aboutsummaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAge
...
* ramips: mt7621: use variable for relocate-kernel argumentSungbo Eo2024-03-10
| | | | | | | | The "0x80001000" address logically comes from "loadaddr-y" variable for mt7621 subtarget. Let's replace the hardcoded value with the predefined variable. This change is purely cosmetic. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: rename mtd partition of ipTIME NAND devicesSungbo Eo2024-03-10
| | | | | | | | | | | | Contrary to common ipTIME NOR devices, the "Config" partition of T5004 and AX2004M contain normal U-Boot environment variables. Renaming the partition into "u-boot-env" serves for better description, and it also conforms to common naming practice in OpenWrt. This patch might also be extended to A3004T, but its u-boot-env partition layout has not been confirmed yet. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add NMBM support for ipTIME AX2004MSungbo Eo2024-03-10
| | | | | | | | | | | | | | | | AX2004M uses NMBM on its NAND flash, but it was not enabled in DTS as the device support [1] had been added before NMBM feature in mtk_bmt driver [2]. Let's enable it now. With this change, there is a low possibility of boot failure after sysupgrade from older versions. As AX2004M already has gone through two stable releases in the meantime, it would be safe to warn users by bumping DEVICE_COMPAT_VERSION. [1] 37753f34ac68 ("ramips: add support for ipTIME AX2004M") [2] 06382d1af7b2 ("kernel: add support for mediatek NMBM flash mapping support") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: add support for D-Link COVR-C1200 A1Sebastian Schaper2024-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The COVR-C1200 devices are sold as "Whole Home Mesh Wi-Fi" sets in packs of two (COVR-C1202) and three (COVR-C1203). Specifications: * QCA9563, 16 MiB flash, 128 MiB RAM, 2x3:2 802.11n * QCA9886 2x2:2 801.11ac Wave 2 * AR8337, 2 Gigabit ports (1: WAN; 2: LAN) * USB Type-C power connector (5V, 3A) Installation COVR Point A: * In factory reset state: OEM Web UI is at 192.168.0.50 no DHCP, skip wizard by directly accessing: http://192.168.0.50/UpdateFirmware_Simple.html * After completing setup wizard: Web UI is at 192.168.0.1 DHCP enabled, login with empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Installation COVR Points B: * OEM Web UI is at 192.168.0.50, no DHCP, empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Recovery: * Keep reset button pressed during power on * Recovery Web UI is at 192.168.0.50, no DHCP * Flash factory.bin used to work best with Chromium-based browsers or curl: curl -F firmware=@factory.bin \ http://192.168.0.50/upgrade.cgi since this fails to work on modern Linux systems, there is also a script dlink_recovery_upload.py Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: split dtsi for D-Link COVR-P2500Sebastian Schaper2024-03-09
| | | | | | in preparation of adding COVR-C1200 Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* Revert "ipq-wifi: fix upstream board-2.bin ZTE M289F snafu"Christian Lamparter2024-03-09
| | | | | | | This reverts commit 75505c5ec724b9b961dcb411bac1d4b9aede3e1d. The issue has been fixed upstream. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mediatek: linksys-e8450: improve compat warningDaniel Golle2024-03-09
| | | | | | | Include a statement about having to run the installer in the sysupgrade compat warning for the Linksys E8450 (UBI). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: wait for fitblk rootfsDaniel Golle2024-03-09
| | | | | | | | Probing of the fitblk driver in some situations happens after the kernel attempts to mount rootfs, which then fails. Always use 'rootwait' when using fitblk for rootfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: cleanup and enable uart1 on ELECOM WAB-I1750-PSINAGAKI Hiroshi2024-03-08
| | | | | | | | | | | | Cleanup uart1-related node on ELECOM WAB-I1750-PS and enable it for "SERIAL" port on the case. "SERIAL" port can be used for OpenWrt console by adding the following line to /etc/inittab and rebooting: ttyATH1::askfirst:/usr/libexec/login.sh Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: drop unnecessary &uart node from dtsi of QCA955x devicesINAGAKI Hiroshi2024-03-08
