aboutsummaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAge
...
* ath79: switch default kernel to 6.1Shiji Yang2024-03-13
| | | | | | The 6.1 kernel has been tested for over half a year. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add support for Z-ROUTER ZR-2660Mikhail Zhilkin2024-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Z-ROUTER ZR-2660 (also known as Routerich AX1800) wireless WiFi 6 router. Specification ------------- - SoC : MediaTek MT7621AT, MIPS, 880 MHz - RAM : 256 MiB - Flash : NAND 128 MiB (AMD/Spansion S34ML01G2) - WLAN : - 2.4 GHz : MediaTek MT7905D/MT7975 (14c3:7916), b/g/n/ax, MIMO 2x2 - 5 GHz : MediaTek MT7915E (14c3:7915), a/n/ac/ax, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x4 (1x WAN, 3x LAN) - USB : 1x 2.0 - UART : 3.3V, 115200n8, pins are silkscreened on the pcb - Buttons : 1x Reset - LEDs : 1x WiFi 2.4 GHz (green) 1x WiFi 5 GHz (green) 1x LAN (green) 1x WAN (green) 1x WAN no-internet (red) - Power : 12 VDC, 1 A Installation ------------ 1. Run tftp server on your PC (IP: 192.168.2.2) and put OpenWrt initramfs image (initramfs.bin) to the tftp root dir 2. Open the following link in the browser to enable telnet: http://192.168.2.1/cgi-bin/telnet_ssh 3. Connect to the router (default IP: 192.168.2.1) using telnet shell (credentials - user:admin) 4. Run the following commands in the telnet shell (this will install OpenWrt initramfs image on nand flash): cd /tmp tftp -g -r initramfs.bin 192.168.2.2 mtd write initramfs.bin firmware mtd erase firmware_backup reboot 5. Copy OpenWrt sysupgrade image (sysupgrade.bin) to the /tmp dir of the router 6. Connect to the router (IP: 192.168.1.1) using ssh shell and run sysupgrade command: sysupgrade -n /tmp/sysupgrade.bin Return to stock --------------- 1. Copy stock firmware (stock.bin) to the /tmp dir of the router using scp 2. Run following command in the router shell: cd /tmp mtd write stock.bin firmware reboot Recovery -------- Connect uart (pins are silkscreened on the pcb), interrupt boot process by pressing any key, use u-boot menu to flash stock firmware image or OpenWrt initramfs image. MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | 24:0f:5e:xx:xx:4c | label | | WAN | 24:0f:5e:xx:xx:4d | label+1 | | WLAN 2g | 24:0f:5e:xx:xx:4e | label+2 | | WLAN 5g | 24:0f:5e:xx:xx:4f | label+3 | +---------+-------------------+-----------+ The WLAN 2.4 MAC was found in 'factory', 0x4 The LAN MAC was found in 'factory', 0xfff4 The WAN MAC was found in 'factory', 0xfffa Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* kernel: config: 6.6: disable ZSTD debug info compression by defaultRobert Marko2024-03-12
| | | | | | | | | | | | | When kernel 6.6 is being compiled with GCC13 it will prompt for: Compressed Debug information > 1. Don't compress debug information (DEBUG_INFO_COMPRESSED_NONE) 2. Compress debugging information with zlib (DEBUG_INFO_COMPRESSED_ZLIB) 3. Compress debugging information with zstd (DEBUG_INFO_COMPRESSED_ZSTD) (NEW) This is because kernel now also has support for compressing debug info with ZSTD, so add the missing symbol and disable it by default. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ramips: add support for YunCore G720Daniel Golle2024-03-12
| | | | | | | | | | | | | | | | | | | | The YunCore G720 is a dual band 802.11ax router with 5 GbE ports. Specs: - SoC: MediaTek MT7621 - Ethernet: 5x GbE ports (built-in MT7530) - Wireless 2.4GHz / 5GHz: MediaTek MT7915E - RAM: 256MiB - ROM: 16MiB (W25Q128) - 1 Button (reset) - 8 LEDs (1x system, 2x wifi, 5x switch ports) Flash instructions: The vendor firmware is based on OpenWrt, the sysupgrade image can be flashed using the '-F' (force) option on the CLI. Make sure not to keep settings when doing so. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: switch to 6.1 kernelNick Hainke2024-03-12
| | | | | | | We have had the testing kernel for several weeks now. Let's switch to 6.1 to have more testers. Additionally, 6.6 is already in the pipeline. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: config: add missing symbol for kenrel 6.6Weijie Gao2024-03-12
| | | | | | | | | | | | CONFIG_HID_SUPPORT: Set default value for kmod-hid CONFIG_USB_CDNS3_IMX: CONFIG_USB_CDNS3_PCI_WRAP: CONFIG_USB_CDNSP_PCI: Introduced by db0d7cf6a1 (usb: add cdns3 support) Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* Revert "kernel: config: add symbol introduced with 6.2"Robert Marko2024-03-12
| | | | | | | | | This reverts commit 7ea82bc17d1583f4d9d46397846b0eb63e6651eb. This commit does not meet formal requirments, and has been merged due to my error. Signed-off-by: Robert Marko <robimarko@gmail.com>
