aboutsummaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAge
* realtek: disable otto timer for RTL93xx targetsMarkus Stockhausen2022-10-23
| | | | | | | | | The new timer is not yet ready for all targets. Avoid interactive questions during build Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [rename symbol to CONFIG_REALTEK_OTTO_TIMER] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: timer driver: activate for RTL839X devicesMarkus Stockhausen2022-10-23
| | | | | | | | | Use the new timer driver for the RTL839X devices and remove the no longer needed modules. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct timer compatible order, update selected symbols] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: timer driver: activate for RTL838X devicesMarkus Stockhausen2022-10-23
| | | | | | | | | Use the new timer driver for the RTL838X devices. Remove the no longer needed modules. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct timer compatible order, update selected symbols] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: timer driver: documentationMarkus Stockhausen2022-10-23
| | | | | | | | | Provide some helpful information about the devicetree configuration of our new driver Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct compatible order in examples] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: resurrect timer driverMarkus Stockhausen2022-10-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we provide a clock driver for the Reltek SOCs the CPU frequency might change on demand. This has direct visible effects during operation - the CEVT 4K timer is no longer a stable clocksource - after CPU frequencies changes time calculation works wrong - sched_clock falls back to kernel default interval (100 Hz) - timestamps in dmesg have only 2 digits left [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps ... [ 0.060000] pid_max: default: 32768 minimum: 301 [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.080000] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.090000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ... Looking around where we can start the CEVT timer for RTL930X is a good basis. Initially it was developed as a clocksource driver for the broken timer in that specific SOC series. Afterwards it was shifted around to the CEVT location, got SMP enablement and lost its clocksource feature. So we at least have something to copy from. As the timers on these devices are well understood the implementation follows this way: - leave the RTL930X implementation as is - provide a new driver for RTL83XX devices only - swap RTL930X driver at a later time Like the clock driver this patch contains a self contained module that is SOC independet and already provides full support for the RTL838X, RTL839X and RTL930X devices. Some of the new (or reestablished) features are: - simplified initialization routines - SMP setup with CPU hotplug framework - derived from LXB clock speed - supplied clocksource - dedicated register functions for better readability - documentation about some caveats Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [remove unused header includes, remove old CONFIG_MIPS dependency, add REALTEK_ prefix to driver symbol] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ipq40xx: Convert Google Wifi to DSA, reenableBrian Norris2022-10-23
| | | | | | | | | | | | | | | | Undo parts of these: 116feb4a1cad ipq40xx: remove non-converted network configs db19efee9512 ipq40xx: disable boards not converted to DSA Reintroduce the DT paths /soc/edma@c080000/gmac{0,1}, because the stock bootloader has memorized them (instead of following aliases); then plug the MAC address back in via 05_set_iface_mac_ipq40xx.sh, since the 'local-mac-address' property is no longer in the correct node. Cc: David Bauer <mail@david-bauer.net> Cc: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ipq40xx: convert to DSA and enable mobipromo,cm520-79fJack Chen2022-10-23
| | | | | | | Convert to DSA and enable the MobiPromo CM520-79F device again. Signed-off-by: Jack Chen <redchenjs@live.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ath79: fix reference clock for RouterBoard 912UAGPavel Kamaev2022-10-23
| | | | | | | | | | This fixes reference clock frequency of RB912. 25 MHz frequency leads to system clock running too fast, uptime incrementing too fast and delays (like `sleep 10`) returning too early. Board has quartz with NSK 3KHAA Z 40 000 marking. Signed-off-by: Pavel Kamaev <pavel@kamaev.me>