| | | | | | &uart (uart0) is already enabled in qca955x.dtsi by default. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: add aliases to qca955x.dtsi for uart0/1INAGAKI Hiroshi2024-03-08
| | | | | | | | | | | | | | Add aliases with "serialN = &uartN;" of uart0/1 on QCA955x SoCs to qca955x.dtsi, to enable uart1 on Linux Kernel. without this: [ 0.342915] ar933x-uart 18500000.uart: unable to get alias id, err=-19 Additionally, remove "serial0 = &uart;" alias from QCA955x device dts/dtsi files. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: add HighSpeed UART (uart1) support for QCA955xINAGAKI Hiroshi2024-03-08
| | | | | | | Add HighSpeed UART support to QCA955x series SoCs as a secondary UART (uart1). This UART is compatible with qca,ar9330-uart. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: rename label of primary UART on QCA955x to "uart0"INAGAKI Hiroshi2024-03-08
| | | | | | | | Rename the DT label of the primary UART on Qualcomm Atheros QCA955x series SoCs to "uart0" from "uart" for the preparation to add HighSpeed UART (uart1) support. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mpc85xx: p1020: convert Aerohive AP330/AP350 to simpleImageChristian Lamparter2024-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | with 6.1, the kernel no longer fitted into the 16 MiB and kicking down the can and increasing KERNEL_SIZE to 20 MiB didn't help as the device failed to boot. Using 'kernel-bin | gzip | uimage gzip' didn't work since the uboot does not have enough heap to decompress these big kernels. And finally playing around with uboot was more a hassle than converting this device to take the simpleImage-boot-route in the future. Note: The device now takes even longer on the first boot-up after the flash due to JFFS2 initializing all the remaining flash. Be prepared to wait up to 10 minutes before the green status LED stops blinking and will shine a solid green! (On the plus site: the device now has ~10 MiB of additional space for rootfs+rootfs_data). Note2: This patch includes a kernel patch refresh. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mpc85xx: add 6.1 testing kernelPawel Dembicki2024-03-08
| | | | | | Configure 6.1 testing kernel for mpc85xx target. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: p1010: change wrapper address of simple image devicesPawel Dembicki2024-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel and initramfs size grows. Now uncompressed initramfs image and regular kernel image overlaps configured area: Initramfs: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) Regular image: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) Let's change wrapper address to safe value. Tested on: TL-WDR4900, BR200-WP Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: kernel: refresh 6.1 configPawel Dembicki2024-03-08
| | | | | | Kernel config needs to be refreshed after copy from 5.15. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: refresh 6.1 patchesPawel Dembicki2024-03-08
| | | | | | | | | Most changes done by "make target/linux/refresh" Manually refreshed: 102-powerpc-add-cmdline-override.patch Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: copy patches 5.15 to 6.1Pawel Dembicki2024-03-08
| | | | | | Just copy of config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: copy config 5.15 to 6.1Pawel Dembicki2024-03-08
| | | | | | Simple copy of patches. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: Get rid of 'of_flat_dt_is_compatible'Pawel Dembicki2024-03-08
| | | | | | | | | | | This patch replaces 'of_flat_dt_is_compatible' with 'of_machine_is_compatible'. The TL-WDR4900 platform file won't compile in the 6.1 kernel. The platform files for the rest of the routers have been reworked or based on newer solutions. Let's make the TL-WDR4900 consistent with them. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* lantiq: Fix build after kernel 5.15.150Hauke Mehrtens2024-03-08
