 00000000 80e40000 [ 12.342741] ... [ 12.345177] Call Trace: [ 12.347613] [<8000c1d0>] show_stack+0x28/0xf0 [ 12.351974] [<8038ba1c>] dump_stack_lvl+0x60/0x80 [ 12.356667] [<8005eefc>] ___might_sleep+0x124/0x138 [ 12.361547] [<806daf30>] down_read+0x24/0x88 [ 12.365807] [<803cdd20>] pci_get_slot+0x2c/0xc0 [ 12.370333] [<806d56ac>] ifx_pcie_read_config+0x164/0x330 [ 12.375735] [<803be610>] pci_bus_read_config_dword+0x6c/0xd0 [ 12.381399] [<803c20cc>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1a8 [ 12.387915] [<803c27ec>] pci_scan_single_device+0x88/0x154 [ 12.393404] [<803c2928>] pci_scan_slot+0x70/0x134 [ 12.398099] [<803c3bf0>] pci_scan_child_bus_extend+0x5c/0x320 [ 12.403849] [<803c4178>] pci_scan_root_bus_bridge+0xd0/0xec [ 12.409414] [<806d45a8>] pcibios_scanbus+0xe4/0x21c [ 12.414293] [<806d4908>] register_pci_controller+0xb8/0x11c [ 12.419858] [<806d5f9c>] ifx_pcie_bios_probe+0x724/0x940 [ 12.425174] [<80417574>] platform_probe+0x38/0x90 [ 12.429868] [<80414d68>] really_probe.part.0+0xac/0x354 [ 12.435103] [<80415298>] driver_probe_device+0x4c/0x154 [ 12.440313] [<80415904>] __device_attach_driver+0xd0/0x15c [ 12.445802] [<804129d8>] bus_for_each_drv+0x70/0xb0 [ 12.450676] [<80415610>] __device_attach+0xdc/0x194 [ 12.455545] [<80413ca8>] bus_probe_device+0x9c/0xb8 [ 12.460419] [<8041420c>] deferred_probe_work_func+0x94/0xd4 [ 12.465995] [<8004fcb4>] process_one_work+0x27c/0x4c8 [ 12.471044] [<80050710>] worker_thread+0x34c/0x5f8 [ 12.475825] [<800587a8>] kthread+0x168/0x18c [ 12.480090] [<80006ef8>] ret_from_kernel_thread+0x14/0x1c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: add support for HPE 1920-8g-poe+ (65W)Kevin Jilissen2023-10-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware information: --------------------- - RTL8380 SoC - 8 Gigabit RJ45 PoE ports (built-in RTL8218B) - 2 SFP ports (built-in SerDes) - RJ45 RS232 port on front panel - 32 MiB NOR Flash - 128 MiB DDR3 DRAM - PT7A7514 watchdog - PoE chip - Fanless Known issues: --------------------- - PoE LEDs are uncontrolled. (Manual taken from f2f09bc) Booting initramfs image: ------------------------ - Prepare a FTP or TFTP server serving the OpenWrt initramfs image and connect the server to a switch port. - Connect to the console port of the device and enter the extended boot menu by typing Ctrl+B when prompted. - Choose the menu option "<3> Enter Ethernet SubMenu". - Set network parameters via the option "<5> Modify Ethernet Parameter". Enter the FTP/TFTP filename as "Load File Name" ("Target File Name" can be left blank, it is not required for booting from RAM). Note that the configuration is saved on flash, so it only needs to be done once. - Select "<1> Download Application Program To SDRAM And Run". Initial installation: --------------------- - Boot an initramfs image as described above, then use sysupgrade to install OpenWrt permanently. After initial installation, the bootloader needs to be configured to load the correct image file - Enter the extended boot menu again and choose "<4> File Control", then select "<2> Set Application File type". - Enter the number of the file "openwrt-kernel.bin" (should be 1), and use the option "<1> +Main" to select it as boot image. - Choose "<0> Exit To Main Menu" and then "<1> Boot System". NOTE: The bootloader on these devices can only boot from the VFS filesystem which normally spans most of the flash. With OpenWrt, only the first part of the firmware partition contains a valid filesystem, the rest is used for rootfs. As the bootloader does not know about this, you must not do any file operations in the bootloader, as this may corrupt the OpenWrt installation (selecting the boot image is an exception, as it only stores a flag in the bootloader data, but doesn't write to the filesystem). Example PoE config file (/etc/config/poe): --------------------- config global option budget '65' config port option enable '1' option id '1' option name 'lan8' option poe_plus '1' option priority '2' config port option enable '1' option id '2' option name 'lan7' option poe_plus '1' option priority '2' config port option enable '1' option id '3' option name 'lan6' option poe_plus '1' option priority '2' config port option enable '1' option id '4' option name 'lan5' option poe_plus '1' option priority '2' config port option enable '1' option id '5' option name 'lan4' option poe_plus '1' option priority '2' config port option enable '1' option id '6' option name 'lan3' option poe_plus '1' option priority '2' config port option enable '1' option id '7' option name 'lan2' option poe_plus '1' option priority '2' config port option enable '1' option id '8' option name 'lan1' option poe_plus '1' option priority '2' Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