* ramips: fix WAN mac address allocation for Unielec 01 and 06 modelsDavid Bentham2022-10-23
| | | | | | | | | | | | | | | | | | | | | | Manufacturer has predetermined mac address values for lan and wan ports. This change keeps inline with other mt7621 devices mac address allocation from factory mtd partition. Example from hexdump output: 0xe000 0x6 (lan) - 0xe006 0x6 (wan) 0000e000 70 b3 d5 10 02 96 70 b3 d5 10 02 95 ff ff ff ff Previous change had created an overlapping mac address situation as it would increment by one based on the lan mac address location found in the factory partition, which would sometimes increment to the same as the mt7603 wifi chip. Tested on Unielec u7621-01 model Signed-off-by: David Bentham <db260179@gmail.com>
* ramips: rt3883: enable lzma-loader for Belkin F9K1109v1Robert Senderek2022-10-23
| | | | | | | Fixes boot loader LZMA decompression issues Fixes: #10968 Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
* ramips: mt7621: enable lzma-loader for Asus RT-N56U-B1Alex Khodin2022-10-23
| | | | | | | | Fixes boot loader LZMA decompression issues. Without this change the board end up in a boot loop. Signed-off-by: Alex Khodin <mxktz1@gmail.com>
* ramips: add A-040W-Q alternative name for MSG1500 X.00Chukun Pan2022-10-23
| | | | | | | The hardware of Nokia A-040W-Q and RAISECOM MSG1500 X.00 are exactly the same, both of which are customized by operators. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: move mac-address-ascii patches to genericChukun Pan2022-10-23
| | | | | | | This enables other targets to use the mac-address-ascii feature. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* lantiq: add 6.1 tag to upstream patchAleksander Jan Bajkowski2022-10-23
| | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: Add Linux 5.15 as testing kernel versionMartin Blumenstingl2022-10-22
| | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: 5.15: refresh patchesMartin Blumenstingl2022-10-22
| | | | | | | | | | | | | | | 0001-MIPS-lantiq-add-pcie-driver.patch needs to drop MODULE_SUPPORTED_DEVICE because that macro is gone on newer kernels. Add checks for copy_{to,from}_user in 0008-MIPS-lantiq-backport-old-timer-code.patch which is now mandatory. 0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch get dropped because it's a backport from Linux 5.13. All other patches are refreshed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: copy Linux 5.10 files in preparation for Linux 5.15 supportMartin Blumenstingl2022-10-22
| | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ipq40xx: convert to DSA and enable asus,rt-ac42uChen Minqiang2022-10-22
| | | | | | | This convert board asus,rt-ac42u to DSA and re-enable it Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* kernel: Add missing kernel configuration optionsHauke Mehrtens2022-10-22
| | | | | | | The at91/sam9x targets misses these configuration options when using kernel 5.15. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: kernel v5.15: use KERNEL_TESTING_PATCHVER:=5.15Claudiu Beznea2022-10-22
| | | | | | Use KERNEL_TESTING_PATCHVER:=15 for at91 targets. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: kernel v5.10: refresh configsClaudiu Beznea2022-10-22
| | | | | | Refresh kernel v5.10 configs. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: kernel v5.15: refresh configsClaudiu Beznea2022-10-22
| | | | | | Refresh kernel v5.15 configs. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: kernel v5.15: remove upstreamed patchesClaudiu Beznea2022-10-22
| | | | | | Remove patches that are now integrated in kernel v5.15. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: kernel v5.15: copy config and patches from 5.10Claudiu Beznea2022-10-22
| | | | | | | | Copy kernel config and patches from 5.10. Along with it individual targets' config-default from 5.10 has been moved to config-5.10. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* oxnas: shuttle-kd20: fix thermal zoneDaniel Golle2022-10-21
| | | | | | | Fix typo ('_' vs '-') and add #cooling-cells to gpio-fan to get thermal zone into functional state. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: switch to Linux 5.15 and drop Linux 5.10Daniel Golle2022-10-21
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic configAleksander Jan Bajkowski2022-10-21