| | | | | | | | | | | | | | | | | | | This fixes the following compile problem: ```` CC arch/mips/kernel/vpe-mt.o arch/mips/kernel/vpe-mt.c: In function 'vpe_run': arch/mips/kernel/vpe-mt.c:32:23: error: unused variable 'physical_memsize' [-Werror=unused-variable] 32 | unsigned long physical_memsize = 0L; | ^~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[6]: *** [scripts/Makefile.build:289: arch/mips/kernel/vpe-mt.o] Error 1 ```` physical_memsize was removed from upstream kernel, see: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=5b4f6c5ff65c8551018ccea40c569afd759734c0 Fixes: 387fde0da0e8 ("kernel: bump 5.15 to 5.15.150") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dtsFurong Xu2024-03-08
| | | | | | | | Clean duplication of #include <dt-bindings/leds/common.h>. Thanks musashino205 Fixes: 1493e8f8cbe2 ("mediatek: convert LED color/function format for Xiaomi Redmi AX6000") Signed-off-by: Furong Xu <xfr@outlook.com>
* mediatek: filogic: switch to fitblk for Xiaomi Redmi AX6000Furong Xu2024-03-08
| | | | | | | | Use the new fitblk driver. Run-tested: filogic/mt7986a-xiaomi-redmi-router-ax6000-ubootmod Signed-off-by: Furong Xu <xfr@outlook.com>
* mediatek: convert LED color/function format for Xiaomi Redmi AX6000Furong Xu2024-03-08
| | | | | | | | | | | | Commit 2d63d42f5e2f ("mediatek: convert to new LED color/function format where possible") leaves Xiaomi Redmi AX6000 un-converted, the two LEDs become dead. Now, LEDs are alive again. Fixes: 2d63d42f5e2f ("mediatek: convert to new LED color/function format where possible") Signed-off-by: Furong Xu <xfr@outlook.com>
* kernel: 6.1: add missing config symbol for tracingTony Ambardar2024-03-07
| | | | | | | Add missing option CONFIG_FPROBE to generic config, found building x86_64 arch with tracing enabled. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: Remove unused schedulersHauke Mehrtens2024-03-07
| | | | | | These schedulers were removed in kernel 5.15.150 and 6.1.180. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.150Hauke Mehrtens2024-03-07
| | | | | | | | | | | | | | | | | | | | | | | Removed because it is upstream: bcm53xx/patches-5.15/030-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cb1003c07e746e4e82bdd3959c9ea37018ed41a3 Removed because it is upstream: bcm53xx/patches-5.15/037-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c65a23e98e38dc991f495d6bdb3cfa6163a88a0c Removed because it is upstream: bcm53xx/patches-5.15/037-v6.6-0005-ARM-dts-BCM53573-Drop-nonexistent-usb-cells.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=71475bcee001cae3844644c2787eef93b26489d1 Adapted hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch to match the changes from the upstream flow offload patch: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7c71b831220edeab7ce603d818dc1708d9ea4137 Manually Adapted the following patch: bcm53xx/patches-5.15/035-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.149Hauke Mehrtens2024-03-07
| | | | | | | | | | | Removed because it is upstream: generic/pending-5.15/540-ksmbd-only-v2-leases-handle-the-directory.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=81ea755b8fa57ce186f56f14b709cf491c2a5505 Manually Adapted the following patch: ath79/patches-5.15/900-unaligned_access_hacks.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath25: drop targetRobert Marko2024-03-07
| | | | | | | | | | | | | | ath25 has been on life support for the last couple of releases, eventually leading to marking it as source-only in 2023. It has been basically only touched to do a kernel bump so that we can make the new OpenWrt release which was a challenge due to small RAM amount. However, with the attempt of kernel 6.1 update it turns out that kernel cannot even finish booting due to RAM constraints, so its time to let this target go. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq60xx: add support for netgear wax214Dirk Buchwalder2024-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear WAX214 is a 802.11 ax dual-band AP with PoE. (similar to Engenius EWS357APV3) Specifications: • CPU: Qualcomm IPQ6010 Quad core Cortex-A53 • RAM: 512MB of DDR3 • Storage: 128MB NAND (Macronix MX30UF1G18AC) • Ethernet: 1x 1G RJ45 port (QCA8072) PoE • WIFI: 2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate 5GHz: Qualcomm QCN5052 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate • LEDs: 4 x GPIO-controlled LEDs - 1 Power LED (orange) - 1 LAN LED (blue) - 1 WIFI 5g LED (blue) - 1 WIFI 2g LED (blue) black_small_square Buttons: 1x soft reset black_small_square Power: 12V DC jack or PoE (802.3af ) An populated serial header is onboard, format is 1.25mm 4p (DF13A-4P-1.25H) RX/TX is working, bootwait is active, secure boot is not enabled. The root password of the stock firmware is unknown, but failsafe mode can be entered to reset the password. Installation Instructions: - obtain serial access - stop auto boot (press "4", Entr boot command line interface) - setenv active_fw 0 (to boot from the primary rootfs, or set to 1 to boot from the secondary rootfs partition) - saveenv - tftpboot the initramfs image - bootm - copy openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi to the device - write the image to the NAND: - cat /proc/mtd and look for rootfs partition (should be mtd11, or mtd12 if you choose active_fw 1) - ubiformat /dev/mtd11 -f -y openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi - reboot Note: the firmware is senao-based. But I was unable to build a valid senao-header into the image. Maybe they changed the header format and senaoFW isn't working any more. Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
* kernel: bump 6.1 to 6.1.80John Audia2024-03-05
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.80 Manually rebased: generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch[1] All other patches automatically rebased. 1. Acknowledgement to @heheb and @DragonBluep. Upstream commit for ref: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.80&id=9c5662e95a8dcc232c3ef4deb21033badcd260f6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* bcm27xx: use PARTUUID for root in cmdlineÁlvaro Fernández Rojas2024-03-04
| | | | | | This allows booting from USB/NVME while keeping SD compatibility. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: pass signature to partition generationÁlvaro Fernández Rojas2024-03-04
| | | | | | | Passes IMG_PART_SIGNATURE to ptgen instead of using the default "OWRT" signature. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: fix platform_copy_configÁlvaro Fernández Rojas2024-03-04
| | | | | | | /boot/kernel*.img wildcard only works without quotation marks. Fixes: 1a5e51ab0011 ("bcm27xx: base-files: fix platform_copy_config") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: drop targetÁlvaro Fernández Rojas2024-03-04
| | | | | | | | | | | | BCM63xx maintainance is a PITA since there's no full Device Tree support and therefore every board needs it's own definition in board_bcm963xx.c There's no DSA support for this board and there have been very few contributions in the last years. Moreover, BCM63xx SoCs >= BCM6358 are already supported in bmips target, so any efforts to keep this target alive aren't worth the time. Let's focus the community efforts on improving bmips instead. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mvebu: add support for SolidRun ClearFog ProTobias Schramm2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SolidRun ClearFog Pro is a router based on the SolidRun CN9130 SOM. Specs: - SoC: Quad-Core Cortex-A72 CN9130 SoC - RAM: 4GiB DDR4 - Serial: Micro-USB port on front (FT232R, 115200 8n1) - Storage: 8GiB eMMC, microSD card slot, 8MiB SPI NOR flash - Ethernet: 7x GbE (1 port dedicated on SoC, 6 port switch with single GbE CPU port) - SFP: 1x SFP+ - USB: 1x USB-A 3.1 Gen 1 - PCIe: 2x mini PCIe (one slot with USB and SIM card socket) - SATA: 1x M.2 Key-B In addition to the usual connectivity options this device also features an internal mikroBUS expansion connector. SATA is currently untested due to lack of a suitable M.2 SSD. Installation ============ 1. Write sdcard sysupgrade image to microSD card using dd or similar 2. Insert microSD card into router and apply power 3. Device boots into OpenWRT 4. (optional) dd sysupgrade image to /dev/mmcblk0 to install to eMMC Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* kernel: 6.1: backport Marvell Armada 8k AP807 cpufreq supportTobias Schramm2024-03-02