* realtek: rename hpe,1920-8g-poe to match hardwareKevin Jilissen2023-10-09
| | | | | | | | | | | | | There are two hardware models of the HPE 1920-8g-poe switch. The version currently in the repository is the model with a PoE budget of 180W. In preparation of the addition of the 65W model, the existing model is renamed to clarify the hardware version it targets. As suggested by Pawel, the 'SUPPORTED_DEVICES' includes the old target name to enable an upgrade path of builds with the old name. Suggested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
* ath79: add WWAN serial driver for GL.iNET GL-XE300David Bauer2023-10-09
| | | | | | | | | | | The driver for the cellular modems serial interface was missing from the default device packages. The driver is required to interact with the modem using AT commands. Other devices with a 4G modem also ship with this package, thus let's add it to the default packages for the board. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq806x: fix broken onhub dtsiChristian Marangi2023-10-09
| | | | | | | | | | Fix broken onhub dtsi. The gmac node have a redundant phy-handle that doesn't point to the swconfig phy node as they got dropped in the DSA conversion. Drop these extra binding to restore correct compilation of this subtarget. Fixes: 337e36e0ef98 ("ipq806x: convert each device to DSA implementation") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: convert MT7915 EEPROM to NVMEM formatShiji Yang2023-10-09
| | | | | | | This patch converts MT7915 WiFi calibration data to NVMEM format. The EEPROM size is 0xe00. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7613 and MT7615 EEPROM to NVMEM format for MT7621Shiji Yang2023-10-09
| | | | | | | This patch converts MT7613 and MT7615 WiFi calibration data to NVMEM format. The EEPROM size is 0x4da8. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7610 and MT7612 EEPROM to NVMEM format for MT7621Shiji Yang2023-10-09
| | | | | | | This patch converts MT7610 and MT7612 WiFi calibration data to NVMEM format. The EEPROM size is 0x200. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7603 EEPROM to NVMEM formatShiji Yang2023-10-09
| | | | | | | This patch converts MT7603 WiFi calibration data to NVMEM format. The EEPROM size is 0x400. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: correct NVMEM MAC address node name and label for Bolt ArionShiji Yang2023-10-09
| | | | | | | The node name&label should match the address in the 'reg' property, so it's better to change the incorrect offset to the 0x28. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix EEPROM size for I-O DATA WN-DEAX1800GRShiji Yang2023-10-09
| | | | | | | | I-O DATA WN-DEAX1800GR uses MT7915 PCIe NIC. The correct EEPROM size is 0xe00. Fixes: ac68fbf526d ("ramips: add support for I-O DATA WN-DEAX1800GR") Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: bump 6.1 to 6.1.56John Audia2023-10-08
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.56 Removed upstreamed: bcm53xx/patches-6.1/032-v6.6-0008-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.56&id=226590fbd96717fce218878044df3568c825ba8e Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.134John Audia2023-10-07
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.134 Removed upstreamed: generic/backport-5.15/894-Fix-up-backport-for-13619703038.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.134&id=d7acb7031758141225844bea073860b48fd92092 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport qca8k fixes for big endian and MDIOChristian Marangi2023-10-06
| | | | | | | | Backport qca8k fixes for big endian system (to make them working again) and a patch fixing MDIO conflicts if other PHY are connected and mgmt eth is used to control the switch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add patch enabling assisted learning for qca8kChristian Marangi2023-10-06
| | | | | | | Add patch enabling assisted learning for qca8k to fix roaming issue between BSS and BSS on the same L2 broadcast domain. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: fix compilation warning for CONFIG_PROC_STRIPPEDChristian Marangi2023-10-06