* starfive: refresh patchesRobert Marko2024-03-12
| | | | | | CI reported that patches need to be refreshed, so lets refresh. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: config: add symbol introduced with 6.2CharlesMengCA2024-03-12
| | | | | | | | CONFIG_DEBUG_INFO_COMPRESSED_ZSTD, required by GCC 13.0+ Compress the debug information using zstd. This may provide better compression than zlib, for about the same time costs, but requires newer toolchain support. Requires GCC 13.0+ or Clang 16.0+, binutils 2.40+, and zstd. Signed-off-by: CharlesMengCA <58993776+CharlesMengCA@users.noreply.github.com>
* mediatek: add Linux 6.6 as testing kernelDaniel Golle2024-03-11
| | | | | | Add KERNEL_TESTING_PATCHVER for Linux 6.6. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add kernel configs for Linux 6.6Daniel Golle2024-03-11
| | | | | | Add config-6.6 for all mediatek subtargets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix build of MT7988 clk drivers on Linux 6.6Daniel Golle2024-03-11
| | | | | | | As shared remove functions now returns void instead of int we need to use .remove_new instead of .remove. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: leds-smartrg-system: fix build on Linux 6.6Daniel Golle2024-03-11
| | | | | | Adapt to changed function pointer prototypes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: 6.6: refresh patchesDaniel Golle2024-03-11
| | | | | | | Refresh patches and fix changed path for 32-bit mediatek boards 'arch/arm/dts' -> 'arch/arm/dts/mediatek' Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: 6.6: drop patches backported as fixesDaniel Golle2024-03-11
| | | | | | Drop patches backported as fixes in later kernel version. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: 6.6: drop backport patchesDaniel Golle2024-03-11
| | | | | | Drop all backport patches that are now included in kernel 6.6. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: copy patches-6.1 to patches-6.6Daniel Golle2024-03-11
| | | | | | Copy patches from patches-6.1 to patches-6.6. No changes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: copy files-6.1 to files-6.6Daniel Golle2024-03-11
| | | | | | Copy files from files-6.1 to files-6.6. No changes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.6: fix copy & refreshDaniel Golle2024-03-11
| | | | | | | A new patch was added meanwhile which will go as fix via netdev tree. Copy & refresh it for Linux 6.6 as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: config: add symbol introduced with 6.1.81John Audia2024-03-11
| | | | | | | | Add CONFIG_EFI_HANDOVER_PROTOCOL=y to the default config[1] and disable CONFIG_NFSD_V2 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v6.1.81&id2=v6.1.80 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.81John Audia2024-03-11
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.81 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.6: fix realtek PHY detection patchDaniel Golle2024-03-11
| | | | | | | Avoid crashing the kernel when trying to detect early versions of RealTek RTL8221B 2.5G Ethernet PHY. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.6: fix uncompressed kallsymsRobert Marko2024-03-11
| | | | | | | | | | | | | | | Currently, the existing uncompressed kallsym support is causing qualcommax boards to hang on boot, and only after earlycon and verbose BUG() prints are enabled the trace is visible: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at kernel/kallsyms.c:340! [ 0.000000] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Felix has fixed up the uncompressed kallsyms support so modify the current patch with the fix. All credits for the code go to Felix. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: v6.6: update fitblk driver to work with Linux 6.6Daniel Golle2024-03-11
| | | | | | | Update fitblk driver which has previously been backported to Linux 6.1 so it can build and work with Linux 6.6. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.6: refresh config symbolsWeijie Gao2024-03-11
| | | | | | | | | | Sort generic config for 6.6. The sort commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-6.6 /dev/null > target/linux/generic/config-6.6-new $ mv target/linux/generic/config-6.6-new target/linux/generic/config-6.6 Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: add missing symbolsWeijie Gao2024-03-11
| | | | | | | | Add missing symbols to config for 6.6. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: refresh hack patchesWeijie Gao2024-03-11
| | | | | | Refresh hack patches with make target/linux/refresh. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: refresh pending patchesWeijie Gao2024-03-11