| | | | | | | | | | | | | | | | | | | | | | | | | Endianness depends on CPU architecture. CONFIG_CPU_(BIG/LITTLE)_ENDIAN should be enabled on target or subtarget based on SoC architecture. Fixes warning: $ make kernel_oldconfig CONFIG_TARGET=subtarget ... .config:1008:warning: override: CPU_LITTLE_ENDIAN changes choice state .... Summary: - ARC - only the CONFIG_CPU_BIG_ENDIAN symbol is defined for this architeture. If it is disabled then the processor operates in LITTLE_ENDIAN mode (default), - ARM32 - CONFIG_CPU_LITTLE_ENDIAN symbol available since kernel 5.19. This option should be enabled after OpenWRT moves to kernel 6.x. After refreshing the kernel, the symbol disappears, - ARM64 - enabled CONFIG_CPU_LITTLE_ENDIAN, - MIPS - enabled relevant symbols, - POWERPC - enabled CONFIG_CPU_BIG_ENDIAN, - UML - Symbols are not defined for this architecture, - X86 - always little endian. Symbols are not defined for this architecture. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: add rgmii delays on BT Home Hub 5AAleksander Jan Bajkowski2022-10-21
| | | | | | | | | | | | This comit fixes warnings that occur on kernel 5.15: ... [ 2.269736] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 1e108000.switch-mii:00: PHY has delays (e.g. via pin strapping), but phy-mode = 'rgmii' [ 2.269736] Should be 'rgmii-id' to use internal delays txskew:1500 ps rxskew:1500 ps ... Ref: https://github.com/torvalds/linux/commit/be393dd685d215d44a43f5c5dcb8f7e57668d00e Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* bcm53xx: only fixup seama on D-Link DIR-885LLinus Walleij2022-10-21
| | | | | | | | | | | | Just one device builds seama images so let's just fix up seama on that one device. I guess the tool errors out but this feels cleaner. Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [rmilecki: drop "fixtrx" from D-Link case] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: enable Broadcom 4366b1 firmware for Asus RT-AC88UArınç ÜNAL2022-10-21
| | | | | | | | | | | | On some of the hardware revisions of Asus RT-AC88U, brcmfmac detects the 4366b1 wireless chip and tries to load the firmware file which doesn't exist because it's not included in the image. Therefore, include firmware for 4366b1 along with 4366c0. This way, all hardware revisions of the router will be supported by having brcmfmac use the firmware file for the wireless chip it detects. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* mediatek: filogic: consolidate adc '32k' clockDaniel Golle2022-10-20
| | | | | | | | | | Add dependency to '32k' ADC clock so it is always enabled for thermal and raw access to ADC values. This allows to remove the patch for the ADC driver and reduce the patch adding thermal support for MT7986 to only add the new efuse layout and temperature decoding for V3. Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* pistachio: refresh kernel patchesPetr Štetiar2022-10-20
| | | | | | | | Refresh dirty patches after commit 711f1a8bcbdd ("kernel: mtd: backport SafeLoader parser"). Fixes: 711f1a8bcbdd ("kernel: mtd: backport SafeLoader parser") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: refresh kernel patchesPetr Štetiar2022-10-20
| | | | | | | | Refresh dirty patches after commit 711f1a8bcbdd ("kernel: mtd: backport SafeLoader parser"). Fixes: 711f1a8bcbdd ("kernel: mtd: backport SafeLoader parser") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mt7622: switch default CPU governor to ondemandJohn Audia2022-10-20
| | | | | | | | | | | | | | | | | | The most common CPU governor in the OpenWRT project is currently ondemand (see below). Switch mt7622 over to it as well. Audit the code by running the following and then analyzing the results: find -name 'config-5.*' -print0 | xargs -0 grep 'CONFIG_CPU_FREQ_DEFAULT_GOV.*=y' ondemand: 16 performance: 5 schedutil: 5 userspace: 2 Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: clean up platform kernel modulesDaniel Golle2022-10-19
| | | | | | | | | | | | | | Remove kmod-sdhci-mtk as the mtk-sd driver is built-in anyway for the relevant subtargets in order to support mounting rootfs from eMMC or SD card. Add kmod-iio-mt6577-auxadc to support reading the raw values from the auxadc unit used as in-SoC thermal sensor. This driver was previously built-in, but as thermal itself works well without it there is no use for it in every day use of a device. Build the module to still allow access to the raw values for those who need it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: kndrt31r19: set up wan interface by defaultAndrey Butirsky2022-10-19
| | | | | | The only WAN port of the device is it's modem, so set it up as such Signed-off-by: Andrey Butirsky <butirsky@gmail.com>
* ipq40xx: Convert mikrotik,wap-ac to DSAMark Mentovai2022-10-19