| | | | | | | | | | | | | | Fix compilation warning for CONFIG_PROC_STRIPPED for kernel 6.1. Fix compilation warning: make[4]: Leaving directory '/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-ath79_tiny/linux-6.1.55' net/ipv4/inet_timewait_sock.c: In function '__inet_twsk_schedule': net/ipv4/inet_timewait_sock.c:272:22: error: unused variable 'kill' [-Werror=unused-variable] 272 | bool kill = timeo <= 4*HZ; | ^~~~ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add missing config SPI_BCM63XX_HSSPIChristian Marangi2023-10-06
| | | | | | | Add missing config SPI_BCM63XX_HSSPI for kernel 6.1 triggered on compilation of bcm4908. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ath79: mikrotik: fix build error with kernel 6.1Koen Vandeputte2023-10-06
| | | | | | | | | | | | | | | | drivers/mfd/rb4xx-cpld.c:167:19: error: initialization of 'void (*)(struct spi_device *)' from incompatible pointer type 'int (*)(struct spi_device *)' [-Werror=incompatible-pointer-types] 167 | .remove = rb4xx_cpld_remove, | ^~~~~~~~~~~~~~~~~ drivers/mfd/rb4xx-cpld.c:167:19: note: (near initialization for 'rb4xx_cpld_driver.remove') cc1: some warnings being treated as errors make[8]: *** [scripts/Makefile.build:250: drivers/mfd/rb4xx-cpld.o] Error 1 make[7]: *** [scripts/Makefile.build:500: drivers/mfd] Error 2 make[6]: *** [scripts/Makefile.build:500: drivers] Error 2 make[5]: *** [Makefile:2012: .] Error 2 As the allocated function does nothing, simply delete it. Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* generic: rtl8366_smi: rename and drop conflicting vlan GPL symbolsChristian Marangi2023-10-06
| | | | | | | | | | | | Symbol rtl8366_enable_vlan and rtl8366_reset_vlan are also present in the DSA driver upstream and conflicts as they are EXPORTED. Rename them to rtl8366_smi_enable_vlan and rtl8366_smi_reset_vlan to fix the conflict. While at it also make them static and drop the EXPORT_SYMBOL_GPL as they are not actually used by any other driver and exporting them is useless. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* armsr: armv8: Enable KASLR in kernel 6.1Javier Tia2023-10-05
| | | | | | | In userspace, ASLR is enabled, but it's missing to enable KASLR on the kernel side to improve security as part of SystemReady recommendations. Signed-off-by: Javier Tia <javier.tia@linaro.org>
* mediatek: fix wrong variable name in patch for Linux 6.1Daniel Golle2023-10-05
| | | | | | | | | | The name of the variable holding the pointer to the private struct has changed between Linux 5.15 and Linux 6.1 and adding the identical patch fixing PCIe #PERST de-assert broke the build on Linux 6.1. Also change the name in the patch to fix the build. Fixes: 6a2e17d5c1 ("mediatek: fix PCIe #PERST being de-asserted too early") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq806x: fix wrong QCA8K LED definition for NEC Aterm WG2600HP3Christian Marangi2023-10-05
| | | | | | | | | | | Fix copy-paste error in migrating NEC Aterm WG2600HP3 to new LED implementation for the QCA8K switch. Correct define the missing additional LED pin used for each port and fix wrong color for LED 2 for each port. Also add the required function-enumerator as all 3 LED have the same color and function. Fixes: c707cff6c94b ("ipq806x: add LEDs definition for non-standard qca8k LEDs") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add support for Extreme Networks AP3935Glen Lee2023-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extreme Networks AP3935i/e - https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/ SoC: IPQ8068 QYY AT46279K45060I RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW FLASH: NOR - S25FL256S1 - 32MB NAND - Macronix MX30UF4G28AB - 512MB LAN: Atheros AR8035-A J5150WL 1515 CN - RGMII LAN2: Atheros AR8033-AL1A SKCSR.AJ1 1444 China - SGMII WLAN2: QCA9990 OVV FNPV209 K451406 WLAN5: QCA9990 OVV FNPV209 K451406 SERIAL: RS232 Port (115200 8n1) Cisco console cable and 4pin Serial Header | 3.3 | GND | RX | TX MAC address for LAN1/LAN2/WLAN 2G/WLAN 5G in uboot env * Installation via either RJ45 console or on-board 4 PIN header Install Method -------------- 1) Setup TFTP server, and place openwrt-ipq806x-generic-extreme_ap3935-initramfs-uImage image in /srv/tftp or similar 2) Connect to console on router and connect ethernet port "LAN1" to your LAN 3) Interupt the boot with any character 4) Login with admin/new2day for default password (use reset/FactoryDefault if password needs to be reset) 5) Set serverip to TFTP IP: set serverip 192.168.1.2 6) Set ipaddr to another IP: set ipaddr 192.168.1.101 7) Make uboot ping something to activate eth0 on boot: set bootcmd 'ping 192.168.1.1; run boot_flash' saveenv 8) TFTP image to RAM: tftpboot 0x42000000 openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage 9) Boot image: bootm 0x42000000 In OpenWRT, "LAN1" is LAN, "LAN2" is WAN 10) SFTP openwrt-ipq806x-generic-extreme_ap3935-squashfs-nand-sysupgrade.bin image to /tmp 11) sysupgrade /tmp/openwrt-*-nand-sysupgrade.bin Signed-off-by: Glen Lee <g2lee@yahoo.com>