| | | | | | Refresh pending patches with make target/linux/refresh. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: refresh backport patchesWeijie Gao2024-03-11
| | | | | | Refresh backport patches with make target/linux/refresh. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: manually refresh hack patchesWeijie Gao2024-03-11
| | | | | | Refresh hack patches for kernel 6.6. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: manually refresh pending patchesWeijie Gao2024-03-11
| | | | | | | Refresh pending patches for kernel 6.6. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: manually refresh backport patchesWeijie Gao2024-03-11
| | | | | | Refresh backport patches that still needs to be merged for kernel 6.6. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: drop pending patch backported as fixesWeijie Gao2024-03-11
| | | | | | Drop pending patch backported as fixes in later kernel version. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: 6.6: drop backport patchesWeijie Gao2024-03-11
| | | | | | Drop all backport patches that are now included in kernel 6.6. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* generic: copy backport, hack, pending patch and config from 6.1 to 6.6Weijie Gao2024-03-11
| | | | | | Copy backport, hack, pending patch and config from 6.1 to 6.6. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* mediatek: mt7988: fix clk for 2nd PCIe portDaniel Golle2024-03-11
| | | | | | | | | | | | | Due to what seems to be an undocumented oddity in MediaTek's MT7988 SoC design the CLK_INFRA_PCIE_PERI_26M_CK_P2 clock requires CLK_INFRA_PCIE_PERI_26M_CK_P3 to be enabled. This currently leads to PCIe port 2 not working in Linux. Reflect the apparent relationship in the clk driver to make sure PCIe port 2 of the MT7988 SoC works. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: mtk_eth_soc: release MAC_MCR_FORCE_LINK only when MAC is upDaniel Golle2024-03-11
| | | | | | | | | | | Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early can result in MAC ending up in a broken/blocked state. Fix this by handling this bit in the .mac_link_up and .mac_link_down calls instead of in .mac_finish. Suggested-by: Mason-cw Chang <Mason-cw.Chang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: linksys-e8450: set driving strength for SPI-NANDDaniel Golle2024-03-11
| | | | | | | Set 12mA driving strength for SPI-NAND pins like the stock firmware's bootloader does as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bmips: add support for SmartRG SR505nKyle Hendry2024-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - SoC: Broadcom BCM63168 dual 400MHz MIPS - Flash: 16MB SPI NOR W25Q128WFG - RAM: 128MB DDR3 W631GG6KB-15 - Ethernet: 1x 1000M, 3x 100M - Wifi: BCM435F - 1x USB 2.0 port - 3x Button - 12x LED Flashing via serial - Connect to the 3.3V TTL UART on the board (J6 pinout Vcc Rx Tx Gnd) at 115200-8-N-1 - Press any key in the serial console when powering up the board to enter the CFE prompt - Configure an interface on your workstation to static IP 192.168.1.100 and connect it to the board - Start a TFTP server with the firmware image - On the CFE prompt, enter the command "f 192.168.1.100:openwrt-bmips-bcm63268-smartrg_sr505n-squashfs-cfe.bin" Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com> [Remove unneeded LED labels] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* starfive: add new target for StarFive JH7100/7110 SoCZoltan HERPAI2024-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This target adds support for the StarFive JH7100 and JH7110 SoCs, based on 6.1, as well as a couple boards equipped with these. Specifications: SoCs: JH7100: - StarFive JH7100 dual-core RISC-V (U74, RC64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache JH7110: - StarFive JH7110 quad-core RISC-V (U74, RV64GC) - additional monitoring (S7) and control (E24) cores - 2Mb L2 cache Boards: VisionFive1: - JH7100 @ 1GHz - Memory: 8Gb LPDDR4 - 4x USB3.0 - 1x GBit ethernet - AMPak 6236 wifi / bluetooth - audio - powered via USB-C VisionFive2: - JH7110 @ 1.5GHz - Memory: 2/4/8Gb DDR4 - 2x Gbit ethernet - 2x USB3.0 / 2x USB2.0 - eMMC / SDIO - various multimedia input/outputs (MIPI CSI, HDMI, audio) - M.2 key M slot - PoE support - powered via USB-C Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* usb: add cdns3 supportZoltan HERPAI2024-03-10