| | | | | | | | Upstream a patch adding support for cpufreq on AP807-based SoC like the CN913x was submitted. Include it in patches to ensure best performance under load and lowest power consumption in idle. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* mediatek: filogic: fix failsafe mode on devices with no lan1Paul Geraedts2024-03-02
| | | | | | | | | | | Default to lan4 port, instead of (missing) lan1 port, to fix failsafe mode on Xiaomi AX3000T, WR30U, AX6000 Build system: x86/64 Build-tested: mediatek/filogic/xiaomi_mi-router-ax3000t-ubootmod Run-tested: mediatek/filogic/xiaomi_mi-router-ax3000t-ubootmod Signed-off-by: Paul Geraedts <p.f.j.geraedts@gmail.com>
* ath79: add support for ELECOM WAB-I1750-PSINAGAKI Hiroshi2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WAB-I1750-PS is a 2.4/5 GHz band 11ac (Wi-Fi 5) access point, based on QCA9558. Specification: - SoC : Qualcomm Atheros QCA9558 - RAM : DDR2 128 MiB (2x Winbond W9751G6KB251) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FMI-10G) - WLAN : 2.4/5 GHz 3T3R - 2.4 GHz : Qualcomm Atheros QCA9558 (SoC) - 5 GHz : Qualcomm Atheros QCA9880 - Ethernet : 2x 10/100/1000 Mbps - phy ("PD") : Atheros AR8035 - phy ("PSE") : Atheros AR8033 - LEDs/keys (GPIO) : 3x/3x - UART : 2x RJ-45 port - "SERVICE" : TTL (3.3V) - port : ttyS0 - assignment : 1:3.3V, 2:GND, 3:TX, 4:RX - settings : 115200n8 - note : no compatibility with "Cisco console cable" - "SERIAL" : RS232C (+-12V) - port : ? - assignment : 1:NC , 2:NC , 3:TXD, 4:GND, 5:GND, 6:RXD, 7:NC , 8:NC - settings : 115200n8 - note : compatible with "Cisco console cable" - Buzzer : 1x GPIO-controlled - USB : 1x USB 2.0 Type-A - Power : DC jack or PoE - DC jack : 12 VDC, 1.04 A (device only, rating) - PoE : 802.3af/at, 48 VDC, 0.26 A (device only, rating) - note : supports 802.3af supply on PSE (downstream) port when powered by DC adapter or 802.3at PoE Flash instruction using factory.bin image: 1. Boot WAB-I1750-PS without no upstream connection (or PoE connection without DHCP) 2. Access to the WebUI ("http://192.168.3.1") on the device and open firmware update page ("ツールボックス" -> "ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("アップデート") button 4. Wait ~120 seconds to complete flashing Revert to OEM firmware: 1. Download the latest OEM firmware 2. Remove 128 bytes(0x80) header from firmware image 3. Decode by xor with a pattern "8844a2d168b45a2d" (hex val) 4. Upload the decoded firmware to the device 5. Flash to "firmware" partition by mtd command 6. Reboot Notes: - To use the "SERVICE" port, the connection of 3.3V line is also required to enable console output. The uart line of "SERVICE" is branched out from the internal pin header with 74HC126D and 3.3V line is connected to OE pin on it. - "SERIAL" port is provided by HS UART on QCA9558 SoC that has compatibility with qca,ar9330-uart, but QCA955x SoC's is not supported on Linux Kernel and OpenWrt. - To supply 802.3af PoE on "PSE" port when powered by DC adapter, 12 VDC 3.5 A adapter is recommended. (official: WAB-EX-ADP1) MAC addresses: Ethernet (PD, PSE): 00:90:FE:xx:xx:0A (Config, ethaddr (text)) 2.4GHz : 00:90:FE:xx:xx:0A (Config, ethaddr (text)) 5GHz : 00:90:FE:xx:xx:0B [original work] Signed-off-by: Yanase Yuki <dev@zpc.st> [update for NVMEM and others] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: add support for ELECOM WAB-S1167-PSINAGAKI Hiroshi2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WAB-S1167-PS is a 2.4/5 GHz band 11ac (Wi-Fi 5) access point, based on QCA9557. Specification: - SoC : Qualcomm Atheros QCA9557 - RAM : DDR2 128 MiB (2x Winbond W9751G6KB251) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FMI-10G) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : Qualcomm Atheros QCA9557 (SoC) - 5 GHz : Qualcomm Atheros QCA9882 - Ethernet : 2x 10/100/1000 Mbps - phy ("PD") : Atheros AR8035 - phy ("PSE") : Atheros AR8033 - LEDs/keys (GPIO) : 3x/3x - UART : 1x RJ-45 port - "SERVICE" : TTL (3.3V) - port : ttyS0 - assignment : 1:3.3V, 2:GND, 3:TX, 4:RX - settings : 115200n8 - note : no compatibility with "Cisco console cable" - Buzzer : 1x GPIO-controlled - USB : 1x USB 2.0 Type-A - Power : DC jack or PoE - DC jack : 12 VDC, 1 A (device only, rating) - PoE : 802.3af/at, 48 VDC, 0.25 A (device only, rating) - note : supports 802.3af supply on PSE (downstream) port when powered by DC adapter or 802.3at PoE Flash instruction using factory.bin image: 1. Boot WAB-S1167-PS without no upstream connection (or PoE connection without DHCP) 2. Access to the WebUI ("http://192.168.3.1") on the device and open firmware update page ("ツールボックス" -> "ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("アップデート") button 4. Wait ~120 seconds to complete flashing Revert to OEM firmware: 1. Download the latest OEM firmware 2. Remove 128 bytes(0x80) header from firmware image 3. Decode by xor with a pattern "8844a2d168b45a2d" (hex val) 4. Upload the decoded firmware to the device 5. Flash to "firmware" partition by mtd command 6. Reboot Notes: - To use the "SERVICE" port, the connection of 3.3V line is also required to enable console output. The uart line of "SERVICE" is branched out from the internal pin header with 74HC126D and 3.3V line is connected to OE pin on it. - The same PCB is used with WAB-S600-PS. - To supply 802.3af PoE on "PSE" port when powered by DC adapter, 12 VDC 3.5 A adapter is recommended. (official: WAB-EX-ADP1) MAC addresses: Ethernet (PD, PSE): 00:90:FE:xx:xx:04 (Config, ethaddr (text)) 2.4GHz : 00:90:FE:xx:xx:04 (Config, ethaddr (text)) 5GHz : 00:90:FE:xx:xx:05 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: add support for ELECOM WAB-S600-PSINAGAKI Hiroshi2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WAB-S600-PS is a 2.4/5 GHz band 11n (Wi-Fi 4) access point, based on QCA9557. This device also supports 11ac (Wi-Fi 5) with the another official firmware. Specification: - SoC : Qualcomm Atheros QCA9557 - RAM : DDR2 128 MiB (2x Winbond W9751G6KB251) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FMI-10G) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : Qualcomm Atheros QCA9557 (SoC) - 5 GHz : Qualcomm Atheros QCA9882 - Ethernet : 2x 10/100/1000 Mbps - phy ("PD") : Atheros AR8035 - phy ("PSE") : Atheros AR8033 - LEDs/keys (GPIO) : 3x/3x - UART : 1x RJ-45 port - "SERVICE" : TTL (3.3V) - port : ttyS0 - assignment : 1:3.3V, 2:GND, 3:TX, 4:RX - settings : 115200n8 - note : no compatibility with "Cisco console cable" - Buzzer : 1x GPIO-controlled - USB : 1x USB 2.0 Type-A - Power : DC jack or PoE - DC jack : 12 VDC, 1 A (device only, rating) - PoE : 802.3af/at, 48 VDC, 0.25 A (device only, rating) - note : supports 802.3af supply on PSE (downstream) port when powered by DC adapter or 802.3at PoE Flash instruction using factory.bin image: 1. Boot WAB-S600-PS without no upstream connection (or PoE connection without DHCP) 2. Access to the WebUI ("http://192.168.3.1") on the device and open firmware update page ("ツールボックス" -> "ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("アップデート") button 4. Wait ~120 seconds to complete flashing Revert to OEM firmware: 1. Download the latest OEM firmware 2. Remove 128 bytes(0x80) header from firmware image 3. Decode by xor with a pattern "8844a2d168b45a2d" (hex val) 4. Upload the decoded firmware to the device 5. Flash to "firmware" partition by mtd command 6. Reboot Notes: - To use the "SERVICE" port, the connection of 3.3V line is also required to enable console output. The uart line of "SERVICE" is branched out from the internal pin header with 74HC126D and 3.3V line is connected to OE pin on it. - The same PCB is used with WAB-S1167-PS. - To supply 802.3af PoE on "PSE" port when powered by DC adapter, 12 VDC 3.5 A adapter is recommended. (official: WAB-EX-ADP1) MAC addresses: Ethernet (PD, PSE): BC:5C:4C:xx:xx:7C (Config, ethaddr (text)) 2.4GHz : BC:5C:4C:xx:xx:7C (Config, ethaddr (text)) 5GHz : BC:5C:4C:xx:xx:7D [original work of common dtsi part for WAB-I1750-PS] Signed-off-by: Yanase Yuki <dev@zpc.st> [adding support for WAB-S600-PS] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: Unielec u7621-01: remove invalid led statusDavid Bentham2024-03-02