* kernel: bump 5.15 to 5.15.133John Audia2023-10-04
| | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.133 Removed upstreamed: bcm47xx/patches-5.15/101-v5.18-mtd-rawnand-brcmnand-Allow-SoC-to-provide-I-O-operations.patch[1] Cherry picked build fix.[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.133&id=56cf9f446b331414a15ef0e8dedf23583ec2c427 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/tree/queue-5.15/fix-up-backport-of-136191703038-interconnect-teach-l.patch Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* gemini: Drop kernel v5.15 and default to v6.1Linus Walleij2023-10-04
| | | | | | | | | | | | | | There is no point in keeping the v5.15 kernel around for Gemini, we are maintaining the platform with a strong upstream focus and newer is always better. Now that OpenWrt can support pure v6.1 kernels, switch up to v6.1 and drop v5.15 so we don't need to migrate configs and patches for no reason. The USB FOTG2 module handling can be simplified as a result. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* rtl83xx: fix STP by trapping BPDUsRudolf Vesely2023-10-04
| | | | | | | | | | | Fix Spanning Tree Protocol (STP) by changing COPY2CPU which currently makes switch to ignore Bridge Protocol Data Units (BPDUs). Tested on Zyxel GS1900-8, 24 and 48. Signed-off-by: Rudolf Vesely <i@rudolfvesely.com> [ improve commit description and add new line in different sections ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* realtek: 5.15: rtl93xx: support 2500baseT and 5000baseT on USXGMII linksTobias Schramm2023-10-03
| | | | | | | | | | | | | | | | | The USXGMII implementation of Realtek switches can not only support 10GbE but also 2.5Gb and 5Gb on top of the usual data rates. Mark those as supported to allow them to be negotiated. This change has been tested on a ZyXEL XGS1250-12 with the following link partners: - NWA50AX Pro (2.5Gb) - RTL8152 USB NIC (2.5Gb) - AQC111 USB NIC (2.5Gb & 5Gb) Gbit and 10GbE has also been tested to still work fine with a variety of devices. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* rtl93xx: fix condition intended to only select internal serdes portsPeter Körner2023-10-03
| | | | | | | | | | | | | This condition was introduced in commit 51c8f7661244 ("realtek: Improve MAC config handling for all SoCs") to correctly report the speed of the internal serdes ports as 10G, but instead makes all ports read 10G because the or-operator should have been an and-operator. Fixes: #9953 Fixes: 51c8f7661244 ("realtek: Improve MAC config handling for all SoCs") Signed-off-by: Peter Körner <git@mazdermind.de> [ wrap comment to 72 column and improve commit ref ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: fix PCIe #PERST being de-asserted too earlyDaniel Golle2023-10-03
| | | | | | | | | The driver for MediaTek gen3 PCIe hosts de-asserts all reset signals at the same time using a single register write operation. Delay the de-assertion of the #PERST signal by 100ms as some PCIe devices fail to come up otherwise. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: use upstreamed SDI disable supportRobert Marko2023-10-02
| | | | | | | | | | | | | | | Google WiFi board has what seems as debug version of TZ/QSEE and it is always enabling SDI (Secure Debug Image) and in order to do a regular reboot it must be disabled, as otherwise you are stuck in a debug state where you are supposed to extract debug logs via QCA tooling which is not helpfull at all for regular users. So, instead of using our downstream version to disable SDI lets use the version that was merged upstream and relies on a boolean property in the SCM node instead of checking the compatible. Signed-off-by: Robert Marko <robimarko@gmail.com> Tested-by: Brian Norris <computersforpeace@gmail.com>
* mediatek: fix eeprom loading (Mercusys MR90X v1)Mikhail Zhilkin2023-10-02
| | | | | | | | | | | | | Commit mt76: drop default eeprom file for mt7986-firmware (e3aa645b267ca4f08773b5366583e9b0020fc3e9) breaks eeprom loading for Mercusys MR90X v1. As a result WiFi is not working at all. This commit adds Mercusus MR90x to the caldata script (it works after the commit mentioned above). And we can safely drop "81_fix_eeprom" script as it's no longer required. Fixes: e3aa645b267ca4f08773b5366583e9b0020fc3e9 Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ipq806x: disable unused SWCONFIG config flagsChristian Marangi2023-09-30