| | | | | | | | | | CDNS3 is a SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD) controller from Cadence. Add support for this device, and add the required symbols into the generic configs. Compile-tested: apm821xx, bcm4908, imx, mpc85xx, pistachio, starfive Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ramips: improve support for STORYLiNK SAP-G3200U3Sungbo Eo2024-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Increase flash SPI frequency to 50MHz The maximum SPI frequency of MX25L6406EM2I is 86 MHz, but in this patch 50 MHz was chosen as a safe value. * Update Ethernet MAC addresses Till now LAN/WAN MAC addresses were flipped compared to stock firmware. * Fix Wi-Fi LEDs by adding mt76 led nodes * Fix LAN port order LAN ports are in reverse order of switch ports. * Fix the well-known "LZMA ERROR 1" error by using lzma-loader * Set uImage name, which enables installation via stock web interface: 1. Upload **initramfs** image file to the web page. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add factory image for ipTIME AX2004MSungbo Eo2024-03-10
| | | | | | | | | | | | | Unlike the recovery image, this initramfs-factory image can be flashed using the stock firmware web interface (from any active boot partition), as well as the bootloader recovery web page. Drop the recovery image in favor of the factory image. Installation via stock/recovery web interface: 1. Flash **initramfs-factory** image through the web page. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt7621: use variable for relocate-kernel argumentSungbo Eo2024-03-10
| | | | | | | | The "0x80001000" address logically comes from "loadaddr-y" variable for mt7621 subtarget. Let's replace the hardcoded value with the predefined variable. This change is purely cosmetic. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: rename mtd partition of ipTIME NAND devicesSungbo Eo2024-03-10
| | | | | | | | | | | | Contrary to common ipTIME NOR devices, the "Config" partition of T5004 and AX2004M contain normal U-Boot environment variables. Renaming the partition into "u-boot-env" serves for better description, and it also conforms to common naming practice in OpenWrt. This patch might also be extended to A3004T, but its u-boot-env partition layout has not been confirmed yet. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add NMBM support for ipTIME AX2004MSungbo Eo2024-03-10
| | | | | | | | | | | | | | | | AX2004M uses NMBM on its NAND flash, but it was not enabled in DTS as the device support [1] had been added before NMBM feature in mtk_bmt driver [2]. Let's enable it now. With this change, there is a low possibility of boot failure after sysupgrade from older versions. As AX2004M already has gone through two stable releases in the meantime, it would be safe to warn users by bumping DEVICE_COMPAT_VERSION. [1] 37753f34ac68 ("ramips: add support for ipTIME AX2004M") [2] 06382d1af7b2 ("kernel: add support for mediatek NMBM flash mapping support") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: add support for D-Link COVR-C1200 A1Sebastian Schaper2024-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The COVR-C1200 devices are sold as "Whole Home Mesh Wi-Fi" sets in packs of two (COVR-C1202) and three (COVR-C1203). Specifications: * QCA9563, 16 MiB flash, 128 MiB RAM, 2x3:2 802.11n * QCA9886 2x2:2 801.11ac Wave 2 * AR8337, 2 Gigabit ports (1: WAN; 2: LAN) * USB Type-C power connector (5V, 3A) Installation COVR Point A: * In factory reset state: OEM Web UI is at 192.168.0.50 no DHCP, skip wizard by directly accessing: http://192.168.0.50/UpdateFirmware_Simple.html * After completing setup wizard: Web UI is at 192.168.0.1 DHCP enabled, login with empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Installation COVR Points B: * OEM Web UI is at 192.168.0.50, no DHCP, empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Recovery: * Keep reset button pressed during power on * Recovery Web UI is at 192.168.0.50, no DHCP * Flash factory.bin used to work best with Chromium-based browsers or curl: curl -F firmware=@factory.bin \ http://192.168.0.50/upgrade.cgi since this fails to work on modern Linux systems, there is also a script dlink_recovery_upload.py Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: split dtsi for D-Link COVR-P2500Sebastian Schaper2024-03-09
| | | | | | in preparation of adding COVR-C1200 Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* Revert "ipq-wifi: fix upstream board-2.bin ZTE M289F snafu"Christian Lamparter2024-03-09
| | | | | | | This reverts commit 75505c5ec724b9b961dcb411bac1d4b9aede3e1d. The issue has been fixed upstream. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mediatek: linksys-e8450: improve compat warningDaniel Golle2024-03-09
| | | | | | | Include a statement about having to run the installer in the sysupgrade compat warning for the Linksys E8450 (UBI). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Powered by cgit, Themed by Ted Yin.