| | | | | | | | | | The original commit had an invalid setting of the led status for this device. There is no gpio pin connected to that led so lets remove these from the u7621-01 dtsi file. Signed-off-by: David Bentham <db260179@gmail.com>
* octeontx: update default network configTim Harvey2024-03-02
| | | | | | | | | | | Update the default network configuration for Gateworks Newport boards such that the left-most front-panel NIC is WAN and any additional are in LAN bridge: - gw610x/gw6903; single NIC: eth0 - gw620x/gw630x; two NIC's from left to right are: eth1 eth0 - gw640x; multiple NIC's from left to right: eth4 eth0 eth1 eth2 eth3 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* apm821xx: MBL DUO-only: enable USB-Storage for boot from USB supportChristian Lamparter2024-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | it is possible to boot and run OpenWrt from an image on an USB-Stick on the MyBook Live DUO. (No, the MyBook Live Single does NOT have an USB-Port and attempts at enabling it sadly all failed... so far). To do that: First, prepare a USB-Stick by writing the raw and uncompressed OpenWRT factory image for the device onto the stick (i.e. # gunzip -c openwrt-*wd_mybooklive*-factory.img.gz > /dev/sd$XX). Then enter the u-boot via an attached TTL/CMOS 3.3V cable adapter and give the following commands a try in the: usb start; sata init ext2load usb 0:1 ${fdt_addr_r} /boot/apollo3g.dtb ext2load usb 0:1 ${kernel_addr_r} /boot/uImage setenv bootargs 'root=/dev/sdc2 rw rootfstype=squashfs,ext4 rootdelay=5' run addtty; bootm ${kernel_addr_r} - ${fdt_addr_r} Notes: - booting from USB-Sticks takes a long time! Be prepared to wait a few minutes. (~3 minutes for 4 MiB /boot/uImage file on a USB 2.0 Stick) - the bootargs part 'root=/dev/sdX2' depends on how many HDDs/SSDs are slotted in. (if none: then use sda, if one: sdb. if two: sdc) - rootdelay is important as the storage on the USB-Sticks do not show up fast enough. 5 seconds might be excessive though. - it's possible to concat these commands together in one line and write it into u-boot's "bootcmd" environment variable and save the environment to make the device to always boot from USB from then on. if you have accidentally overridden the 'bootcmd' and want to return to 'spec' enter the following commands : setenv bootcmd 'run boot_sata_script_ap2nc' saveenv Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add u-boot,env compatibleChristian Lamparter2024-03-02
| | | | | | | | | | Note about the MyBook Live. The MyBook Live didn't have the encompassing fixed-partitions. This is needed for the u-boot,env compatible to be read as otherwise the kernel assumes this is a legacy NOR/NAND node and this binding is unsupported. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: remove 5.15 remnantsChristian Lamparter2024-03-02
| | | | | | deletes config-5.15 and patches-5.15/. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: make 6.1 kernel defaultChristian Lamparter2024-03-02
| | | | | | 6.1 has been available for some time for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* qualcommax: enable DEBUG_BUGVERBOSERobert Marko2024-03-01
| | | | | | | | | | Enable DEBUG_BUGVERBOSE by default on qualcommax as without it once BUG() is called we will not get any output other than "------------[ cut here ]------------" which is not usefull at all, so since we dont have kernel size constraints lets enable it by default. Signed-off-by: Robert Marko <robimarko@gmail.com>
* layerscape: remove 5.15 kernel supportPawel Dembicki2024-03-01
| | | | | | Kernel was switched to 6.1. Lets drop 5.15 support. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Powered by cgit, Themed by Ted Yin.