| | | | | | | Disable unused SWCONFIG config flags now that we switched to DSA and are not needed anymore. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: refresh qca8k patchesChristian Marangi2023-09-30
| | | | | | Refresh qca8k patches to sync with the generic backports changes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add LEDs definition for non-standard qca8k LEDsChristian Marangi2023-09-30
| | | | | | | | | | Add LEDs definition for devices that use a non-standard qca8k LEDs configuration. This is to restore original setup of the LED and be on par with swconfig old configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: enable and setup multi-CPU port for qca8k switchChristian Marangi2023-09-30
| | | | | | | | | | | | | | | | | Enable and setup multi-cpu for qca8k switch for ipq806x based devices. Rework each DTS to enable the secondary CPU port on QCA8K switch and apply the required values originally set by the OEM in the old swconfig node. In original firmware the first CPU port was always assigned to the WAN port and the secondary CPU port was assigned to the rest of the LAN port. Follow this original implementation using an init.d script. To setup the CPU port ip tools is required. Add additional default package ip-tiny to correctly setup the CPU port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch for multi CPU port support on QCA8KChristian Marangi2023-09-30
| | | | | | | | Backport pending patch for multi CPU port support on QCA8K. 6.1 already supports all the requiredt code to change a DSA master port so only this patch fixing the driver is required. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport various qca8k fixes patchChristian Marangi2023-09-30
| | | | | | | Backport various QCA8K fixes patch merged upstream. Refresh any changed patches due to backports. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: move ASRock G10 fix mac preinit script to generic board.d scriptChristian Marangi2023-09-30
| | | | | | | | Drop and move ASRock G10 preinit script to fix mac address to generic board.d script and rework for consistency with other devices following a similar implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: convert each device to DSA implementationChristian Marangi2023-09-30
| | | | | | | | | | | Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: add patch for GPON-ONU-34-20BI quirkChristian Marangi2023-09-29
| | | | | | Backport patch merged upstream adding quirk for SFP GPON-ONU-34-20BI. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* filogic: add support for GL.iNet GL-MT6000Jianhui Zhao2023-09-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: * SoC: MediaTek MT7986A 4x A53 * Flash: 8GB EMMC * RAM: 1GB DDR4 * Ethernet: * 2x2.5G RJ45 port (RTL8221B) * 4x1G RJ45 ports (MT7531AE) * WLAN: * 2.4GHz: MT7976GN 4T4R * 5GHz: MT7976AN 4T4R * Button: Reset * LED: 1 x dual color LED * USB: 1 x USB 3.0 * Power: DC 12V 4A * UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC) * JTAG: 9 PIN If you want to use u-boot from OpenWrt, you can upgrade it safely. * bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin * fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip `openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* generic: net: phy: realtek: add interrupt support for RTL8221BJianhui Zhao2023-09-29
| | | | | | This commit introduces interrupt support for RTL8221B. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* sifiveu: refresh 6.1 configZoltan HERPAI2023-09-28
| | | | | | Add new config symbols as required. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: remove upstreamed patches, refresh remaining onesZoltan HERPAI2023-09-28
| | | | | | | | | | | | Upstreamed: 0002-riscv-sifive-unmatched-update-regulators-values.patch 0003-riscv-sifive-unmatched-define-PWM-LEDs.patch 0006-riscv-sbi-srst-support.patch Compile-tested: HiFive Unleashed / Unmatched Runtime-tested: HiFive Unleashed / Unmatched Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: add testing kernel 6.1Zoltan HERPAI2023-09-28
| | | | | | | Compile-tested: HiFive Unleashed / Unmatched Runtime-tested: HiFive Unleashed / Unmatched Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Powered by cgit, Themed by Ted Yin.