| | | | | | | | | | | | | | | | | | As done previously, this preserves the MAC addresses of they physical Ethernet ports. The interfaces are renamed as eth0 is in use for the native GMAC; the new interface naming matches the physical port labels. - sw-eth1 corresponds to the physical port labeled ETH1 and has the base MAC address. This port can be used to power the device. - sw-eth2 corresponds to the physical port labeled ETH2 and has a MAC address one greater than the base. As this device has 2 physical ports, they are each connected to their respective PHYs, allowing the link status to be visible to software. Since they are not marked on the case with any role (such as LAN or WAN), both are bridged to the lan network by default, although this can easily be changed if needed. Signed-off-by: Mark Mentovai <mark@mentovai.com>
* ath79: improve MAC address configuration of ELECOM devicesINAGAKI Hiroshi2022-10-19
| | | | | | | | Get MAC address of WAN from HW.WAN.MAC.Address in hwconfig partition instead of calculated one from wlan's address. And added label_mac. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: use NVMEM for wlan caldata on ELECOM devicesINAGAKI Hiroshi2022-10-19
| | | | | | | | Use NVMEM "calibration" implementation for ath9k/ath10k(-ct) on ELECOM WRC-300GHBK2-I and WRC-1750GHBK2-I/C instead of mtd-cal-data property or user-space script. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: use ARTIFACTS for initramfs-factory of ELECOM devicesINAGAKI Hiroshi2022-10-19
| | | | | | | | | | Use ARTIFACTS to generate factory image of the following ELECOM devices instead of redundant recipe which generate on KERNEL_INITRAMFS. - ELECOM WRC-300GHBK2-I - ELECOM WRC-1750GHBK2-I/C Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* build: move Build/edimax-header to image-commands.mkINAGAKI Hiroshi2022-10-19
| | | | | | | | | | To use from the following devices in ath79 target, move edimax-header to image-commands.mk. - ELECOM WRC-300GHBK2-I - ELECOM WRC-1750GHBK2-I/C Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* x86: switch to 5.15 as default kernelNick Hainke2022-10-19
| | | | | | | | | | | | | | | Set 5.15 as default kernel. Testing support was already added on 29.03.2021. Testing support was added in 9b3bc5d11978 ("x86: enable 5.15 as testing kernel"). [0] - https://github.com/torvalds/linux/commit/edd602146507532c1714d8428f654b87205f492e Tested-by: Mark Mentovai <mark@mentovai.com> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Tested-by: Thomas Huehn <thomas.huehn@hs-nordhausen.de> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: mt7622: don't rely on existing image for sysupgradeDaniel Golle2022-10-19
| | | | | | | | Don't reply on mapped rootfs partition but rather just take what ever has been set to the kernel cmdline root= parameter as a hint to decide which media to install sysupgrade to on the BananaPi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: kernel config fixesDaniel Golle2022-10-19
| | | | | | | | | | | * remove orphaned Kconfig symbol now that CONFIG_IIO is no longer selected after commit ef8b935c95 ("mediatek: clean up mt7622 kernel config") * select UBI fast-map feature to decrease boot time and keep the number of spare blocks required in sync with U-Boot's expectations (we got fast-map enabled in U-Boot) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: update pending and rename merged patchDaniel Golle2022-10-19
| | | | | | | Add patch headers and description for pending patch. Add version tag to patch already merged upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: mtd: backport SafeLoader parserRafał Miłecki2022-10-19
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: mtd: backport extended dynamic partitions supportRafał Miłecki2022-10-19
| | | | | | | This gets rid of "nvmem-cells" limitation. Dynamic partitions can be defined for any (sub)partitions layout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: mtd: fix unbalanced of_node_put() in dynamic partitions codeRafał Miłecki2022-10-19
| | | | | Fixes: 1a9ee367343ed ("kernel: backport mtd dynamic partition patch") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: 5.15: add missing tag for some backports patchesChristian Marangi2022-10-18
| | | | | | | | Add for mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch and hwmon-lm70-Add-ti-tmp125-support.patch the 5.18 tag as it was merged in kernel 5.18. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: add 6.1 tag to upstream patchChristian Marangi2022-10-18
| | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.